MN MODEL Bee25

Contents

SpeedyBee Bee25 Frame Protection Ring User Manual

Model: Bee25 | Brand: MN MODEL

1. Introduction

1.1 Product Composition

The SpeedyBee Bee25 Frame Protection Ring is an accessory designed for drones. It is typically part of a larger kit that may include the main drone, remote controllers, rechargeable battery packs (for some models), chargers (for some models), and manuals. Please verify that all components are present upon unpacking. In case of missing or damaged parts, contact your dealer or the manufacturer's after-sales service department.

1.2 Applicable Age

This product is suitable for users aged 14 years and above.

1.3 Product Features

  • Multi-channel Remote Control: Supports various operations such as forward, backward, left turn, right turn, acceleration (on some models), stunt actions (on some models), flexible control, and quick response.
  • High-Quality Material: Constructed from environmentally-friendly and fall-resistant ABS engineering plastic, ensuring a smooth surface without burrs, bright color, and resistance to fading.
  • Long Battery Life: Equipped with large-capacity rechargeable batteries (for some models), allowing for 20-30 minutes of continuous use after a full charge. Actual battery life may vary by model.
  • Safety Design: Features a low-voltage power supply system to minimize electric shock risk. The remote control signal is stable, offering an effective control distance of 20-50 meters in obstacle-free environments, preventing the toy from going out of range.

2. Setup and Preparation

2.1 Remote Control Battery Installation

  1. Open the battery compartment cover located on the back of the remote controller.
  2. Insert three AA (No. 5) alkaline batteries, ensuring correct polarity according to the '+' and '-' markings inside the compartment. (Batteries are not included and must be purchased separately).
  3. Securely close the battery compartment cover, ensuring the buckle is fully engaged to prevent accidental battery dislodgement.
  4. Important: Do not mix different brands, models, or old and new batteries to prevent leakage, short circuits, and potential damage to the remote controller.

2.2 Toy Main Body Power Supply

The drone's power supply method depends on the specific model. Refer to the instructions below:

Method 1: Using a Rechargeable Battery Pack (if equipped)

  1. Open the battery compartment of the drone body.
  2. Insert the rechargeable battery pack, observing the correct polarity.
  3. Close the battery compartment cover securely.
  4. Connect the charger's output end to the drone's charging interface and its input end to a household 220V AC power supply. The charger's indicator light will illuminate, indicating charging has begun.
  5. Charging typically takes 2-3 hours. Once charging is complete, the indicator light will change from red to green (on some models). Disconnect the power supply and unplug the charger promptly to prevent overcharging and battery damage.
  6. Rechargeable battery packs are reusable. If the drone's speed noticeably decreases or it fails to start normally, the battery needs recharging.

Method 2: Using Ordinary Batteries (if rechargeable battery pack is not included)

  1. Open the battery compartment of the drone body.
  2. Insert the specified number of AA (No. 5) or AAA (No. 7) alkaline batteries, observing the polarity markings.
  3. Close the battery compartment cover securely.
  4. Replace batteries promptly when power is low. Dispose of used batteries responsibly according to environmental regulations.

2.3 Remote Control Pairing

  1. Turn on the power switches for both the remote controller and the drone. The remote controller's indicator light will illuminate, and the drone may emit a startup sound (on some models), indicating power is on.
  2. Allow 3-5 seconds for automatic pairing between the remote controller and the drone. Once paired, the drone can be controlled.
  3. If pairing fails, turn off both devices, then turn them on again to re-attempt pairing. Also, ensure that the batteries in both devices have sufficient power.

