ALE-908UVA Aifọwọyi Ifunni Soldering Iṣakoso Unit
“
Awọn pato:
- Awoṣe: ALE Laifọwọyi-Feed Soldering Iṣakoso Unit
- Awọn iyatọ ti o wa: Tọkasi itọnisọna fun pato
awọn itọkasi - Awọn aṣayan agbara: 100V, 120V, 230V
Alaye ọja:
Ẹka Iṣakoso Ifunni Ifunni Aifọwọyi ALE jẹ ilopọ
soldering ọpa apẹrẹ fun daradara ati kongẹ soldering awọn iṣẹ-ṣiṣe.
Ti o ba wa pẹlu orisirisi awọn ẹya ara ẹrọ ati irinše lati jẹki soldering
išẹ.
Awọn ilana Lilo ọja:
Atokọ ikojọpọ:
- Laifọwọyi-Feed Soldering Iṣakoso Unit – 1 kuro
- Okun agbara - 1 kuro
- Afowoyi - 1 kuro
- Ṣeto bọtini fun SF / AL – 1 kuro
- Solder Wire Itọsọna Apo - 1 kuro
Awọn ẹya ara ẹrọ ati awọn isopọ:
Ẹka Iṣakoso Ifunni Ifunni Aifọwọyi ALE pẹlu pẹlu
awọn ẹya wọnyi:
- Solder Reel Iduro
- Ifihan
- USB-A Asopọmọra
- Main Yipada
- SOlder WIRE Itọsọna Kit
- Solder Waya Inlet
- Allen Key ati Ibi ipamọ Spanner
- Fiusi Earth
- Equipotential Asopọ Power Socket ati Main fiusi
- Asopọmọra Agbeegbe Asopọ RJ12 fun FAE ati Robot
Eto - ALES Duro fun ALE250 Laifọwọyi-Ifunni Soldering Iron
- Efatelese Asopọ USB-B
Apejọ katiriji:
Fun apejọ katiriji / iyipada:
- Rii daju pe ohun elo ti yọọ kuro ati ki o tutu si isalẹ.
- Loosen awọn katiriji ṣeto dabaru, yọ awọn ti lo katiriji, ati
fi titun katiriji soke si awọn oniwe-aami. - Ṣatunṣe itọsọna sample katiriji ki o mu katiriji naa pọ
ṣeto dabaru.
FAQ:
Q: Nibo ni MO ti le rii awọn eto itọsọna fun oriṣiriṣi okun waya solder
awọn iwọn ila opin?
A: Awọn eto itọsọna fun oriṣiriṣi awọn iwọn ila opin wa ni: www.jbctools.com/solder-wire-guide-kit-product-2098.html
“`
Ilana itọnisọna
ALE
Laifọwọyi-Ifunni Soldering Iṣakoso Unit
Iwe afọwọkọ yii ni ibamu si awọn itọkasi wọnyi:
Pẹlu Solder Waya Perforation:
fun waya ø 0.8 mm
ALE-908UVA (100 V) ALE-108UVA (120V) ALE-208UVA (230V)
fun waya ø 1.5 mm
ALE-915UVA (100 V) ALE-115UVA (120V) ALE-215UVA (230V)
fun waya ø 1.0 mm
ALE-910UVA (100 V) ALE-110UVA (120V) ALE-210UVA (230V)
fun waya ø 1.6 mm
ALE-916UVA (100 V) ALE-116UVA (120V) ALE-216UVA (230V)
Laisi Perforation Waya Solder:
fun waya ø 0.38 - 0.4 mm
ALE-904UA (100 V) ALE-104UA (120V) ALE-204UA (230V)
fun waya ø 0.70 - 0.78 mm
ALE-907UA (100 V) ALE-107UA (120V) ALE-207UA (230V)
fun waya ø 1.14 - 1.27 mm
ALE-912UA (100 V) ALE-112UA (120V) ALE-212UA (230V)
fun waya ø 1.80 mm
ALE-918UA (100 V) ALE-118UA (120V) ALE-218UA (230V)
fun waya ø 0.45 - 0.56 mm
ALE-905UA (100 V) ALE-105UA (120V) ALE-205UA (230V)
fun waya ø 0.80 - 0.82 mm
ALE-908UA (100 V) ALE-108UA (120V) ALE-208UA (230V)
fun waya ø 1.50 - 1.57 mm
ALE-915UA (100 V) ALE-115UA (120V) ALE-215UA (230V)
fun waya ø 1.2 mm ALE-912UVA (100 V) ALE-112UVA (120 V) ALE-212UVA (230 V)
fun waya ø 0.60 – 0.64 mm ALE-906UA (100 V) ALE-106UA (120 V) ALE-206UA (230V)
fun waya ø 0.90 – 1.10 mm ALE-910UA (100 V) ALE-110UA (120 V) ALE-210UA (230V)
fun waya ø 1.60 – 1.63 mm ALE-916UA (100 V) ALE-116UA (120 V) ALE-216UA (230V)
Akiyesi: Fun iṣẹ ṣiṣe ti o tọ, iwọn ila opin ti okun waya ti o wa ni lilo gbọdọ baramu iwọn ila opin ti itọkasi ALE ti o ra.
2
Atokọ ikojọpọ
Awọn nkan wọnyi wa ninu gbogbo awọn itọkasi:
Ẹka Iṣakoso Tita Ifunni Aifọwọyi …………………. 1 ẹyọkan
Okun Agbara………………………. 1 kuro Ref. 0023717 (120V)
0024080 (230V)
Afọwọṣe …………………………. 1 kuro Ref. 0030217
Ṣeto bọtini * fun SF / AL …………………………. 1 kuro Ref. 0019341
pẹlu:
Spanner …………………………. 1 Unit Allen Key ø 1.5 ………… 1 Unit Allen Key ø 2.5 ………… 1 kuro *ti ti pejọ tẹlẹ ni Ẹka Iṣakoso ALE
3
Atokọ ikojọpọ
Ọkan ninu awọn nkan atẹle wa pẹlu ni ibamu si itọkasi rira:
Awọn ohun elo ti a ti ṣajọpọ tẹlẹ ni Ẹka Iṣakoso
Awọn ohun elo ti a ti ṣajọpọ tẹlẹ ni Ẹka Iṣakoso
Ohun elo Itọsọna Wire Solder ……………………………………………………………………………………………………………………………………
Pẹlu perforation waya solder:
Laisi perforation waya solder:
fun waya ø 0.8 mm / ø 0.032 in
fun waya ø 0.38 – 0.4 mm/ø 0.015 – 0.016 in
– Ref. GALE08V-A
– Ref. GALE04D-A
fun waya ø 1.0 mm / ø 0.040 in
fun waya ø 0.46 – 0.56 mm/ø 0.018 – 0.022 in
– Ref. GALE10V-A
– Ref. GALE05D-A
fun waya ø 1.2 mm / ø 0.047 in
fun waya ø 0.80 – 0.82 mm/ø 0.032 – 0.033 in
– Ref. GALE12V-A
– Ref. GALE08D-A
fun waya ø 1.6 mm / ø 0.063 in
fun waya ø 0.90 – 1.10 mm/ø 0.036 – 0.044 in
– Ref. GALE16V-A
– Ref. GALE10D-A
Akiyesi: Fun iṣẹ ṣiṣe ti o tọ, iwọn ila opin ti okun waya ti o wa ni lilo gbọdọ baamu iwọn ila opin ti ohun elo itọsọna ti o ra.
