ALE-908UVA Tsis Siv Neeg Pub Soldering Control Unit

“

Specifications:

• Qauv: ALE Tsis Siv Neeg-Feed Soldering Control Unit
• Muaj Variants: Xa mus rau phau ntawv qhia tshwj xeeb
  cov ntaub ntawv
• Lub hwj chim xaiv: 100V, 120V, 230V

Product Information:

ALE Automatic-Feed Soldering Control Unit yog ntau yam
cov cuab yeej soldering tsim los rau kev ua haujlwm zoo thiab meej.
Nws los nrog ntau yam nta thiab cov khoom siv los txhim kho kev sib tw
kev ua tau zoo.

Cov lus qhia siv khoom:

Packing List:

• Tsis Siv Neeg- Pub Soldering Control Unit - 1 units
• Fais fab qaum - 1 units
• Phau Ntawv - 1 chav tsev
• Ntsiab teeb rau SF / AL - 1 units
• Solder Wire Guide Kit - 1 units

Nta thiab kev sib txuas:

ALE Automatic-Feed Soldering Control Unit suav nrog
nram qab no nta:

• Solder Reel Stand
• Zaub
• USB-A Connector
• Main Hloov
• SOLDER WIRE GUIDE Kit
• Solder Hlau Inlet
• Allen Key thiab Spanner Cia
• Ntiaj teb Fuse
• Equipotential Connector Power Socket thiab Main Fuse
• Peripherals Connector RJ12 Connector rau FAE thiab Robot
  Qhov system
• ALES sawv ntsug rau ALE250 Tsis Siv Neeg-Pib Soldering Hlau
• Pedal Connector USB-B Connector

Cartridge Assembly:

Rau cartridge sib dhos / hloov:

1. Xyuas kom lub cuab yeej yog unplugged thiab txias.
2. Loos lub cartridge teeb ntsia hlau, tshem tawm cov cartridge siv, thiab
   ntxig lub cartridge tshiab mus txog nws lub cim.
3. Kho lub taub hau ntawm daim cartridge thiab tuav lub cartridge kom nruj
   teem ntsia hlau.

FAQ:

Q: Qhov twg kuv tuaj yeem nrhiav cov lus qhia rau cov hlau sib txawv
txoj kab uas hla?

A: Daim ntawv qhia cov kab sib txawv muaj nyob ntawm: www.jbctools.com/solder-wire-guide-kit-product-2098.html

“`

QHIA MANUAL
ALE
Automatic-Feed Soldering Control Unit

Phau ntawv no suav nrog cov ntaub ntawv hauv qab no:

Nrog Solder Hlau Perforation:
rau hlau ø 0.8 mm
ALE-908UVA (100V) ALE-108UVA (120V) ALE-208UVA (230V)
rau hlau ø 1.5 mm
ALE-915UVA (100V) ALE-115UVA (120V) ALE-215UVA (230V)

rau hlau ø 1.0 mm
ALE-910UVA (100V) ALE-110UVA (120V) ALE-210UVA (230V)
rau hlau ø 1.6 mm
ALE-916UVA (100V) ALE-116UVA (120V) ALE-216UVA (230V)

Tsis Siv Neeg Hlau Perforation:
rau hlau ø 0.38 - 0.4 mm
ALE-904UA (100V) ALE-104UA (120V) ALE-204UA (230V)
rau hlau ø 0.70 - 0.78 mm
ALE-907UA (100V) ALE-107UA (120V) ALE-207UA (230V)
rau hlau ø 1.14 - 1.27 mm
ALE-912UA (100V) ALE-112UA (120V) ALE-212UA (230V)
rau hlau ø 1.80 mm
ALE-918UA (100V) ALE-118UA (120V) ALE-218UA (230V)

rau hlau ø 0.45 - 0.56 mm
ALE-905UA (100V) ALE-105UA (120V) ALE-205UA (230V)
rau hlau ø 0.80 - 0.82 mm
ALE-908UA (100V) ALE-108UA (120V) ALE-208UA (230V)
rau hlau ø 1.50 - 1.57 mm
ALE-915UA (100V) ALE-115UA (120V) ALE-215UA (230V)

rau hlau ø 1.2 hli ALE-912UVA (100 V) ALE-112UVA (120 V) ALE-212UVA (230 V)
rau hlau ø 0.60 - 0.64 mm ALE-906UA (100 V) ALE-106UA (120 V) ALE-206UA (230 V)
rau hlau ø 0.90 - 1.10 mm ALE-910UA (100 V) ALE-110UA (120 V) ALE-210UA (230 V)
rau hlau ø 1.60 - 1.63 mm ALE-916UA (100 V) ALE-116UA (120 V) ALE-216UA (230 V)

Lus Cim: Rau kev ua haujlwm kom raug, txoj kab uas hla ntawm cov hlau siv hauv kev siv yuav tsum ua raws li txoj kab uas hla ntawm ALE siv yuav.

2

Daim ntawv teev npe
Cov khoom hauv qab no suav nrog hauv txhua qhov kev siv:

Automatic-Feed Soldering Control Unit ………………. 1 unit

Fais fab Cord ……………….. 1 unit Ref. 0023717 (120V)
0024080 hli (230V)

Phau ntawv …………………………. 1 unit Ref. 0030217 ib

Ntsiab Teeb * rau SF / AL …………………. 1 unit Ref. 0019341 ib
suav nrog:

Spanner …………………………. 1 unit Allen Key ø 1.5 ………… 1 unit Allen Key ø 2.5 ………… 1 unit * twb tau sib sau ua ke hauv ALE Control Unit

3

Daim ntawv teev npe
Ib qho ntawm cov khoom hauv qab no suav nrog raws li kev yuav khoom siv:

Cheebtsam twb sib sau ua ke hauv Control Unit

Cheebtsam twb sib sau ua ke hauv Control Unit

Solder Wire Guide Kit ………………………………………………………………………………………………………… 1 unit

Nrog solder hlau perforation:

