Uluhlu lwe-ACM4 lwe-UL oludweliswe kwi-Sub-Assembly Access Power Controllers
Isikhokelo soFakelo
Iimodeli zibandakanya:
ACM4: – IziPhumo ezine (4) eziKhuselweyo ngeFuse
ACM4CB: – IziPhumo ezine (4) eziKhuselweyo zePTC
Ngaphezuluview:
I-Altronix i-ACM4 kunye ne-ACM4CB iguqula enye (1) 12 ukuya kwi-24 volt AC okanye igalelo le-DC libe kwiziphumo ezine (4) ezilawulwa ngokuzimeleyo ezidibeneyo okanye ezikhuselweyo ze-PTC. Ezi ziphumo zamandla zinokuguqulelwa kwifom eyomileyo "C" abafowunelwa (ACM4 kuphela). Iziphumo zisebenza ngokuvula umqokeleli we-sink okanye ngokuqhelekileyo evulekileyo (NO) igalelo lokubangela okomileyo ukusuka kwiNkqubo yokuLawula ukuFikelela, i-Card Reader, i-Keypad, i-Push Button, i-PIR, njl. Izitshixo, ukubetha koMbane, iziBambi zeeNcango zeMagnetic, njl.njl. Zonke izixhobo zoqhagamshelo kufuneka zibe Ludwe lweUL. Iziphumo ziya kusebenza kuzo zombini iindlela zokungaphumeleli-uKhuseleko kunye/okanye ukungaphumeleli koKhuseleko. Iiyunithi ziyilelwe ukuba zinikwe amandla ngumthombo omnye oqhelekileyo wamandla oya kubonelela ngamandla kuzo zombini ukusebenza kwebhodi kunye nezixhobo zokutshixa, okanye ezimbini (2) imithombo yamandla ezimeleyo ngokupheleleyo, enye (1) ibonelela ngamandla okusebenza kwebhodi kunye nenye ukutshixa/isincedisi. amandla. Ujongano lweFACP lunika amandla uPhumo oluNgxamisekileyo, ukuJonga iAlarm, okanye ingasetyenziselwa ukuqalisa ezinye izixhobo ezincedisayo. Uphawu lokucima ialam yomlilo lukhethwa ngokwalo nakweziphi na okanye zonke ezine (4) iziphumo.
I-ACM4 kunye ne-ACM4CB iTshati yoLungiselelo yoLungiselelo:
| Inombolo yeModeli ye-Altronix | Inani leZiphumo | IFuse Iziphumo eziKhuselweyo | Iziphumo eziKhuselweyo zePTC | Imilinganiselo yemveliso | Udidi lwesi-2 olukalwe nguMmandla-oMnyino wokuziSebenzisa | Uluhlu lwe-arhente |
| IINKCUKACHA | 4 | 3A |  I-Sub-Assembly |
|||
| ACM4CB | 4 | 2.5A |
Uluhlu lwe-UL kunye File Amanani:
UL File # BP6714.
UL 294* – ULuhlu lwe-UL kwiiYunithi zeNkqubo yoLawulo lokuFikelela.
*ANSI/UL 294 7th Ed. Amanqanaba okwenziwa koLawulo lokuFikelela:
Uhlaselo Olutshabalalisayo – I; Ukunyamezela - IV; Ukhuseleko lomgca – mna; Amandla okuma ngaMandla - I. "Isixhobo soMqondiso" siVavanywe ukuya kwi-CSA Standard C22.2 No.205-M1983
Iinkcukacha:
- I-12 ukuya kwi-24 volt AC okanye ukusebenza kwe-DC (ukusetha akufuneki).
- IiNkalo zegalelo: 12VDC @ 0.4A okanye 24VDC @ 0.2A.
