Yini i-Z-Wave?

I-Z-Wave iphrothokholi yamazwe omhlaba engenantambo yokuxhumana ku-Smart Home. Lokhu
idivayisi ifanele ukusetshenziswa endaweni okukhulunywe ngayo esigabeni se-Quickstart.

I-Z-Wave iqinisekisa ukuxhumana okuthembekile ngokuqinisekisa kabusha yonke imilayezo (indlela ezimbili
ukuxhumana) futhi yonke i-node enikwe amandla ama-main ingasebenza njengesiphindaphinda kwamanye ama-node
(inethiwekhi meshed) uma ngabe umamukeli engekho kububanzi obungenantambo obuqondile be
umthumeli.

Le divayisi nayo yonke enye idivayisi ye-Z-Wave eqinisekisiwe ingaba esetshenziswa kanye nezinye
idivayisi eqinisekisiwe ye-Z-Wave kungakhathaliseki ukuthi iluphi uhlobo nemvelaphi inqobo nje uma zombili zifaneleka
ububanzi obufanayo befrikhwensi.

Uma idivayisi isekela ukuxhumana okuvikelekile izoxhumana nezinye izisetshenziswa
ivikelekile inqobo nje uma le divayisi inikeza izinga elifanayo noma eliphakeme lokuphepha.
Uma kungenjalo izophenduka ngokuzenzakalela ibe yizinga eliphansi lokuphepha okufanele ligcinwe
ukuhambisana emuva.

Ukuze uthole ulwazi olwengeziwe mayelana nobuchwepheshe be-Z-Wave, amadivaysi, amaphepha amhlophe njll. sicela ubheke
ku-www.z-wave.info.

Incazelo Yomkhiqizo

I-STP328 iyisilawuli sodonga esisebenza ngebhethri esikwazi ukulawula i-actuator yebhayela ngoxhumano olungenantambo lwe-Z-Wave. Idivayisi ingasebenza kokubili njengesilawuli esiyinhloko noma njengesilawuli sesibili. Ukuziphatha kokulawula nokushintsha kodwa akukwazi ukusethwa ngaphandle kwentambo kodwa ngezinkinobho zokulawula zendawo kuphela. Idivayisi inezibali-zikhathi eziningi ngakho iyakwazi ukwenza izimo zokushisisa eziyinkimbinkimbi.

I-STP328 ihlinzekwa ngezingxenye ezimbili. I-actuator (SEC_SSR302) enezintambo eziqinile kubhayela we-combi noma wesistimu evamile kanye ne-thermostat engasetshenziswa kunoma iyiphi indawo evamile yasekhaya ngaphakathi kwebanga elivamile lamamitha angu-30 ngaphandle kwesidingo sanoma yiziphi izintambo ezibizayo noma eziphazamisayo.

Lungiselela Ukufakwa / Ukusetha Kabusha

Sicela ufunde imanuwali yomsebenzisi ngaphambi kokufaka umkhiqizo.

Ukuze ufake (engeza) idivayisi ye-Z-Wave kunethiwekhi yayo kufanele ibe yizimiso zasembonini
isimo. Sicela uqiniseke ukuthi usetha kabusha idivayisi ibe yizimiso zasembonini. Ungakwenza lokhu nge
ukwenza umsebenzi Wokukhipha njengoba kuchazwe ngezansi kumanuwali. Njalo i-Z-Wave
isilawuli siyakwazi ukwenza lo msebenzi kodwa kuyanconywa ukuthi sisebenzise owokuqala
isilawuli senethiwekhi yangaphambilini ukuze siqinisekise ukuthi yona kanye idivayisi ayifakiwe kahle
kusuka kule nethiwekhi.

Ukufakwa

I-Thermostat

I-backplate yedivayisi izosetshenziswa njenge-mounting plate yokukhweza odongeni. Vula i-backplate ngokuhlehlisa izikulufi ezitholakala ngaphansi bese uswayipha uvule iphaneli yokulawula. Sebenzisa i-backplate njengephethini futhi umaka izimbobo zokubhoboza, bhoboza izimbobo bese ukhweza i-backplate. Izikhala ku-backplate zizonxephezela nganoma yikuphi ukungahambi kahle kwezinto ezilungiswayo. Phinda uhlanganise iphaneli yokulawula nge-backplate bese uyishwiba uyivale endaweni evaliwe.