Tsis muaj solder hlau perforation:

rau hlau ø 0.8 mm / ø 0.032 in

rau hlau ø 0.38 - 0.4 mm / ø 0.015 - 0.016 nyob rau hauv

-Ref. GALE08V-A

-Ref. GALE04D-A UA

rau hlau ø 1.0 mm / ø 0.040 in

rau hlau ø 0.46 - 0.56 mm / ø 0.018 - 0.022 nyob rau hauv

-Ref. GALE10V-A

-Ref. GALE05D-A UA

rau hlau ø 1.2 mm / ø 0.047 in

rau hlau ø 0.80 - 0.82 mm / ø 0.032 - 0.033 nyob rau hauv

-Ref. GALE12V-A

-Ref. GALE08D-A UA

rau hlau ø 1.6 mm / ø 0.063 in

rau hlau ø 0.90 - 1.10 mm / ø 0.036 - 0.044 nyob rau hauv

-Ref. GALE16V-A

-Ref. GALE10D-A UA

Lus Cim: Rau kev ua haujlwm kom raug, txoj kab uas hla ntawm cov hlau siv hauv kev siv yuav tsum sib phim lub cheeb ntawm cov khoom siv qhia.
Daim ntawv qhia cov kab sib txawv muaj nyob ntawm: www.jbctools.com/solder-wire-guide-kit-product-2098.html

4

Nta thiab kev sib txuas
Solder Reel Stand
Zaub
USB-A Connector
Main Hloov

ALE250 Tsis Siv Neeg Pub Soldering Hlau *
ALE Automatic-Feed Soldering Control Unit
SOLDER WIRE GUIDE
Cov khoom siv rau ALE250 muaj rau
sib txawv solder hlau diameters saib nplooj 11 + 12

Solder Hlau Inlet
Allen Key thiab Spanner Cia
Ntiaj teb Fuse
Equipotential Connector Power Socket thiab Main Fuse

hauv qab no

Peripherals Connector RJ12 Connector rau FAE thiab Robot System
ALES sawv ntsug rau ALE250 Tsis Siv Neeg Pub
Soldering Hlau *
Pedal Connector USB-B Connector
* tsis suav nrog
5

Cartridge Assembly

Txhawm rau kom muaj kev ruaj ntseg cartridge sib dhos / hloov pauv, xyuas kom meej tias lub cuab yeej tsis tau ntsaws thiab txhua lub cartridge nyob rau hauv qhov chaw tau txias ua ntej ua raws li cov lus qhia no:

Loos lub cartridge teeb ntsia hlau (1), tshem tawm cov cartridge siv yog tias muaj ib qho twb nyob rau hauv qhov chaw, thiab ntxig lub cartridge tshiab mus rau nws cov cim (2).
Ib qho tseem ceeb: Nws yog ib qho tseem ceeb uas yuav tsum tau ntxig lub cartridge tag rau kev sib txuas zoo. Siv lub cim raws li siv (3).
Kho cov lus taw qhia ntawm daim cartridge (4) thiab zawm lub cartridge teeb ntsia hlau (1).

ALE250 Nws pib-Feed Soldering Hlau

1

Mark 3

2

Cartridge Teeb Screw

Qhia Nozzle

Guide Tube Set Assembly

Qhib cov ntawv qhia lub raj teeb ntsia hlau (1) thiab ntxig rau cov ntawv qhia raj teeb.

Kho qhov ntev ntawm lub raj (2). Cia qhov sib txawv ntawm 5 mus rau 7 hli (0.19 txog 0.27 nyob rau hauv) ntawm lub ntsis thiab lub qhov hluav taws xob nozzle (3). Thaum txoj hauj lwm raug kho kom nruj cov kev taw qhia raj teeb ntsia hlau (1).
Rau kev tuav tau zoo dua siv cov clips (4) txhawm rau txuas cov raj coj mus rau lub cuab yeej cable.

Qhia Tube Teeb Screw

2
5-7mm 0.19-0.27 nyob rau hauv
3

1
Qhia Tube Teeb

4 Clips
6

Qhov hluav taws xob Nozzle Hloov
Flux tuaj yeem ua rau txhaws ntawm lub qhov hluav taws xob lub qhov hluav taws xob ntawm cov txheej txheem qhia lub raj thiab nws tuaj yeem tsim nyog los hloov cov hnav lossis txhaws qhov hluav taws xob nozzle. Lus Cim: Nws muaj qhov loj me me rau txhua txoj kab uas hla. Kev siv lub nozzle yog tsim nyog raws li nws txoj kab uas hla yog hloov mus rau lub solder hlau txoj kab uas hla thiab coj cov hlau nrog precision ntau dua. Txhawm rau hloov lub qhov hluav taws xob lub qhov hluav taws xob, ua raws li cov kauj ruam no: Ua ntej, xyuas kom meej tias lub cuab yeej tau txias thiab tshem tawm cov hlau txuas ntxiv uas tseem yuav nyob hauv cov raj coj mus (saib nplooj 11 thiab 12). Unplug lub cuab tam. Loosen lub hau qhia raj teeb ntsia hlau (1) thiab tshem tawm cov ntawv qhia raj teeb los ntawm lub cuab yeej kom yooj yim tuav.
1
Qhia Tube Teeb Unscrew lub caij nplooj ntoos hlav sab hauv (2), tom qab lub caij nplooj ntoos hlav downward.
2
Thaum lub qhov hluav taws xob lub qhov hluav taws xob tawm ntawm lub caij nplooj ntoos hlav, rub lub qhov hluav taws xob nozzle tawm (3) thiab tom qab ntawd tshem lub caij nplooj ntoos hlav (4).
3
4
Muab lub qhov hluav taws xob tshiab tso rau ntawm qhov taw qhia raj teeb (5).
5
Thaum lub qhov hluav taws xob lub qhov hluav taws xob tau teeb tsa, ntsia hlau lub caij nplooj ntoos hlav rau nws txhawm rau txhim kho lub qhov hluav taws xob lub qhov hluav taws xob mus rau ntawm txoj hlua qhia (6).
6
7

Tsis tu ncua

Counters Reset

Nruam Supplied: 12 mm

Rov qab
Tsis tu ncua

Txuas ntxiv ib Back
Khoom siv: 12mm

Cov cuab yeej nqis Counters

BackCwonartidnuous Supplied: 12 hli
Nias ok rau eCxitontinuous

BacFkraCnoçntainisuous ItSaulpipalinedo: 12 mm

Khoom siv: 12mm

Hom

Program

Khoom siv: E1d2it pmrogmram

Rov pib dua

Kho qhov program

Tool Assembly Teeb cov kev pab cuam

Feeder parameters xauv

Tawm

Ceev

Cov kev pab cuam loaded Tin reload txheej txheem

Tsis tu ncua

Tsis tu ncua

Txuas lub cuab yeej Hlau txoj kab uas hla mus rau chav tswj raws li cov kauj ruam no:

Rov qab

Khoom siv: 12mm

Khoom siv: 12mm

Rov qab

Kho qhov program

Khoom siv: 12mm
Ceev Nruam Supplied: 12 mm

Chaw nres tsheb chaw Feeder settings Tool settings Counters Reset

Português P
Nruam Supplied: 12 mm

Loos lub teeb ntsia hlau, ntxig thiab thawb lub nozzle kom txog thaum nws nres (1) thiab nruj nreem ntsia hlau (2)

dua. TheMonde ntsaws rau hauv thCeontintuoouos l connector (3).

