I-ACM4 Series UL Izilawuli Zamandla Zokufinyelela Ezingaphansi Ezisohlwini
Umhlahlandlela wokufaka
Amamodeli afaka phakathi:
I-ACM4: – Amane (4) Fuse Avikelwe Imiphumela
I-ACM4CB: – Okune (4) Kwemiphumela Evikelekile ye-PTC
Kuphelileview:
I-Altronix ACM4 ne-ACM4CB iguqula okukodwa (1) 12 kuya ku-24 volt AC noma okokufaka kwe-DC kube okokufaka okune (4) okulawulwa ngokuzimela okuhlanganisiwe noma okuvikelwe kwe-PTC. Lawa mandla aphumayo angaguqulelwa kufomu elomile loxhumana nabo "C" (ACM4 kuphela). Okukhiphayo kwenziwa kusebenze usinki wokuqoqa ovulekile noma okokufaka okuvamise ukuvuleka (NO) kwe-trigger okomile okuvuliwe kusukela ku-Access Control System, i-Card Reader, ikhiphedi, i-Push Button, i-PIR, njll. Amayunithi azohambisa amandla kumadivayisi ehadiwe okulawula ukufinyelela okuhlukahlukene okuhlanganisa i-Mag. Izingidi, Iziteleka zikagesi, Izibambi Zezicabha Zezibuthe, njll. Wonke amadivaysi axhumanisayo kufanele Afakwe ohlwini lwe-UL. Okukhiphayo kuzosebenza kuzo zombili izindlela ze-Fail-Safe kanye/noma Fail-Secure. Amayunithi aklanyelwe ukuthi anikezwe amandla umthombo owodwa owodwa wamandla ozonikeza amandla kukho kokubili ukusebenza kwebhodi nemishini yokukhiya, noma imithombo yamandla emibili (2) ezimele ngokuphelele, eyodwa (1) inikeza amandla okusebenza kwebhodi futhi enye okokukhiya/isisetshenziswa. amandla. Isixhumi esibonakalayo se-FACP sinika amandla i-Emergency Egress, i-Alarm Monitoring, noma ingase isetshenziselwe ukucupha ezinye izisetshenziswa ezisizayo. Isici sokunqamula i-alamu yomlilo singakhethwa ngasodwa kunoma yikuphi ukuphuma noma konke okune (4).
Ishadi lereferensi yokucushwa kwe-ACM4 kanye ne-ACM4CB:
| Inombolo Yemodeli ye-Altronix | Inombolo Yemiphumela | I-Fuse Evikelwe Okukhiphayo | Imiphumela Evikelekile ye-PTC | Izilinganiso Zokukhipha | I-Class 2 Ilinganiselwe Amandla Alinganiselwe-Auto- esettable | Uhlu lwe-ejensi |
| Izimo | 4 | 3A |  I-Sub-Assembly |
|||
| I-ACM4CB | 4 | 2.5A |
Uhlu lwe-UL kanye File Izinombolo:
UL File #BP6714.
UL 294* - I-UL ifakwe ohlwini lwamayunithi esistimu yokulawula ukufinyelela.
*ANSI/UL 294 7th Ed. Amazinga Okusebenza Okulawula Ukufinyelela:
Ukuhlasela Okubhubhisayo - I; Ukukhuthazela - IV; Ukuphepha Komugqa - I; I-Stand-by Power – I. “Izisetshenziswa Zesiginali” Zihlolwe ku-CSA Standard C22.2 No.205-M1983
Imininingwane:
- 12 kuya ku-24 volt AC noma ukusebenza kwe-DC (ukusetha akudingekile).
- Izilinganiso zokufaka: 12VDC @ 0.4A noma 24VDC @ 0.2A.