I-Actuator ye-boiler

Ukufakwa nokuxhuma umamukeli kufanele kwenziwe kuphela umuntu oqeqeshwe ngokufanele.

Ukuze ususe i-backplate kumamukeli, hlehlisa izikulufu ezimbili ezibambile ezitholakala ngaphansi; i-backplate kufanele manje isuswe kalula. Uma i-backplate isikhishiwe ephaketheni, qinisekisa ukuthi umamukeli uvalwe kabusha ukuze uvimbele umonakalo ovela othulini, udoti njll. I-backplate kufanele ifakwe amatheminali ezintambo phezulu futhi ibe sesimweni esivumela ukuvunyelwa okuphelele okungenani. 50mm ukuzungeza isamukeli.

I-Direct Wall Mounting

Umamukeli kufanele abekwe endaweni efanele eduze nendawo kagesi ekhona endaweni elula yokufaka izintambo ezintweni ezishintshwayo. Nikeza ipuleti odongeni endaweni lapho kuzokhwezwa khona umamukeli, ukhumbule ukuthi i-backplate ilingana kwesokunxele somamukeli. Maka izindawo zokulungisa ngokusebenzisa izikhala ku-backplate, bhora futhi uxhume udonga, bese uvikela ipuleti endaweni. Izikhala ku-backplate zizonxephezela nganoma yikuphi ukungahambi kahle kwezinto ezilungiswayo.

Ukufakwa Kwebhokisi Lezintambo

I-backplate eyamukelayo ingase ifakwe ngqo ebhokisini lensimbi elilodwa lensimbi yensimbi ehambisana ne-BS4662 kusetshenziswa izikulufu ezimbili ze-M3.5. Isamukeli sifaneleka ukukhwezwa endaweni eyisicaba kuphela. Akumele ibekwe endaweni eyinsimbi engambiwe.

Ukuxhunywa kukagesi

Konke ukuxhunywa kukagesi okudingekayo manje kufanele kwenziwe. Izintambo ezishaywayo zingangena zisuka ngemuva ngembobo engemuva. Izintambo ezingaphezulu zingangena kuphela ngaphansi komamukeli futhi kufanele zivikeleke ngokuvikelekileamped. Amatheminali okuphakelwa kwamapayipi amakhulu ahloselwe ukuxhunywa ekuhlinzekeni ngokusebenzisa izintambo ezingaguquki. Umamukeli unikwe amandla amapayipi futhi udinga i-3 amp i-fused spur. Osayizi bekhebula abanconywayo bangu-1.0mm2 noma 1.5mm2.

Umamukeli uboshelwe kabili futhi akadingi uxhumano lomhlaba nakuba ibhulokhi yokuxhuma yomhlaba inikezwe kupuleti elingemuva ukuze kunqanyulwe noma yiziphi izikhondatha zomhlaba zekhebula. Ukuqhubeka komhlaba kufanele kugcinwe futhi wonke ama-conductor omhlaba angenalutho kufanele afakwe imikhono. Qinisekisa ukuthi awekho ama-conductor ashiywa ephumele ngaphandle kwesikhala esimaphakathi esivalwe yi-backplate.

Umdwebo Wezintambo Zangaphakathi

I-SSR302 inokuxhumana okubalulekile okuyenza ifanele ama-mains voltage izicelo kuphela. Akukho ukuxhumana okwengeziwe okudingekayo phakathi kwamatheminali.

Ukufaka iReceiver

Uma izintambo ezingaphezulu zisetshenzisiwe, susa i-knockout/insert kusukela ku-thermostat engezansi ukuze uyifake. Faka umamukeli ku-backplate, qinisekisa ukuthi ama-lugs ku-backplate asebenzisana nezikhala kumamukeli. Swayipha iphansi lesamukeli endaweni ukuqinisekisa ukuthi amaphinikhodi okuxhumana angemuva kweyunithi angena ezikhaleni zetheminali ku-backplate.