Ceev

5.0mm / s

Feeder parameters xauv

Tawm

Tin reload txheej txheem

Hlau txoj kab uas hla rov qab

ContinuouNs ib

Ntsia hlau

Back Supplied: 12 hli

2

Hloov kho
Koj cov chaw nres tsheb tau hloov kho tas mus li
1
Khoom siv: 12mm

3

Koj puas xav hloov kho firmware?

Ntxig txhua txoj hauv kev kom txog thaum nws nres

Solder Reel Assembly
Reel Xauv
Reel Locking Ntsia Hlau
Solder Hlau Kev taw qhia

2 Axis
1
Solder Reel 3

Solder Hlau
Loosen lub reel locking ntsia hlau (1) thiab tshem tawm cov reel locking (2) ntawm lub axis. Sib sau cov hlua khi rau ntawm axis (3). 8

Sib sau ua ke lub solder reel nyob rau hauv xws li ib txoj kev - thaum twg viewed los ntawm saum toj no - tias cov hlau solder unwinds ntawm lub dispensing mechanism sab (4). Tom qab ntawd hla cov hlau nplaum los ntawm kev taw qhia hlau (5).

5

Solder Hlau

Solder Hlau Kev taw qhia

4 Solder Hlau Unwinding Direction

Reel Locking Assembly

Lub Plawv Sab

4

Reel Xauv

3

5

Rov qab

Xauv Ntsia Hlau

Yuav kom sib sau cov reel locking, nws conical sab (1) yuav tsum tau taw tes
Reel downwards. Xauv

Pav Sab
2 ntawm Axis

Reel Locking Sab saum toj View

Flat Side (Reel Locking)
3

1
Conical Sab

Teem lub tiaj tiaj ntawm lub axis (2) nrog rau sab hauv tiaj tiaj (ib qho nrog lub hau) ntawm lub kaw lus kaw (3) thiab rov sib dhos rau axis (4).
Lus Cim: Txhawm rau tiv thaiv cov hlua khi los ntawm kev sib tw ywj pheej lossis khi, ua ntej zawm lub hau xauv cov ntsia hlau maj mam nias lub khawm kaw, tab sis tsuas yog txaus kom tso cai rau cov hlua khi kom tig tau ywj pheej, ua ntej zawm lub hau xauv lub hau (5).
9

Lub Vev Xaib tseem ceeb

Hom Kho kom raug qhov kev pab cuam Teem cov kev pab cuam default Feeder tsis xauv Cov Kev Pabcuam loaded

Program

Nkag mus rau Main Menu los ntawm nias, xaiv "Feeder settings" (1) aBnacdkwtahrden "Wire diameterN"o(n2e) rau

kho tus nqi rau tam sim no solder hlau txoj kab uas hla.

Hlau clogging detection

Rov qab

Tin reload txheej txheem

1

Feeder nqis

Cov cuab yeej nqis

Chaw nres tsheb chaw

Cov txee

Lus

Rov pib dua

Hom Ceev Feeder tsis muaj xauv

Nruam 5.0mm / s Tawm

2

Hlau txoj kab uas hla

1.00 hli

Rov qab

Tsis muaj

Hlau clogging detection

On

Rov qab

nyob tsis tau

Solder WTeimrpeadjuLstoading

Temp theem

Tawm

Hla tus muagSelerepwdierleay dhau ntawm cov kev taw qhia hlau

thiab qhiaSltehepetsemoplder hlau rau hauv lub inlet nozzle

(1) mus txog rau Hhibeesrnatthioen dwelhayeels (2).

Peripher.

Rov qab

Xaiv "Tin reload txheej txheem" ​​thiab tom qab ntawd siv los pub cov hlau nplaum thiab ua ntej kom txog thaum nws tawm ntawm lub qhov hluav taws xob nozzle.
Yog tias xav tau, ua tib zoo thawb cov hlau kom txog thaum nws tau muab xauv rau hauv nruab nrab ntawm lub log tig kom cov hlau pib txav mus tom ntej. Cia nias thiab tom qab ib ntus, cov hlau yuav nce nrawm dua.

Lub log
Plug teev
Ua hauj lwm teev Pw tsaug zog teev Hiber teev Tsis muaj cuab yeej teev Pw tsaug zog cyc Fed cyc

Hlau Tot Kev Qhia

Hloov kho

Koj cov chaw nres tsheb tau hloov kho tshiab

2

Tsis tu ncua

1 Supplied: 12 hli

Inlet Nozzle

Tin reload txheej txheem Feeder nqis DToooylosuetwtinagnst hloov firmware? Chaw nres tsheb chaw Counters Language
Rov pib dua

Xyuas kom tseeb tias cov hlau hla dhau ntawm qhov nruab nrab nozzle (3) thiab nkag mus rau hauv txoj hlua qhia (4).
10

Hom Kho kom raug qhov kev pab cuam Teem cov kev pab cuam default Feeder tsis xauv Cov Kev Pabcuam loaded

Program

4

Qhia Tube

BWaIicnrketwecNalromrogdzgezindlegiadteetec3tion

Rov qab

WireNone

Hom

Tsis tu ncua

Solder Hlau Pub
Txuas mus rau lub solder hlau los ntawm nias lub khawm rub (1) kom txog thaum cov hlau tawm ntawm lub ntsis (2). Solder Hlau Dragging Khawm 1

2
Xwb, solder hlau kuj tuaj yeem pub siv lub pedal P405. Lub pedal yuav tsum tau ntsaws rau hauv qab ntawm lub feeder tswj chav nyob rau hauv lub pedal connector.

Solder Hlau Unloading

Nrog Solder Hlau Perforation

Txhawm rau tshem tawm cov xaim hlau nrog perforation uas twb dhau los ntawm txoj kev qhia lub raj, txiav cov xaim ntawm cov kev taw qhia xaim thiab cov inlet nozzle (1).

Txhawm rau rho tawm cov xaim tawm ntawm lub raj, tuav lub cuab yeej ntawm koj txhais tes thiab nias mus rau pem hauv ntej.

mus txog thaum lub xaim nres

Muab cov hlau los ntawm lub qhov hluav taws xob nozzle nrog cov pliers thiab rub los ntawm nws kom txog thaum nws tawm tag nrho.

