LYZRC SG901 PRO MAX

Contents

SG901 PRO MAX Drone User Manual

Model: SG901 PRO MAX | Brand: LYZRC

1. Safety Information and Warnings

⚠️ WARNING: CHOKING HAZARD - small parts. Not for children under 3 years.

⚠️ Disclaimer: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

1.1 Important Statements

  • This product is not suitable for use by people under the age of 14.
  • This product is a precision equipment that integrates professional knowledge in mechanics, electronics, aerodynamics, high-frequency emission, etc. It requires correct assembly and debugging to avoid accidents.
  • The product holder must use a safe way to operate and control; improper operation may cause serious personal injury or property damage.
  • This product is suitable for people who have experience in operating model aircraft and are no less than 14 years old. For individuals under the age of 14, it is important to use this product safely with the accompaniment of an adult.
  • In case of problems with use, operation, maintenance, etc., please contact your local distributor or relevant personnel of our company.
  • The packaging and instructions contain important information and should be retained.
  • It is your responsibility to ensure that this aircraft does not cause harm to the personal and property of others.
  • Our company and the seller shall not be responsible for any loss, damage, or bodily injury caused by improper use or operation.
  • Children should be guided by adults when operating aircraft. This product is prohibited for children under the age of 14 to operate.
  • Please follow the instructions or packaging instructions for proper installation and use. Some parts should be assembled by adults.
  • The product contains small parts, please place them out of reach of children to prevent the risk of accidental ingestion or suffocation.
  • It is strictly prohibited to play on the road or in areas with accumulated water to avoid accidents.
  • Please pack the packaging materials in a timely manner to avoid harm to children.
  • Do not disassemble or modify the aircraft, as disassembly or modification may cause the aircraft to malfunction.
  • The charger battery box battery needs to be inserted into a designated power source that matches the product logo.
  • The remote control uses a 3.7V built-in lithium battery, which does not require replacement.
  • Regularly check if the charging line components are damaged, and stop using them if any damage is found until they are completely repaired before use.
  • When charging the rechargeable battery, it must be supervised by an adult. When charging, it must be kept away from high temperatures and flammable materials. Do not leave the aircraft model outside the monitoring range.
  • Please do not short-circuit or squeeze the battery to avoid explosion.
  • Do not mix different types of lithium batteries.
  • The aircraft uses a 7.4V intelligent lithium battery. Take it out of the plane and charge it.
  • Do not short-circuit, disassemble, or throw the battery into fire; Do not place the battery in a hot or heated area (such as in a fire or near an electric heating device).
  • Battery Safety Instructions: Exhausted batteries must be removed from the model.
  • The power terminal should not be short-circuited.
  • During flight, please stay away from other electrical equipment and use in environments with magnetism and magnetic fields, as it may interfere with the magnetic sensors in the aircraft.
  • Please maintain a safe distance from the high-speed rotating propeller to avoid the risk of twisting or cutting.
  • The motor is a heating component, please do not touch it when it has just stopped working to avoid burns.
  • Light emitting diode laser radiation, keep your eyes away from the beam.
  • Do not use the model close to the ear! Misuse may cause hearing damage.
  • Charging line: 5V = 1-2A.
  • To ensure the magnetic environment requirements of aviation radio stations, during the period when relevant national departments issue radio control orders and within the region, the use of model remote controls should be stopped as required.

1.2 Safe Flight Guidelines

  • Image Transmission Site Requirements: The remote control antenna should be deployed, and in an open area with no obstacles around. Do not return against the wind.
  • Avoid Obstacles: Avoid flying over or near people, trees, high-voltage power lines, buildings, airports or water areas, as well as high-strength power lines or base stations, as they may affect the compass carried on the aircraft.
  • Weather Conditions: Do not use this product under adverse weather conditions such as rain, snow, fog, and wind speeds exceeding 7m/s or 16mph.
  • Rotating Parts: Stay away from rotating propellers and motors.
  • General Safety: Understanding safety guidelines is crucial for safe flight. Before flying, please read the safety instructions carefully.

2. Product Overview

The SG901 PRO MAX is a folding aerial photography drone designed for entertainment and leisure activities. It features an 8K HD camera, GPS positioning, and various intelligent flight modes.