Awọn eto itọsọna fun oriṣiriṣi awọn iwọn ila opin wa ni: www.jbctools.com/solder-wire-guide-kit-product-2098.html
4
Awọn ẹya ara ẹrọ ati awọn isopọ
Solder Reel Iduro
Ifihan
USB-A Asopọmọra
Main Yipada
Irin Tita Ifunni Aifọwọyi-ALE250*
ALE laifọwọyi-kikọ sii Soldering Iṣakoso Unit
SOlder WIRE Itọsọna
Kit fun ALE250 availabe fun
oriṣiriṣi awọn iwọn ila opin okun waya ti o ta ọja wo oju-iwe 11 + 12
Solder Waya Inlet
Allen Key ati Ibi ipamọ Spanner
Fiusi Earth
Equipotential Asopọ Power Socket ati Main fiusi
ni isalẹ
Asopọmọra Agbeegbe Asopọ RJ12 fun FAE ati Eto Robot
ALES Duro fun ALE250 Laifọwọyi-Ifunni
Irin tita*
Efatelese Asopọ USB-B
* ko si
5
Apejọ katiriji
Fun apejọ katiriji ailewu/ayipada, rii daju pe ohun elo ti yọọ kuro ati pe eyikeyi katiriji ti o wa ni aye ti tutu si isalẹ ki o to tẹle awọn itọsona wọnyi:
Tu skru ti o ṣeto katiriji (1), yọ katiriji ti a lo ti o ba wa tẹlẹ, ki o fi katiriji tuntun sii si ami rẹ (2).
Pataki: O ṣe pataki lati fi katiriji sii patapata fun asopọ to dara. Lo ami naa gẹgẹbi itọkasi (3).
Satunṣe awọn katiriji sample itọsọna (4) ki o si Mu katiriji ṣeto dabaru (1).
ALE250 Auto-kikọ sii soldering Iron
1
Marku 3
2 4
Katiriji Ṣeto dabaru
Nozzle Itọsọna
Itọsọna Tube Ṣeto Apejọ
Ṣii skru itọnisọna tube ṣeto (1) ki o si fi tube itọnisọna sii.
Ṣatunṣe ipari tube itọsọna (2). Fi aafo kan silẹ ti 5 si 7 mm (0.19 si 0.27 in) laarin ipari ati nozzle iṣan (3). Ni kete ti awọn ipo ti wa ni titunse Mu awọn guide tube ṣeto dabaru (1).
Fun mimu to dara julọ lo awọn agekuru (4) lati so tube itọsọna pọ mọ okun irinṣẹ.
Itọsọna Tube Ṣeto dabaru
2
5-7 mm 0.19-0.27 ni
3
1
Itọsọna Tube Ṣeto
4 Awọn agekuru
6
Rirọpo nozzle iṣan
Flux le fa didi ni nozzle iṣan ti eto tube itọsọna ati pe o le jẹ pataki lati rọpo nozzle iṣan ti o wọ tabi ti di. Akiyesi: Iwọn nozzle wa fun iwọn ila opin okun waya kọọkan. Lilo nozzle jẹ pataki bi iwọn ila opin inu rẹ ti ni atunṣe si iwọn ila opin waya ti o ta ọja ati ṣe itọsọna okun waya pẹlu pipe to tobi julọ. Lati rọpo nozzle iṣan, tẹle awọn igbesẹ wọnyi: Lakọọkọ, rii daju pe ohun elo naa ti tutu ki o si gbe okun waya ti o ku ti o le tun wa ninu tube itọsọna (wo oju-iwe 11 ati 12). Yọọ ọpa naa kuro. Yọọ tube itọsona skru (1) ki o yọ tube itọsona kuro ninu ọpa fun mimuurọrun.
1
Ṣeto Tube Itọsọna Yọ orisun omi si inu (2), ni atẹle itọsọna isalẹ ti orisun omi.
2
Ni kete ti a ti tu nozzle iṣan jade lati orisun omi, fa nozzle iṣan jade (3) lẹhinna yọ orisun omi (4).
3
4
Gbe nozzle tuntun si ori tube itọsọna (5).
5
Ni kete ti a ti ṣeto nozzle iṣan si aaye, yi orisun omi naa sori rẹ lati ṣatunṣe nozzle iṣan sinu tube itọsọna (6).
6
7
Tesiwaju
Counters Tun
Tesiwaju Pese: 12 mm
Sẹhin
Tesiwaju
Tesiwaju ọkan Pada
Pese: 12 mm
Irinṣẹ Eto Awọn iṣiro
BackCwonartidnuous Pese: 12 mm
Tẹ ok lati eCxitontinuous
BacFkraCnoçntainisuous ItSaulpipalinedo: 12 mm
Pese: 12 mm
Ipo
Eto
Pese: E1d2it pmrogramm
Tunto
Ṣatunkọ eto
Apejọ Irinṣẹ Ṣeto awọn eto aiyipada
Titiipa awọn paramita atokan
Paa
Iyara
Awọn eto ti kojọpọ Tin gbee si ilana
Tesiwaju
Tesiwaju
So iwọn ila opin irin naa pọ si ẹyọ iṣakoso ni atẹle awọn igbesẹ wọnyi:
Sẹhin
Pese: 12 mm
Pese: 12 mm
Pada
Ṣatunkọ eto
Pese: 12 mm
Iyara Tesiwaju Pese: 12 mm
Eto Ibusọ Eto atokan Eto Irinṣẹ Awọn atunto
Ilu Pọtugali P
Tesiwaju Pese: 12 mm
Tu skru ti a ṣeto silẹ, fi sii ki o si Titari nozzle itọsọna titi ti o fi duro (1) ki o si di skru ṣeto (2)
lẹẹkansi. TheMonde pulọọgi sinu thCeontintuoouos l asopo (3).