Hlau Kev taw qhia

1 Inlet Nozzle

11

Solder Hlau Unloading

Tsis Siv Neeg Hlau Perforation

Thaum siv cov khoom siv uas tsis muaj vuam hlau perforation, nias

mus txog rau thaum lub hlau yog kiag li raug mob rau

unload lub solder hlau. Nws yog qhov zoo tshaj plaws los tig lub reel los ntawm txhais tes raws li cov hlau raug rub rov qab rau hauv kev txiav txim

kom nws zoo zoo nyob rau hauv lub reel.

Los yog, Yog xav tau, ua raws li tau piav qhia ua ntej rau perforated solder hlau unloading.

Hlau Winding Direction

Solder Reel

Solder Hlau

12

Qhia Cov Khoom Siv Disassembly
Rau qhov kev ua haujlwm no, disconnect tus ntaus ntawv los ntawm lub mains. Tshem tawm cov hlau nplaum uas khiav hauv lub raj coj mus, txiav lub cuab yeej los ntawm chav tswj thiab qhib nws lub hau.
Ua ntej sim tshem tawm tej yam khoom, nco ntsoov loosen cov txheej txheem screws. Txhawm rau ua qhov no, siv tus yuam sij Allen thiab spanner muab nrog lub chaw nres tsheb.
Ua ntej disassemble lub qhia raj teeb (1), lub log qhia (4), hniav thiab hniav clamp (5) thiab tom qab ntawd lub nozzles (2) + (3). Lus Cim: Cov khoom siv lub log * 3 ntawm cov khoom siv uas tsis muaj cov hlua hlau perforation (10) yog qhov txawv me ntsis ntawm cov uas muaj cov hlau nplaum perforation.
Thaum kawg, disassemble lub txee lub log (6), qhia Allen tus yuam sij los ntawm kev qhib pem hauv ntej (9) kom loosen nws cov ntsia hlau.

Hniav Clamp
4 Lub log tsheb * 1

Hniav
5

Inlet Nozzle
3

Txhawb Log * 3
10

Interm. Nozzle * 2 2

Traction Log * 3

* 3 Log Cheebtsam rau cov khoom siv yam tsis muaj kev sib tsoo hlau perforation.

* 2 Intermediate nozzle disassembly

Cov txee

9

Lub log 6

Qhia Tube
Teeb 1

* 1 Phau ntawv log bears txoj kab uas hla. 13

Phau Ntawv Qhia Cov Khoom Siv Sib Tham - nrog Solder Hlau Perforation:

Counter 1
Lub log

Ua ntej lub rooj log (1). Nco ntsoov tias nws cov xov nkag rau lub teeb ntsia hlau yog ua raws li lub tiaj tiaj ntawm lub axis (2). Yog tias tsis yog, lub teeb ntsia hlau yuav protrude, uas yuav ua rau muaj teeb meem rau kev thauj mus los ntawm cov hlau.

Ntxig Allen tus yuam sij los ntawm kev qhib lub hauv ntej yuav ua rau nws yooj yim dua rau zawm cov ntsia hlau (3).

Allen Key 3
ntxig rau ntawm no

2
Axis, Sab Sab

Sib dhos lub inlet nozzle (5).

Tom qab ntawd Ntxig lub nruab nrab nozzle (4) kom txog thaum nws lub dab tshos tiv thaiv lub tsev thiab ceev nws cov ntsia hlau.

8 Sib Clamp

Blade 7

Inlet
Nozzle 5

Sib dhos lub log qhia (6) thiab nruj nws cov ntsia hlau.
Sib sau cov hniav ua ntej (7), ces mount cov hniav clamp (8) mus rau tib axis thiab nruj nreem ntsia hlau. Ceev faj: tuav cov hniav kom zoo kom tsis txhob raug mob.

6

Kev taw qhia log * 1

Interm. Nozzle * 2

4

Thaum kawg, ntxig lub raj coj qhia teeb (9).

Counter Log

1

* 2 Intermediate nozzle sib dhos
14

3

Qhia Tube

Teeb 9

* 1 Phau ntawv log bears txoj kab uas hla.

Daim Ntawv Qhia Cov Khoom Siv Sib Tham - Tsis Muaj Cov Hlau Hlau Perforation:
Sib sau ua ntej lub rooj log (1) zoo ib yam li qhia hauv nplooj ntawv dhau los (saib (1), (2) thiab (3) ntawm nplooj ntawv ua ntej).
Tom qab ntawd ntxig rau qhov nruab nrab nozzle (2) kom txog thaum nws lub dab tshos tiv thaiv lub tsev thiab ceev nws cov ntsia hlau.
Sib dhos lub inlet nozzle (3).
Sib dhos lub log txhawb nqa * (4) thiab lub log traction (5) ntawm cov axis sib txuas thiab ceev cov ntsia hlau sib txuas
Thaum kawg, ntxig rau cov ntawv qhia raj teeb (6) thiab nruj nreem ntsia hlau.

4 Txhawb nqa
Log * 1

Traction Log

5

Inlet Nozzle

3

Interm. Nozzle * 2

2

* 2 Intermediate nozzle sib dhos

Counter Log

1

* 1 Kev them nyiaj yug log bears txoj kab uas hla.

Qhia Tube Teeb

6

15

Tswj txheej txheem
Feeder Teem Hom
Nkag mus rau Main Menu los ntawm nias, xaiv "Feeder Settings" thiab tom qab ntawd "Mode". Xaiv ntawm "nruam", "tsis txuas ntxiv" thiab "kev pab cuam".

tinuous Tsis muaj
m

TMinordeTeloinadreploraodcepsrsocess FSepeedeeFdreesedtetirnsgesttings TTFoeionelrdseTeeolrototapilndasgrepsatrmtoincegetsessrs lock SBtaatcikoSwntaastreidottninsgesttings CWouirneCtecolrgrousgesting
Lus Rov qab
Rov pib dua

Nruam Tsis Muaj

Tin rMelodade txheej txheem

Tsis tu ncua

SpPeleadce lub tin ntawm lub zog 5.0mm / s

Feeder paaranmd eptreersss: xauv

On

TWinirreedloiaamd eptreorcess

Rov qab

Tom ntej

1.00mm Tsis muaj

Hlau clogging deBtaecktiwonard

On

Rov qab Nias ok kom tawm

MoTdine reload txheej txheem

ContinuouPslace lub tin ntawm lub zog Discontinuous thiab nias:

Program

Tom ntej

Rov qab rov qab

Nias ok kom tawm

Nyob ntawm hom xaiv, muaj qhov sib txawv rau kev teeb tsa.