3. Operation Instructions

The remote controller features a user-friendly design with clear key layouts. The following describes the specific functions of the keys (using a remote control car as an example; other models may have similar adjustments):

3.1 Direction Control Keys

  • Forward Key: Press to move the drone forward at a constant speed. Release to stop.
  • Back Key: Press to move the drone backward at a constant speed. Release to stop.
  • Turn Left Key: Press to turn the drone left. Can be combined with the forward key for left-front movement. Release to resume straight movement.
  • Turn Right Key: Press to turn the drone right. Can be combined with the forward key for right-front movement. Release to resume straight movement.
  • Stop Button (some models): Press to immediately halt all drone actions and enter standby mode.

3.2 Function Keys (Some models are equipped)

  • Acceleration Key: Press to switch the drone to high-speed driving mode. Press again to return to normal speed.
  • Trick Key: Press to execute preset stunt actions (e.g., rotation, drift, overturning). The drone will automatically return to normal driving state after completing the stunt.
  • Lighting/Sound Effect Key: Press to toggle the drone's lighting and sound effects on or off, enhancing the play experience.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the drone and remote controller. Avoid using harsh chemicals or solvents.
  • Storage: Store the product in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote controller and drone if storing for extended periods.
  • Inspection: Regularly inspect the drone for any signs of damage, especially to the protection ring, propellers, and battery compartment.

5. Troubleshooting

Drone does not respond to remote control:
Ensure both the drone and remote control are powered on. Check if batteries in both devices are sufficiently charged and installed correctly. Re-attempt pairing as described in section 2.3.
Drone movement is sluggish or stops unexpectedly:
The battery in the drone may be low. Recharge or replace the batteries as per section 2.2. Ensure no obstructions are interfering with propeller movement.
Pairing fails repeatedly:
Turn off both the drone and remote control, then turn them back on and try pairing again. Verify that all batteries are fresh or fully charged. Ensure no other devices are causing signal interference.

6. Specifications

AttributeValue
Brand NameMN MODEL
Model NumberSpeedyBee Bee25
UseVehicles & Remote Control Toys
MaterialComposite Material
Is ElectricNo battery
Is it battery/power supplyN
Is it charger/adapterN
OriginMainland China
Recommend Age14+y
High-concerned chemicalnone
Is Batteries IncludedNo

Package Dimensions

  • Length: 20 cm
  • Width: 10 cm
  • Height: 10 cm
  • Weight: 0.1 kg

Note: Screws are not included in the package. Image indicating screws are not included in the package.Text description for non-visual users: An image with Chinese text stating that screws are not included in the package.

7. Assembly Diagrams and Components

The SpeedyBee Bee25 protection ring and associated components are available in various colors and configurations. Below are visual references for some key parts:

7.1 GPS Cover and Receiver Cover

The GPS cover and receiver cover are essential components for protecting the drone's electronics. These parts are typically provided as a set.

Diagram of transparent GPS cover and receiver cover for BEE25Text description for non-visual users: A diagram showing two transparent plastic components: a larger, flatter piece labeled 'receiver cover' and a smaller, dome-shaped piece labeled 'GPS cover'. These are part of a set for the BEE25 drone.

These covers are available in various colors, including transparent, blue, pink, green, and yellow, to match different drone aesthetics.

7.2 Protection Ring

The main protection ring is designed to shield the drone's propellers and frame from impacts. It is a single injection-molded piece.

Image showing multiple colored protection rings for SpeedyBee Bee25 droneText description for non-visual users: Five individual drone protection rings in yellow, blue, transparent, pink, and green colors, arranged against a white background.

The protection rings are available in colors such as transparent, green, yellow, blue, and pink.

8. User Tips

  • Many users find this product to be a "Nice kit" and appreciate that it "fits" well with their SpeedyBee Bee25 drones.
  • Ensure to double-check the compatibility of the protection ring with your specific drone model before installation.
  • For optimal performance and longevity, follow all battery installation and charging guidelines carefully.

9. Warranty and Support

For detailed warranty information and terms of service, please refer to the official product documentation. A user manual in PDF format is available for further reference:

View User Manual (PDF)

If you encounter any issues or require technical assistance, please contact the seller or manufacturer's customer support channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.