ACM4 Series UL Lissafin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfi
Jagoran Shigarwa
Model sun hada da:
ACM4: – Hudu (4) Abubuwan Kariyar Fuse
ACM4CB: – Hudu (4) Abubuwan Kariyar PTC
Ƙarsheview:
Altronix ACM4 da ACM4CB suna juyar da ɗaya (1) 12 zuwa 24 volt AC ko shigarwar DC zuwa huɗu (4) waɗanda aka haɗa da kansu ko abubuwan kariya na PTC. Ana iya canza waɗannan fitilun wutar lantarki zuwa busassun sigar “C” lambobin sadarwa (ACM4 kawai). Ana kunna fitarwa ta hanyar buɗaɗɗen mai tattarawa ko kuma buɗe (NO) busassun shigar da shigar da busassun bayanai daga Tsarin Gudanarwa, Card Reader, faifan maɓalli, Maɓallin turawa, PIR, da sauransu. Ƙungiyoyin za su tura wutar lantarki zuwa na'urorin sarrafa dama iri-iri ciki har da Mag. Makullai, Yajin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Duk na'urorin haɗin kai dole ne su kasance UL Lissafta. Abubuwan da aka fitar za su yi aiki a duka Fail-Safe da/ko Fail-Secure yanayin. An tsara raka'a don yin amfani da su ta hanyar tushen wutar lantarki guda ɗaya wanda zai ba da wutar lantarki duka biyun aikin hukumar da na'urorin kulle, ko biyu (2) maɓuɓɓugar wutar lantarki masu zaman kansu gaba ɗaya, ɗaya (1) samar da wutar lantarki don aikin hukumar da ɗayan don kulle / kayan haɗi. iko. Fuskar FACP tana ba da damar Ƙaddamar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da su don haifar da wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duk abubuwan da aka fitar (4).
ACM4 da ACM4CB Tsarin Magana Kanfigareshan:
| Lambar Model Altronix | Adadin abubuwan da aka fitar | Abubuwan da aka Kare Fuse | Abubuwan Kariyar PTC | Rimar fitarwa | Matsayi na 2 Madaidaicin Ƙarfin Ƙarfi-Aikace-aikace | Jerin Hukumar |
| ACM4 | 4 | 3A |  Karamar Majalisa |
|||
| Saukewa: ACM4CB | 4 | 2.5 A |
UL Lists kuma File Lambobi:
UL File Saukewa: BP6714.
UL 294* - UL da aka jera don Rukunin Tsarin Gudanar da Samun damar.
*ANSI/UL 294 7th Ed. Matakan Ayyukan Gudanar da Samun damar:
Harin Lalacewa - I; Jimiri - IV; Tsaron layi - I; Ƙarfin Tsaya - I. "Kayan Sigina" An Ƙimar zuwa CSA Standard C22.2 No.205-M1983
Ƙayyadaddun bayanai:
- 12 zuwa 24 volt AC ko aikin DC (ba a buƙatar saitin).
- Ratings na shigarwa: 12VDC @ 0.4A ko 24VDC @ 0.2A.
- Zaɓuɓɓukan shigar da wutar lantarki:
a) Daya (1) shigar da wutar lantarki gama gari (ikon allo da kullewa).
b) Biyu (2) keɓaɓɓen abubuwan shigar da wuta (ɗaya (1) don wutar lantarki da ɗaya (1) don ikon kulle / hardware). - Hudu (4) Tsarin Gudanar da Samun damar shigar da abubuwan shiga:
a) Abubuwan shigarwa huɗu (4) yawanci buɗewa (NO).
b) Hudu (4) buɗaɗɗen shigar ruwa mai tarawa.
c) Duk wani hade na sama. - Hudu (4) abubuwan sarrafawa masu zaman kansu:
a) Hudu (4) Rashin-Lafiya da/ko Ƙarfin-Tsarin abubuwan samar da wutar lantarki.
b) Busassun nau'i huɗu (4) “C” 5A rated relay results (ACM4 kawai).
c) Duk wani haɗuwa na sama (ACM4 kawai). - Hudu (4) na'urorin wutar lantarki na taimako (ba a kunna ba).