- Izinketho zokufaka ukunikezwa kwamandla:
a) Okokufaka kwamandla okukodwa (1) okujwayelekile (ibhodi namandla okukhiya).
b) Okokufaka kwamandla okuhlukanisiwe okubili (2) (okukodwa (1) kwamandla ebhodi kanye nokukodwa (1) kwamandla okukhiya/kwezingxenyekazi zekhompyutha). - Okune (4) Kokufakwayo Kwesistimu Yokulawula Ukufinyelela:
a) Okokufaka okune (4) okuvamise ukuvula (NO).
b) Izinto ezine (4) ezivulekile zokuqoqa usinki.
c) Noma iyiphi inhlanganisela yalokhu okungenhla. - Okuphumayo okune (4) okulawulwa ngokuzimela:
a) Okune (4) Okuphumayo kwamandla okuFail-Safe kanye/noma Yehlulekile-Vikela.
b) Okune (4) kwefomu elomile “C” 5A okukalwe nge-relay okuphumayo (ACM4 kuphela).
c) Noma iyiphi inhlanganisela yalokhu okungenhla (ACM4 kuphela). - Okune (4) okuphumayo kwamandla asizayo (akushintshiwe).
- Izilinganiso zokuphumayo:
- AmaFuse akalwe ngo-2.5A ngalinye.
- Ama-PTC akalwe ngo-2A ngalinye. - I-fuse eyinhloko ilinganiselwe ku-10A.
Qaphela: Kumamodeli ACM4/ACM4CB bhekisela ku-ACM4 ne-ACM4CB Configuration Reference Ishadi, Pg 2.
Qaphela: Izinga lokushisa elisebenzayo kufanele libe ngu-0 kuye ku-49ºC. - Ama-LED abomvu akhombisa ukuthi ukuphuma kubaliwe (ukudluliselwa kunikwe amandla).
- Ukunqanyulwa kwe-alamu yomlilo (i-latching noma ukungaxhunywanga) kuyakhetheka ngakunye kunoma iyiphi noma yonke imiphumela emine (4).
Izinketho zokufaka ze-Fire Alarm:
a) Ivamise ukuvula (CHA) noma kuvalwe ngokujwayelekile (NC) okokufaka okuthinta okomile.
b) Okokufaka kokuhlehlisa i-polarity kusuka kusekethi yokusayina ye-FACP. - I-FACP edluliselwe okukhiphayo (ifomu “C” loxhumana naye likalwe @ 1A/28VDC, alihlolwanga yi-UL).
- I-LED eluhlaza ikhombisa lapho ukunqanyulwa kwe-FACP kuqalisiwe.
- Amabhulokhi wetheminali akhiphekayo enza kube lula ukufakwa.
Ubukhulu bebhodi (L x W x H cishe okulinganiselwe): 5.175"x 3.36"x 1.25" (131.5mm x 85.6mm x 31.8mm).
Imiyalelo yokufaka:
Izindlela zokufaka izintambo zizohambisana ne-National Electrical Code/NFPA 70/ANSI, kanye nawo wonke amakhodi endawo neziphathimandla ezinegunya lokulawula. Umkhiqizo uhloselwe ukusetshenziswa endlini kuphela.
- Bheka Kumyalo Wokufakwa Kwe-Sub Assembly ukuze ukhweze uMfu. MS050913.
Ngokucophelela kabushaview: Umdwebo Wohlelo Ojwayelekile (ikhasi 4) Ukuxilongwa kwe-LED (ikhasi 5) Ithebula Lokuhlonza Kwetheminali (ikhasi 5) Imidwebo yokuhlanganisa (ikhasi 6) - Okokufaka kokunikezwa kwamandla:
Amayunithi anganikwa amandla nge-Listed Access Control Power Supply eyodwa ezonikeza amandla kukho kokubili ukusebenza kwebhodi kanye nemishini yokukhiya noma i-Listed Access Control Power Supplies amabili (1) ahlukene, eyodwa (2) ukunikeza amandla okusebenza kwebhodi. futhi enye ukunikeza amandla amadivayisi okukhiya kanye/noma ihadiwe yokulawula ukufinyelela.
Qaphela: Amandla okokufaka angaba ngu-12 kuya ku-24 volts AC noma ukusebenza kwe-DC.
Izilinganiso Okokufaka (ACM4/ACM4CB kuphela): 12VDC @ 0.4A noma 24VDC @ 0.2A.
a) Ukufakwa kwamandla okukodwa:
Uma iyunithi nemishini yokukhiya kuzonikwa amandla kusetshenziswa Ukufakwa Kwamandla Okukodwa Okufakwe Kusohlwini Lokufinyelela, xhuma okukhiphayo (12 kuya ku-24 volts AC noma DC) kumatheminali amakwe [- Amandla +].
b) Ukufakwa kwamandla okumbaxambili (Fig. 1, pg. 5):
Uma kufiswa ukusetshenziswa kwe-Listed Access Control Power Supplies, ama-jumper J1 kanye ne-J2 (abekwe kwesokunxele samatheminali amandla/ukulawula) kufanele asikwe. Xhuma amandla eyunithi kumatheminali aphawulwe [- Amandla +] bese uxhuma amandla emishini yokukhiya kumatheminali abhalwe [- Control +].
Qaphela: Uma usebenzisa i-DC Listed Access Control Power Supplies i-polarity kufanele ibhekwe.
Lapho usebenzisa i-AC Listed Access Control Power Supplies ukuhlukahluka akudingekile ukuba kubonwe.
Qaphela: Ukuze uhambisane ne-UL amandla kagesi kufanele afakwe ohlwini lwe-UL lwamasistimu okulawula ukufinyeleleka kanye nezinsiza. - Izinketho zokukhiphayo (Umdwebo 1, ikhasi 5):
I-ACM4 izohlinzeka ngokuphuma kwamandla ashintshiwe okune (4), okuphumayo okune (4) kwefomu elomile elithi “C”, noma iyiphi inhlanganisela yakho kokubili amandla ashintshiwe kanye nokuphumayo kwefomu elithi “C”, kanye nokuphuma kwamandla asizayo okune (4) okungashintshiwe. I-ACM4CB izohlinzeka ngokuphuma kwamandla okushintshiwe okune (4) noma okuphumayo okune (4) okungashintshiwe kwamandla asizayo.
a) Ukushintsha ukuphuma kwamandla:
Xhuma okokufaka okuyinegethivu (–) kocingo olunikwa amandla kutheminali ephawulwe ngokuthi [COM]. Ngomsebenzi Wokuhluleka Kokuphepha xhuma okokufaka okuphozithivu (+) kocingo olunikwa amandla kutheminali ephawulwe ngokuthi [NC]. Ngomsebenzi Wokuhluleka Kokuvikela xhuma okokufaka okuphozithivu (+) kwedivayisi enikwa amandla kutheminali ephawulwe ngokuthi [NO].
b) Imiphumela yefomu “C” (ACM4):
Uma okuphumayo kwefomu “C” kufunwa i-fuse ehambisanayo ephumayo (1-4) kufanele isuswe. Xhuma i-negative (–) yokunikezwa kwamandla ngqo kudivayisi yokukhiya. Xhuma iphozithivu (+) yomthombo wamandla kutheminali ephawulwe ngokuthi [C]. Ngomsebenzi Wokuhluleka Kokuphepha xhuma iphozithivu (+) yocingo olunikwa amandla kutheminali ephawulwe ngokuthi [NC]. Ngomsebenzi Wokuhluleka Kokuvikela xhuma iphozithivu (+) yocingo olunikwa amandla kutheminali ephawulwe ngokuthi [CHA].
c) Okuphumayo Kwamandla Ayisizayo (akushintshiwe):
Xhuma okokufaka okuphozithivu (+) kocingo olunikwa amandla kutheminali ephawulwe ngokuthi [C] kanye negethivu (–) yocingo enikwa amandla kutheminali ephawulwe ngokuthi [COM]. Okukhiphayo kungasetshenziswa ukunikeza amandla okufunda amakhadi, amakhiphedi njll.
Qaphela: Uma ufaka izintambo kokuphumayo okukhawulelwe kwamandla sebenzisa i-knockout ehlukile kunaleyo esetshenziselwa izintambo ezingenawo amandla alinganiselwe. - Izinketho zokucupha okokufaka (Umdwebo 1, ikhasi 5):
a) Ngokuvamile Vula i-trigger yokokufaka engu-[NO]:
Okokufaka 1-4 kwenziwa kusebenze okokufaka okuvamise ukuvuleka noma okuvuliwe komqoqi wokuqoqa.