EdMitopdreToegmrapmadjust Kho kom raug pTreomgpralmevel teeb Teeb dSelfeaeupltdperloagyrams

Program
Tawm Ceev

FeedSelrepeapratemmepters xauv
ContPirnogurHaoimbuesrlsnoaatdMioendodedlaey
Peripher.

Rov qab

Rov qab

Hlau clogging detection Rov qab

Tsis muaj

Kho kom raug pEdroitgprarmogram

Tot

Tin reElodaitdpprorogcreasms

Plug teev ua hauj lwm teev

SpeedSdpeed

Feeder settings Tool settings

Pw tsaug zog teev
DiscontinuHiobeur hsrs hom
Tsis muaj cuab yeej teev

PrograSmtatioMn kev sib tw
Cov txee

Pw tsaug zog cyc

Fed cyc

Tin reTloinardeploraodcepsrssocess FeedeFreesedtetirnsgesttings

Hom

Tsis tu ncua

Ceev

Feeder parameters xauv DiscontinuouOsff

Cov cuab yeej sTeototilnsgesttings StatioSntasteiottninsgesttings CounCteorusnters

Rov qab Wire clogging detection
Rov qab

Tsis muaj

Ceev

ProgMraomdeversion

Tsis tu ncua

MaxSimpeuemd temp

5.0mm / s

MiniFmeuemdetrepmarpameters xauv

On

TWinirreedloiaamd eptreorcess

1o0mm wb

SounBdackward
TLSeetamntgipWotUYhnuoirnuureperintcssdisttelaostatgiotgniinsngisgdbeeBitneagCcccuotkipnodtnainteudous

Tsis muaj nyob

Qhov siab: 12mm

MoTdine reload txheej txheem Discontinuous

Ceev tso lub tin rau ntawm g2e0a.0rsmm/s

Ntev

thiab nias: 12.0mm

Feeder parameters xauv

On

Hlau txoj kab uas hla

Tom ntej: 1.00mm

Rov qab

Rov qab Tsis muaj

Hlau clogging detection

On

PrBesasckok tawm mus

ModeTemMpoaddejust

Kho kom raug pTreomCgproanlmetivneuloseuts

Teem dSelfeaeDupilstdcpoernloatgyinraumouss

FeedSelrepePaproratgemrmaempters xauv ProgrHaimbesrlnoaatdioend ncua

WirePdeiraimpheeter.r

Rov qab

Rov qab

Rov qab

Hlau clogging detection Rov qab

Program Off
On
1.00mm Tsis muaj On

ogram Tsis muaj

TroubleEdsithproogoramting

Kho qhov program

ModeTin reload txheej txheem

Ceev

Feeder nqis

Feeder parameters xauv

Chaw nres tsheb teeb meem daws teeb meem aSvpeaeidlable ntawm nplooj ntawv khoom ntawm wwSwpe.ejbd ctools.com Cov chaw teeb tsa

Koj puas xav hloov kho firmware?
16

BackwSatardtion settings Wire cCloougngitnegrsdetection
Rov qab

Nruam Tawm
Tsis muaj

Tin reload txheej txheem

Hom

Kev sib tham

ConTtiinuroeulosad txheej txheem

Tin reload txheej txheem

Hom

Feeder nqis

Ceev

Tswj txheej txheem cuab yeej nqis

Feeder tsis xauv Tin reload txheej txheem

Chaw nres tsheb chaw

Rov qab

Counters Program Hom Hlau clogging nrhiav kom tau

Rov qab

Ceev Feeder tsis kaw Tin reload txheej txheem BackNwoanred Hlau clogging nrhiav kom tau
Rov qab

Muab lub tin rau ntawm lub zog thiab nias:

Tsis muaj

Forward Rov qab

Muab lub tin rau ntawm lub iav Nruam

thiab nias:

Ncawv

Forward Program

Rov qab

Rov qab

Nrog ALE CU tuaj yeem muaj txog li 5 qhov kev pabcuam pub zaub mov definPreesds ok Sto eexlitect “Kho kom raug PPrersos gokrtao emxit” thiab nkag mus rau

qhov kev zov me nyuam tsis muaj.

Hom
Txuas ntxiv Discontinu Program

MProodgeram

Kho qhov program

Teem cov kev pab cuam ua ntej

ck

Feeder parameters xauv

Cov kev pab cuam loaded

BackNwoanred

on

Hlau clogging detection

Rov qab

ProEgdraitmprogram Program #1 Length

1

2.0

Kho qhov program
Ceev 2.0

2

5.0

Tsis muaj 3 e

1.0

mm

5.0 5.0 hli / s

Kho qhov program Ceev

Kho qhov program

Ceev

Program #4 Length

1

2.0

2

Tsis muaj

Tin reload txheej txheem
Feeder settings SpToeoedl chaw
S2t.a5tion nqis
NCOOnuenters

3

Tsis muaj

mm

Tsis muaj mm/s

Tin reload p Feeder setti Tool settings Chaw nres tsheb setti Counters

Rau txhua qhov kev pab cuam, nruab nrab ntawm 1 thiab 3 cov kauj ruam pub mis (ntev thiab ceev) yuav tsum tau txhais.

CoMntoindueouIsf tsawg dua Con3tinfueoues ding cov kauj ruam yog xav tau, teeb tsa xaim ntev thiab ceev mus rau "0.0" thiab cov parameter

Ceev yuav hloov mus rau "Tsis muaj".

ck

FeedeOr pffarameters xauv

Tawm

on

BWaicrkeNwocalnorQegdginugidcetekctioAn ccesNsonteo Feeder Setting Modes

sBaocklder xaim xaim qhov tseem ceeb tuaj yeem teeb tsa ncaj qha los ntawm kev tshuaj ntsuam ua haujlwm.

Xovxwm

or

hloov cov cuab yeej kub tus nqi.

Thaum lub vijtsam tseem ceeb tshwm sim, qhov ceev thiab qhov ntev yuav raug teeb tsa los ntawm nias

Cov nram qab no tsis tuaj yeem hloov pauv raws li qhov sib txawv dispensing hom:

Hloov kho

eing updated Nruam

Yo-urCstatoionns itsibneiungCouopnudtaisnteudoMusode: Ceev

- Hom Tsis Txuas: Ceev thiab ntev

Supplied: 12 mm – PrograSumppliMed:o12dmem: 3 pub parameter khub (ntev thiab ceev) rau txhua qhov kev pab cuam.

Nco tseg: Ua ntej xaiv qhov kev pab cuam los hloov kho ntawm qhov screen ua haujlwm los ntawm kev siv thiab

nruab nrab ntawm cov kev pab cuam.

