LYZRC manufactures affordable consumer drones and quadcopters, featuring folding designs, GPS positioning, 4K cameras, and intelligent flight modes for hobbyists.
LYZRC is a manufacturer specializing in consumer recreational drones and aerial photography solutions. The brand is well-known for its wide range of affordable, feature-rich quadcopters, such as the popular L900 Pro, L600 PRO MAX, and L700 series. LYZRC drones typically feature compact, foldable designs for portability and are equipped with advanced flight technologies including GPS satellite positioning, optical flow hovering, and brushless motors for efficient performance.
Targeting entry-level to mid-range hobbyists, LYZRC integrates user-friendly features like one-key return, waypoint flight, and intelligent obstacle avoidance into their products. While primarily focused on remote-controlled aircraft, the brand occasionally produces other electronic lifestyle items. LYZRC products are widely distributed through major international online marketplaces, offering accessible options for users looking to explore 4K aerial videography without the high cost of professional equipment.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To unlock the motors, ensure the drone is paired with the remote. On most LYZRC models (like the L900), press the dedicated 'unlock' button on the controller. The propellers should start spinning at idle speed, indicating the drone is ready for takeoff.
GPS signals are often unavailable indoors. To take off without GPS, you may need to switch to 'Indoor Mode' or Optical Flow mode. On many LYZRC remotes, long-press the GPS button for about 3 seconds to turn off GPS; the controller may display 'GPS OFF' or similar, allowing the motors to unlock.
Place the drone on a flat, horizontal surface. Turn on the drone and controller. Press and hold the 'Gyroscope Calibration' button on the remote for about 3 seconds. The drone's lights will usually flash rapidly and then turn solid (or beep) to indicate successful calibration.
Drifting often indicates that the gyroscope or geomagnetic (compass) sensors need calibration. Land the drone on a level surface and perform the gyroscope calibration. If the issue persists, perform the geomagnetic calibration (often involving rotating the drone horizontally and vertically) as described in your specific model's manual.