ACM4 Series UL E thathamisitsoeng Sub-Assembly Access Power Controllers
Tataiso ea ho Kena
Mefuta e kenyeletsa:
ACM4: – Liphello tse Sirelelitsoeng tsa Fuse tse nne (4).
ACM4CB: – Tse nne (4) tsa PTC tse Sireleditsweng
Fetileview:
Altronix ACM4 le ACM4CB li fetola tlhahiso e le 'ngoe (1) 12 ho 24 volt AC kapa DC hore e be tse 'nè (4) tse laoloang ka boithaopo tse fused kapa PTC e sirelelitsoeng. Liphello tsena tsa matla li ka fetoloa hore e be mabitso a "C" a omileng (ACM4 feela). Lintho tse hlahisoang li sebelisoa ke sink e bulehileng ea pokello kapa ka tloaelo e bulehileng (NO) e kenya letsoho e omileng ho tloha ho Access Control System, Card Reader, Keypad, Push Button, PIR, joalo-joalo. Liloko, Lithupa tsa Motlakase, Lits'oants'o tsa Monyako oa Magnetic, joalo-joalo. Lisebelisoa tsohle tse hokelang li tlameha ho ba Lethathamong la UL. Liphetho li tla sebetsa ka mekhoa e 'meli ea Fail-Safe le/kapa Fail-Sireletsehile. Diyuniti li etselitsoe ho tsamaisoa ke mohloli o le mong o tloaelehileng oa matla o tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela, kapa mehloli e 'meli (2) e ikemetseng ka ho felletseng, e le' ngoe (1) e fana ka matla a ts'ebetso ea boto le e 'ngoe bakeng sa senotlolo / lisebelisoa. matla. FACP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Karolo ea ho khaola alamo ea mollo e ka khethoa ka bomong bakeng sa liphetho life kapa life tse 'ne (4).
Chate ea Tšupiso ea Tlhophiso ea ACM4 le ACM4CB:
| Nomoro ea Mohlala oa Altronix | Palo ea Litholoana | Liphetho tse Sirelelitsoeng tsa Fuse | Liphetho tse Sirelelitsoeng tsa PTC | Ratings khumo | Class 2 Rated Power-Limited Auto- esettable | Lintlha tsa Setsi |
| EA-4-ACM | 4 | 3A |  Kopano e nyane |
|||
| ACM4CB | 4 | 2.5A |
UL Lists le File Linomoro:
UL File # BP6714.
UL 294* - UL e thathamisitsoe bakeng sa likarolo tsa Sistimi ea Taolo ea Phihlelo.
*ANSI/UL 294 7th Ed. Maemo a Tshebetso a Taolo ya ho Kena:
Tlhaselo e Senyang - I; Mamello - IV; Line Security - I; Matla a Emeng ka Matla - I. "Thepa ea Matšoao" E Ithutoang ho CSA Standard C22.2 No.205-M1983
Litlhaloso:
- 12 ho 24 volt AC kapa ts'ebetso ea DC (ho beha ha ho hlokahale).
- Ratings Keletso: 12VDC @ 0.4A kapa 24VDC @ 0.2A.
- Likhetho tsa ho kenya motlakase:
a) Kenyeletso e le 'ngoe (1) e tloaelehileng ea matla (boto le matla a senotlolo).
b) Lisebelisoa tse peli (2) tsa motlakase tse arohaneng (e le 'ngoe (1) bakeng sa matla a boto le e le' ngoe (1) bakeng sa motlakase oa senotlolo / lisebelisoa). - Tse 'nè (4) tse kenyang mokhoa oa ho laola ho kena:
a) Maikutlo a mane (4) ka tloaelo a bulehileng (NO).
b) Lisebelisoa tse 'nè (4) tse bulehileng tsa pokello ea metsi.
c) Kopanyo efe kapa efe ea tse kaholimo. - Liphetho tse 'ne (4) tse laoloang ka boikemelo:
a) Lisebelisoa tse 'nè (4) tsa Fail-Sireletsehile le/kapa Fail-Sireletsa matla a tsoang.
b) Mefuta e mene (4) e omileng "C" 5A e lekantsoe liphetho tsa relay (ACM4 feela).
c) Motsoako ofe kapa ofe oa tse ka holimo (ACM4 feela). - Lisebelisoa tse 'nè (4) tse thusang (tse sa fetoheng).
- Lintlha tse hlahisoang:
- Li-Fuse li lekantsoe 2.5A ka 'ngoe.
- Li-PTC li fuoe 2A e 'ngoe le e 'ngoe. - Fuse e kholo e lekantsoe ho 10A.