. Hloov mus

e firmwDaorey koj xav hloov kho firmware?

Tus lej program #

17

Tswj txheej txheem

Ntawv qhia zaub mov

Tin Reload txheej txheem

Tin relDoadepfroaceusslt PIN: 0105
Feeder nqis

Tool settings Chaw nres tsheb chaw Counters

Lub ntsiab lus qhia
Tin reload txheej txheem Feeder nqis

Cov cuab yeej nqis

Chaw nres tsheb chaw

Cov txee

Hom Ceev

Tsis tu ncua

Feeder tsis xauv Tin reload txheej txheem

Rov qab

Hom

Hlau clogging deteScptioend

Tsis muaj

BaFcekeder parameters xauv

Tin reload txheej txheem

Rov qab

Hlau clogging detection

Nruam Tsis Muaj

Tin reload txheej txheem Muab lub tin rau ntawm lub zog thiab nias:
Forward Tin reload txheej txheem
Rov qab tso lub tin rau ntawm lub zog thiab nias:
Nias ok tawm Forward
Rov qab

Hom
Conti Disco Prog

Hom Kho kom raug program

Rov pib lus

Program

Kho qhov program

Rov qab

Kho qhov program
Feeder Settings Nias ok kom tawm

Tin reloa Feeder s

Teem cov kev pab cuam ua ntej

Feeder parameters xauv

Cov kev pab cuam loaded hom

Kho qhov program

Rov qab Hlau clogging

deteSetitodnefault

progNamonse

BaFcekeder parameters xauv

Cov kev pab cuam loaded

Tin reload process Feeder settings Program Tool settings
Chaw nres tsheb chaw Counters

Speed ​​Edit program

Ceev

Hom

Ceev Nruam

Ceev

5.0mm / s

Feeder parameterEsdliotcpkrogram

On

TinTWrienilroreaeddloiapamrdoepctereosrcsess

1.00 hli

FeeBdaecrksweattridngs

Tsis muaj

TooWl sieretticnlgosgging nrhiav kom tau

On

Chaw nres tsheb nqis Rov qab

Ceev

ToToilnsreetlti Chaw nres tsheb s
Cov txee

Ncawv

Hom

Rov qab mus tas li

Ceev

Hlau clogging detection

Feeder parameters xauv

BaOckff

Tsis muaj hom

Program

Counters Kho kom raug program

Kho kom raug pr

Counters PBWraoicrgkerwacmalorgdvgeirnsgiodneteSMcptoieodened

Tsis muaj

MaximOuffm

temp

BaFcekeder

Parameters Plug

xauv h

Nruam Edit program

Teem cov kev pab cuam ua ntej

Tawm

Ib feem

FMeeoddeeTropt arameters PSrpoegerda2m8s loaded

xauv

Ncawv

Yam tsawg kawg nkaus temp

Hom

Rov qab

Ua hauj lwm teev SleOepffhrs

SouCnodntinuous Hlau clogging dHeibteecrtihorns

TemDpiscuonnittsinuous

NoBatockols teev

Tsis muaj

0 Length6 0 BFeacekdwera0rpdarameters xauv

1 Hlau c2lo0gging nrhiav kom pom

1 Tom qab 2

Rov qab

ack ib

LenPgrtohguranmits

Pw tsaug zog cyc

20 Hlau c2lo4gging nrhiav kom pom

Tsis muaj Tsis muaj

Chaw nres tsheb pib dua

Fed cyc

Rov qab

UpdatiBnacBgkack

Fed mm

Koj cov chaw nres tsheb tau hloov kho tshiab

19 181 Co1n1t8inMuoo2ud2se786

Rov qab mus tas li

* pCaonrttiinauloausnd tag nrho suavSeurpspliaedrSe:p0esmehdmown

Khoom siv: 0mm

Feeder parameters xauv

Tawm

Tool Settings
Temp kho Temp theem teeb pw tsaug zog ncua pw tsaug zog temp Hibernation ncua Peripher.
Rov qab

Ceev 0ºC Tawm
0min 150ºC 10 feeb

Ncawv

Ncawv

Plug h
Worki Pw Hiber No too Pw Fed cy

Khoom siv: 12mm

Tin reload txheej txheem

Hloov kho lus
Koj cov chaw nres tsheb tau hloov kho tas mus li
Lus Askiv

Feeder settings Tool settings

Deutsch EspañoSlupplied: 12 hli

Chaw nres tsheb chaw Koj puas xav hloov kho

Français firmware?Italiano

Cov txee

Português

P

Koj puas xav hloov kho firmware?

Rov qab

Hlau clogging detection

Lus Askiv Deutsch

Rov qab

Español

Tsis muaj
Program version Maximum temp Yam tsawg kawg nkaus temp

Italiano

Suab

Temp units Length units

Português

Chaw nres tsheb pib dua

Kev kho tshiab

Rov qab

Koj cov chaw nres tsheb tau hloov kho tshiab

Tsis tu ncua

Chaw nres tsheb chaw

Program version Maximum temp Yam tsawg kawg nkaus temp
PIN Off Sound Temp units Length units Chaw nres tsheb pib dua
Rov qab

8M88o6d7e32

DisconMtinoudoe

S4p0e0eºdC

Ceev

Le2n0g0tºhC FeedOeffr parameters xauv

Lengt Pub

On

BackwºCard mm
Hlau clogging detection

BaNckown Hlau

Rov qab

* xaiv ntawm mm thiab ntiv tes

Khoom siv: 12mm

18

Accessories
GALE Qhia Cov Khoom Siv rau ALE250

Cov ntaub ntawv siv rau GALE Qhia Cov Khoom Siv Tsis Muaj Cov Hlau Hlau Perforation

Solder Hlau Ø ntau yam kev siv

Guide Kit Ref.

Guide Set Ref.

Qhov Nozzle
Ref.

Nozzle Ref.

Traction Log Ref.

Txhawb Log
Ref.

Inlet Nozzle
Ref.

Interm. Nozzle
Ref.

Counter Log
Ref.

Ntsia Hlau Ref.

Threaded Stud Ref.

Nozzle tuav
Caij nplooj ntoos hlav Ref.