Iyara
5.0mm/s
Titiipa awọn paramita atokan
Paa
Tin gbee si ilana
Opin waya Sẹhin
Tẹsiwaju ọkan
Dabaru
Pada Pese: 12 mm
2
Nmu imudojuiwọn
Awọn ibudo rẹ ti wa ni imudojuiwọn Tesiwaju
1
Pese: 12 mm
3
Ṣe o fẹ imudojuiwọn famuwia bi?
Fi gbogbo ọna sinu titi ti o fi duro
Solder Reel Apejọ
Titiipa Reel
Reel Titiipa dabaru
Solder Waya Itọsọna
2 Òkè
1
Solder Reel 3
Solder Waya
Ṣii skru tilekun okun (1) ki o si yọ titiipa titiipa (2) kuro ni ipo. Ṣe akojọpọ ohun ti o ta ọja naa sori ipo (3). 8
Ṣe akojọpọ ohun elo ti o ta ni iru ọna bẹ - nigbawo viewed lati oke – wipe awọn solder waya unwinds lori awọn ẹrọ ti a npinfunni (4). Lẹhinna gba okun waya ti o ta ọja nipasẹ itọnisọna waya (5).
5
Solder Waya
Solder Waya Itọsọna
4 Solder Waya Unwinding Itọsọna
Reel Titiipa Apejọ
Alapin Side ti awọn
4
Titiipa Reel
3
5
Reli
Titiipa dabaru
Lati ṣajọ titiipa okun, ẹgbẹ conical rẹ (1) gbọdọ jẹ itọkasi
Yipada si isalẹ. Titiipa
Alapin Apa
2 ti Axis
Reel Titiipa Top View
Apa Alapin (Titiipa Reel)
3
1
Conical Apa
Ṣe deede ẹgbẹ alapin ti ax (2) pẹlu ẹgbẹ alapin inu (eyiti o ni dabaru) ti titiipa ẹrẹkẹ (3) ki o tun jọpọ si ipo (4).
Akiyesi: Lati ṣe idiwọ fun ohun ti o ta ọja lati yiyi larọwọto tabi dipọ, ṣaaju ki o to di skru titiipa roel rọra tẹ titiipa roel mọlẹ, ṣugbọn o to lati jẹ ki ohun ti o ta ọja yi pada larọwọto, ṣaaju ki o to di skru tilekun roel (5).
9
Iboju Akojọ aṣyn akọkọ
Eto Ṣatunkọ Ipo Ṣeto awọn eto aiyipada Titiipa awọn paramita atokan Awọn eto ti kojọpọ
Eto
Wọle si Akojọ aṣyn akọkọ nipa titẹ, yan “Eto atokan” (1) aBnacdkwtahrden “Wire diameterN” o (n2e) si
satunṣe awọn iye to lọwọlọwọ solder waya opin.
Wire clogging erin
Pada
Tin gbee si ilana
1
Eto atokan
Awọn eto irinṣẹ
Awọn eto ibudo
Awọn iṣiro
Ede
Tunto
Awọn paramita atokan Iyara Ipo titiipa
Tesiwaju 5.0mm/s Pa
2
Iwọn okun waya
1.00mm
Sẹhin
Ko si
Wire clogging erin
On
Pada
ontinuous Kò
Solder WTeimrpeadjuLstoading
Ipele iwọn otutu ṣeto
Paa
Kọja taSelerepwdierleay nipasẹ itọnisọna waya
ati ki o ṣafihan Sltehepetsemoplder waya sinu agbawole nozzle
(1) titi yoo fi de Hhibeesrnatthioen ibugbe (2).
Agbeegbe.
Pada
Yan "Tin reload ilana" ati ki o si lo lati ifunni awọn solder waya ati siwaju titi ti o ba wa jade ti awọn iṣan nozzle.
Ti o ba nilo, farabalẹ tẹ okun waya titi ti o fi wa ni titiipa laarin awọn kẹkẹ ti o yiyi fun okun waya lati bẹrẹ gbigbe siwaju. Jeki titẹ ati lẹhin igba diẹ, okun waya yoo ni ilọsiwaju ni iyara.
Awọn kẹkẹ
Pulọọgi wakati
Iṣẹ wakati orun wakati Hiber wakati Ko si irinṣẹ wakati orun cyc Fed cyc
Waya Tot Itọsọna
Nmu imudojuiwọn
Awọn ibudo rẹ ti ni imudojuiwọn
2
Tesiwaju
1 Pese: 12 mm
Nozzle ti nwọle
Tin reload ilana Eto atokan DToooylosuetwtinagst lati mu famuwia bi? Awọn eto Ibusọ Ede Awọn iṣiro
Tunto
Rii daju pe waya naa kọja nipasẹ nozzle agbedemeji (3) ati ki o wọ tube itọnisọna (4).
10
Eto Ṣatunkọ Ipo Ṣeto awọn eto aiyipada Titiipa awọn paramita atokan Awọn eto ti kojọpọ
Eto
4
Itọsọna Tube
BWaIicnrketwecNalromrogdzgezindlegiadteetec3tion
Pada
WireNone
Ipo
Tesiwaju
Solder Waya ono
Siwaju waya solder nipa titẹ bọtini fifa (1) titi ti okun waya yoo fi jade lati ori (2). Bọtini fifa Waya Solder 1
2
Tabi, solder waya le tun ti wa ni je nipa lilo awọn efatelese P405. Efatelese yẹ ki o wa ni edidi ni ẹhin ti awọn atokan iṣakoso kuro sinu efatelese asopo.
Solder Waya Unloading
Pẹlu Solder Waya Perforation
Lati gbe okun waya solder silẹ pẹlu perforation ti o ti kọja nipasẹ tube itọsọna, ge okun waya laarin itọnisọna waya ati nozzle inlet (1).
Lati yọ okun waya jade kuro ninu tube, di ọpa si ọwọ rẹ ki o tẹ siwaju.
titi ti waya ma duro
Di okun waya ti n jade lati inu nozzle iṣan jade pẹlu pliers kan ki o fa lati ọdọ rẹ titi ti o fi jade patapata.
