LYZRC E99 MAX

Contents

LYZRC E99 MAX Drone User Manual

Model: E99 MAX

1. Introduction

The LYZRC E99 MAX Drone is a versatile and easy-to-control quadcopter designed for recreational use. Featuring an 8K HD camera, optical flow positioning, and a foldable design, it offers a stable and enjoyable flight experience for both beginners and enthusiasts. This manual provides essential information for safe operation, setup, and maintenance of your drone.

Product demonstration video showcasing key features and flight capabilities.

2. Safety Warnings and Guidelines

2.1 General Safety

WARNING: CHOKING HAZARD - small parts. Not for children under 3 years.

The Z10 drone (E99 MAX) is a precision device integrating mechanical, electronic, aerodynamic, and high-frequency transmission technologies. Proper assembly and debugging are crucial to avoid accidents. The product holder must operate the drone safely; improper operation may lead to serious personal injury or property loss. We are not responsible for any issues arising from assembly, use, or operation.

  • This product is suitable for individuals aged 14 and above with model operation experience.
  • Always fly in legally designated flight areas.
  • We are not responsible for any safety liabilities arising from operation, use, or control once the product is sold.

2.2 Flight Environment

  • Avoid flying near crowds, tall buildings, high-voltage lines, airports, highways, train stations, subway stations, and densely populated urban areas.
  • Do not fly in extreme weather conditions such as strong winds, rain, thunderstorms, or at night.
  • Keep the drone away from moisture and water to prevent electronic component malfunction.
  • Fly within visible range.

2.3 Operation Precautions

  • Operate the remote control aircraft according to your physical and mental state and flight skills. Operating while fatigued or improperly can increase the risk of accidents.
  • Keep hands, face, and objects away from high-speed rotating propellers to avoid danger and damage.

2.4 Battery Safety (Lithium Polymer Battery)

Lithium Polymer (LiPo) batteries are lightweight but delicate. Improper operation can cause fire or explosion.

  • Do not charge the battery on the ground to prevent fire.
  • If storing the product for a week or more, maintain the battery at 50% charge to prolong its life.
  • Use only the original professional charger provided.
  • For storage longer than three months, recharge the battery to maintain voltage and lifespan.

3. Package Contents

Please check the package contents upon receipt:

  • E99 MAX Drone (Black or White, depending on selection)
  • Remote Control (with or without screen, depending on selection)
  • Lithium Battery x1 (or more, depending on package)
  • Spare Blades x4
  • Protective Frame x4
  • USB Charging Cable x1
  • Screwdriver x1
  • Storage Bag x1
  • App Instruction Manual x1
  • Instruction Manual x1 (this document)
Package contents for 4K single camera black drone version, including drone, remote, battery, spare blades, protective frames, USB cable, screwdriver, storage bag, and manuals.

Image showing the contents of the 4K single camera black drone package.

Parts list for the screen remote version, including drone, remote with screen, spare blades, storage bag, instructions, screwdriver, battery, protective frames, USB cable.

Image showing the parts list for the screen remote version.

4. Specifications

FeatureSpecification
Brand NameLYZRC
ModelE99 MAX (Z10 Drone)
CategoryCamera Drone
UA LevelCO level toy drone
Drone Weight120g (Takeoff weight: 68g)
Max Takeoff Weight<1kg
Motor TypeBrushless Motor
Obstacle Avoidance TypesVisual Avoidance
Max Wind Speed Resistance< 10 KM/H
Flight TimeApprox. 8-10 minutes (12min stated in properties)
Remote DistanceApprox. 1000m (with screen remote control)
Aircraf Operating Frequency2.4 GHz
ConnectivityAPP Controller, Remote Control
Camera IntegrationCamera Included
Camera Mount TypeFixed Camera Mount (Electrically adjustable dual camera)
Camera Features8K HD Video Recording, Dual-lens switching, 50x zoom, Gesture photography, Beauty filter, MV production
Video Maximum Resolution8K (7680*4320)
Sensor Size1/1.28 Inches
GPSYes
Display ControlYes (Remote with screen)
Integrated Propeller GuardInclude
Folded Size13x7x5.5cm
Unfolded Size25x25x5.5cm (including propellers)
Body Battery3.7V large capacity lithium battery
Remote Control BatteryBuilt-in rechargeable lithium battery
Parameter Details table for E99 MAX drone, showing size, color, flight performance, lens, batteries, control mode, endurance, and remote control distance.

Detailed parameter specifications for the E99 MAX drone.

Diagram showing the folded and unfolded dimensions of the E99 MAX drone and its carrying case.

Drone and case dimensions.

5. Setup Guide

5.1 Aircraft Assembly

  1. Unfolding the Drone: When unfolding, first unfold the back arms, then the front arms. When folding, fold the front arms first, then the back arms.
  2. Propeller Installation: Ensure propellers are installed correctly. Match 'A' propellers to 'A' positions and 'B' propellers to 'B' positions on the drone's motors.
  3. Battery Installation: Insert the fully charged drone battery into the battery compartment. Ensure it is securely connected.

5.2 Remote Control Setup

  1. Charging the Remote Control: Connect the USB charging cable to the remote control's charging port and the other end to a USB power source (e.g., computer USB port). The red indicator light will turn on during charging and turn off when fully charged.
  2. Mobile Phone Holder (if applicable): Pull out the bracket at the bottom of the remote control to securely clamp your mobile phone.

6. Operating Instructions

6.1 Pairing the Drone and Remote Control

  1. Turn on the drone's power switch and place it on a flat surface. The drone's indicator lights will flash.
  2. Turn on the remote control's power switch. The remote control will emit a "tick" sound.
  3. The drone's indicator lights will become solid, indicating successful pairing. You are now ready for takeoff.