Hlokomela: Bakeng sa Mehlala ACM4/ACM4CB e bua ka ACM4 le ACM4CB Configuration Reference Chart, Pg 2.
Hlokomela: Mocheso oa ho sebetsa o lokela ho ba 0 ho ea ho 49ºC. - Li-LED tse khubelu li bonts'a hore lihlahisoa li hlahisoa (li-relays li matlafalitsoe).
- Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse 'ne (4).
Likhetho tsa ho kenya Alarm ea Mollo:
a) Ka tloaelo bula (NO) kapa ka tloaelo ho koaloa (NC) omileng ho kenya letsoho.
b) Kenyelletso ea ho khutlisetsa polarity ho tsoa ho potoloho ea matšoao a FACP. - FACP output relay (foromo “C” contact rated @ 1A/28VDC, ha e hlahlojoe ke UL).
- LED e tala e bonts'a ha FACP e khaotsoe.
- Li-terminal blocks tse ka ntshuwang li thusa ho kenya habonolo.
Litekanyo tsa Boto (L x W x H hoo e ka bang): 5.175"x 3.36"x 1.25" (131.5mm x 85.6mm x 31.8mm).
Litaelo tsa ho Kena:
Mekhoa ea ho thaepa e tla lumellana le Khoutu ea Naha ea Motlakase/NFPA 70/ANSI, le likhoutu tsohle tsa lehae le ba boholong ba nang le matla a ho laola. Sehlahisoa se reretsoe ho sebelisoa ka tlung feela.
- Sheba Taelo ea Tlhophiso ea Seboka sa Sub Assembly bakeng sa ho kenya Rev. MS050913.
Ka hloko review: Setšoantšo se Tloaelehileng sa Kopo (leq. 4) Lisebelisoa tsa LED (leq. 5) Lethathamo la Boitsebiso ba Terminal (leq. 5) Lits'oants'o tsa ho hoka (leq. 6) - Phepelo ea motlakase:
Li-unit li ka tsamaisoa ka Power Supply e le 'ngoe (1) e Listed Access Control Power Supply e tla fana ka matla bakeng sa ts'ebetso ea boto ka bobeli le lisebelisoa tsa ho notlela kapa tse peli (2) tse arohaneng tse thathamisitsoeng tse thathamisitsoeng tsa Power Control, e le 'ngoe (1) ho fana ka matla bakeng sa ts'ebetso ea boto. le e 'ngoe ho fana ka matla bakeng sa lisebelisoa tsa ho notlela le/kapa lisebelisoa tsa taolo ea phihlello.
Hlokomela: Matla a kenyang e ka ba 12 ho isa ho 24 volts AC kapa ts'ebetso ea DC.
Lintlha tse Kenyellelitsoeng (ACM4/ACM4CB feela): 12VDC @ 0.4A kapa 24VDC @ 0.2A.
a) Phepelo ea motlakase e le 'ngoe:
Haeba yuniti le lisebelisoa tsa ho notlela li lokela ho tsamaisoa ho sebelisoa Sesebelisoa se le seng sa Lethathamo la ho Laola Matla a ho Finyella, hokela tlhahiso (12 ho 24 volts AC kapa DC) ho li-terminals tse tšoailoeng [- Power +].
b) Lisebelisoa tse peli tsa phepelo ea motlakase (setšoantšo sa 1, leqephe la 5):
Ha ho lakatseha tšebeliso ea Lisebelisoa tse peli tse thathamisitsoeng tsa Matla a ho Laola Matla, li-jumpers J1 le J2 (tse ka letsohong le letšehali la li-terminals tsa matla / taolo) li tlameha ho khaoloa. Hokela matla a yuniti ho liteminale tse tšoailoeng [- Matla +] 'me u hokele matla bakeng sa lisebelisoa tsa ho notlela lienteng tse tšoailoeng [- Control +].
Hlokomela: Ha u sebelisa DC Listed Access Control Power Supplies polarity e tlameha ho hlokomeloa.
Ha u sebelisa AC Listed Access Control Power Supplies polarity ha ea lokela ho hlokomeloa.
Hlokomela: Bakeng sa ho latela melao ea UL, phepelo ea motlakase e tlameha ho ngolisoa ka UL bakeng sa Litsamaiso tsa Taolo ea Phihlelo le lisebelisoa. - Dikgetho tsa tlhahiso (Setšoantšo sa 1, leqepheng la 5):
ACM4 e tla fana ka liphetho tse 'ne (4) tse fetotsoeng tsa matla, liphetho tse' nè (4) tse omeletseng tsa "C", kapa motsoako ofe kapa ofe oa matla a mabeli a fetotsoeng le lihlahisoa tsa "C", hammoho le lisebelisoa tse 'nè (4) tse sa fetoheng tsa motlakase. ACM4CB e tla fana ka lisebelisoa tse 'nè (4) tsa motlakase tse fetotsoeng kapa tse' nè (4) tse sa fetoheng tsa matla a thusang.
a) Liphetoho tsa Power tse fetotsoeng:
Hokela molaetsa o fosahetseng (–) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [COM]. Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
b) Liphetho tsa Foromo ea "C" (ACM4):
Ha foromo ea "C" e lakatseha, fuse e tsamaisanang le eona (1-4) e tlameha ho tlosoa. Hokela negative (–) ea phepelo ea motlakase ka kotloloho ho sesebelisoa sa ho notlela. Hokela positi (+) ea phepelo ea motlakase ho theminale e tšoailoeng [C]. Bakeng sa ts'ebetso ea Fail-Safe, hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NO].
c) Liphetho tsa Matla a Thusang (ha a sa fetoloa):
Hokela sesebediswa se nepahetseng (+) se sebediswang ho theminale e ngotsweng [C] le negative (–) ya sesebediswa se tsamaisoang ho theminale e ngotsweng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
Tlhokomeliso: Ha u sebelisa likhoele tsa motlakase tse fokolang matla, sebelisa konokono e arohaneng le e sebelisoang bakeng sa likhoele tse se nang matla. - Likhetho tsa ho kenya letsoho (Setšoantšo sa 1, leqepheng la 5):
a) Ka tloaelo Bula [NO] trigger ea ho kenya:
Lintho tse kenyang 1-4 li kentsoe tšebetsong ke li-senk tse kenang ka tloaelo tse bulehileng kapa tse bulehileng.
Hokela lisebelisoa (libali tsa likarete, li-keypad, kopo ea ho tsoa likonopo, joalo-joalo) ho litheminale tse tšoailoeng [IN] le [GND].
b) Open Collector Sink inputs:
Hokela phanele ea taolo ea phihlello e bulehileng pokello ea pokello ho theminale e tšoailoeng [IN] le e tloaelehileng (negative) ho theminale e tšoailoeng [GND]. - Likhetho tsa Sehokelo sa Alarm ea Mollo (Setšoantšo sa 3 ho isa ho 7, leqepheng la 6-7):
[NC] eo hangata e koetsoeng, eo hangata e bulang [NO] kapa keno e khutlisang polarity ho tsoa ho potoloho ea matšoao ea FACP e tla hlahisa likhetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa tlhahiso, tima switch e tsamaellanang le eona [SW1- SW4] TIMA. Ho tima FACP hakoa bakeng sa tlhahiso, bulela switch e tsamaisanang le eona [SW1-SW4].
a) Ka tloaelo Bula [NO] ho kenya:
Bakeng sa ho se latching hook-up bona Setšoantšo sa 4, leq. 6. Bakeng sa ho latching hook-up bona Setšoantšo sa 5, leq. 7.
b) Ka tloaelo ho Koetsoe [NC] Kenyeletso:
Bakeng sa ho se latching hook-up bona Setšoantšo sa 6, leq. 7. Bakeng sa ho latching hook-up bona Setšoantšo sa 7, leq. 7.
c) Sehlomathisi se kenyang Potoloho ea Pontšo ea FACP:
Hokela positive (+) le negative (–) ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP –]. Hokela FACP EOL ho li-terminals tse tšoailoeng [+ RET –] (polarity e hlalositsoe boemong ba alamo). Jumper J3 e tlameha ho khaoloa (setšoantšo sa 3, leqephe la 6). - FACP Dry form "C" tlhahiso (Setšoantšo sa 1a, leqepheng la 5):
Hokela sesebelisoa se lakatsehang se ka hlahisoang ke khokahanyo e ommeng ea yuniti ho liteminale tse tšoailoeng [NO] le [C] FACP bakeng sa tlhahiso e tloaelehileng e bulehileng kapa litheminale tse tšoailoeng [NC] le [C] FACP bakeng sa tlhahiso e tloaelehileng e koetsoeng. - Ho kenngoa ha tamper switch (Ha e kenyelelitsoe):
Thaba ea UL Listed tamper switjha (Altronix Model TS112 kapa e lekanang) ka holimo ho sebaka se kampetsoeng. Tsamaisa tamper switjha borakete moeling oa sebaka se kampetsoeng hoo e ka bang 2” ho tloha ka lehlakoreng le letona.
Kopanya tamper switjha wiring ho Listed Access Control Panel kapa sesebelisoa se nepahetseng sa UL Listed reporting ho kenya alamo lets'oao ha lemati la sebaka le kampetsoeng le butsoe.
Tlhokomelo:
Yuniti e lokela ho lekoa bonyane hang ka selemo bakeng sa ts'ebetso e nepahetseng. Moqtage ho sehlahisoa se seng le se seng se tlameha ho lekoa bakeng sa maemo a qalang le a sa qaleng mme ts'ebetso ea sebopeho sa FACP e tlameha ho etsisoa.
Tlhahlobo ea LED:
| LED | ON | TLOA |
| LED 1 – LED 4 (Khubelu) | Li-relay tse hlahisoang li matlafalitsoe. | Li-relay li feletsoe ke matla. |
| TRG (Tala) | Ho kenya FACP (boemo ba alamo). | FACP e tloaelehileng (boemo boo e seng alamo). |
Lethathamo la Boitsebiso ba Terminal:
| Terminal Taba | Mosebetsi/Tlhaloso |
| - Matla + | 12VDC ho 24VDC keno e tsoang ho UL Listed Access Control Power Supply. |
| - Taolo + | Li-terminals tsena li ka hokeloa sebakeng se arohaneng, sa UL Listed Access Control Power Supply ho fana ka matla a ts'ebetso a ikhethileng bakeng sa ACM4/ACM4CB (li-jumpers J1 le J2 li tlameha ho tlosoa). |
| KENYA YA TRIGGER 1 – INNPUT 4 IN, GND | Ho tsoa ho lisebelisoa tse tloaelehileng tse bulehileng le / kapa tse bulehileng tsa mokelli (kopo ea ho tsoa likonopo, ho tsoa li-PIR, joalo-joalo). |
| – OUTPUT 1 OUTPUT 4 NC, C, NO, COM | Li-volts tse 12 ho isa ho tse 24 tsa AC/DC li baka liphetho tse laoloang: Fail-Safe [NC positive (+) & COM Negative (—)], Fail-Sireletsehile [HA HO positi (+) & COM Negative (—)], Sehlahisoa se thusang [C positive (+) & COM Negative (—A (Ha u sebelisa matla a AC polarity ha ea lokela ho hlokomeloa), NC, C, NO e fetoha foromo "C" 5A 24VACNDC e lekanyelitse liphello tse omeletseng ha li-fuse li tlosoa (ACM4). Mabitso a bonts'itsoeng a sa qalelle. |
| FACP INTERFACE T, + INNPUT - | Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa trigger li ka buleha ka tloaelo, hangata li koetsoe ho tloha ho FACP output circuit (Fig. 3 through 7, pg. 6-7). |
| FACP INTERFACE NC, C, NO | Foromo "C" relay contact rated @ 1A/28VDC bakeng sa tlaleho ea alamo. (Sephetho sena ha se so hlahlojoe ke UL). |
Setšoantšo se Tloaelehileng sa Tšebeliso:
Litšoantšo tsa ho kopanya:
Setšoantšo sa 2
Ho hokela ka boikhethelo ho sebelisa lisebelisoa tse peli (2) tse ikhethileng tsa phepelo ea motlakase:
Setšoantšo sa 3
Kenyelletso ea ho khutlisa polarity e tsoang ho FACP e bonts'ang sephetho sa potoloho (polarity e bonts'itsoe maemong a alamo): (Sephetho sena ha se so hlahlojoe ke UL)
Setšoantšo sa 4
Ka tloaelo Bula - Non-Latching FACP trigger input:
Setšoantšo sa 5
Ka tloaelo Open FACP Latching trigger input with reset: (Sephetho sena ha se so hlahlojoe ke UL)
Setšoantšo sa 6
Hangata e Koetsoe - Kenyelletso ea FACP e sa Lapeng:
Setšoantšo sa 7
Ka tloaelo e Koetsoe - Latching FACP trigger input with reset (Sephetho sena ha se so hlahlojoe ke UL):
Lintlha:
Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA
Mohala: 718-567-8181
Fax: 718-567-9056
Websebaka: www.altelengx.com
E-mail: info@altronix.com
Warranty ea bophelo bohle
IIACM4/ACM4CB
F22U
Litokomane / Lisebelisoa
 |
Altronix ACM4 Series UL E thathamisitsoeng Sub-Assembly Access Power Controllers [pdf] Tlhophiso Tataiso ACM4 Series UL Listed Sub-Assembly Access Power Controllers, ACM4 Series, UL Listed Sub-Assembly Access Power Controllers, Balaoli ba Matla a Phihlello ea Kopano, Balaoli ba Matla. |