Waya Itọsọna
1 Nozzle ti nwọle
11
Solder Waya Unloading
Laisi Solder Waya Perforation
Nigbati o ba nlo ohun elo kan laisi perforation okun waya, tẹ
titi ti waya ti wa ni patapata egbo si
unload solder waya. O dara julọ lati yi iyipo naa pẹlu ọwọ bi a ti fa okun waya pada ni ibere
lati tọju rẹ daradara idayatọ lori agba.
Tabi, Ti o ba fẹ, tẹsiwaju bi a ti ṣe apejuwe rẹ tẹlẹ fun sisọ okun waya ti a ti sọda perforated.
Waya Yika Itọsọna
Solder Reel
Solder Waya
12
Awọn ohun elo Itọsọna Disassembly
Fun išišẹ yii, ge asopọ ẹrọ lati awọn mains. Ṣii silẹ eyikeyi okun waya ti n ta ni inu tube itọnisọna, ge asopọ ọpa lati ẹrọ iṣakoso ati ṣii ideri rẹ.
Ṣaaju ki o to gbiyanju lati yọ eyikeyi irinše, jẹ daju lati tú awọn ti o baamu ṣeto skru. Lati ṣe eyi, lo bọtini Allen ati spanner ti a pese pẹlu ibudo naa.
Ni akọkọ tu tube tube ṣeto (1), kẹkẹ guide (4), abẹfẹlẹ ati abẹfẹlẹ clamp (5) ati lẹhinna awọn nozzles (2) + (3). Akiyesi: Awọn paati kẹkẹ * 3 lori awọn ẹrọ laisi perforation okun waya (10) jẹ iyatọ diẹ si awọn ti o ni perforation okun waya.
Nikẹhin, tuka kẹkẹ counter (6), ṣafihan bọtini Allen nipasẹ ṣiṣi iwaju (9) lati ṣii dabaru ti o ṣeto.
Blade Clamp
4 Itọsọna Wheel * 1
Abẹfẹlẹ
5
Nozzle ti nwọle
3
Kẹkẹ atilẹyin * 3
10
Àdéhùn. Nozzle*2
Kẹkẹ isunki * 3
* Awọn paati kẹkẹ 3 fun awọn ẹrọ laisi perforation okun waya.
* 2 Agbedemeji nozzle disassembly
Atako
9
Kẹkẹ 6
Itọsọna Tube
Ṣeto 1
* 1 Itọsọna kẹkẹ beari opin siṣamisi. 13
Apejọ Awọn ohun elo Itọsọna - pẹlu Iṣe Waya Solder:
Atako 1
Kẹkẹ
Adapo akọkọ kẹkẹ counter (1). Rii daju pe titẹsi o tẹle ara rẹ fun dabaru ṣeto ti wa ni ibamu pẹlu ẹgbẹ alapin ti ipo (2). Ti kii ba ṣe bẹ, dabaru ṣeto yoo jade, eyiti o le fa awọn iṣoro fun gbigbe okun waya.
Fi sii bọtini Allen nipasẹ ṣiṣi iwaju yoo jẹ ki o rọrun lati Mu dabaru naa (3).
Allen Key 3
fifi sii nibi
2
Axis, Alapin Apa
Pese nozzle ẹnu (5).
Lẹhinna Fi nozzle agbedemeji sii (4) titi kola rẹ yoo fi duro si ile naa ki o si di dabaru rẹ.
8 Blade Clamp
Blade 7
Wọle
Imuwe 5
Pese kẹkẹ itọnisọna (6) ki o si mu dabaru rẹ pọ.
Pejọ abẹfẹlẹ ni akọkọ (7), lẹhinna gbe abẹfẹlẹ clamp (8) pẹlẹpẹlẹ si ipo kanna ati ki o Mu dabaru naa. Išọra: mu abẹfẹlẹ naa farabalẹ lati yago fun ipalara.
6
Wili Itọsọna * 1
Àdéhùn. Nozzle *2
4
Níkẹyìn fi tube guide ṣeto (9).
Kẹkẹ counter
1
* 2 Apejọ nozzle agbedemeji
14
3
Itọsọna Tube
Ṣeto 9
* 1 Itọsọna kẹkẹ beari opin siṣamisi.
Apejọ Awọn ohun elo Itọsọna – laisi Perforation Waya Solder:
Pejọ akọkọ kẹkẹ counter (1) ni ọna kanna bi o ti han lori išaaju iwe (wo (1), (2) ati (3) loju iwe ṣaaju ki o to).
Lẹhinna fi nozzle agbedemeji sii (2) titi ti kola rẹ yoo fi duro si ile naa ki o si di dabaru rẹ.
Pese nozzle ẹnu (3).
Ṣe apejọ kẹkẹ atilẹyin * (4) ati kẹkẹ gbigbe (5) lori ipo ti o baamu ki o mu awọn skru oniwun naa pọ
Níkẹyìn fi tube guide ṣeto (6) ki o si Mu dabaru.
4 atilẹyin
Kẹkẹ * 1
Wili isunki
5
Nozzle ti nwọle
3
Àdéhùn. Nozzle*2
2
* 2 Apejọ nozzle agbedemeji
Kẹkẹ counter
1
* 1 Atilẹyin kẹkẹ beari opin siṣamisi.
Itọsọna Tube Ṣeto
6
15
Ilana Iṣakoso
Awọn ọna Eto atokan
Wiwọle si Akojọ aṣyn akọkọ nipa titẹ, yan “Eto atokan” ati lẹhinna “Ipo”. Yan laarin “tẹsiwaju”, “dawọ duro” ati ipo “eto”.
tinuous Kò
m
Tẹloinadreploraodcepsrsocess FSepeedeeFdreesedtetirnsgettings TTFoeionelrdseTeeolrototapilndasgrepsatrmtoincegetsessrs titiipa SBtaatcikoSwntaastreidottninsgettings CWouirneCtecolrousgngteinrgs iwari
Ede Pada
Tunto
Tesiwaju Ko si
Tin rMelodade ilana
Tesiwaju
SpPeleadce awọn tinah lori awọn jia 5.0mm / s
Atokan paaranmd eptreersss: titiipa
On
TWinireedloiamd eptreorcess
Sẹhin
Siwaju
1.00mm Ko si
Waya clogging deBtaecktiwonard
On
Pada Tẹ ok lati jade
MoTdine gbee si ilana
Tẹsiwaju lati fi tin naa sori awọn ohun elo Ma dawọ ki o tẹ:
Eto
Siwaju
Sẹhin sẹhin
Tẹ ok lati jade
Ti o da lori ipo ti o yan, awọn paramita oriṣiriṣi wa fun iṣeto.