- Ƙimar fitarwa:
- Fuses an kimanta 2.5A kowanne.
- Ana kimanta PTCs 2A kowanne. - An ƙididdige babban fuse a 10A.
Lura: Don Samfuran ACM4/ACM4CB koma zuwa ACM4 da ACM4CB Tsarin Tunanin Kanfigareshan Shafi 2.
Lura: Yanayin zafin aiki ya kamata ya zama 0 zuwa 49ºC. - Jajayen LED suna nuna abubuwan da aka kunna (masu kuzarin relays).
- Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duk abubuwan da aka fitar (4).
Zaɓuɓɓukan shigar da ƙararrawar wuta:
a) Buɗe (NO) ko kuma rufe (NC) busasshen shigar da lamba.
b) shigarwar juyar da polarity daga da'irar siginar FACP. - FACP fitarwa relay (form "C" lamba lamba @ 1A/28VDC, ba UL kimanta).
- Koren LED yana nuna lokacin da aka jawo cire haɗin FACP.
- Tubalan tasha masu cirewa suna sauƙaƙe sauƙin shigarwa.
Girman allo (L x W x H kimanin): 5.175" x 3.36" x 1.25" (131.5mm x 85.6mm x 31.8mm).
Umarnin Shigarwa:
Hanyoyin wayoyi za su kasance daidai da Lambar Wutar Lantarki ta Ƙasa/NFPA 70/ANSI, kuma tare da duk lambobin gida da hukumomin da ke da iko. Anyi nufin samfur don amfanin cikin gida kawai.
- Koma zuwa Umarnin Shigarwa na Ƙarshen Majalisar don hawa Rev. MS050913.
A hankali sakeview: Tsarin aikace-aikace na yau da kullun (shafi na 4) LED Diagnostics (shafi na 5) Teburin Gano Tasha (shafi na 5) Zane-zane na ƙugiya (shafi na 6) - Shigar da wutar lantarki:
Ana iya kunna raka'a tare da wadataccen wutar lantarki (1) da aka jera wanda zai ba da wutar lantarki don aikin jirgi da na'urorin kulle ko guda biyu (2) Rarraba Kayan Wutar Lantarki na Lissafi, ɗaya (1) don samar da wutar lantarki don aikin hukumar. da ɗayan don samar da wuta don na'urorin kulle da/ko samun damar sarrafa kayan aikin.
Lura: Ƙarfin shigarwa na iya zama ko dai 12 zuwa 24 volts AC ko aiki na DC.
Ƙimar shigarwa (ACM4/ACM4CB kawai): 12VDC @ 0.4A ko 24VDC @ 0.2A.
a) Shigar da wutar lantarki guda ɗaya:
Idan za'a kunna naúrar da na'urorin kulle ta amfani da Lissafin Wutar Lantarki na Ikon Samar da Wutar Lantarki, haɗa abin fitarwa (12 zuwa 24 volts AC ko DC) zuwa tashoshi masu alamar [- Power +].
b) Abubuwan shigar wutar lantarki guda biyu (Hoto 1, shafi 5):
Lokacin da ake son amfani da Kayayyakin Wutar Lantarki na Ikon Samun Lissafi guda biyu, masu tsalle-tsalle J1 da J2 (wanda ke gefen hagu na tashoshin wutar lantarki) dole ne a yanke. Haɗa wuta don naúrar zuwa tashoshi masu alama [- Power +] kuma haɗa wuta don na'urorin kulle zuwa tashoshi masu alama [- Control +].
Lura: Lokacin amfani da Lissafin Lissafin Ikon Samun Ƙarfin Kayayyakin Wutar Lantarki dole ne a kiyaye polarity.
Lokacin amfani da Jerin AC Lissafta Ikon Samar da Wutar Kayan Wuta ba buƙatar kiyaye polarity ba.