0.38 ~ 0.40 hli 0.015 ~ 0.016 hauv 0.46 ~ 0.56 hli 0.018 ~ 0.022 hauv 0.60 ~ 0.64 hli 0.023 – 0.025 hauv 0.70 – 0.78 mm 0.028 – 0.031 mm 0.80-0.82 hli 0.032-0.033 hli 0.90-1.10 hauv 0.036-0.044 hli 1.14-1.27 hauv 0.045-0.051 hli 1.50-1.57 hauv 0.060-0.063 hauv 1.60-1.63 hauv 0.063-0.065 hauv XNUMX-XNUMX hauv XNUMX-XNUMX hauv XNUMX-XNUMX hauv XNUMXmm
1.80 hli 0.073 nyob rau hauv

GALE04D-A GALE05D-A GALE06D-A GALE07D-A GALE08D-A GALE10D-A

0032405 0028358 0028491 0028492 0028359 0028360 ib

0032512 0025268 0022994 0025289 0025270 0021560 ib

0021158

0019479

0020345
0019480

0019520
0018632

0024954
0025293 0025291

0026693

0026695 2xXNUMX.

0026696 3xXNUMX.

0030549

GALE12D-A 0028361 0025272 GALE15D-A 0028362 0025274 GALE16D-A 0028363 0025276 GALE18D-A 0028493 0021559

0019481

0009171

0024957

0028367

0024233

0024959

26694

Cov ntaub ntawv siv rau GALE Guide Kits nrog Solder Wire Perforation

Guide Kit Ref.
Solder Hlau Ø ntau yam kev siv

Guide Set Ref.

Qhov Nozzle
Ref.

Nozzle Ref.

Guide Log
Ref.

Hniav Ref.

Hniav Clamp
Ref.

Inlet Nozzle
Ref.

Interm. Nozzle
Ref.

Counter Log
Ref.

Ntsia Hlau Ref.

Threaded Stud Ref.

Nozzle tuav
Caij nplooj ntoos hlav Ref.

0.8 hli 0.032 hli 1.0 hli 0.040 hauv 1.2 hli 0.047 hauv 1.5 hli 0.059 hauv 1.6 hli 0.063 nyob rau hauv

GALE08V-A 0028359 0025270 GALE10V-A 0028360 0021560 GALE12V-A 0028361 0025272 GALE15V-A 0028362 0025274

0021158

0021696 0021699

0021555

0018638

0018632
0019171

0024955 0024956

0026693 (Muab nrog ALE)
0026694

0026695 2xXNUMX.

0026696 3xXNUMX.

0030549

GALE16V-A 0028363 0025276

0025922

0024233

19

Kev tu
Ua ntej nqa tawm kev saib xyuas, nco ntsoov hloov lub cuab yeej tawm thiab txiav tawm ntawm lub mains. Cia cov khoom siv kom txias.
- Ntxuav lub chaw nres tsheb tso saib nrog lub khob ntxuav lossis kev tshaj tawmamp daim ntaub.
- Siv adamp daim ntaub los ntxuav lub casing thiab lub cuab yeej. Cawv tsuas yog siv los ntxuav cov hlau.
- Txheeb xyuas ib ntus kom paub tseeb tias cov hlau ntawm lub cuab yeej thiab sawv ntsug yog huv si kom lub chaw nres tsheb tuaj yeem ntes cov cuab yeej raws li txoj cai.
- Khaws lub taub hau kom huv si thiab tinned ua ntej cia kom tsis txhob muaj oxidation. Rusty thiab qias neeg qhov chaw txo cov cua sov hloov mus rau qhov sib koom ua ke.
- Saib xyuas txhua lub sijhawm thiab cov kav dej.
- Hloov cov khoom puas lossis puas. Siv cov khoom qub JBC nkaus xwb.
- Kev kho yuav tsum tsuas yog ua los ntawm JBC tso cai kev pabcuam.

Ntxuav ib ntus
Ntxuav ib ntus
Ntxuav ib ntus

Ntiaj teb
- FUSE Thaum cov lus ceeb toom no tshwm sim ntawm lub vijtsam tseem ceeb, lub ntiaj teb fuse yuav tsum tau hloov.
- Hloov lub tshuab fuse raws li hauv qab no (siv rau ob qho tib si lub ntiaj teb fuse thiab lub ntsiab fuse):
1. Tshem tawm lub fuse tuav thiab tshem tawm lub fuse. Yog tias tsim nyog, siv lub cuab yeej los ua kom nws tawm.
2. Ntxig lub fuse tshiab rau hauv lub fuse tuav thiab xa rov qab mus rau qhov chaw nres tsheb.

Fuse nrog

Earthing Fuse

Tsuas yog siv nrog 250 V fuse
Ntiaj teb FUSE F1.25 A

20

Main Fuse (hauv qab chav tswj) Fuse Holder

Kev nyab xeeb
Nws yog ib qho tseem ceeb kom ua raws li cov lus qhia kev nyab xeeb kom tsis txhob muaj hluav taws xob poob siab, raug mob, hluav taws kub lossis tawg. - Tsis txhob siv cov units rau lwm lub hom phiaj uas tsis yog soldering lossis rework. Kev siv tsis raug yuav ua rau muaj hluav taws kub. - Cov hlua hluav taws xob yuav tsum tau ntsaws rau hauv cov hauv paus pom zoo. Nco ntsoov tias nws yog grounded kom zoo ua ntej siv. Thaum unplug nws, tuav lub plug, tsis yog hlau. - Tsis txhob ua haujlwm ntawm cov khoom siv hluav taws xob nyob. - Cov cuab yeej yuav tsum tau muab tso rau hauv qhov muag thaum tsis siv txhawm rau txhawm rau qhib hom pw tsaug zog. Lub taub hau los yog lub taub hau, cov hlau ntawm lub cuab yeej thiab cov khoom muag tseem tuaj yeem kub txawm tias qhov chaw nres tsheb raug tua. Ua tib zoo saib xyuas, suav nrog thaum kho qhov chaw sawv ntsug. - Tsis txhob tso lub cuab yeej tawm thaum nws qhib. - Tsis txhob npog cov qhov cua nkag. Thaum tshav kub kub tuaj yeem ua rau cov khoom kub hnyiab tau. - Tsis txhob muaj dej ntws los ntawm daim tawv nqaij lossis qhov muag kom tsis txhob muaj qhov khaus khaus. - Ceev faj nrog cov pa taws uas tsim thaum soldering. - Khaws koj qhov chaw ua haujlwm kom huv thiab huv. Hnav tsom iav thiab hnab looj tes tiv thaiv tsim nyog thaum ua haujlwm kom tsis txhob muaj kev puas tsuaj rau tus kheej. - Kev saib xyuas tshaj plaws yuav tsum tau ua nrog cov kua tin pov tseg uas tuaj yeem ua rau kub hnyiab. - Cov khoom siv no tuaj yeem siv tau los ntawm cov menyuam yaus hnub nyoog qis dua yim xyoo thiab cov neeg uas muaj peev xwm txo qis lub cev, hnov ​​​​lus lossis lub hlwb lossis tsis muaj kev paub dhau los yog tias lawv tau txais kev saib xyuas txaus lossis kev qhia txog kev siv cov cuab yeej thiab nkag siab txog kev phom sij cuam tshuam. Cov menyuam yaus yuav tsum tsis txhob ua si nrog cov khoom siv. - Kev tu yuav tsum tsis txhob ua los ntawm cov menyuam yaus tshwj tsis yog raug saib xyuas.
21