- Ukhetho lonikezelo lombane:
a) Enye (1) igalelo lamandla aqhelekileyo (ibhodi kunye namandla okutshixa).
b) Amagalelo amabini (2) ahlukeneyo ombane (enye (1) yombane webhodi kunye nenye (1) yombane wokutshixa/isixhobo sombane). - Izine (4) zeNkqubo yoLawulo lokuFikelela zixhokonxa amagalelo:
a) Amagalelo amane (4) aqhele ukuvula (NO).
b) Amagalelo amane (4) avulekileyo okuqokelela.
c) Nayiphi na indibaniselwano yoku kungasentla. - Iziphumo ezine (4) ezilawulwa ngokuzimeleyo:
a) Ezine (4) eziFail-Safe kunye/okanye ziFail-Khusela iziphumo zombane.
b) Ifom emine (4) eyomileyo "C" 5A ireyithwe iziphumo (ACM4 kuphela).
c) Nakuphi na ukudityaniswa koku kungasentla (ACM4 kuphela). - Izine (4) ezincedisayo zemveliso zamandla (azitshintshi).
- Iireyithingi zemveliso:
– IiFuse zinikwe ireyithi ye-2.5A nganye.
– Ii-PTC zinikwe i-2A nganye. - I-fuse engundoqo ibekwe kwi-10A.
Phawula: Kwiimodeli ze-ACM4 / ACM4CB zibhekisela kwi-ACM4 kunye ne-ACM4CB iTshati yoLungiselelo yokuSetyenziswa, i-Pg 2.
Phawula: Umgangatho wobushushu osebenzayo kufuneka ube ngu-0 ukuya kuma-49ºC. - Ii-LED ezibomvu zibonisa iziphumo zivuselelwe (ukuhanjiswa amandla).
- Ukuqhawula i-Alarm yoMlilo (i-latching okanye i-non-latching) ikhethwa ngokukodwa kuzo naziphi na okanye zonke ezine (4) iziphumo.
Iinketho zongeniso zeAlarm yoMlilo:
a) Ngokuqhelekileyo vula (NO) okanye ngokuqhelekileyo kuvalwe (NC) igalelo loqhagamshelwano elomileyo.
b) Igalelo lokubuyisela umva kwe-polarity ukusuka kwisekethe yomqondiso we-FACP. - FACP output relay (ifom "C" contact rated @ 1A/28VDC, ayivandlakanywa yi UL).
- I-LED eluhlaza ibonisa xa ukuqhawulwa kwe-FACP kuqalisiwe.
- Iibhloko ze-terminal ezisuswayo ziququzelela lula ukufakela.
Imilinganiselo yeBhodi (L x W x H kuqikelelwa): 5.175"x 3.36"x 1.25" (131.5mm x 85.6mm x 31.8mm).
Imiyalelo yokuFakela:
Iindlela zocingo ziya kuhambelana neKhowudi yoMbane yeSizwe / NFPA 70 / ANSI, kunye nazo zonke iikhowudi zendawo kunye namagunya anegunya. Imveliso yenzelwe ukusetyenziswa kwangaphakathi kuphela.
- Jonga kuMyalelo woFakelo lweNdibano yeNkxaso yokuFaka uMfundisi MS050913.
Ngononophelo review: Idayagram yeSicelo esiQhelekileyo (iphe. 4) Uxilongo lwe-LED (iphe. 5) Itheyibhile yokuchongwa kwetheminali (iphe. 5) I-Hook-up Diagrams (iphe. 6) - Ukufakwa kombane:
Iiyunithi zinokuthi zinikwe amandla kunye (1) ULuhlu lokuLawula ukuFikelelwa koMbane oza kubonelela ngamandla kuzo zombini iibhodi zokusebenza kunye nezixhobo zokutshixa okanye ezimbini (2) ezahlukeneyo zoLuhlu loLawulo lokuFikelela aMandla oMbane, enye (1) ukunika amandla okusebenza kwebhodi. kunye nezinye ukunika amandla kwizixhobo zokutshixa kunye/okanye ii-hardware zolawulo lofikelelo.
Phawula: Amandla egalelo anokuba yi-12 ukuya kwi-24 volts AC okanye ukusebenza kwe-DC.