Xhuma amadivayisi (izifundi zamakhadi, izinkinobho, isicelo sokuphuma ezinkinobho njll.) kumatheminali amakwe okuthi [IN] kanye no-[GND].
b) Vula okokufaka kweSinki Yokuqoqa:
Xhuma iphaneli yokulawula ukufinyelela okuphumayo komqoqi ovulekile kutheminali ephawulwe ngokuthi [IN] kanye novamile (negethivu) kutheminali ephawulwe ngokuthi [GND]. - Izinketho ze-Fire Alarm Interface (Amakhiwane 3 kuye ku-7, amakhasi 6 - 7):
I-[NC] evamise ukuvaleka, okokufaka okuvamise ukuvula okuthi [NO] noma okokufaka okubuyisela emuva i-polarity kusuka kumjikelezo wokusayinda we-FACP kuzocupha okuphumayo okukhethiwe. Ukuze unike amandla i-FACP Nqamula kokuphumayo vala iswishi ehambisanayo [SW1- SW4]. Ukuze ukhubaze ukunqamula kwe-FACP kokuphumayo vula iswishi ehambisanayo [SW1-SW4].
a) Ngokuvamile Vula okokufaka okuthi [NO]:
Ukuze uthole i-hook-up engaxhunywanga bheka i-Fig. 4, p. 6. Ukuze uthole i-hook-up yokuxhuma bheka i-Fig. 5, p. 7.
b) Okokufaka okuvamise ukuvalwa [NC]:
Ukuze uthole i-hook-up engaxhunywanga bheka i-Fig. 6, p. 7. Ukuze uthole i-hook-up yokuxhuma bheka i-Fig. 7, p. 7.
c) I-FACP Signaling Circuit input trigger:
Xhuma iphozithivu (+) nenegethivu (–) kusukela okukhiphayo kwesekethe ye-FACP kumatheminali amakwe [+ INP –]. Xhuma i-FACP EOL kumatheminali amakwe [+ RET –] (i-polarity ibhekisela esimweni se-alamu). I-Jumper J3 kufanele inqunywe (Umdwebo 3, ikhasi 6). - FACP Dry form "C" okukhiphayo (Umdwebo 1a, ikhasi 5):
Xhuma idivayisi oyithandayo ukuze icushwe okokukhiphayo kokuxhumana okomile kweyunithi kumatheminali amakwe okuthi [NO] kanye no-[C] FACP kokuphumayo okuvamise ukuvuleka noma amatheminali amakwe okuthi [NC] kanye [C] FACP kokukhiphayo ngokuvamile kuvalwe. - Ukufakwa kwe-tamper switch (Ayifakiwe):
I-Mount UL Ifakwe ohlwini lwe-tamper switch (i-Altronix Model TS112 noma okulinganayo) phezulu kwendawo ebiyelwe. Shelelezisa i-tampshintsha ubakaki uye onqenqemeni lwendawo ebiyelwe cishe u-2” ukusuka kwesokudla.
Xhuma tampshintsha izintambo uye kokokufaka Kwephaneli Yokulawula Ukufinyelela Okusohlwini noma idivayisi efanele yokubika esohlwini lwe-UL ukuze uvule isignali ye-alamu lapho umnyango wendawo ebiyelwe uvuliwe.
Ukunakekela:
Iyunithi kufanele ihlolwe okungenani kanye ngonyaka ukuze isebenze kahle. Voltagi-e ekuphumeni ngakunye kufanele ihlolwe kuzo zombili izimo ze-trigger ne-non-trigger futhi ukusebenza kwesixhumi esibonakalayo se-FACP kufanele kulingiswe.
