Introduction
Thank you for purchasing the Huina 1501 1/18 Scale Scania 770S Licensed RC Truck. This model is designed for enthusiasts aged 14 and above, offering a realistic driving experience with full proportional control, simulated lights, sound effects, and independent suspension. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your RC truck to ensure optimal performance and enjoyment.


Package Contents
Please check the box for the following items:
- Huina 1501 Scania 770S RC Truck
- Remote Controller
- Operating Instructions (this manual)
- USB Cable (for charging the truck's battery)
- Truck Battery (Lithium battery)
Note: 4*AA batteries for the remote controller are NOT included and must be purchased separately.
Product Structure Overview
Familiarize yourself with the key components of your RC truck:


Setup
1. Install Remote Controller Batteries
- Locate the battery compartment on the back of the remote controller.
- Open the battery compartment cover.
- Insert 4 AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2. Charge the Truck Battery
The truck is powered by a Lithium battery. Before first use, fully charge the battery.
- Connect the USB charging cable to the truck's battery port.
- Connect the other end of the USB cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
- Allow the battery to charge until the indicator light (if present) shows a full charge.
- Disconnect the charging cable once charging is complete.
3. Power On
- Ensure the truck's battery is installed and connected.
- Turn on the power switch on the RC truck.
- Turn on the power switch on the remote controller.
- The truck and remote should automatically pair. If not, refer to the troubleshooting section.
Operating Instructions
The Huina 1501 features a 19-channel 2.4G remote control for full proportional control, offering a stable signal and an interference-free range of approximately 25 meters.

Remote Controller Functions:
- Left Vertical Push Rod (1): Pushing up moves the car forward. Pushing down moves the car backward. Putter down accelerates the car.
- Left Horizontal Push Rod (2): Pushing left turns the wheels left, and the front and rear turn signals flash. Pushing right turns the wheels right, and the front and rear turn signals flash.
- Top Left Button (3): Activates the support frame to rise, and the front and rear turn signals double flash.
- Top Right Button (4): Turns on the hook, and the front and rear turn signals double flash.
- Middle Left Knob (5): Console left fine-tuning function.
- Middle Left Button (6): Drops the rear frame, and the front and rear turn signals double flash.
- Bottom Left Button (7): Raises the tail plate, and the front and rear turn signals double flash.
- Bottom Right Button (8): Drops the tail plate, and the front and rear turn signals double flash.
- Middle Right Knob (9): Right fine adjustment function of the servo.
- Middle Right Button (10): Sound switch (toggles sound effects).
- Top Middle Button (11): Light button (cycles through light modes).
- Bottom Middle Button (12): Activates drag hook closure, and the front and rear turn signals double flash.
Driving and Maneuvering
- Full Proportional Control: The steering and speed can be adjusted delicately with the intensity of the control putter, providing a realistic control feel.
- Independent Shock Absorption: The independent front wheel shock absorption effectively reduces bumps, maintains stability, and prolongs vehicle service life.
- Rear Four-Wheel Drive: Provides powerful traction and strong guiding ability, allowing for segmented acceleration by operating the strength of the push rod.


Simulated Lights and Sound Effects
The truck features realistic lighting and sound effects with four distinct light modes:

- Auxiliary Small Light: Dynamic flashing on the front of the car.
- Steering Linkage: Left/right turn signals flash when steering.
- Reversing Linkage: Reverse flashing when moving backward.
- Static Always On - Mode One: All lights are static and on.
- Static Always On - Mode Two: A different static light configuration.
- Static Always On - Mode Three: Another static light configuration.
- Static Steady Light - Mode Four: A steady light pattern.
Maintenance
Cleaning
- After each use, especially in dusty or dirty environments, gently wipe down the truck with a soft, dry cloth.
- Avoid using water or harsh chemicals, as this can damage electronic components.
- Use a small brush or compressed air to remove dirt from crevices and moving parts.
Battery Care
- Always fully charge the truck's Lithium battery before storage if it will not be used for an extended period.
- Do not overcharge or over-discharge the battery.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Remove batteries from the remote controller if not in use for a long time to prevent leakage.
General Inspection
- Regularly check all screws and connections to ensure they are tight.
- Inspect tires for wear and tear.
- Ensure all moving parts (wheels, suspension, steering linkages) operate smoothly and are free from obstructions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Truck does not respond to remote control | Low batteries in truck or remote; Not paired; Out of range; Interference. | Charge truck battery. Replace remote controller batteries. Turn both devices off and on again to re-pair. Operate within 25m range. Move to an area with less electronic interference. |
| Lights or sound not working | Feature turned off; Low battery. | Press the Light button (11) or Sound button (10) on the remote. Charge truck battery. |
| Truck moves slowly or inconsistently | Low truck battery; Obstruction in drivetrain. | Fully charge the truck battery. Check wheels and gears for debris or obstructions. |
| Steering is off-center | Steering trim needs adjustment. | Use the Console left fine-tuning knob (5) or Right fine adjustment function of the servo knob (9) on the remote to adjust the steering trim until the wheels are straight. |
Specifications

| Feature | Detail |
|---|---|
| Product Name | 19 Channel Scania 770S RC Truck |
| Model Number | 1501 (SJY-1501) |
| Scale | 1:18 |
| Dimensions (L x W x H) | 392 x 166 x 244 mm |
| Material | Plastic, Metal, Rubber, Electronic Components |
| Power Source | Electric (Lithium battery for truck) |
| Remote Control Channels | 19 Channels |
| Remote Control Signal | 2.4G High Frequency |
| Remote Control Distance | Approximately 25 meters |
| Controller Battery | 4*AA (not included) |
| Body Lighting | 4 lighting modes for front car, linkage tail light, linkage turn signal |
| Product Weight (naked) | Approx. 1608g (without battery) |
| State of Assembly | Ready-to-Go |
| Recommended Age | 14+ years |
User Tips
- Responsive Support: Should you encounter any issues or have questions, the seller is known for being attentive and responsive. Do not hesitate to reach out for assistance.
- Outdoor Play: The 25-meter range and robust build make this truck suitable for outdoor play. Ensure you have enough space to fully enjoy its proportional control.
- Battery Management: Always ensure both the truck's battery and the remote controller's batteries are adequately charged before use to avoid interruptions during play.
Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact your seller directly. They are equipped to provide assistance and guidance regarding your Huina 1501 RC Truck.
Disclaimer: Not suitable for children under 36 months due to small parts.