6.2 Basic Flight Controls

Remote Control Guide showing buttons for take photos/record videos, speed switching, throttle lever, roll, direction bar, headless mode, calibration/emergency stop, take off/land, return, confirm/play, scroll up/down.

Diagram of the remote control layout and functions.

  • One-Click Takeoff/Landing: Press the dedicated one-click takeoff button to launch the drone. Press the one-click landing button to land. Note: Due to atmospheric pressure changes, slight altitude variations during flight or low battery are normal.
  • Throttle (Left Joystick): Push up to ascend, pull down to descend.
  • Forward/Backward (Right Joystick): Push up to fly forward, pull down to fly backward.
  • Left/Right Side Flight (Right Joystick): Push left to fly left, push right to fly right.
  • Turning (Left Joystick): Push left to turn left, push right to turn right.

6.3 Advanced Features

  • Headless Mode: Press the headless mode button. The drone's lights will flash. In this mode, the drone's orientation is relative to the remote control, simplifying flight. To set the direction, position the drone with its camera facing forward (your front) and the remote control directly behind it before takeoff. To exit, press the headless mode button again.
  • Speed Selection: The drone has three speed gears (low, medium, high). The default is low speed. Press the speed switch button on the remote control to cycle through speeds. One beep for low, two beeps for medium, three beeps for high. (Recommended for beginners to use low speed).
  • 3D Rolling: Fly the drone to an altitude of 2-3 meters. Press the 3D roll button on the right side of the remote control (it will beep). Then, push the right joystick in the desired direction to perform a 360-degree roll.
  • Optical Flow Positioning: This feature helps maintain stable hovering both indoors and outdoors.
  • Obstacle Avoidance: Short press the obstacle avoidance button (as shown in the manual). The drone's eye lights will flash slowly, indicating the mode is active. Press and hold the button again to turn it off.
  • Gesture Photography/Recording: Aim at the camera and make specific gestures to trigger photo capture or video recording.
  • Waypoint Trajectory Flight: Draw a flight path on your mobile phone screen, and the drone will follow the trajectory.
  • Gravity G-Safe Operate: Control the drone's flight by swinging your mobile phone, eliminating the need for button presses.
Drone in flight, highlighting easy control features like one-click takeoff/landing, multi-speed, and headless mode.

Easy control for beginners with one-click functions and headless mode.

Drone hovering, illustrating optical flow positioning for stable flight.

Optical flow hovering for stable indoor and outdoor flight.

Remote control with an integrated 4.3-inch screen, allowing direct image transmission without a mobile phone.

Remote control with integrated screen for direct image viewing.

Image demonstrating gesture photography, where specific hand gestures trigger photo or video capture.

Gesture photography feature.

Image showing a drone following a drawn trajectory on a mobile phone screen.

Waypoint trajectory flight.

Drone in flight, illustrating the flight control system with automatic obstacle avoidance.

Flight control system with obstacle avoidance.

7. Maintenance

7.1 Battery Care

  • Always use the original charging cable and a suitable USB power source for charging.
  • Do not overcharge or over-discharge the batteries.
  • Store batteries in a cool, dry place away from direct sunlight and heat.
  • If the drone is not used for an extended period (e.g., over a week), ensure the battery is charged to approximately 50% to maintain its lifespan. Recharge every three months during long-term storage.

7.2 Cleaning and Storage

  • Clean the drone and remote control with a soft, dry cloth. Avoid using solvents or harsh chemicals.
  • Ensure the drone is dry before storing.
  • Store the drone and its accessories in the provided storage bag or case to protect them from dust and damage.

8. Troubleshooting

ProblemPossible ReasonSolution
Remote control and drone not connectedNot paired; low battery in remote or droneRe-pair the drone and remote control; ensure both have sufficient battery charge.
Drone cannot take offMain rotor deformed; low drone batteryReplace any deformed main rotors; charge or replace the drone battery.
Drone drifts during flightNot horizontally calibratedPerform horizontal calibration: Place the aircraft on a level surface, move the direction control joysticks on the remote control outward in an "X" pattern or press the reset button. The remote will beep, drone lights flash for ~3 seconds, then become solid, indicating calibration is complete.
Camera not working / Poor video qualityCamera malfunction; low resolution setting; signal interferenceCheck camera connection; ensure proper settings in the app; fly in an area with less interference. Note: Some users report lower than advertised video resolution.
Drone is uncontrollable / Cannot keep positionEnvironmental factors (wind); calibration issues; faulty sensorsFly in calm conditions; perform horizontal calibration; ensure optical flow sensors are clean and unobstructed.

9. User Tips

  • Verify Features: Upon receiving your drone, carefully check that all advertised features, such as GPS and the screen remote control, are present and functioning as expected. Some users have noted discrepancies between product descriptions and received items.
  • Consider Extra Batteries: The flight time is approximately 8-12 minutes. For extended enjoyment, purchasing additional batteries is highly recommended.
  • Practice in Open Areas: While the drone has optical flow positioning and obstacle avoidance, practicing in wide, open spaces free from obstacles is best, especially for beginners.
  • Camera Expectations: While advertised as 8K, some users report the actual video quality to be lower (e.g., 480p). Manage expectations regarding camera performance.
  • Gentle Landings: The drone's build quality has been described as basic. Aim for gentle landings to prevent damage.
  • Firmware/App Updates: Regularly check for updates to the drone's companion app for improved performance and bug fixes.

10. Warranty and Support

For any issues, technical support, or warranty claims, please contact the seller or authorized distributor. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.