EdMitopdreToegmrapmadjust Ṣatunkọ pTreomgpralmevel ṣeto Ṣeto dSelfeaeupltdperloagyrams
Eto
Pa Iyara
FeedSelrepeapratemmepters titiipa
ContPirnogurHaoimbuesrlsnoaatdMioendodedlaey
Agbeegbe.
Sẹhin
Pada
Wire clogging erin Pada
Ko si
Ṣatunkọ pEdroitgprarmogram
Tot
Tin reElodaitdpprorogcreasms
Pulọọgi wakati ṣiṣẹ wakati
Iyara
Eto atokan Eto Irinṣẹ
Wakati orun
Da duroHiobeur hsrs Ipo
Ko si awọn irinṣẹ wakati
PrograSmtatioMn eto
Awọn iṣiro
Orun cyc
Je cyc
Tin reTloinardeploraodcepsrsocess IfunniFreesedtetirnsgettings
Ipo
Tesiwaju
Iyara
Titiipa awọn paramita atokan DawọOsff
Ohun elo sTeototilnsgettings StatioSntasteiottninsgettings Awọn oludamoranCteorusnter
Wire dídílọ sẹhin sẹhin
Pada
Ko si
Iyara
ProgMraomdeversion
Tesiwaju
MaxSimpeuemd iwọn otutu
5.0mm/s
MiniFmeuemdetrepmarpameters titiipa
On
TWinireedloiamd eptreorcess
1O.0ff0mm
Ohun Bdackward
TLSeetamntgipWotUYhnuoirnuureperintcssdisttelaostatgiotginiinsngisgdbeeBitneagCccuotkipnodtnainteudous
Ko si Lori
BacSkupplied: 12 mm
Ilana igbasilẹ MoTdine ma duro
Iyara Gbe awọn tin lori g2e0a.0rsmm/s
Gigun
ki o si tẹ: 12.0mm
Titiipa awọn paramita atokan
On
Iwọn okun waya
Siwaju 1.00mm
Sẹhin
Ko si sẹhin
Wire clogging erin
On
PrBesasckok lati jade
ModeTemMpoaddejust
Ṣatunkọ pTreomCgproanlmetivneuloseuts
Ṣeto dSelfeaeDupilstdcpoernloatgyinraumouss
FeedSelrepePaproratgemrmaempters titiipa ProgrHaimbesrlnoaatdioend idaduro
WirePdeiraimpheeter.r
Pada
Sẹhin
Pada
Wire clogging erin Pada
Eto Paa
On
1.00mm Ko si Lori
ogram Ko si
WahalaEdsithproogoramting
Ṣatunkọ eto
ModeTin gbee si ilana
Iyara
Eto atokan
Titiipa awọn paramita atokan
Laasigbotitusita ibudo aSvpeaeidlable lori oju-iwe ọja ni wwSwpe.ejbd ctools.com Eto Irinṣẹ
Ṣe o fẹ imudojuiwọn famuwia bi?
16
BackwSatardtion eto Waya cCloougngitnegrsdetection
Pada
Tesiwaju Paa
Ko si
Tin gbee si ilana
Ipo
Kokoro
ConTtiinuroeulosad ilana
Tin gbee si ilana
Ipo
Eto atokan
Iyara
Awọn eto Ọpa Ilana Iṣakoso
Awọn paramita atokan titiipa ilana atungbejade Tin
Awọn eto ibudo
Sẹhin
Counters Eto Ipo Wire clogging erin
Pada
Awọn paramita atokan iyara Titiipa ilana igbasilẹ Tin BackNwoanred Wire clogging erin
Pada
Gbe ọpọn naa sori awọn ohun elo ki o tẹ:
Ko si
Siwaju Sẹhin
Gbe awọn tinah lori awọn murasilẹ Tesiwaju
ki o si tẹ:
Ti pari
Eto siwaju
Sẹhin
Pada
Pẹlu ALE CU o le to awọn eto atokan 5 definPreesds ok Sto eexlitect “Ṣatunkọ PPrersos gokrtao emxit” ati wọle si awọn
awọn paramita eto.
Ipo
Tesiwaju Idaduro Eto
MProodgeram
Ṣatunkọ eto
Ṣeto awọn eto aiyipada
ck
Titiipa awọn paramita atokan
Awọn eto ti kojọpọ
BackNwoanred
on
Wire clogging erin
Pada
Eto ProEgdraitmprogram # 1 Gigun
1
2.0
Ṣatunkọ eto
Iyara 2.0
2
5.0
Non3e
1.0
mm
5.0 5.0 mm / s
Ṣatunkọ eto Iyara
Ṣatunkọ eto
Iyara
Eto # 4 Gigun
1
2.0
2
Ko si
Tin gbee si ilana
Eto atokan eto SpToeoedl
S2t.a5tion eto
NCoonuenters
3
Ko si
mm
Ko si mm/s
Tin reload p atokan setti Ọpa eto Station setti Counters
Fun eto kọọkan, laarin awọn igbesẹ ifunni 1 ati 3 (ipari ati iyara) yẹ ki o ṣalaye.
CoMntoindueouTi o ba kere ju awọn igbesẹ titẹ Con3tinfueoues nilo, ṣeto gigun waya ati iyara si “0.0” ati paramita naa
Iyara yoo yipada si “Ko si”.
ck
FeedeOr pffameters titiipa
Paa
on
BWaicrkeNwocalnorQegdginugidcetekctioAn ccesNsonteo Awọn ipo Iṣeto atokan
Awọn iye pinpin okun waya sBaocklder le jẹ ṣeto taara lati iboju iṣẹ.
Tẹ
or
lati yi iye iwọn otutu ọpa pada.
Nigbati iboju akọkọ ba han, iyara ati awọn iye gigun le ṣeto nipasẹ titẹ
Awọn paramita wọnyi le yipada ni ibamu si awọn ipo ipinfunni oriṣiriṣi:
Nmu imudojuiwọn
eing imudojuiwọn Tesiwaju
RẹCstatoionns itibneiungCouopnudtaisteudoMusode: Iyara
- Ipo idaduro: Iyara ati ipari
Pese: 12 mm – PrograSumppliMed: o12dmem: Awọn orisii paramita ifunni 3 (ipari ati iyara) fun gbogbo eto.
Akiyesi: Ni akọkọ yan eto lati yipada ni iboju iṣẹ nipa lilo ati
laarin awọn eto.
