1. Introduction
This manual provides detailed instructions for the safe and enjoyable operation of your LYZRC AE20 Drone. Please read it carefully before use and keep it for future reference. The AE20 drone integrates advanced technologies in mechanics, electronics, aerodynamics, and high-frequency transmission, designed for entertainment and leisure activities. Proper assembly, calibration, and operation are crucial to avoid accidents and ensure optimal performance.
Product Highlights
- GPS positioning for stable flight and precise return.
- Brushless motor for powerful and efficient performance.
- Optical flow positioning for stable hovering.
- 180° Electrically adjustable ESC camera for versatile aerial photography.
- Lifting obstacle avoidance function to automatically avoid obstacles.
- One-click airdrop function for unique delivery capabilities.
- Remote control with voice prompt function and a large display screen.
- Headless mode and automatic switching between optical flow and GPS.
Product Video Overview
This video demonstrates the key features and flight capabilities of the LYZRC AE20 Drone, including GPS positioning, obstacle avoidance, one-click airdrop, and the voice-powered smart screen remote control.
2. Safety Guidelines
⚠️ WARNING: CHOKING HAZARD - small parts, Not for children under 3 years.
When operating the drone, always prioritize safety. Improper use may result in serious injury or property damage. The user is responsible for any losses caused by improper operation.
2.1 Flight Environment
- Only fly in open outdoor areas.
- Comply with local aviation authority regulations.
- Avoid flying over crowds, near airports, train stations, subway stations, or densely populated urban areas.
- Maintain a safe distance of at least 50 meters (164 feet) from people, animals, and vehicles.
- Stay away from high-voltage power lines and mobile phone signal towers as they may interfere with the drone's compass.

Figure 2.1: Illustration of flight environment restrictions, showing areas like crowds, buildings, and power lines to avoid.
2.2 Weather Conditions
- Do not use this product in adverse weather conditions such as rain, snow, or fog.
- Avoid flying in strong winds (wind speed exceeding 10 meters per second or 22 miles per hour) or thunderstorms.
- Do not fly when the battery is low or the GPS signal is weak.
- Fly within visible range at night.
2.3 Flight Altitude Restrictions
- The flight altitude shall not exceed 120 meters (400 feet) according to local aviation authority regulations.
- Exceeding this altitude may cause the drone to lose control and descend.
2.4 Warning for Rotating Components
- Stay away from rotating propellers and engines to avoid injury.
3. Accessories List
The following items are included in your LYZRC AE20 Drone package:
- Drone (AE20 Aircraft Max)
- Remote Control with Screen
- Wind Blade A (x2)
- Wind Blade B (x2)
- USB Charging Cable (x1)
- Instruction Manual (x1)
- Screwdriver (x1)
- Card Reader (x1)
- Memory Card (x1)
- Battery (x1)

Figure 3.1: Complete accessory list for the LYZRC AE20 Drone.
4. Setup Steps
4.1 Propeller Installation
Ensure all propellers are installed in the correct direction as shown in the diagram. Incorrect installation will prevent the aircraft from flying normally.

Figure 4.1: Propeller installation guide. Match A to A and B to B.
Important Notice:
- Carefully inspect the installation to ensure propellers are securely fixed.
- When the drone is powered on, avoid touching the propellers to prevent injury.
4.2 Remote Control Overview
Familiarize yourself with the remote control layout and functions:

Figure 4.2: Remote Control Guide with labeled buttons.
- **Phone holder (pull up):** Open to install a smartphone (if using APP control).
- **Power switch:** Turns the remote control on/off.
- **GPS switch:** Long press to activate/deactivate GPS mode.
- **One click takeoff/landing:** Press to automatically take off or land the drone.
- **Select Up/Take Photo:** Browse menu/settings, take photos.
- **Select/Video:** Browse menu/settings, record videos.
- **Airdrop:** Activates the throwing items function.
- **Indicator light:** Displays remote control status (charging, battery level).
- **Speed switching:** Adjusts drone speed.
- **Servo up/down:** Fine tunes the camera angle.
- **Obstacle avoidance switch:** Turns obstacle avoidance mode on/off (indoor mode only).
- **Calibration:** Initiates compass geomagnetic calibration.
4.3 Drone Components Overview
Key components of your AE20 Drone:

Figure 4.3: Drone components diagram.
- **Propeller:** Located on each arm. Ensure correct installation.
- **Lithium battery:** Provides power. Fully charge before use.
- **Brushless motor:** Drives the propellers. Handle with care.
- **LED:** Indicator lights display drone status.
- **High definition camera:** Captures images and videos. Keep clean.
- **Obstacle avoidance function:** Detects and avoids obstacles.
- **Airdrop hook:** For one-click airdrop functionality.
5. Operation Guide
5.1 Pre-Flight Checklist
- Ensure the battery is fully charged.
- Confirm propellers are installed correctly (A/B matching).
- Verify the compass and gyroscope have been calibrated.
- Check for GPS lock (at least 8 satellites).
- Ensure the flight area is clear of obstacles.
- Confirm weather conditions are good and visibility is high.