IiReyithingi zeNgeniso (ACM4/ACM4CB kuphela): 12VDC @ 0.4A okanye 24VDC @ 0.2A.
a) Ukufakwa kombane omnye:
Ukuba iyunithi kunye nezixhobo zokutshixa ziza kunikwa amandla kusetyenziswa Unikezelo lwaMandla oLudwe lokuFikelela oluLudwe, qhagamshela imveliso (i-12 ukuya kwi-24 volts AC okanye i-DC) kwii-terminals eziphawulwe [- Amandla +].
b) Amagalelo ombane aphindwe kabini (umzobo 1, iphe. 5):
Xa kufunwa ukusetyenziswa kweZibonelelo zaMandla zokuFikelela eziLudwe ziLudwe, i-jumpers J1 kunye ne-J2 (ebekwe ngakwesobunxele kwii-terminals zamandla / zokulawula) kufuneka zinqunywe. Qhagamshela amandla eyunithi kwiitheminali eziphawulwe [- Amandla +] kwaye uqhagamshele amandla kwizixhobo zokutshixa kwiitheminali eziphawulwe [- Control +].
Phawula: Xa usebenzisa iDC Listed Access Control Power Supplies polarity kufuneka ijongwe.
Xa usebenzisa i-AC Listed Access Control Power Supplies polarity akufuneki ijongwe.
Phawula: Uthotyelo lwe-UL unikezelo lwamandla kufuneka ludweliswe yiUL yeeNkqubo zoLawulo loFikelelo kunye nezixhobo. - Iinketho zemveliso (Umfanekiso wesi-1, iphe. 5):
I-ACM4 iya kubonelela ngeziphumo ezine (4) ezitshintshiweyo zamandla, ezine (4) ezomileyo zefom "C" iziphumo, okanye nayiphi na indibaniselwano yawo omabini amandla atshintshiweyo kunye nefom "C" iziphumo, kunye neziphumo ezine (4) ezingatshintshiyo zamandla ancedisayo. I-ACM4CB iya kubonelela ngeziphumo ezine (4) ezitshintshiweyo zamandla okanye ezine (4) ezingatshintshiyo zombane ezincedisayo.
a) Ukutshintshwa kweziphumo zaMandla:
Qhagamshela igalelo elikhabayo (–) lesixhobo esiqhutywayo kwitheminali ephawulweyo [COM]. Kumsebenzi oFail-Safe, qhagamshela igalelo elilungileyo (+) lesixhobo esinikwa amandla kwitheminali ephawulwe [NC]. Kumsebenzi oFail-Secure, qhagamshela igalelo elilungileyo (+) lesixhobo esinikwa amandla kwi-terminal ephawulwe [HAYI].
b) Iziphumo zeFomu “C” (ACM4):
Xa iziphumo zefom "C" zifunwa i-fuse yemveliso ehambelanayo (1-4) kufuneka isuswe. Qhagamshela i-negative (–) yonikezelo lwamandla ngqo kwisixhobo sokutshixa. Qhagamshela i-positive (+) yonikezelo lwamandla kwitheminali ephawulwe [C]. Kumsebenzi oFail-Safe, qhagamshela i-positive (+) yesixhobo esinikwa amandla kwi-terminal ephawulwe [NC]. Kumsebenzi oFail-Secure, qhagamshela i-positive (+) yesixhobo esinikwa amandla kwi-terminal ephawulwe [HAYI].
c) Iziphumo zoMbane oNcedisayo (azitshintshi):
Qhagamshela igalelo elivumayo (+) lesixhobo esenziwa amandla kwitheminali ephawulwe [C] kunye nekhabathi (–) yesixhobo esenziwa amandla kwitheminali ephawulwe [COM]. Imveliso ingasetyenziselwa ukunika amandla kubafundi bekhadi, iiphedi zamaqhosha njl.
Qaphela: Xa iingcingo zombane kwiziphumo ezisikelwe umda sebenzisa i-knockout eyahlukileyo kuleyo isetyenziselwa ukubiyela okungenamandla-mda. - Iinketho zokubangela igalelo (Umfanekiso wesi-1, iphe. 5):
a) Ngesiqhelo Vula [HAYI] igalelo lokuqalisa:
Amagalelo 1-4 avulwa ngamagalelo aqhelekileyo avulekileyo okanye avulekileyo okuqokelela.