Specifications
ALE Automatic-Feed Soldering Control Unit
Nrog Solder Hlau Perforation
rau hlau ø 0.8mm: Ref. ALE-908UVA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-108UVA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-208UVA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau ø 1.0mm: Ref. ALE-910UVA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-110UVA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-210UVA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau ø 1.2mm: Ref. ALE-912UVA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-112UVA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-212UVA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 1.5 mm: Ref. ALE-915UVA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-115UVA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-215UVA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 1.6 mm: Ref. ALE-916UVA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-116UVA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-216UVA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
Tsis Siv Neeg Hlau Perforation
rau hlau Ø 0.38 - 0.4 mm: Ref. ALE-904UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-104UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-204UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 0.45 - 0.56 mm: Ref. ALE-905UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-105UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-205UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 0.60 - 0.64 mm: Ref. ALE-906UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-106UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-206UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 0.70 - 0.78 mm: Ref. ALE-907UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-107UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-207UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
22

Specifications

Tsis Siv Neeg Hlau Perforation

rau hlau Ø 0.80 - 0.82 mm: Ref. ALE-908UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-108UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-208UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau ø 0.90 - 1.10 mm: Ref. ALE-910UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-110UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-210UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 1.14 - 1.27 mm: Ref. ALE-912UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-112UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-212UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 1.50 - 1.57 mm: Ref. ALE-915UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-115UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-215UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 1.60 - 1.63 mm: Ref. ALE-916UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-116UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-216UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V
rau hlau Ø 1.80 mm: Ref. ALE-918UA - 100V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-118UA - 120V 50/60Hz. Input fuse: T2A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V Ref. ALE-218UA - 230V 50/60Hz. Input fuse: T1A. Earthing Fuse: F 1.25A. Tawm tswv yim: 23.5V

– Nominal Fais Fab: – Peak Power (Tool): – Selectabe Temperature: – Idle Temp. Stability (tseem cua): - Temp. Qhov tseeb: - Temp. Kev kho: - Kev sib txuas:
- Equipontencial bonding: - Tswv yim rau hauv av Voltage/Resistance:
- Solder Hlau Dia: - Max. Hlau Length: - Min. Hlau Length: – Forward Speed ​​Range – Speed ​​of Backward Function

180 W 150 W 90 - 450 ° C / 190 - 840 ° F ± 1.5ºC / ± 3ºF (Ua tau thiab tshaj IPC J-STD-001) ± 3% (Siv cov ntaub ntawv pov thawj) ± 50ºC / ± 90ºF (Los ntawm chaw nres tsheb cov ntawv qhia zaub mov ) USB-A Uptade thiab files ntshuam-export USB-B Software PC RJ12 Fume extractor kev twb kev txuas Yeem kev txuas rau EPA <2 mV RMS / <2 ohms Raws li thiab tshaj ANSI/ESD S20.20-2014 / IPC J-STD-001F Raws li kev yuav khoom siv 250 mm / 9.84 nyob rau hauv (rau discontinuous + program hom) 0.5 hli / 0.02 nyob rau hauv 0.5 rau 50 ~ 0.02 hli / s 1.97 ~ 0.0 mm / s / 5.0 ~ 0.5 in / s

Cov ntaub ntawv ntxiv nyob rau nplooj ntawv tom ntej.
23

Specifications
– Tus naj npawb ntawm Cov Kev Pabcuam: – Tus naj npawb ntawm Cov Txheej Txheem: – Tswj Chav Dimensions:
(L x W x H)
- Tag nrho Net Nyhav:
- Pob Dimensions / Luj: (L x W x H)
Tau tshaj Solder Reel: - Reel Nyhav: - Max. Reel taub: - Max. Reel Qhov siab:
Ua raws li cov qauv CE. ESD nyab xeeb.

5 Programs 1 mus rau 3 Kauj Ruam (rau txhua qhov program) 235 x 145 x 150 mm 9.25 x 5.71 x 5.91 in
5.81 kg / 12.81 lb
368 x 368 x 195 mm / 6.72 Kg 14.49 x 14.49 x 7.68 hauv / 14.82 lb
Mus txog 2 kg / 4.41 lb 100 mm / 3.94 in 100 mm / 3.94 in

Warranty JBC's 2 xyoo warranty npog cov khoom siv no tiv thaiv txhua qhov kev tsim khoom tsis xws luag, suav nrog kev hloov cov khoom tsis raug thiab kev ua haujlwm. Warranty tsis npog cov khoom hnav lossis siv tsis raug. Yuav kom lub warranty siv tau, cov khoom siv yuav tsum tau xa rov qab, postage them, rau tus neeg muag khoom uas nws tau yuav. Tau 1 xyoo ntxiv JBC warranty los ntawm kev tso npe ntawm no: https://www.jbctools.com/productregistration/ hauv 30 hnub ntawm kev yuav khoom. Yog tias koj sau npe, koj yuav tau txais email ceeb toom txog kev hloov tshiab software tshiab rau koj cov khoom sau npe.
Cov khoom no yuav tsum tsis txhob muab pov rau hauv cov khib nyiab. Raws li European cov lus qhia 2012/19/EU, cov khoom siv hluav taws xob thaum kawg ntawm nws lub neej yuav tsum tau sau thiab xa rov qab mus rau qhov chaw tso cai rov ua dua tshiab.

0030217-081124 : kuv

Cov ntaub ntawv / Cov ntaub ntawv

JBC ALE-908UVA Tsis Siv Neeg Pub Soldering Control Unit [ua pdf] Phau ntawv qhia ALE-908UVA, ALE-108UVA, ALE-208UVA, ALE-915UVA, ALE-115UVA, ALE-215UVA, ALE-910UVA, ALE-110UVA, ALE-210UVA, ALE-916UVA, ALE-116UVA, ALE-216-UVA 908 AWV Tsis Siv Neeg Pub Soldering Control Unit, ALE-908UVA, Tsis Siv Neeg Pub Soldering Control Unit, Pub Soldering Control Unit, Soldering Control Unit, Control Unit, Unit

Cov ntaub ntawv

• Cov neeg siv phau ntawv