Figure 5.1: Pre-flight checklist for safe drone operation.
5.2 Charging Batteries
Always ensure batteries are fully charged before flight.
Aircraft Lithium Battery
- To remove the battery, press and hold the buckle, then pull it back.
- Connect the USB charging cable to the battery's charging port.
- Charging time is approximately 4 hours (depends on power source). The red light stays on during charging and turns off when fully charged.
Remote Control Battery
- Use a 5V/2A adapter (not included) to charge the remote control.
- Insert the charger into the charging port.
- Charging time is approximately 2.5 hours (depends on power source). Red light on when charging, green light on when fully charged.
Important Charging Precautions:
- Do not leave batteries uncharged for more than 5 days.
- Store batteries in a cool, dry place, away from high temperatures and direct sunlight.
- Always disconnect the battery from the aircraft before charging to prevent accidental startup.
- If the aircraft enters low-power alarm mode, stop use immediately and charge.
- Do not expose batteries to high temperatures, open flames, or electric heating devices.
- Do not immerse batteries in water.
- Do not completely discharge the battery. Store at 40-65% capacity when not in use.
- Do not leave batteries unattended while charging.

Figure 5.2: Battery charging instructions for drone and remote control.
5.3 Indoor Flight Operation
5.3.1 Drone and Remote Control Frequency Operation (Pairing)
- Install the battery onto the drone.
- Place the drone on a horizontal surface.
- Long press the power switch on the drone to turn it on.
- Long press the power switch on the remote control to turn it on.
- The drone's indicator light will flash rapidly. The remote control will emit a voice message "GPS mode", and its screen will display the drone image transmission.
- The drone's headlights will remain on, and the taillights will slowly flash, indicating successful pairing.
5.3.2 Turn off GPS (Indoor Mode)
GPS must be turned off for indoor flight. Press the GPS switch on the remote control. The remote control will emit a voice "indoor mode" sound, and the screen will display "indoor mode", indicating successful shutdown of GPS.

Figure 5.3: Indoor flight setup and GPS deactivation.
5.4 Outdoor Flight Operation
5.4.1 Drone and Remote Control Frequency Operation (Pairing)
Follow the same pairing steps as for indoor flight (Section 5.3.1).
5.4.2 Calibrate Compass (Horizontal and Vertical Directions)
- Press the geomagnetic calibration button once. The remote control will emit a voice message "compass calibration", and the drone's lights will flash rapidly.
- Pick up the drone and rotate it horizontally for 3 turns. The drone will make a "Di" sound.
- Then rotate it vertically for 3 turns. The remote control will emit "Compass calibration successful".
- When the drone's headlights remain stable and the taillights flash slowly, the geomagnetic calibration is complete.

Figure 5.4: Compass calibration procedure.
5.5 Gyroscope Calibration
The gyroscope must be calibrated on a horizontal plane.
- Place the drone on a horizontal surface.
- Briefly press the calibration button on the remote control.
- The remote control will emit a voice message "gyroscope calibration".
- The drone lights will flash rapidly, headlights remain on, and taillights will flash slowly, indicating complete gyroscope calibration.

Figure 5.5: Gyroscope calibration process.
5.6 Satellite Search (Outdoor GPS Mode)
For outdoor flight with GPS, the drone needs to acquire satellite signals.
- Place the aircraft on a level surface outdoors.
- The headlights will remain illuminated, and the taillights will flash slowly as GPS enters satellite search mode.
- The remote control will emit a "DI" sound.
- The remote control screen will display eight or more satellites, indicating successful GPS lock. This process may take 2-5 minutes depending on environment and signal strength.
5.7 Unlock and Takeoff
Reminder: When operating a drone, keep the nose facing forward and the tail facing the operator to avoid confusion in direction.