Qhagamshela izixhobo (izifundi zekhadi, iiphedi zamaqhosha, cela ukuphuma amaqhosha njl.njl.) kwiitheminali eziphawulwe [IN] kunye no [GND].
b) Vula amagalelo eSinki yoMqokeleli:
Qhagamshela indawo yolawulo yofikelelo isiphumo somqokeleli ovulekileyo kwi-terminal ephawulwe [IN] kunye neqhelekileyo (negative) kwi-terminal ephawulwe [GND]. - Iinketho zoMlilo weAlarm Interface (Imifanekiso yesi-3 ukuya kweyesi-7, iphe. 6 – 7):
Okuqhelekileyo kuvalwe [NC], okuqhele ukuvuleka igalelo [NO] okanye igalelo lokubuyisela umva kwe polarity ukusuka kwisekethe yomqondiso weFACP iyakuxhokonxa iziphumo ezikhethiweyo. Ukwenza i-FACP Cima uqhagamshelwano lwemveliso cima iswitshi ehambelanayo [SW1- SW4] CIMA. Ukuyekisa uqhagamshelo lwe-FACP kwimveliso vula iswitshi ehambelanayo [SW1-SW4] ON.
a) Ngesiqhelo Vula [NO] igalelo:
Ukufumana i-hook-up engabonakaliyo jonga umfanekiso we-4, iphe. 6. Ukukhangela i-hook-up jonga umfanekiso wesi-5, iphe. 7.
b) Ngokwesiqhelo kuvalwe igalelo [NC]:
Ukufumana i-hook-up engabonakaliyo jonga umfanekiso we-6, iphe. 7. Ukukhangela i-hook-up jonga umfanekiso wesi-7, iphe. 7.
c) I-FACP yokuSayina igalelo lokufaka igalelo leSekethe:
Qhagamshela i-positive (+) kunye ne-negative (–) ukusuka kwimveliso yesekethe yomqondiso we-FACP kwiitheminali eziphawulwe [+ INP –]. Qhagamshela i-FACP EOL kwiitheminali eziphawulwe [+ RET –] (i-polarity ibhekiselele kwimeko ye-alam). I-Jumper J3 kufuneka inqunywe (umzobo 3, iphe. 6). - FACP Dry form "C" output (Umfanekiso 1a, iphe. 5):
Qhagamshela isixhobo esinqwenelekayo ukuba sivuswe yiyunithi eyomileyo yoqhagamshelwano oluphumayo kwiitheminali eziphawulwe [NO] kunye no [C] FACP kwimveliso eqhelekileyo evulekileyo okanye iitheminali eziphawulwe [NC] kunye [C] FACP kwimveliso eqhelekileyo evaliweyo. - Ufakelo lwe-tamper switsha (Ayiqukwanga):
Mount UL Uluhlu tamper switch (i-Altronix Model TS112 okanye ilingana) phezulu kwendawo ebiyelweyo. Slayida i-tamper tshintshela isibiyeli kungqameko lwendawo ebiyelweyo malunga ne-2” ukusuka kwicala lasekunene.
Qhagamshela tamper tshintshela iingcingo kwiPaneli yoLawulo loFikelelo oluLudweyo igalelo okanye isixhobo esifanelekileyo sokunika ingxelo se-UL sokuvula umqondiso we-alam xa ucango lwesivalo luvuliwe.
Ugcino:
Iyunithi kufuneka ivavanywe kanye ngonyaka ukuba isebenze ngokufanelekileyo. UmqulutagI-e kwimveliso nganye kufuneka ivavanywe kuzo zombini iindawo zokuxhobisa kunye nezingaqhubi kunye nokusebenza kojongano lweFACP kufuneka lufaniswe.
