1. Introduction
Thank you for choosing the MN MODEL SG1010 1:10 Scale 4WD Off-Road Climbing RC Car. This realistic model is designed for enthusiasts seeking a professional-grade off-road experience with delicate control and robust performance. Please read this manual thoroughly before operating your RC car to ensure safe and optimal performance.

The SG1010 RC Car, available in different colors and body styles, shown with its remote control.
2. Safety Precautions
- WARNING: Not suitable for children under 36 months. Contains small parts which may pose a choking hazard.
- Always operate the RC car in open areas, away from people, pets, and obstacles.
- Do not operate near water unless specifically designed for amphibious use (this model is not).
- Ensure batteries are charged correctly and handled with care. Do not short-circuit or overcharge batteries.
- Turn off the RC car and remote control when not in use.
- Keep hands, hair, and loose clothing away from moving parts.
3. Package Contents
Please check the box for the following items:
- Remote Controller
- 1 * 7.4V 1300mAh Li-ion Battery
- USB Charger
- Operating Instructions (Manual)
- Screwdriver
- Sticker set
- RC Car (SG1010 or SG1009 model)

All items included in the SG1010 RC Car package.
4. Specifications

General product specifications.

Detailed climbing and control specifications.

Product and packaging dimensions.
| Feature | Description |
|---|---|
| Scale | 1:10 |
| Type | Car (Off-road, Climbing) |
| Material | Plastic, Metal, ABS |
| State of Assembly | Ready-to-Go |
| Remote Control | Yes, Full Proportional Synchronous Control System (Gun Control) |
| Frequency | 2.4GHz |
| Remote Distance | 100m |
| ESC/Receiver | Integrated 120A ESC/Receiver |
| Motor | 380 Motor, 22000 RPM |
| Servo | Steering 19G, 3-wire Gear Shift 9G |
| Differential Structure | Front and Rear Straight Axles (no differential speed between them) |
| Charger | USB 7.4V Balanced Charging |
| Product Battery | 7.4V 1300mAh Lithium Battery |
| Control Time | About 25 minutes |
| Remote Battery | 4 x 1.5V AA Battery (Not Included) |
| Charging Time | Approx. 3 Hours |
| Maximum Speed | High Speed: 15KM/H, Low Speed: 8KM/H |
| Power/Steering | Full Proportional Steering |
| Product Features | Simulated headlights, off-road function, high and low speed gear shifting, 19G steering servo for full-scale steering, agile control, 380 high-speed motor for linear throttle, fast and slow freely controllable, long remote distance up to 100 meters, Angel eye bright front lights, simulated turn signals, linked brake lights/reverse lights, doors and hood can be opened. |
| Protection Function | Vehicle high temperature protection, overcharge, discharge protection |
| Certification | CE |
5. Setup
5.1. Charging the Vehicle Battery
- Connect the USB charger to a suitable USB power source (e.g., computer USB port, USB wall adapter).
- Connect the 7.4V 1300mAh Li-ion battery to the USB charger.
- The charging indicator on the charger will show the charging status. Refer to the charger's specific instructions for light indications.
- Charging typically takes about 3 hours. Do not leave the battery unattended during charging.
5.2. Installing Remote Control Batteries
- Locate the battery compartment on the back of the remote control.
- Open the battery cover.
- Insert 4 x 1.5V AA batteries (not included), ensuring correct polarity.
- Close the battery cover securely.
5.3. Vehicle Battery Installation
- Open the vehicle's battery compartment (refer to the chassis structure diagram for location).
- Connect the fully charged 7.4V 1300mAh Li-ion battery to the vehicle's power connector.
- Securely place the battery within the compartment and close the cover.
5.4. Binding the Remote Control
The remote control and vehicle are usually pre-bound. If re-binding is necessary:
- Turn on the RC car.
- Turn on the remote control.
- The remote control and car should automatically connect. If not, refer to the specific binding procedure in the included operating instructions.

Remote control layout with battery position and various controls.
6. Operating Instructions
6.1. Basic Controls
- **Throttle Trigger (Forward/Backward)**: Pull the trigger to move forward, push to move backward.
- **Steering Wheel (Left/Right)**: Turn the steering wheel to control the vehicle's direction.
- **Fine Tune Left/Right**: Adjust the steering trim if the vehicle doesn't drive straight.
- **Speed Gear**: Use the speed gear switch on the remote to toggle between high (15KM/H) and low (8KM/H) speeds.
- **Light Button**: Press to control the vehicle's lights (headlights, brake lights, turn signals, hazard lights).

The RC car offers full proportional control for precise handling.
6.2. Driving Tips
- **Off-Road Performance**: The 4WD system and independent suspension allow the SG1010 to tackle various terrains including desert, mountain roads, rocky paths, and highways.
- **Chassis Height Adjustment**: The vehicle features chassis height adjustment to adapt to different ground conditions and enhance performance.
- **Gear Shifting**: Utilize the high and low speed gear shifting for optimal control on different surfaces and inclines.
- **Simulated Lights**: The simulated lights (headlights, brake lights, turn signals, hazard lights) add to the realistic driving experience. Note: The ceiling light is an upgraded part that needs to be purchased separately.

The SG1010 features high/low speed switching for versatile driving.

Independent suspension allows the RC car to conquer diverse terrains.
Watch the SG1010 RC Car in action, demonstrating its off-road capabilities.
7. Maintenance
7.1. Cleaning
- After each use, especially in dusty or muddy conditions, clean the vehicle with a soft brush or cloth.
- Avoid using water directly on electronic components. If necessary, use a damp cloth and ensure all parts are dry before storage or next use.
7.2. Battery Care
- Always disconnect the battery from the vehicle when not in use.
- Store batteries in a cool, dry place.
- Do not store fully charged or completely discharged batteries for extended periods. Charge to approximately 50% for long-term storage.
- Inspect batteries for any damage or swelling before and after use.
7.3. Component Checks
- Regularly check all screws and fasteners for tightness.
- Inspect tires for wear and tear.
- Ensure the steering and throttle mechanisms move freely and are not obstructed.
- Check the chassis and suspension components for any damage or bending.

Chassis structure and key components for maintenance reference.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not respond | Low battery in vehicle or remote; Not powered on; Not bound. | Charge vehicle battery; Replace remote batteries; Ensure both are powered on; Re-bind remote and vehicle. |
| Short control distance | Low remote battery; Interference. | Replace remote batteries; Move to an area with less interference. |
| Vehicle drives crooked | Steering trim needs adjustment. | Use the fine tune left/right knob on the remote control to adjust. |
| Lights not working | Light button not pressed; Wiring issue. | Press the light button on the remote; Check wiring connections. |
9. Warranty and Support
This product is covered by a manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the seller or manufacturer directly with your purchase details. Keep your proof of purchase for any warranty services.