Isexwayiso: UKUHLINZWA KWEZINKHIWO ZOKUHLUKANA NGAPHAMBI KOKUQALA UKUFAKA!

Ukufakwa/Ukukhishwa

Ngokuzenzakalela kwasembonini idivayisi akusiyona eyanoma iyiphi inethiwekhi ye-Z-Wave. Idivayisi idinga
uku ingezwe kunethiwekhi engenantambo ekhona ukuxhumana nezisetshenziswa zale nethiwekhi.
Le nqubo ibizwa ngokuthi Ukufakwa.

Amadivayisi angaphinda asuswe kunethiwekhi. Le nqubo ibizwa ngokuthi Ukukhishwa.
Zombili izinqubo ziqalwa isilawuli esiyinhloko senethiwekhi ye-Z-Wave. Lokhu
isilawuli siphendulelwa kumodi yokukhipha ngokulandelanayo. Ukufakwa kanye Nokungafakwa
bese kwenziwa ukwenza isenzo esikhethekile semanuwali khona kanye kudivayisi.

Ukufakwa

Ukuze Ufake kanye Nokukhishwa cindezela futhi ubambe zombili izinkinobho ezimhlophe kudivayisi kuze kube yilapho i-LED iqala ukukhanya. (okuluhlaza ->Ukufakwa, okubomvu -> Ukukhishwa)

Ukukhishwa

Ukuze Ufake kanye Nokukhishwa cindezela futhi ubambe zombili izinkinobho ezimhlophe kudivayisi kuze kube yilapho i-LED iqala ukukhanya. (okuluhlaza ->Ukufakwa, okubomvu -> Ukukhishwa)

Ukusetshenziswa komkhiqizo

I-Thermostat

Ingxenye 1 - Ukusebenza kwansuku zonke

I-Thermostat yakhelwe ukuba ibe i-thermostat elula, edinga ukungenelela okuncane komsebenzisi nge-heater ehlelwe ngaphambilinifile. Ukulungiswa okulula kwezinga lokushisa kungenziwa kalula ngokusebenzisa izinkinobho “+” kanye no-“-”. Izibani zezinkomba zisabela kunoma yikuphi ukulungiswa komsebenzisi kwesikhashana, nezinkomba ze-LED zisebenza ngale ndlela elandelayo; "Ukufudumala" kuboniswa izibani ezimbili ezibomvu futhi "Kupholile" kuboniswa ukukhanya okukodwa okuluhlaza okwesibhakabhaka. Inkinobho ephakathi ephawulwe ngokuthi “Kufudumele/Kupholile” ikuvumela ukuthi uguqule phakathi kwezilungiselelo ezifudumele nezipholile.

Imodi Ye-Power Down

Ngesikhathi sokusebenza okuvamile i-Thermostat izongena Kumodi Yamandla Phansi, lokhu okokukhulisa impilo yamabhethri angu-3 x AA afakelwe. Ukusebenza okuvamile kuzoqhubeka phakathi nale modi, futhi ukushisisa ngeke kuthinteke. Umphumela we-Power Down Mode uzosho ukuthi izinkomba ze-LED ngeke zikhonjiswe futhi i-LCD ngeke ikhanyise, nakuba izinga lokushisa elithi "Warm" noma "Cool" lizoboniswa. Ukuze "uvuse" i-AS2-RF cindezela inkinobho ethi "Kufudumele/Kupholile" imizuzwana emi-5, lokhu kuzobe sekukhanyisela kokubili izibonisi ze-LED ne-LCD isikhathi esithile. Noma yikuphi ukulungiswa kungenziwa, i-Power Down Mode izoqala futhi cishe imizuzwana engu-8 ngemva kokucindezela inkinobho yokugcina.