Uxilongo lwe-LED:
| I-LED | ON | CIMA |
| I-LED 1 – LED 4 (Bomvu) | Ugqithiso lwemveliso lunikwe amandla. | Ugqithiso lwemveliso lucinywe amandla. |
| TRG (Green) | Igalelo le-FACP licushiwe (imeko ye-alarm). | FACP eqhelekileyo (imeko engeyo-alarm). |
Itheyibhile yokuchongwa kwetheminali:
| Ixesha lesiphelo | Umsebenzi/Inkcazo |
| - Amandla + | I-12VDC ukuya kwi-24VDC igalelo elivela kwi-UL Listed Access Control Power Supply. |
| — Ulawulo + | Ezi terminals zinokudityaniswa kwindawo eyahlukileyo, i-UL Listed Access Control Power Supply ukubonelela ngamandla okusebenza awodwa kwi-ACM4/ACM4CB (i-jumpers J1 kunye ne-J2 kufuneka isuswe). |
| I-TRIGGER INPUT 1 – INPUT 4 IN, GND | Ukusuka ngokuqhelekileyo ukuvula kunye / okanye ukuvula umqokeleli we-sink trigger inputs (isicelo sokuphuma kwamaqhosha, ukuphuma kwe-PIRs, njl.). |
| – ISIPHUMO 1 ISIPHUMO 4 NC, C, NO, COM | I-12 ukuya kwi-24 volts ye-AC/DC ibangela iziphumo ezilawulwayo: UFail-Safe [NC positive (+) & COM Negative (—)], Ukungaphumeleli-uKhuseleko [AKUKHO okulungileyo (+) kunye ne-COM engalunganga (—)], Imveliso encedisayo [C positive (+) & COM Negative (—A (Xa usebenzisa i-AC unikezelo lwamandla polarity kufuneka ijongwe), NC, C, HAYI ibe yifomu “C” 5A 24VACNDC ireyithwe iziphumo ezomileyo xa iifuse zisusiwe (ACM4). Abafowunelwa ababoniswe kwimeko engavuswanga. |
| FACP INTERFACE T, + INPUT — | I-Fire Alarm Interface ibangela igalelo elivela kwi-FACP. Amagalelo e-trigger anokuthi avuleke ngokuqhelekileyo, avaliwe ngokuqhelekileyo kwi-FACP output circuit (Umfanekiso 3 nge-7, pg. 6-7). |
| I-FACP INTERFACE NC, C, NO | Form "C" relay contact rated @ 1A/28VDC for alarm reporting. (Le mveliso ayizange ivavanywe yi-UL). |
Idayagram yosetyenziso oluqhelekileyo:
Imizobo yokudibanisa:
Umzobo 2
Ukudityaniswa kwekhonkco usebenzisa ezimbini (2) amagalelo obonelelo lwamandla awodwa:
Umzobo 3
Igalelo lokubuyisela umva kwe-polarity ukusuka kwimveliso yesekethe yomqondiso we-FACP (i-polarity ichazwe kwimeko ye-alam): (Le mveliso ayizange ivavanywe yi-UL)
Umzobo 4
Ngokuqhelekileyo ivuliwe-I-FACP engabambeleliyo ifaka igalelo lokuqalisa:
Umzobo 5
Ngesiqhelo Vula i-FACP Latching igalelo lokuqalisa ngokusetha kwakhona: (Le mveliso ayizange ivavanywe yi-UL)
Umzobo 6
Ngokuqhelekileyo kuvalwe-I-FACP eNgabambekiyo ifaka igalelo lokuqalisa:
Umzobo 7
Ngesiqhelo Ivalwe-IFaCP ivula igalelo ngokusetha ngokutsha (Le mveliso ayivavanywanga yi-UL):
Amanqaku:
I-Altronix ayinaxanduva lwazo naziphi na iimpazamo zokuchwetheza.
140 58th Street, Brooklyn, New York 11220 USA
Ifowuni: 718-567-8181
Ifeksi: 718-567-9056
Webindawo: www.altronix.com
I-imeyile: info@altronix.com
Iwaranti yobomi bonke
IIACM4/ACM4CB
F22u
Amaxwebhu / Izibonelelo
 |
I-Altronix ACM4 Series UL eluhlu lwe-Sub-Assembly Access Power Controllers [pdf] Isikhokelo soFakelo ACM4 Series UL Listed Sub-Assembly Access Power Controllers, ACM4 Series, UL Listed Sub-Assembly Access Power Controllers, Assembly Access Power Controllers, Power Controllers |