. Awọn lati yipada
ati firmwDaorey?o fẹ lati ṣe imudojuiwọn famuwia?
Nọmba eto #
17
Ilana Iṣakoso
Iboju Akojọ aṣyn
Tin Atunse ilana
Tin relDoadepfroaceusslt PIN: 0105
Eto atokan
Irinṣẹ Eto Ibusọ Eto Awọn counter
Akojọ aṣyn akọkọ
Tin gbee si ilana atokan eto
Awọn eto irinṣẹ
Awọn eto ibudo
Awọn iṣiro
Iyara Ipo
Tesiwaju
Awọn paramita atokan titiipa ilana atungbejade Tin
Sẹhin
Ipo
Waya clogging deteSptieoend
Ko si
Titiipa awọn paramita BaFcekeder
Tin gbee si ilana
Sẹhin
Wire clogging erin
Tesiwaju Ko si
Ilana atungbejade Tin Gbe tin naa sori awọn jia ki o tẹ:
Siwaju Tin gbee si ilana
Sẹhin Gbe ọpọn naa sori awọn jia ki o tẹ:
Tẹ ok lati jade siwaju
Sẹhin
Ipo
Conti Disiko Progr
Ipo Ṣatunkọ eto
Atunto ede
Eto
Ṣatunkọ eto
Pada
Ṣatunkọ eto
Eto atokan Tẹ ok lati jade
Tin reloa atokan s
Ṣeto awọn eto aiyipada
Titiipa awọn paramita atokan
Awọn eto ti kojọpọ Ipo
Ṣatunkọ eto
Sihin Waya clogging
deteScetitodnefault
etoNamonse
Titiipa awọn paramita BaFcekeder
Awọn eto ti kojọpọ
Tin reload ilana atokan Eto Eto Ọpa eto
Ibusọ eto Counters
Iyara Ṣatunkọ eto
Iyara
Ipo
Iyara Tesiwaju
Iyara
5.0mm/s
Atokan paramitaEsdliotcpkrogram
On
TinTWrienilroreaddloiapamrdoepctereosrcsess
1.00mm
FeeBdaecrksweattridngs
Ko si
TooWl sieretticnlgosgging erin
On
Awọn eto ibudo Pada
Iyara
ToToilnsreetlti Ibusọ s
Atako
Ti pari
Ipo
Sẹhin Tesiwaju
Iyara
Wire clogging erin
Titiipa awọn paramita atokan
BaOckff
Ko si Ipo
Eto
Counters Edit eto
Ṣatunkọ pr
Awọn iṣiro PBWraoicrgkerwacmalorgdvgeirnsgiodneteSMcptoieoded
Ko si
MaximOuffm
iwọn otutu
BaFcekeder
paramita Plug
wakati titiipa
Tesiwaju Edit eto
Ṣeto awọn eto aiyipada
Paa
Apakan
FMeeoddeeTropt arameters PSrpoegerda2m8s kojọpọ
titiipa
Ti pari
Iwọn otutu to kere julọ
Ipo
Sẹhin
Ṣiṣẹ wakati SleOepffhrs
SouCnodntinuous Waya clogging dHeibteecrtihorns
TemDpiscuonnittsinuous
NoBatockols wakati
Ko si
0 Ipari6 0 BFeacekdwera0rpdarameters titiipa
1 Waya c2lo0gging erin
1 sẹhin2rd
Pada
aaki
LenPgrtohguranmits
Orun cyc
20 Waya c2lo4gging erin
Ko si Ko si
Ibudo tunto
Je cyc
Pada
UpdatiBnacBgkack
Je mm
Awọn ibudo rẹ ti ni imudojuiwọn
19 181 Co1n1t8inMuoo2ud2se786
Pada Tesiwaju Tesiwaju
* pCaonrttiinauloaus ati lapapọ kikaSeurpspliaedrSe: p0esmehdmown
Pese: 0 mm
Titiipa awọn paramita atokan
Paa
Awọn Eto Irinṣẹ
Iṣatunṣe iwọn otutu ṣeto ipele oorun Idaduro oorun iwọn otutu Hibernation Idaduro Agbeegbe.
Pada
Iyara 0ºC Pipa
0 iṣẹju 150ºC 10 iṣẹju
Ti pari
Ti pari
Pulọọgi h
Worki Sleep Hiber Ko si too orun je cy
Pese: 12 mm
Tin gbee si ilana
Ede imudojuiwọn
Awọn ibudo rẹ ti wa ni imudojuiwọn Tesiwaju
English
Eto atokan Eto Irinṣẹ
Deutsch EspañoSlupplied: 12 mm
Awọn eto ibudo Ṣe o fẹ imudojuiwọn
Français famuwia?Italiano
Awọn iṣiro
Português
P
Ṣe o fẹ imudojuiwọn famuwia bi?
Sẹhin
Wire clogging erin
English Deusch
Pada
Español
Ko si
Ẹya eto iwọn otutu to kere ju
Italiano
Ohun
Awọn iwọn otutu Awọn iwọn gigun
Português
Ibudo tunto
Púdánù
Pada
Awọn ibudo rẹ ti ni imudojuiwọn
Tesiwaju
Awọn Eto Ibusọ
Ẹya eto iwọn otutu to kere ju
PIN Pa ohun otutu sipo Gigun sipo Ibusọ tun
Pada
8M88o6d7e32
DisconMtinoudoe
S4p0e0eºdC
Iyara
Titiipa awọn paramita Le2n0g0tºhC FeedOeffr
Ifunni gigun
On
Backwº Kaadi mm
Wire clogging erin
Backown Waya
Pada
* yan laarin mm ati inches
Pese: 12 mm
18
Awọn ẹya ẹrọ
Awọn ohun elo Itọsọna GALE fun ALE250
Awọn itọkasi fun Awọn ohun elo Itọsọna GALE laisi Perforation Waya Solder
Solder Waya Ø ibiti o ti lo
Itọsọna Apo Ref.
Itọsọna Ṣeto Ref.
Iho iṣan
Ref.
Nozzle Ref.
Wili isunki Ref.
Kẹkẹ atilẹyin
Ref.
Nozzle ti nwọle
Ref.
Àdéhùn. Nozzle
Ref.
Kẹkẹ counter
Ref.
Skru Ref.
Asapo Stud Ref.
Nozzle Dimu
Orisun omi Ref.