Ukulungiswa Kwezinga Lokushisa Elifudumele nelipholile

Izilungiselelo zethempelesha eziphokophelwe ezifudumele nezipholile ku-Thermostat ziyalungiseka ngokuphelele. Ukuze ushintshe izinga lokushisa eliqondiwe kubalulekile ukuthi uqale ngokucindezela inkinobho ephakathi nendawo ukuze uveze ukulungiselelwa kokuthi “Kufudumele” noma “Kupholile” (okuboniswa yizinkomba ze-LED ezibomvu noma eziluhlaza okwesibhakabhaka). Ngokusebenzisa okhiye abaphezulu/phansi ngaphansi kwebhaphu izinga lokushisa elifudumele/elipholile linganyuswa noma lehliswe libe sezingeni lokushisa olifunayo. SICELA UQAPHELE – akwenzeki ukusetha izilungiselelo ezifudumele zibe ngaphansi kwalezo ezipholile noma ngokuphambene nalokho. Uma izinga lokushisa elisha selisethiwe kuzilungiselelo ezifudumele noma ezipholile i-Thermostat izoqhubeka isebenzisa lesi silungiselelo kuze kube ukulungiswa okulandelayo okwenziwa ngesandla.

Ukuvikelwa kwesithwathwa

Inkinobho eluhlaza okwesibhakabhaka etholakala ngaphansi kwe-flap izoqalisa imodi yokuvikela isithwathwa, lapho ucindezelwa igama elithi "STANDBY" lizovela esibukweni, i-thermostat ihlelwe ngaphambili ngezinga lokushisa elivikela isithwathwa elingu-7C, lokhu kungalungiswa ngokusebenzisa phezulu kanye izinkinobho zomcibisholo waphansi. Ubuncane bokusetha ngu-5C. Akwenzeki ukusetha izinga lokushisa lokuvikela isithwathwa ngaphezu kwendawo epholile.

Ingxenye 2 - Imodi Yokuhlela

I-Thermostat yakhelwe ukungenelela okuncane komsebenzisi, kodwa uma kwenzeka noma yiziphi izinguquko ezinhlelweni ezikhona zidingeka sicela ucindezele inkinobho 6 kanye no-8 kanye kanye ukuze ufake imodi yokuhlela, lokhu kuzokuvumela ukuthi:

• Hlola isikhathi samanje/usuku/unyaka
• Hlola uchwepheshe wamanjefile
• Setha uchwepheshe omusha osethwe ngaphambilinifile or
• Setha uchwepheshe ochazwe ngumsebenzisifile

SICELA UQAPHELE: Ngemva kokuqeda noma yiziphi izinguquko ezingenhla, sicela uqinisekise ukuthi uphuma kumodi yokuhlela ngokucindezela izinkinobho 6 no-8 kanye kanye.

Ukuhlola Isikhathi Nosuku

I-Thermostat inokulungiswa kwewashi okuzenzakalelayo okwakhelwe ngaphakathi kwezinguquko zesikhathi se-BST ne-GMT futhi isethwe kusengaphambili ngesikhathi samanje nedethi phakathi nokukhiqizwa. Akukho ukuguqulwa okufanele kudingeke esikhathini nosuku, nokho uma kukhona ukuguqulwa okudingekayo sicela ubhekisele ezinyathelweni ezingezansi.

• Vula Ikhava
• Faka imodi yokuhlela ngokucindezela izinkinobho 6 no-8
• Cindezela u-TIME
• Cindezela okuthi SET
• MINUTE ukukhanya. Lungisa usebenzisa izinkinobho UP/DOWN. Cindezela okuthi SET
• IHORA liyakhanya. Lungisa usebenzisa izinkinobho UP/DOWN. Cindezela okuthi SET
• I-DATE iyakhanya. Lungisa usebenzisa izinkinobho UP/DOWN. Cindezela okuthi SET
• INYANGA iyakhanya. Lungisa usebenzisa izinkinobho UP/DOWN. Cindezela okuthi SET
• UNYAKA uyaphazima. Lungisa usebenzisa izinkinobho UP/DOWN. Cindezela okuthi SET
• Cindezela u-EXIT
• Phuma kumodi yokuhlela ngokucindezela izinkinobho 6 no-8

Ukusetha i-Heating Profiles

I-Thermostat iqukethe ukukhethwa kokusetha kusengaphambili okuhlanu kanye nomsebenzisi oyedwa onguchwepheshefile izinketho, enye yalezi izobe isethwe uMfaki. Ukunakekelwa kufanele kuthathwe ukuze kuqinisekiswe uchwepheshefile ikhethiwe evumelana nendlela yakho yokuphila engcono kakhulu. Uma engekho kochwepheshe osethiwefiles ukuhlangabezana nezidingo zakho kungenzeka ukusetha uchwepheshe ochazwe ngumsebenzisifile.

• Vula Ikhava
• Faka imodi ye-porgramming ngokucindezela izinkinobho 6 no-8
• Cindezela okuthi PROG
• Cindezela okuthi SET
• Khetha uchwepheshe odingekayofile ngokusebenzisa izinkinobho PHEZULU/PHANSI
• Cindezela okuthi SET. Ukuze kabushaview ukusetha ngaphambilinifiles 1 kuya ku-5 cindezela inkinobho ethi PHEZULU (7) ngokuphindaphindiwe
• Cindezela u-EXIT
• Phuma kumodi yokuhlela ngokucindezela izinkinobho 6 no-8

I-Heating Profiles

I-Thermostat ine-heater eyisithuphafiles, ezinhlanu zilungisiwe futhi eyodwa iyalungiseka. UProfile “ENYE” isethwe njengemisiwe futhi inemininingwane ngezansi. Ngesikhathi sokufaka i-heat profile kufanele ngabe isethwe ukuze ihambisane kangcono nezidingo zakho:

UProfiles eyodwa kuya kwezinhlanu zinezikhathi ezimisiwe, akukho ukuguqulwa ezikhathini ezifudumele / ezipholile ezingenziwa, uma kudingekile ukwenza noma yiziphi izinguqukofile ayisithupha kumele asetshenziswe. UProfile eziyisithupha zizokuvumela ukuthi umise uchwepheshefile ngokwezidingo zakho ngqo.

Okuchazwa Umsebenzisi - Uhlelo Lwezinsuku Eziyisi-7

UProfile 6 izokuvumela ukuthi usethe uchwepheshefile ngokwezidingo zakho ngqo. Ngokusebenzisa ishadi eligelezayo elingezansi ungalungisa izikhathi zesikhathi ezifudumele/ezipholile njengoba kudingeka. Uma kudingeka izikhathi ezifudumele noma ezipholile ezimbili kuphela nganoma iluphi usuku setha izikhathi ngokufanele futhi usethe izikhathi zokuqala ezisele ezishisayo nezipholile ukuze zifane ncamashí nesinye. Lokhu kuzokhansela izikhathi ze-2 noma ze-3 Zokufudumala/Zokuphola ngokuphelele zosuku oluthintekayo. Izikhathi ezingasetshenziswanga zizoboniswa uchungechunge lwamadeshi esikrinini sezilungiselelo. Cindezela okuthi SET bese ngakusasa bese kuvela i-SET esibukweni. Cindezela okuthi SET ukuze ulungise izilungiselelo zezinsuku ezilandelayo noma u-PHUMELA ukuze ubuyele kumenyu enkulu. Ukuze wenze lokhu, cindezela u-SET kuze kube usuku olulandelayo bese kuvela i-SET kusibonisi. Izikhathi ezingasetshenziswanga zizoboniswa uchungechunge lwamadeshi esikrinini sokusetha. Uma isikhathi esisodwa noma ezimbili zisethiwe futhi ufisa ukubuyela enkathini emithathu emahoreni angu-24 bese ucindezela umcibisholo oya phezulu lapho amadeshi evela ngemva kokusetha Kokugcina Okupholile kuzobuyisa izilungiselelo ezifihliwe Ezifudumele/Zokuphola.

• Vula Ikhava
• Faka imodi ye-porgramming ngokucindezela izinkinobho 6 no-8
• Cindezela okuthi PROG
• Cindezela okuthi SET
• Khetha PROFILE ESITHUPHA ngokusebenzisa izinkinobho PHEZULU/PHANSI bese ucindezela okuthi SET
• Lungisa isikhathi sokuqala se-WARM ngokusebenzisa izinkinobho PHEZULU/PHANSI futhi uqinisekise ngenkinobho ethi SET
• Lungisa isikhathi sokuqala esipholile ngokusebenzisa izinkinobho PHEZULU/PHANSI futhi uqinisekise ngenkinobho ethi SET
• Phinda izikhathi 2 no-3 (noma uma kungadingeki linganisa izikhathi ezifudumele nezipholile ukuze ukhansele bese ucindezela u-SET - bona ngenhla)
• I-SET ivezwa esibukweni 1. Ukuze uqhubeke nokuhlela usuku olulandelayo cindezela okuthi SETHA bese uye ku-“A” 2. Ukuze ukopishele izilungiselelo ezishintshiwe ngosuku olulandelayo cindezela inkinobho ethi DOWN bese uye ku-“C” 3. Ukuze uqedele ukuhlela hamba. ku "D"
• Cindezela okuthi COPY bese uphinda usuku ngalunye ukuze lukopishwe
• Uma usuqedile cindezela inkinobho DOWN bese uye ku-“B”
• Cindezela okuthi PHUMA kabili bese uphuma kumodi yokuhlela ngokucindezela izinkinobho 6 no-8

I-Actuator ye-boiler

Iyunithi isekela izindawo zokugcina ezimbili ezimile eziteshini ezimbili.

Ukucindezela inkinobho emhlophe Phezulu isekhondi elingu-1 kuzokhipha “umbiko wamandla okugcina” wesiteshi 1. Ukucindezela inkinobho Emhlophe Ephansi isekhondi elingu-1 kuzokhipha “umbiko wamandla okugcina” wesiteshi 2. Ngaphezu kwalokho amadivayisi angena kumodi yokufunda ka-1 okwesibili. Lokhu kuyasiza lapho uhlobanisa / uhlukanisa idivayisi neqembu lokulawula noma nje ukucacisa idivayisi namakilasi omyalo asekelwe. Lokhu kungenziwa noma nini kodwa ngeke kunikeze noma iyiphi inkomba ku-opharetha

Ukusakaza ngale ndlela kusetshenziswe ukuze kusekelwe ukuhlotshaniswa kwesiteshi nesilawuli senkampani yangaphandle esisekela Ikilasi Lomyalo Weziteshi Eziningi.

I-Node Information Frame

I-Node Information Frame (NIF) yikhadi lebhizinisi ledivayisi ye-Z-Wave. Iqukethe
ulwazi olumayelana nohlobo lwedivayisi namandla obuchwepheshe. Ukufakwa kanye
ukukhishwa kwedivayisi kuqinisekiswa ngokuthumela i-Node Information Frame.
Ngaphandle kwalokhu kungase kudingeke ekusebenzeni okuthile kwenethiwekhi ukuthumela i-Node
Ulwazi Frame. Ukuze ukhiphe i-NIF yenza lokhu okulandelayo:

Ukucindezela nokubamba izinkinobho ezimbili ezimhlophe isekhondi elingu-1 kuzoqalisa idivayisi ukuthi ikhiphe Uhlaka Lolwazi Lwe-Node.

Ukuxazulula inkinga ngokushesha

Nawa amasu ambalwa okufakwa kwenethiwekhi uma izinto zingasebenzi njengoba bekulindelekile.

1. Qiniseka ukuthi idivayisi isesimweni sokusetha kabusha kwasekuqaleni ngaphambi kokufaka. Ngokungabaza ungafaki ngaphambi kokufaka.
2. Uma ukufakwa kusahluleka, hlola ukuthi zombili izisetshenziswa zisebenzisa imvamisa efanayo.
3. Susa zonke izisetshenziswa ezifile ezihlotshaneni. Uma kungenjalo uzobona ukubambezeleka okukhulu.
4. Ungalokothi usebenzise amadivayisi ebhethri alele ngaphandle kwesilawuli esimaphakathi.
5. Ungawahloli amadivayisi we-FLIRS.
6. Qiniseka ukuthi unomshini osebenza ngogesi owanele ukuze uzuze ku-meshing

Ukuhlangana - idivayisi eyodwa ilawula enye idivayisi

Amadivayisi we-Z-Wave alawula amanye amadivaysi e-Z-Wave. Ubudlelwano phakathi kwedivayisi eyodwa
ukulawula enye idivayisi kubizwa ngokuthi ukuhlangana. Ukuze ulawule okuhlukile
idivayisi, idivayisi elawulayo idinga ukugcina uhlu lwamadivayisi azowamukela
imiyalo yokulawula. Lezi zinhlu zibizwa ngama-association groups futhi zihlala njalo
ezihlobene nezehlakalo ezithile (isb. inkinobho ecindezelweyo, izicupha zezinzwa, ...). Uma kwenzeka
umcimbi kwenzeka wonke amadivaysi agcinwe ku inhlangano efanele iqembu ngeke
thola umyalo ofanayo ongenazintambo, ngokuvamile i-'Basic Set' Command.

Amaqembu Enhlangano:

Inombolo YeqembuIncazelo Yezinombolo Zeqembu

1

5

Amadivayisi alawulwa imicimbi evuliwe/evaliwe

Idatha Yezobuchwepheshe

Ubukhulu	0.0900000×0.2420000×0.0340000 mm
Isisindo	470 gr
I-EAN	5015914212017
Uhlobo Lwedivayisi	Inzwa kanambambili yomzila
Isigaba Sedivayisi Ejwayelekile	Inzwa kanambambili
Ikilasi Ledivayisi Ethize	Inzwa kanambambili yomzila
I-Firmware Version	01.03
Inguqulo ye-Z-Wave	02.40
I-ID yesitifiketi	ZC07120001
I-Id yomkhiqizo we-Z-Wave	0086.0002.0004
Imvamisa	IYurophu - 868,4 Mhz
Amandla okudlulisela aphezulu	5 mw

Amakilasi Omyalo Asekelwe

• Okuyisisekelo
• Ibhethri
• Vuka
• Ukuhlangana
• Inguqulo
• Inzwa kanambambili
• I-alamu
• Ukucaciswa komkhiqizi

Amakilasi Omyalo Olawulwayo

• Okuyisisekelo
• I-alamu

Incazelo yemibandela ethile ye-Z-Wave

• Isilawuli — iyithuluzi le-Z-Wave elinamandla okuphatha inethiwekhi.
  Izilawuli ngokuvamile zingamasango, izilawuli ezikude noma izilawuli zodonga ezisebenza ngebhethri.
• Isigqila — iyidivayisi ye-Z-Wave engenawo amandla okuphatha inethiwekhi.
  Izigqila zingaba izinzwa, ama-actuator ngisho nezilawuli kude.
• Isilawuli Esiyinhloko — ungumhleli omaphakathi wenethiwekhi. Kufanele kube njalo
  isilawuli. Kungaba nesilawuli esisodwa kuphela kunethiwekhi ye-Z-Wave.
• Ukufakwa — inqubo yokwengeza amadivayisi amasha e-Z-Wave kunethiwekhi.
• Ukukhishwa — inqubo yokukhipha amadivayisi e-Z-Wave kunethiwekhi.
• Ukuhlangana — kuwubudlelwano bokulawula phakathi kwedivayisi elawulayo kanye
  idivayisi elawulwayo.
• Isaziso Sokuvuka — umlayezo okhethekile ongenazintambo okhishwe i-Z-Wave
  idivayisi yokumemezela ekwazi ukuxhumana.
• I-Node Information Frame — umlayezo okhethekile ongenazintambo okhishwe ngu-a
  Idivayisi ye-Z-Wave yokumemezela amakhono nemisebenzi yayo.