2.1 Aircraft Components

SG901 MAX Drone with remote control
The SG901 MAX Drone and its remote control, highlighting the integrated screen.
  1. Camera
  2. Propeller
  3. Motor
  4. LED lights
  5. Intelligent lithium battery
  6. Obstacle Avoidance Device

2.2 Package Contents

SG901 MAX Drone package contents
Included accessories: drone, remote control, battery, propellers, charging cable, storage bag, and manual.
  • SG901 MAX Drone
  • Remote Control with Screen
  • Intelligent Lithium Battery (1 total)
  • Propellers (Blade A x4, Blade B x4)
  • USB Charging Cable x1
  • Screwdriver x1
  • Screws x8
  • User Manual (this document)
  • Storage Bag

3. Setup

3.1 Propeller Installation

Propeller installation diagram
Ensure propellers are installed in the correct orientation (A/B distinction).

Please ensure that all propellers are installed in the correct orientation as shown in the figure. If installed incorrectly, the aircraft will not be able to fly normally. Fan blades are distinguished by A/B markings.

3.2 Battery Installation/Removal

Battery installation and removal diagram
Insert the battery into the compartment (arrow 3) and press the clip (arrow 1) to remove (arrow 2).
  • Installation: Insert the battery into the aircraft battery compartment in the direction shown (arrow 3). After installation, please check to ensure that the battery is installed in place.
  • Removal: Press the battery clip (arrow 1) and then remove the battery in the direction of (arrow 2).

3.3 Charging the Aircraft Battery and Remote Control

Aircraft battery charging diagram
Connect the USB charging cable to the aircraft battery charging port. Red light indicates charging, blue light indicates full charge.
Remote control charging diagram
Connect the USB charging cable to the remote control charging port. Red light indicates charging, light off indicates full charge.
  • Aircraft Battery: Remove the USB charging cable and connect it to the battery charging port. When charging, the red light of the battery will turn on, and when fully charged, the blue light will turn on.
  • Remote Control: Remove the USB charging cable and connect it to the remote control charging port (note: not the data port). When charging, the red light on the remote control will turn on and the fully charged light will turn off.
  • Charging Adapter: It is recommended to use a 5V 1-2A adapter for charging to improve charging speed.

3.4 Preparation Before Takeoff

  1. Both the remote control and drone battery must be fully charged before takeoff.
  2. The drone arms and blades need to be fully extended.
  3. First turn on the drone switch and then turn on the remote control switch for frequency comparison.

3.5 Aircraft Code Matching

Aircraft code matching operation guide
Press and hold the aircraft power button for 3 seconds to turn it on, then place it horizontally. The remote control will beep when powered on and code checked.
  1. Press and hold the aircraft power button for 3 seconds to turn it on, and then place it horizontally on the ground. At this time, the front and rear LED lights of the aircraft flash for self-inspection.
  2. At the same time, when the remote control power is turned on and the code is checked, the remote control will emit a beep. At this time, the front LED light of the aircraft will become permanently on, and the rear LED light will flash, indicating successful code checking.

3.6 Gyroscope Calibration

Gyroscope calibration diagram
After successful frequency alignment, place the aircraft on a flat ground and briefly press the gyroscope calibration button.

After successful frequency alignment of the aircraft, place it on a flat ground, briefly press the gyroscope calibration button, make a remote click, and the front and rear lights will flash faster, indicating successful calibration. At this point, the GPS signal can be searched, and once the light is on for a long time, the aircraft can be controlled to unlock and take off.

3.7 Geomagnetic Correction

Geomagnetic correction diagram
Perform horizontal and vertical rotations for geomagnetic correction.
  1. When flying outdoors in GPS mode, the first flight must undergo geomagnetic correction. After the aircraft successfully aligns with the frequency, press and hold the geomagnetic correction button for 2 seconds, and the remote control will beep. At this time, the aircraft's LED light will quickly flash to start geomagnetic correction.
  2. Lift the aircraft 1 meter above the ground, level with the ground, and rotate it three times in a clockwise direction. At this point, the remote control emits a short beep, the rear LED light remains on, and the front LED light flashes. The horizontal geomagnetic correction is completed.
  3. Stand the aircraft upright, perpendicular to the ground, and rotate it three times in a clockwise direction. At this point, the remote control emits a long beep, and the front LED light remains on, while the rear LED light flashes, indicating successful vertical geomagnetic correction. At this point, the search GPS signal light remains on to unlock takeoff.
GPS search successful indicator
The LED light stops flashing and becomes permanently on, or the remote control beeps, indicating successful GPS signal search.

After adjusting the frequency, the LED light enters a fast flashing state. When the LED light stops flashing and becomes permanently on, or when the remote control emits a beep, it indicates that the GPS signal has been searched for and can be unlocked for takeoff.

  • Please ensure that the takeoff environment is open and that satellite signals greater than 10 stars are detected before takeoff.
  • The first search for stars takes approximately 1 to 1.5 minutes.