0.38 – 0.40 mm 0.015 – 0.016 ni 0.46 – 0.56 mm 0.018 – 0.022 ni 0.60 – 0.64 mm 0.023 – 0.025 ni 0.70 – 0.78 mm 0.028 – 0.031 – 0.80 mm 0.82 – 0.032 ninu 0.033 – 0.90 mm 1.10 – 0.036 ni 0.044 – 1.14 mm 1.27 – 0.045 ni 0.051 – 1.50 mm 1.57 – 0.060 ni 0.063 – 1.60 ni 1.63 – 0.063 ni 0.065 – XNUMX
1.80 mm 0.073 ni
GALE04D-A GALE05D-A GALE06D-A GALE07D-A GALE08D-A GALE10D-A
0032405 0028358 0028491 0028492 0028359 0028360
0032512 0025268 0022994 0025289 0025270 0021560
0021158
0019479
0020345 0019519
0019480
0019520
0018632 0019170
0024954
0025293 0025291 0024955 0024956
0026693
0026695 (x2)
0026696 (x3)
0030549
GALE12D-A 0028361 0025272 GALE15D-A 0028362 0025274 GALE16D-A 0028363 0025276 GALE18D-A 0028493 0021559
0019481
0009171
0024957 0024958
0028367
0024233 0024234
0024959 0024960
26694
Awọn itọkasi fun Awọn ohun elo Itọsọna GALE pẹlu Perforation Waya Solder
Itọsọna Apo Ref.
Solder Waya Ø ibiti o ti lo
Itọsọna Ṣeto Ref.
Iho iṣan
Ref.
Nozzle Ref.
Wheel Guide
Ref.
Blade Ref.
Blade Clamp
Ref.
Nozzle ti nwọle
Ref.
Àdéhùn. Nozzle
Ref.
Kẹkẹ counter
Ref.
Skru Ref.
Asapo Stud Ref.
Nozzle Dimu
Orisun omi Ref.
0.8 mm 0.032 ni 1.0 mm 0.040 ni 1.2 mm 0.047 ninu 1.5 mm 0.059 ni 1.6 mm 0.063 ninu
GALE08V-A 0028359 0025270 GALE10V-A 0028360 0021560 GALE12V-A 0028361 0025272 GALE15V-A 0028362 0025274
0021158
0021696 0021699 0023738 0019696
0021555
0018638
0018632 0019170
0019171
0024955 0024956 0024957 0024958
0026693 (A ti pese pẹlu ALE)
0026694
0026695 (x2)
0026696 (x3)
0030549
GALE16V-A 0028363 0025276
0025922
0024233 0024959
19
Itoju
Ṣaaju ki o to ṣe itọju, nigbagbogbo pa ẹrọ naa kuro ki o ge asopọ rẹ lati awọn mains. Gba ohun elo laaye lati tutu.
- Nu ifihan ibudo mọ pẹlu ẹrọ mimọ gilasi tabi ipolowoamp asọ.
– Lo ipolowoamp asọ lati nu casing ati awọn ọpa. Oti le ṣee lo nikan lati nu awọn ẹya irin.
- Lokọọkan ṣayẹwo pe awọn ẹya irin ti ọpa ati iduro jẹ mimọ ki ibudo le rii ipo ọpa naa.
– Bojuto awọn sample dada mọ ki o si tinned saju si ipamọ ibere lati yago fun sample ifoyina. Rusty ati idọti roboto din ooru gbigbe si awọn solder isẹpo.
- Lorekore ṣayẹwo gbogbo awọn kebulu ati awọn tubes.
- Rọpo eyikeyi abawọn tabi awọn ege ti o bajẹ. Lo atilẹba atilẹba awọn ẹya ara apoju JBC.
- Awọn atunṣe yẹ ki o ṣe nipasẹ iṣẹ imọ-ẹrọ JBC ti a fun ni aṣẹ nikan.
Mọ lorekore
Mọ lorekore
Mọ lorekore
AYE
– FUSE Nigbati ikilọ yii ba han loju iboju akọkọ, fiusi ilẹ gbọdọ rọpo.
- Rọpo fiusi ti o fẹ bi atẹle (kan si mejeeji fiusi ilẹ ati fiusi akọkọ):
1. Fa si pa awọn fiusi dimu ki o si yọ awọn fiusi. Ti o ba jẹ dandan, lo ohun elo kan lati mu u kuro.
2. Fi titun fiusi sinu fiusi dimu ati ki o pada si awọn ibudo.
Fiusi dimu
Earthing fiusi
LO NIKAN FI FUSE 250 V
FUSE AYE F1.25 A
20
Fiusi akọkọ (labẹ apakan iṣakoso) Dimu Fuse
Aabo
O jẹ dandan lati tẹle awọn itọsona ailewu lati ṣe idiwọ mọnamọna, ipalara, ina tabi bugbamu. – Ma ṣe lo awọn sipo fun eyikeyi idi miiran ju soldering tabi rework. Lilo ti ko tọ le fa ina. - Okun agbara gbọdọ wa ni edidi sinu awọn ipilẹ ti a fọwọsi. Rii daju pe o wa ni ilẹ daradara ṣaaju lilo. Nigbati o ba yọ kuro, di plug naa, kii ṣe okun waya. – Maa ko sise lori itanna ifiwe awọn ẹya ara. - Ọpa yẹ ki o gbe sinu imurasilẹ nigbati ko si ni lilo lati mu ipo oorun ṣiṣẹ. Italolobo tita tabi nozzle, apakan irin ti ọpa ati iduro le tun gbona paapaa nigbati ibudo naa ba wa ni pipa. Mu pẹlu iṣọra, pẹlu nigba titunṣe ipo iduro. – Maṣe fi ohun elo naa silẹ laini abojuto nigbati o wa ni titan. – Maa ko bo fentilesonu grills. Ooru le fa awọn ọja alaiwu lati tan. - Yago fun ṣiṣan wa sinu olubasọrọ pẹlu awọ ara tabi oju lati yago fun ibinu. – Ṣọra pẹlu èéfín ti a ṣe nigba tita. - Jẹ ki ibi iṣẹ rẹ jẹ mimọ ati mimọ. Wọ awọn gilaasi aabo ti o yẹ ati awọn ibọwọ nigba ṣiṣẹ lati yago fun ipalara ti ara ẹni. – Itọju pupọ julọ gbọdọ jẹ pẹlu egbin tin olomi eyiti o le fa awọn gbigbona. Ohun elo yii le ṣee lo nipasẹ awọn ọmọde ti o ju ọdun mẹjọ lọ ati pẹlu awọn eniyan ti o dinku ti ara, imọ-ara tabi awọn agbara ọpọlọ tabi aini iriri ti a pese pe wọn ti fun wọn ni abojuto to pe tabi itọnisọna nipa lilo ohun elo naa ati loye awọn ewu ti o kan. Awọn ọmọde ko gbọdọ ṣere pẹlu ohun elo naa. - Itọju ko gbọdọ ṣe nipasẹ awọn ọmọde ayafi ti abojuto.
