Manufacturer of DIY smart home security systems, wireless alarms, surveillance cameras, and environmental sensors.
KERUI specializes in accessible, user-friendly home security solutions designed for DIY installation. The brand offers a diverse range of products, including wireless alarm systems that integrate GSM and Wi-Fi connectivity to provide reliable alerts via mobile apps, SMS, or phone calls. Their ecosystem supports various peripherals such as PIR motion detectors, door and window sensors, water leak alarms, and smoke detectors.
In addition to alarm systems, KERUI manufactures smart surveillance options, including indoor PTZ cameras, outdoor solar-powered security cameras, and NVR systems. Many of their devices are compatible with popular smart home platforms like Tuya Smart and the V380 Pro app, enabling remote monitoring and management. Whether for residential properties, small businesses, or garages, KERUI provides scalable security architectures to enhance safety and peace of mind.
Latest manuals from manuals+ curated for this brand.
Have a manual for your KERUI alarm or camera? Upload it here to help others secure their homes.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Many KERUI alarm panels (like the W204 or W181) use the 'Tuya Smart' or 'Smart Life' app. To connect, ensure your phone is on a 2.4GHz Wi-Fi network, enable Bluetooth, and put the panel into pairing mode (usually via the settings menu), then follow the in-app instructions to add the device.
The required app depends on the specific camera model. Many use the 'V380 Pro' app, while others integrate with 'Tuya Smart'. Check the QR code in your user manual or on the device itself to identify the correct application.
To reset most KERUI cameras, locate the reset button (often near the SD card slot or on the bottom). Press and hold the button for several seconds while the device is powered on until you hear a voice prompt indicating the reset is complete.
Go to the 'Accessories' or 'Sensors' menu on your alarm panel or in the app. Select the option to add a device, then trigger the sensor you wish to pair (e.g., separate the magnet from a door sensor or wave in front of a motion detector). The panel should beep or display a message confirming the addition.