3.9 Motor Unlocking

Motor unlocking joystick movement
Push both joysticks to the lower-left and lower-right corners simultaneously to unlock motors.

At this point, the throttle lever and direction lever are simultaneously pushed towards the lower left and right corners to complete unlocking. After the motor is started, flight can be completed.

⚠️ Before unlocking, fully unfold the blades.

3.10 Mode Switching

Attention: Indoor flight must switch to indoor mode. Outdoor flight must be switched to GPS mode.

  • Indoor Mode: After successful code matching, the aircraft defaults to GPS mode indoors. To take off indoors, first press the GPS switch on the remote control and switch to indoor mode to unlock takeoff.
  • GPS Mode (Outdoor): After the aircraft successfully matches the code, in an outdoor environment, the aircraft will automatically enter the search mode. When searching for stars, the aircraft should be placed in an open area, without tall buildings or wires or other obstructions around. When the number of satellites reaches about 10, the positioning will be completed. The remote control will beep a prompt to enter GPS mode, and the arm light will be on for a long time to unlock takeoff. (Outdoor flights must search for GPS location in open areas before takeoff, and a mobile phone connection is required).

4. Operating Instructions

4.1 Remote Control Functions

Remote control function diagram
Detailed diagram of the remote control with labeled buttons and functions.
  1. Mobile phone holder
  2. Indicator light
  3. Obstacle avoidance switch (the obstacle avoidance function is turned off by default when the drone is turned on)
  4. Headless mode
  5. Throttle control lever - up/down/left/right rotation
  6. Return key
  7. Photo button
  8. Video button
  9. Short press gyroscope calibration/long press horizontal calibration
  10. GPS switch
  11. Direction control lever - front/back/left/right
  12. Screen switch
  13. Function keys
  14. Confirm button
  15. Takeoff/Landing
  16. Power switch
  17. Return flight
  18. Speed regulation
  19. Lens adjustment
  20. Charging port
  21. SD card socket (only compatible with memory cards that support FAT format)
  22. Data socket (non-charging port)

4.2 One-Click Takeoff/Landing

One-click takeoff/landing button
The button for one-click takeoff and landing.
  • After unlocking the aircraft, press and hold the button for 2 seconds, and the aircraft will automatically take off to an altitude of about 1.5 meters and stop rising.
  • During flight, press and hold the button for 2 seconds, and the aircraft will automatically land on the ground.

4.3 Headless Mode

Headless mode button
The button to activate headless mode.

Press the headless mode button, and the remote control emits a "drdi" sound. When the aircraft is unlocked, the direction indicated by the nose is the front of the flight. During the flight, rotate the aircraft in the right direction, and the front of the flight is still the direction indicated by the nose when the aircraft is unlocked.

4.4 Return Flight

The aircraft has a return function. If the return point is successfully recorded before takeoff, the communication signal between the remote control and the aircraft will be lost or the return button will be pressed. The aircraft will automatically return to the return point and land to prevent accidents. There are three different ways for aircraft to return:

  • One-Click Return:
  • One-click return button
    The button to initiate one-click return.
  • When the GPS signal is good (the number of satellites is greater than 10), the aircraft can be launched to return by pressing the button in the figure below on the remote control. The return process is the same as that of a lost connection return, but the difference is that when the aircraft returns to land, the user can control the aircraft through the joystick to avoid obstacles. The return button can exit the return, and the user can control the drone flight again.
  • No Signal Return: The GPS signal is good (the number of GPS satellites is greater than 10), the compass is working normally, and the aircraft has successfully recorded the return point. If the remote control signal is interrupted, the drone will automatically return to the signal location and then connect to the remote control.
  • Low Power Return: After the low pressure of the aircraft, the indicator light will slowly flash, and the remote control will emit a continuous warning sound of "dripping". At this time, the aircraft will automatically return to the takeoff point 20 meters away. (After low power, the aircraft will return to the vicinity of the takeoff point, and the altitude and distance of the aircraft will be limited to within 20 meters.)

4.5 Photography/Video Recording

Enter the image transfer interface on the remote control, press the photo button to take a picture. Enter the image transmission interface on the remote control and press the recording button to record the video.

4.6 Camera Angle Control

Camera angle control scroll wheel
Use the scroll wheel on the remote control to adjust the camera's shooting angle.

By pressing the scroll wheel button on the remote control, the shooting angle of the pan tilt camera can be adjusted.

4.7 Advanced Flight Features (Requires Mobile App)

  • GPS Intelligent Tracking: After connecting the GPS of the aircraft, open the APP tracking function, and the aircraft will follow the movement of the phone.
  • Image Follow: Identify the subject being photographed at a distance of 1-5 meters from the aircraft and perform automatic follow-up flight.
  • Gesture Shooting Recognition: Within a distance of 1-5m from the aircraft, make a photo gesture/camera gesture facing the camera.
  • Multi-point Route Planning Flight: The aircraft flies autonomously according to the pre-set route, allowing players to focus on shooting.
  • Fixed Point Surround: Find the center point of the surround and then move the desired surround radius with the joystick.
  • Aircraft Retrieval Function: Click the GPS signal icon three times in a row to open the map interface, which displays the last distance and latitude and longitude position of the aircraft.
  • MV Functions: Includes filters, video effects, adding background music, and image/video sharing.
Demonstration video showcasing various flight features including remote control with screen, brushless motors, hand takeoff, high-definition camera, obstacle avoidance, and intelligent flight modes.

5. Maintenance and Upkeep

  • Use a clean soft cloth to clean this product.
  • Avoid exposing this product to sunlight or heat.
  • Do not immerse this product in water, as it may cause damage to electronic components.
  • Regularly check the plugs and other accessories. If any damage is found, please stop using them immediately until they are completely repaired.

6. Troubleshooting

  • Frequency Synchronization Failure: If the front and rear lights flash simultaneously, and the remote control indicator light is also flashing, it indicates that the frequency synchronization has not been successful or the drone battery is low. Restart the drone and re-synchronize the frequency.
  • Geomagnetic Correction Failure: If the geomagnetic correction fails, the takeoff cannot be unlocked and the geomagnetic correction must be re-performed.
  • Unstable Flight/Body Shaking: This can occur if the optical flow positioning and hovering effect of the lower lens is not good. This typically happens in environments such as:
    • On the water surface
    • Dim light conditions
    • Large height differences
    • Smooth reflective ground
    • Bicolor striped surfaces
    Environments affecting optical flow positioning
    Visual examples of environments where optical flow positioning may be unreliable.
  • GPS Return Not Possible: If the GPS signal is poor or GPS is not working, the drone cannot perform a return flight.
  • Photos/Videos Not Saving: Without a memory card inserted into the remote control, photos and videos cannot be saved or viewed directly.
  • Mobile Phone Image Transmission Issue: If you need to connect to a mobile phone for image transmission, first turn off the screen switch on the remote control, wait for about 50 seconds, and then connect your phone to the airplane camera WiFi.

7. Specifications

FeatureSpecification
Brand NameLYZRC
ModelSG901 PRO MAX
CategoryCamera Drone
UA LevelC0 level toy drone
Drone Weight120g
Max Takeoff Weight<1kg
Max Flight Speed4m/s
Max Flight Altitude50m
Flight Time20min
Remote Distance150m
Motor TypeBrushless Motor
Aircraf Operating Frequency2.4 GHz
Video Maximum Resolution4K (4096*2160)
Camera Features8K HD Video Recording
Camera IntegrationCamera Included
Camera Mount TypeFixed Camera Mount
Sensor Size1/1.28 Inches
GPSYes
Display ControlYes
ConnectivityAPP Controller
Obstacle Avoidance TypesNo support (Intelligent Obstacle Avoidance Module is a separate feature)
Integrated Propeller GuardInclude
Max Wind Speed Resistance< 10 KM/H
Equipped with Aerosol Spraying System/Spread Tank VolumeNo
Aerial PhotographyYes
Package Length31 cm
Package Width22 cm
Package Height10 cm
Package Weight0.881 kg

7.1 Drone Dimensions

Drone dimensions diagram
Dimensions of the SG901 MAX drone, both unfolded and folded.
  • Unfolded: Approximately 29cm (length) x 26cm (width) x 9cm (height)
  • Folded: Approximately 13cm (length) x 8.5cm (width) x 9cm (height)

8. User Tips

  • Optimal Takeoff: Ensure the takeoff environment is open and that satellite signals greater than 10 stars are detected before takeoff for best GPS performance.
  • Return Mode Caution: During automatic return, do not operate the joysticks. Allow the drone to return autonomously to prevent loss of control.
  • Battery Care: After flight, charge and store the battery. If not in use, charge the battery at least once every 3 months to prevent excessive discharge and permanent damage.
  • Memory Card: Use a memory card that supports FAT format for saving photos and videos.
  • Charging Adapter: For faster and more efficient charging, use a 5V 1-2A adapter.

9. Warranty and Support

For detailed instructions and further information, please refer to the comprehensive user manual PDF available for download. If you encounter any issues or require support, please contact your local distributor or the seller.

A PDF version of this manual is available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.