Ukuxilongwa kwe-LED:
| I-LED | ON | VALIWE |
| I-LED 1 – LED 4 (Bomvu) | Ukudluliselwa komphumela kunikwe amandla. | Ukudluliselwa komphumela kukhishwe amandla. |
| I-TRG (Green) | Okokufaka kwe-FACP kucushiwe (isimo se-alamu). | I-FACP evamile (isimo esingesona i-alamu). |
Ithebula Lokuhlonza Kwetheminali:
| Isendlalelo seTheminali | Umsebenzi/Incazelo |
| - Amandla + | 12VDC kuya ku-24VDC okokufaka okuvela ku-UL Listed Access Control Power Supply. |
| - Ukulawula + | Lawa matheminali angaxhunywa kokuhlukile, kwe-UL Listed Access Control Power Supply ukuze kuhlinzekwe ngamandla okusebenza angawodwa e-ACM4/ACM4CB (ama-jumpers J1 kanye ne-J2 kufanele asuswe). |
| I-TRIGGER INPUT 1 – INPUT 4 IN, GND | Ukusuka kokujwayelekile okuvulayo kanye/noma okuvulayo okuvulayo okucuphayo okuqoqile okucuphayo (isicelo sokuphuma kwezinkinobho, ukuphuma kuma-PIR, njll.). |
| – OKUPHUMAYO 1 UKUPHUMA 4 NC, C, CHA, COM | I-12 kuya ku-24 volts AC/DC ibangela ukuphuma okulawulwayo: I-Fail-Safe [NC positive (+) & COM Negative (—)], I-Fail-Secure [AKUKHO okuhle (+) kanye ne-COM Negative (—)], Okukhiphayo okusizayo [C positive (+) & COM Negative (—A (Lapho usebenzisa i-AC power supply polarity akudingekile ukuthi ibhekwe), i-NC, C, NO iba ifomu elithi “C” 5A 24VACNDC ilinganisele imiphumela eyomile lapho kukhishwa amafuse (ACM4). Oxhumana nabo baboniswe esimweni esingacushiwe. |
| I-FACP INTERFACE T, + INPUT — | I-Fire Alarm Interface icupha okokufaka okuvela ku-FACP. Okokufaka kwe-trigger ngokuvamile kuvame ukuvuleka, kuvame ukuvaleka kumjikelezo wokuphumayo we-FACP (Fig. 3 ukuya ku-7, pg. 6-7). |
| I-FACP INTERFACE NC, C, NO | Othintana naye wefomu elithi “C” ukalwe @ 1A/28VDC ngokubika nge-alamu. (Lokhu okukhiphayo akuzange kuhlolwe yi-UL). |
Umdwebo Wohlelo Olujwayelekile:
Imidwebo yokuhlanganisa:
Umdwebo 2
Ukuxhuma ongakukhetha kusetshenziswa okokufaka okubili (2) okuhlukene kokuphakelwa kwamandla:
Umdwebo 3
Okokufaka kokuguqulwa kwe-polarity okuvela kumjikelezo wokusayinda we-FACP (i-polarity ibalulwe esimweni se-alamu): (Lokhu okukhiphayo akuzange kuhlolwe yi-UL)
Umdwebo 4
Ivamise Ukuvula - Non-Latching FACP trigger input:
Umdwebo 5
Ngokuvamile Vula i-FACP Latching icuphe okokufaka ngokusetha kabusha: (Lokhu okukhiphayo akuzange kuhlolwe yi-UL)
Umdwebo 6
Ivamise Ukuvalwa - Non-Latching FACP trigger input:
Umdwebo 7
Kuvamise Ukuvala - Ukuxhuma i-FACP icuphe okokufaka ngokusetha kabusha (Lokhu okukhiphayo akuzange kuhlolwe yi-UL):
Amanothi:
I-Altronix ayinasibopho sanoma yimaphi amaphutha e-typographical.
140 58th Street, Brooklyn, New York 11220 USA
Ucingo: 718-567-8181
Ifeksi: 718-567-9056
Webindawo: www.altronix.com
I-imeyili: info@altronix.com
Iwaranti yempilo yonke
IIACM4/ACM4CB
F22U
Amadokhumenti / Izinsiza
 |
I-Altronix ACM4 Series UL Uhlu lwe-Sub-Assembly Access Power Controllers [pdf] Umhlahlandlela wokufaka I-ACM4 Series UL I-Sub-Assembly Access Power Controllers Esohlwini, i-ACM4 Series, Izilawuli Zamandla Zokufinyelela Ezihlanganyelwe ze-UL ezifakwe kuhlu, Izilawuli zamandla okufinyelela eMhlangano, Izilawuli zamandla |
