LYZRC L200 PLUS

Contents

L200 PLUS GPS Drone User Manual

Model: L200 PLUS / L200 PLUS MAX

1. Introduction

Thank you for choosing the L200 PLUS GPS Drone. This manual provides essential information for the safe operation and maintenance of your drone. Please read it thoroughly before use.

The L200 PLUS is a high-performance drone featuring a 3-axis mechanical stabilization gimbal, GPS positioning, and advanced imaging capabilities. It is designed for both beginners and experienced pilots, offering stable flight and high-quality aerial photography.

Product Highlights:

  • 249g lightweight design (L200 PLUS)
  • 3-axis mechanical stabilization gimbal + electronic stabilization and anti-shake
  • Optional laser obstacle avoidance (360° omnidirectional)
  • 4K dual camera for aerial photography
  • 3KM digital image transmission
  • Brushless motor with optical flow hovering function
  • GPS intelligent tracking, image tracking, waypoint trajectory flight, intelligent surround flight
  • Photo, music, and video sharing capabilities

2. Safety Precautions

WARNING: This product is not a toy. Improper use can lead to damage or injury. Always follow these instructions carefully.

  • Do not disassemble the product yourself. The manufacturer is not responsible for any damage caused by unauthorized disassembly.
  • Fly in a safe area, away from people, crowds, and animals.
  • Avoid flying near high-voltage lines, trees, tall buildings, airports, and signal towers.
  • Do not fly in extreme weather conditions such as heat, cold, strong winds (wind strength not higher than level 4), heavy rain, or snow. A warm, sunny, and windless day is ideal.
  • Maintain a safe distance from the drone's rapidly rotating parts (propellers, gears, rotors) to avoid injury.
  • The battery and motor may become hot during and after use. Avoid touching them immediately after flight to prevent burns.
  • Do not look directly into the LED light beam to protect your eyes.
  • Ensure no other devices are using the same frequency to avoid interference.

Beginner Tips:

For beginners, it is recommended to practice flying at a low altitude in an open, uninhabited area for about three days to become familiar with the controls before attempting higher altitudes or more complex maneuvers.

3. Package Contents

Please check the contents of your package against the list below. If any part is missing, contact your dealer for replacement.

  • Drone (with battery) x 1
  • Remote Control x 1
  • USB Charging Cable x 1
  • Spare Propeller Blades (A x 4, B x 4) x 8
  • Screwdriver x 1
  • Storage Card / Card Reader x 1 (Optional)
  • User Manual x 1
  • WIFI Manual x 1
L200 PLUS drone and accessories

Image: L200 PLUS drone with remote control and various accessories.

Accessory picture showing drone, obstacle device, lens cap, remote control, mobile phone holder, fuselage battery, USB charging cable, fan blades, instruction manual, storage bag, color box.

Image: Detailed accessory picture including drone, obstacle device, lens cap, remote control, mobile phone holder, fuselage battery, USB charging cable, fan blades, instruction manual, storage bag, and color box.

4. Specifications

FeatureSpecification
Product NameL200 PLUS MAX / L200 PLUS
Model Numberae60
Channel4 Channels
Gyro6 Axis
Motor1503 Brushless Motor
Electric Adjustment Camera Angle110°
Camera Wide Angle120°
Camera Mount Type3-Axis Gimbal
Remote Control Frequency2.4GHz
Smartphone Receiving Method5G WIFI Channel
Remote Control DistanceAbout 3000 Meters (No Interference, No Occlusion)
WIFI Transmission Distance3000 Meters (No Interference, No Occlusion)
Drone Battery7.4V/3800mAh Lithium Battery
Flight TimeAbout 28-30 Minutes
Charging Time (Drone Battery)About 6 Hours (360 minutes)
Front Camera Photo Resolution4096*3072P
Front Camera Video Resolution2048*1080P
Bottom Camera Photo Resolution1280*720P
Bottom Camera Video Resolution1280*720P
Frame Rate25 fps
Photo Recording ModeRemote Control + APP Control
Remote Control Battery3.7V/400mAh Lithium Battery
Charging Time (Remote Control)About 40 Minutes
Quadcopter Size (Unfolded)35*35*10cm
Quadcopter Size (Folded)9*15.5*10cm
Quadcopter Weight249g
SD Card SupportYes, up to 32G
Battery IncludedYes
High-concerned chemicalNone
OriginMainland China
FPV800g airdrop
Product parameters table

Image: Product parameters table for L200 PLUS MAX drone.

Drone on a scale showing 249.0g weight

Image: Drone on a scale, highlighting its 249g weight.

Drone size display with dimensions

Image: Size display of the drone, showing unfolded dimensions of 35x35x9.3cm and folded dimensions of 9x15.5x9.3cm.