Figure 5.6: Drone orientation for operation.
Mode 1: Remote Control External Eight Unlock
- After the propellers begin to rotate, gently push the left throttle lever upwards to take off.
- The drone will hover at the current altitude.
Mode 2: One-Button Takeoff
- After the propellers start rotating, the remote control emits a voice message "takeoff".
- The drone will automatically ascend to about 1.5 meters.
- Press the one-click takeoff button again, and the remote control will emit a voice "land". The drone will automatically land.
5.8 Speed Regulation
- When the drone is turned on, the default flight speed is 50%.
- Press the speed switch button once: the voice will say "high gear" (100% flight speed).
- Press the speed switch button again: the voice will say "low gear" (50% flight speed).
5.9 Camera Lens Adjustment
Use the dedicated buttons on the remote control to adjust the camera lens angle:

Figure 5.7: Camera lens adjustment buttons are integrated into the remote control's joystick area.
5.10 Obstacle Avoidance Mode
- This mode is only effective in indoor environments.
- When turned on, the obstacle avoidance module automatically rises, and the drone operates in default obstacle avoidance mode. Flight speed gradually slows down and stops when a wall is recognized.
- To turn off, press the obstacle avoidance mode button. The remote control will say "obstacle avoidance off", and the module will lower.
- Note: Obstacle avoidance is automatically disabled in GPS mode.

Figure 5.8: Obstacle avoidance mode in action.
6. Maintenance
To ensure the lifespan and optimal performance of your drone, follow these maintenance tips:
6.1 Cleaning the Propellers
- Wipe the propellers with a soft cloth.
- Avoid using sharp tools to prevent damage.
6.2 Battery Storage
- Store batteries in a cool and dry place.
- Keep batteries away from high temperatures and direct sunlight.
- Do not squeeze or crush the battery.
7. Troubleshooting & User Tips
7.1 Common Issues and Solutions
- **Drone not flying normally after propeller installation:** Double-check that propellers A and B are installed on the correct arms and securely fastened with screws.
- **Obstacle avoidance not working:** Ensure you are in indoor mode. Obstacle avoidance is automatically disabled in GPS mode.
- **Drone not responding or losing control:** Ensure the battery is fully charged for both drone and remote control. Check for strong interference from high-voltage lines or magnetic objects. Verify GPS signal strength (at least 8 satellites for outdoor flight).
7.2 User Tips
- For optimal flight performance and battery life, always ensure both the drone and remote control batteries are fully charged before each use.
- The one-click airdrop feature can be utilized for creative applications, such as "drone fishing" or delivering small, lightweight items in appropriate environments.
- If you experience issues with obstacle detection, confirm that the obstacle avoidance mode is active and that you are operating in an indoor environment, as it is not available in GPS mode.
- Consider purchasing replacement blades and batteries to ensure uninterrupted enjoyment and extended use of your drone. Contact the seller for availability of spare parts.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | Aerial photography aircraft |
| Model | AE20 |
| Brand | LYZRC |
| Drone Weight | 200g |
| Flight Time | About 22 minutes |
| Remote Distance | About 1000 meters |
| Flight Altitude | About 120 meters |
| Video Maximum Resolution | 480i/P (720*480) |
| Camera Features | 720p HD Video Recording, 2-Axis Gimbal, Electrically adjustable camera |
| Obstacle Avoidance Types | Visual Avoidance, Lifting obstacle avoidance |
| Motor Type | Brushless Motor |
| Battery Capacity | 7.4V 1300mAh |
| Aircraft Operating Frequency | 2.4 GHz |
| Max Wind Speed Resistance | < 10 KM/H |
| Max Takeoff Weight | <1kg |
| Integrated Propeller Guard | Included |
| GPS | Yes |
| Display Control | Yes (Integrated screen on remote) |
| Connectivity | WiFi |
| Aerial Photography | Yes |
| Sensor Size | 1/1.28 Inches |
| Folded Size | 17.8 x 9.8 x 9.8 CM |
| Unfolded Size | 33 x 31 x 8.5 CM |

Figure 8.1: Detailed product parameters.

Figure 8.2: Drone product size in folded and unfolded states.
9. Legal Notice
9.1 Compliance with Aviation Regulations
- Operate the drone in accordance with all local requirements and laws.
- Always fly within line of sight and avoid restricted airspace (e.g., near airports or military zones).
- For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
9.2 User Responsibilities
- The user bears full responsibility for any damage or loss caused by improper operation or non-compliance with regulations.
- Failure to comply with regulations may result in fines, penalties, or other legal consequences.
9.3 Prohibition of Modification
- Do not disassemble, modify, or tamper with the drone. Unauthorized modifications may void the warranty and pose a safety hazard.
10. Warranty and Support
If you have any questions regarding the use, operation, maintenance, or other aspects of your LYZRC AE20 Drone, please contact your local dealer or our support team for assistance.
For additional information, you may refer to the User Manual (PDF).