21
Awọn pato
ALE laifọwọyi-kikọ sii Soldering Iṣakoso Unit
Pẹlu Solder Waya Perforation
fun waya ø 0.8mm: Ref. ALE-908UVA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-108UVA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-208UVA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya ø 1.0mm: Ref. ALE-910UVA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-110UVA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-210UVA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya ø 1.2mm: Ref. ALE-912UVA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-112UVA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-212UVA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 1.5 mm: Ref. ALE-915UVA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-115UVA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-215UVA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 1.6 mm: Ref. ALE-916UVA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-116UVA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-216UVA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
Laisi Solder Waya Perforation
fun waya Ø 0.38 - 0.4 mm: Ref. ALE-904UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-104UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-204UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 0.45 - 0.56 mm: Ref. ALE-905UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-105UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-205UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 0.60 - 0.64 mm: Ref. ALE-906UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-106UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-206UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 0.70 - 0.78 mm: Ref. ALE-907UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-107UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-207UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
22
Awọn pato
Laisi Solder Waya Perforation
fun waya Ø 0.80 - 0.82 mm: Ref. ALE-908UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-108UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-208UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya ø 0.90 - 1.10 mm: Ref. ALE-910UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-110UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-210UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 1.14 - 1.27 mm: Ref. ALE-912UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-112UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-212UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 1.50 - 1.57 mm: Ref. ALE-915UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-115UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-215UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 1.60 - 1.63 mm: Ref. ALE-916UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-116UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-216UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
fun waya Ø 1.80 mm: Ref. ALE-918UA - 100V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-118UA - 120V 50/60Hz. Fiusi igbewọle: T2A. Fiusi ilẹ: F 1.25A. Abajade: 23.5V Ref. ALE-218UA - 230V 50/60Hz. Fiusi igbewọle: T1A. Fiusi ilẹ: F 1.25A. Ijade: 23.5V
– Agbara ipin: – Agbara tente oke (Ọpa): – Selectabe otutu: – Laisi iwọn otutu. Iduroṣinṣin (si tun air): – Temp. Yiye: – Temp. Atunṣe: - Awọn asopọ:
– Equipontencial imora: – Italolobo si Ilẹ Voltage/Atako:
– Solder Waya opin: – Max. Ipari Waya: – Min. Gigun Waya: – Ibiti Iyara Siwaju – Iyara Iṣẹ Afẹyinti
180 W 150 W 90 - 450 °C / 190 - 840 °F ± 1.5ºC / ± 3ºF (Pade o si kọja IPC J-STD-001) ± 3% (Lilo katiriji itọkasi) ± 50ºC / ± 90ºF (Nipasẹ akojọ aṣayan ibudo) files agbewọle-okeere USB-B Software PC RJ12 Fume Extractor asopọ Iyan asopọ si EPA <2 mV RMS / <2 ohms Pàdé ati koja ANSI/ESD S20.20-2014 / IPC J-STD-001F Ni ibamu si awọn ti ra itọkasi 250 mm / 9.84 ni (fun mm discontinus / 0.5 + eto) 0.02. 0.5 mm/s / 50 si 0.02 ni/s 1.97 si 0.0 mm/s / 5.0 si 0.5 in/s
Awọn alaye diẹ sii ni oju-iwe ti o tẹle.
23
Awọn pato
Nọmba Awọn eto: – Nọmba Awọn Igbesẹ Eto: – Awọn iwọn Ẹka Iṣakoso:
(L x W x H)
- Apapọ iwuwo Net:
- Iwọn idii / iwuwo: (L x W x H)
Ibamu Solder Reel: – Reel iwuwo: – Max. Reel opin: – Max. Giga Reel:
Ni ibamu pẹlu awọn iṣedede CE. ESD ailewu.
5 Awọn eto 1 si 3 Igbesẹ (fun eto kọọkan) 235 x 145 x 150 mm 9.25 x 5.71 x 5.91 ni
5.81 kg / 12.81 lb
368 x 368 x 195 mm / 6.72 Kg 14.49 x 14.49 x 7.68 ni / 14.82 lb
Titi di 2 kg / 4.41 lb 100 mm / 3.94 ni 100 mm / 3.94 ni
Atilẹyin ọja JBC's 2 ọdun ni wiwa ohun elo yii lodi si gbogbo awọn abawọn iṣelọpọ, pẹlu rirọpo awọn ẹya alebu ati iṣẹ. Atilẹyin ọja ko bo ọja yiya tabi ilokulo. Ni ibere fun atilẹyin ọja lati wulo, ohun elo gbọdọ wa ni pada, postage san, si awọn onisowo ibi ti o ti ra. Gba atilẹyin ọja afikun ọdun 1 JBC nipa fiforukọṣilẹ nibi: https://www.jbctools.com/productregistration/ laarin awọn ọjọ 30 ti rira. Ti o ba forukọsilẹ, iwọ yoo gba awọn iwifunni imeeli nipa awọn imudojuiwọn sọfitiwia tuntun fun ọja ti o forukọsilẹ.
Ọja yii ko yẹ ki o ju sinu idoti. Ni ibamu pẹlu awọn European šẹ 2012/19/EU, itanna ni opin ti awọn oniwe-aye gbọdọ wa ni gbigba ati ki o pada si ohun aṣẹ atunlo apo.
0030217-081124
Awọn iwe aṣẹ / Awọn orisun
 |
JBC ALE-908UVA Aifọwọyi Ifunni Soldering Iṣakoso Unit [pdf] Ilana itọnisọna ALE-908UVA, ALE-108UVA, ALE-208UVA, ALE-915UVA, ALE-115UVA, ALE-215UVA, ALE-910UVA, ALE-110UVA, ALE-210UVA, ALE-916ALEUVA, ALE-116UVA-216 Ẹka Iṣakoso Ifunni Ifunni Aifọwọyi, ALE-908UVA, Ẹka Iṣakoso Ifunni Ifunni Aifọwọyi, Ẹka Iṣakoso Tita Ifunni, Ẹka Iṣakoso Tita, Ẹka Iṣakoso, Ẹka |