Lura: Don yarda da UL dole ne kayan wutar lantarki su kasance UL An jera su don Tsarin Gudanar da Samun dama da na'urorin haɗi. - Zaɓuɓɓukan fitarwa (Hoto na 1, shafi na 5):
ACM4 zai samar da ko dai guda hudu (4) da aka canza wutar lantarki, hudu (4) busassun nau'i na "C", ko duk wani hade na biyu da aka canza da kuma samar da "C" da kuma nau'i hudu (4) da ba a kunna wutar lantarki ba. ACM4CB zai samar da wutar lantarki guda huɗu (4) da aka canza ko kuma huɗu (4) waɗanda ba a kunna wutar lantarki ba.
a) Abubuwan da aka Canja Wuta:
Haɗa madaidaicin shigarwar (-) na na'urar da ake kunna wuta zuwa tasha mai alama [COM]. Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC]. Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tasha mai alama [NO].
b) Form "C" fitarwa (ACM4):
Lokacin da ake son fitar da nau'i na "C" dole ne a cire fuse mai dacewa (1-4). Haɗa korau (-) na wutar lantarki kai tsaye zuwa na'urar kullewa. Haɗa tabbataccen (+) na wutar lantarki zuwa tasha mai alama [C]. Don Rashin-Safe aiki haɗa tabbataccen (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC]. Don Ƙarfafa Amintaccen aiki haɗa tabbataccen (+) na na'urar da aka kunna zuwa tashar da aka yiwa alama [NO].
c) Ƙarfin ƙarfi na taimako (ba a kunna ba):
Haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [C] da kuma mummunan (-) na na'urar da ake kunna wutar zuwa tasha mai alama [COM]. Ana iya amfani da fitarwa don samar da wuta ga masu karanta katin, maɓalli da sauransu.
Lura: Lokacin da ake yin wayoyi don iyakantaccen kayan aiki yi amfani da ƙwanƙwasa daban da wanda aka yi amfani da shi don wayoyi marasa iyaka. - Zaɓuɓɓukan shigar da kunnawa (Hoto na 1, shafi na 5):
a) Kullum Buɗe shigar [NO]:
Ana kunna abubuwan shigarwa 1-4 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa.
Haɗa na'urori (masu karanta katin, faifan maɓalli, buƙatun fita maɓallan da sauransu) zuwa tashoshi masu alama [IN] da [GND].
b) Buɗe abubuwan shigar da Mai Tari:
Haɗa maɓallin sarrafa damar buɗe fitarwa mai tattarawa zuwa tashar da aka yiwa alama [IN] da na gama gari (mara kyau) zuwa tasha mai alama [GND]. - Zaɓuɓɓukan Interface Ƙararrawa (Hoto na 3 zuwa 7, shafi na 6 – 7):
Rufe [NC], yawanci buɗe [NO] shigarwar ko shigar da juzu'i na polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa. Don kunna cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1- SW4] KASHE. Don kashe cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW4] ON.
a) Akan buɗe shigarwar [NO]:
Don ƙugiya mara latch duba hoto 4, shafi. 6. Don latch ƙugiya duba hoto 5, shafi. 7.
b) Akan rufe [NC] shigarwa:
Don ƙugiya mara latch duba hoto 6, shafi. 7. Don latch ƙugiya duba hoto 7, shafi. 7.
c) FACP Siginar shigarwar da'ira:
Haɗa tabbataccen (+) da korau (-) daga fitowar siginar FACP zuwa tashoshi masu alamar [+ INP -]. Haɗa FACP EOL zuwa tashoshi masu alama [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa). Jumper J3 dole ne a yanke (Fig. 3, shafi na 6). - FACP Dry form “C” fitarwa (Hoto 1a, shafi na 5):
Haɗa na'urar da ake so don haifar da busasshiyar fitowar lamba ta naúrar zuwa tashoshi masu alamar [NO] da [C] FACP don buɗe fitarwa ta al'ada ko tashoshi masu alamar [NC] da [C] FACP don fitowar da aka rufe. - Shigar da tamper canza (Ba a Haɗe):
Dutsen UL Jerin tamper canza (Altronix Model TS112 ko makamancinsa) a saman shingen. Zamar da tampmadaidaicin madaidaicin madaidaicin zuwa gefen shingen kusan 2” daga gefen dama.