5. Setup Guide

5.1. Charging the Remote Control

  1. Connect the charging plug of the USB charging cable to the charging port on the remote control.
  2. Connect the USB plug to a computer or a mobile phone charger.
  3. The charging indicator light will illuminate during charging and turn off when fully charged.
  4. Charging time is approximately 40 minutes.

Note: If the charging indicator does not change during charging, the battery is fully charged and does not need further charging.

Remote control charging diagram

Image: Diagram illustrating how to charge the remote control using the USB cable.

5.2. Charging the Drone Lithium Battery

  1. To remove the drone battery, press the position indicated by the arrow in the diagram and pull the battery backward.
  2. Connect the USB-Android head of the charging cable to the drone battery.
  3. Connect the USB plug to a computer or a mobile phone charger for charging.
  4. The battery indicator will light up during charging and turn off when fully charged.
  5. Charging time is approximately 360 minutes (6 hours).

Note: If the battery is connected to the charger and the indicator light on the battery does not illuminate, it means the battery does not need to be charged.

Drone battery removal and charging diagram

Image: Diagram showing how to remove and charge the drone's battery.

5.3. Obstacle Avoidance Module Installation (L200 PLUS MAX only)

  1. Remove the cover plate from the obstacle avoidance module installation slot on the drone.
  2. Plug in the connector of the obstacle avoidance device as shown in the diagram.
  3. Install the obstacle avoidance device onto the drone.

Important: Ensure correct installation. Incorrect installation will prevent proper flight. Install the obstacle avoidance head before powering on the drone.

Obstacle avoidance module installation diagram

Image: Diagram illustrating the installation of the obstacle avoidance module.

6. Operating Instructions

6.1. Remote Control Overview

Remote control diagram with labeled functions

Image: Introduction and analysis of the remote control, showing labeled buttons and their functions.

The remote control features a liquid crystal display (LCD) screen that shows flight status, GPS information, battery levels, and more.

Key Functions:

  • Left Joystick: Controls altitude (up/down) and rotation (left/right).
  • Right Joystick: Controls forward/backward movement and left/right translation.
  • Power Switch: Turns the remote control on/off.
  • Speed Switch: Adjusts flight speed.
  • Obstacle Avoidance Switch: Activates/deactivates obstacle avoidance (if equipped).
  • Gyro Calibration Button: Initiates gyroscope calibration.
  • GPS Switch: Toggles GPS mode.
  • Photo/Video Buttons: Short press for photo, long press for video.
  • One-Click Return Button: Initiates automatic return to home.
  • Camera Angle Adjustment Knob: Adjusts the camera's vertical angle.

6.2. Flight Environment Requirements

Choose an open, spacious area for flight, free from obstacles, people, and animals. Avoid flying near heat sources, electrical lines, or electronic power supplies to prevent damage or accidents.

Remote control APP interface diagram

Image: Analysis of the APP interface, showing flight data and control options.

6.3. Indoor Mode Tutorial

6.3.1. Frequency Matching

  1. Insert the drone battery correctly and place the drone on a flat surface. Power on the drone.
  2. Power on the remote control.
  3. The lights on the drone and remote control will blink. After about 40 seconds, the remote control will emit two beeps, indicating successful pairing.

6.3.2. Gyroscope Calibration

  1. Place the drone in a horizontal position.
  2. Press the "Gyro Calibration" button on the remote control.
  3. The drone lights will blink rapidly and then turn solid. The remote control will emit a "Di" sound, indicating successful calibration.

6.3.3. Activating Indoor Mode

  1. Press and hold the GPS switch button for 3 seconds.
  2. The remote control will display "Di Di" twice, and the indoor mode indicator on the remote control will light up, confirming indoor mode is active.

6.4. Outdoor Mode Tutorial

6.4.1. Frequency Matching & Gyroscope Calibration

Follow the same steps as for indoor mode. The remote control will emit a "Di" sound for successful frequency matching and gyroscope calibration.

6.4.2. Geomagnetic Calibration

Geomagnetic fields can be affected by electronic devices, leading to abnormal flight data. Perform geomagnetic calibration during first-time use.

  1. After pressing the button on the remote control, it will emit a "Di" sound, and the drone's indicator light will blink rapidly.
  2. Hold the drone horizontally and rotate it slowly three times clockwise. The remote control will emit a "Di" sound, indicating successful horizontal calibration.
  3. Now, point the drone's nose downwards and rotate it slowly three times clockwise. The remote control will emit two "DiDi" sounds, indicating successful vertical calibration.
  1. After geomagnetic calibration, place the drone on a flat surface. It will automatically search for satellites.
  2. The drone's indicator light will change from slow blinking to solid, and the outdoor mode indicator on the remote control will also light up solid, indicating successful satellite acquisition.
  3. Once GPS is locked (typically 60-80 seconds with more than 10 satellites), you can press the unlock button on the remote control to fly.

Special Note: Ensure the outdoor environment is open and has more than 9 satellites before flying. Latitude and longitude differences between regions require calibration for accurate altitude measurement.

6.5. Basic Flight Steps

  1. Pair the remote control with the drone and initialize the drone.
  2. Perform geomagnetic calibration (not required again in the same location).
  3. Connect your phone to the drone's Wi-Fi and open the mobile app.
  4. Wait for the drone to acquire a GPS signal (60-80 seconds with more than 10 satellites) before unlocking for flight.

6.6. Control Methods

Video: Product demonstration showcasing flight features, controls, and camera capabilities.

6.6.1. Takeoff/Landing & Altitude Control

  • Left Joystick Up: Increases main rotor speed, drone ascends.
  • Left Joystick Down: Decreases main rotor speed, drone descends.

6.6.2. Directional Control

  • Left Joystick Left/Right: Rotates the drone left/right.
  • Right Joystick Up/Down: Moves the drone forward/backward.
  • Right Joystick Left/Right: Moves the drone left/right (sideways).

Warning: When the drone is within 30 cm of the ground, it becomes unstable due to propeller wash, known as "ground effect." The lower the drone's altitude, the greater the ground effect.

6.6.3. Unlocking the Drone

Once the drone has successfully acquired GPS satellites outdoors, it must be unlocked before takeoff. Short press the "Unlock" button on the remote control. All four propellers will start spinning at the same speed, indicating successful unlocking. The drone can now be operated normally.

6.6.4. Speed Settings

The default takeoff speed is slow. While the drone is airborne, you can adjust the speed using the speed knob. Turning the knob right once will cause the remote control to emit two "Di Di" sounds, indicating the second gear is engaged. Turning it left will engage the first (low) gear.

6.6.5. Camera Angle Adjustment

During flight, the camera angle can be adjusted using the camera adjustment knob on the remote control. Turning the knob left widens the camera angle, and turning it right narrows it.

6.6.6. Return to Waypoint (One-Click Return)

After GPS function is enabled and outdoor calibration is complete, or when the drone is far away or has low battery, press the One-Key Return button. The drone will return to its original takeoff position.

6.6.7. Return Flight Mechanisms

  • Communication Loss Return: If communication between the remote control and drone is lost, the drone will automatically return to the recorded return point and land to prevent accidents.
  • One-Click Return: If the GPS signal is strong (>9 satellites), press the One-Key Return button on the remote control. The drone will initiate return. You can still control the drone with the joysticks to avoid obstacles during the return and landing. Press the One-Key Return button again to cancel the return and regain control.
  • Low Battery Return: When the low battery indicator blinks slowly, the drone will automatically return to a point 30 meters from the takeoff point (height and distance limited to 30 meters). If the drone's voltage drops below a safe value, it will automatically land at the return point.

Precautions for Return Home:

  • The drone cannot avoid obstacles during automatic return.
  • If the GPS signal is poor or not functioning, the drone cannot return home.
  • If the drone does not receive satellite signals and the remote control signal is lost for more than 6 seconds, the drone cannot return home and will slowly descend until it lands and locks.

Reminder: In low-power return-home state, the remote control cannot cancel the return.

7. Maintenance

  • Regularly check propellers for damage or deformation. Replace any damaged propellers immediately.
  • Keep the drone and remote control clean and free from dust and debris.
  • Store the drone and batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ensure all connections are secure before each flight.

8. Troubleshooting

ProblemSolution
Drone indicator light blinks rapidly and continuously after power on.The drone is in gyroscope detection mode. Place the drone on a flat surface or the ground.
Drone does not hover after takeoff and tilts to one side.Place the drone on a flat surface or the ground and recalibrate the gyroscope.
Drone vibrates very strongly.The blades are deformed and must be replaced.
Drone cannot be unlocked, and the indicator light blinks rapidly.The drone battery voltage is too low. Please fully charge the battery.
Drone is unstable in strong wind.Wait for a wind gust of strength 4-5 to pass before flying again.
Cannot hover, constantly circles.Geomagnetic calibration was unsuccessful. Recalibrate the geomagnetic field.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official user manual PDF available for download. You can access the PDF via this link: L200 PLUS User Manual (PDF).

For further assistance, please contact the seller or manufacturer directly.

10. User Tips

  • Extra Batteries: Many users inquire about purchasing additional batteries for the L200 PLUS drone to extend flight time. Consider having spare batteries fully charged for longer sessions.
  • Obstacle Avoidance: The optional obstacle avoidance feature significantly enhances safety, especially for new pilots. Ensure it is correctly installed and activated when needed.
  • App Connectivity: Ensure your mobile phone is properly connected to the drone's Wi-Fi and the app is running correctly for optimal control and real-time image transmission.
  • GPS Lock: Always wait for a strong GPS signal lock (more than 10 satellites) before taking off in outdoor mode to ensure stable flight and reliable return-to-home functionality.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.