Haɗa tampcanza wayoyi zuwa shigarwar da aka jera Control Panel ko na'urar da aka jera ta UL da ta dace don kunna siginar ƙararrawa lokacin da ƙofar shinge ke buɗe.
Kulawa:
Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don aikin da ya dace. Voltage akan kowane kayan aiki dole ne a gwada shi don duka jahohi masu faɗakarwa da waɗanda ba masu tayar da hankali ba kuma dole ne a kwaikwayi aikin FACP.
LED Diagnostics:
| LED | ON | KASHE |
| LED 1 - LED 4 (ja) | Relay(s) na fitar da kuzari. | Relay(s) na fitar da kuzari. |
| TRG (Green) | An kunna shigar da FACP (yanayin ƙararrawa). | FACP na al'ada (yanayin rashin ƙararrawa). |
Teburin Gano Tasha:
| Labarin Ƙarshe | Aiki/Bayyana |
| - Power + | Shigar da 12VDC zuwa 24VDC daga UL Listed Control Power Supply. |
| - Sarrafa + | Ana iya haɗa waɗannan tashoshi zuwa wani keɓan, UL Listed Ikon Samar da Wutar Lantarki don samar da keɓantaccen ikon aiki don ACM4/ACM4CB (dole ne a cire masu tsalle J1 da J2). |
| TARBIYYA 1 - INPUT 4 IN, GND | Daga budewa da/ko buɗaɗɗen abubuwan shigar da ke jawo mai tarawa (buƙatun fita maɓallan, fita PIRs, da sauransu). |
| - FITOWA TA 1 4 NC, C, NO, COM | 12 zuwa 24 volts AC/DC yana jawo abubuwan sarrafawa masu sarrafawa: Rashin-Safe [NC tabbatacce (+) & COM Korau (-)], Fail-Secure [NO tabbatacce (+) & COM Korau (-)], Fitowar taimako [C tabbatacce (+) & COM Korau (-A (Lokacin da amfani da AC samar da wutar lantarki polarity bukatar ba a kiyaye), NC, C, NO zama form "C" 5A 24VACNDC rated bushe fitarwa lokacin da fuses an cire (ACM4). Lambobin sadarwa suna nunawa a cikin yanayin da ba a kunna ba. |
| FACP INTERFACE T, + INPUT - | Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci ana rufe su daga da'irar fitarwa ta FACP (Hoto 3 zuwa 7, shafi 6-7). |
| FACP INTERFACE NC, C, NO | Form "C" tuntuɓi mai lamba @ 1A/28VDC don rahoton ƙararrawa. (UL ba ya kimanta wannan fitarwa). |
Tsarin aikace-aikace na yau da kullun:
Zane-zane na haɗawa:
Hoto 2
Ƙunƙwalwar zaɓi ta amfani da abubuwan shigar wutar lantarki guda biyu (2):
Hoto 3
Shigar da juyar da polarity daga fitowar sigina na FACP (ana yin la'akari da polarity a yanayin ƙararrawa): (UL ba ya kimanta wannan fitarwa)
Hoto 4
Buɗewa Kullum - shigarwar FACP mara-lalacewa:
Hoto 5
Kullum Buɗe shigarwar faɗakarwar FACP Latching tare da sake saiti: (UL ba ta kimanta wannan fitarwa ba)
Hoto 6
Kullum Rufewa - Ba-Latching FACP shigar da fararwa:
Hoto 7
Kullum Rufewa - Latching shigarwar FACP mai faɗakarwa tare da sake saiti (UL ba ta kimanta wannan fitarwa ba):
Bayanan kula:
Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 Amurka
Waya: 718-567-8181
Fax: 718-567-9056
Website: www.altronix.com
Imel: info@altronix.com
Garanti na rayuwa
IIACM4/ACM4CB
F22 ku
Takardu / Albarkatu
 |
Altronix ACM4 Series UL Lissafin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfi [pdf] Jagoran Shigarwa ACM4 Series UL Lissafin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwara |
