TANDD RTR505B yoNgeniso lwemodyuli yoMsebenzisi

Ngaphambi kokusebenzisa imveliso, nceda uqhoboshele i-ferrite core enikeziweyo * kwintambo echanekileyo ecaleni kwemodyuli ukubonelela ngokunciphisa ingxolo.

Izilumkiso malunga nokusebenzisa iimodyuli zoNgeniso

• Asinaxanduva kuwo nawuphi na umonakalo owenziwe ngokudibanisa kwi-logger yedatha ngaphandle kwezo zidweliswe njengezihambelanayo.
• Musa ukwahlula, ukulungisa okanye ukuguqula imodyuli yokufaka kunye nentambo yayo.
• Ezi modyuli zegalelo azinamanzi. Musa ukuwavumela ukuba abe manzi.
• Musa ukusika okanye ujije intambo yoqhagamshelo, okanye ujiwuze intambo ujikeleze ngelogi eqhagamshelweyo.
• Musa ukuveza impembelelo enamandla.
• Ukuba kukho nawuphi na umsi, ivumba elingaqhelekanga okanye izandi ezikhutshwa kwimodyuli yokufaka, yeka kwangoko ukusebenzisa.
• Musa ukusebenzisa okanye ukugcina iimodyuli zongeniso kwiindawo ezidweliswe ngezantsi. Inokubangela ukungasebenzi kakuhle okanye iingozi ezingalindelekanga.
• Iindawo ezisesichengeni sokukhanya kwelanga
• Emanzini okanye kwiindawo ezivuleleke kumanzi
• Iindawo ezivezwe kwizinyibilikisi eziphilayo kunye nerhasi eyonakalisayo
• Iindawo ezivezwe kumhlaba owomeleleyo wemagnethi
• Iindawo ezivezwe kumbane ongatshintshiyo
• Iindawo ezikufuphi nomlilo okanye ezivezwe kubushushu obugqithisileyo
• Iindawo ezivezwe kuthuli olugqithisileyo okanye umsi
• Iindawo ezifikelelekayo kubantwana abancinci
• Ukuba ubuyisela imodyuli yongeniso equlathe useto lohlengahlengiso, qiniseka ukuba wenza kwakhona naluphi na useto olufunekayo lohlengahlengiso.
• Xa usebenzisa i-RTR505B kwaye wenze utshintsho kuhlobo lwemodyuli yokufaka okanye ikhebula, kuyimfuneko ukuqalisa i-logger yedatha kwaye wenze kwakhona zonke izicwangciso ezifunwayo.

Imodyuli yeThermocouple TCM-3010

Into yomlinganiselo	Ubushushu
Izinzwa ezihambelanayo	Thermocouple: Uhlobo K, J, T, S
Uluhlu loMlinganiso	Uhlobo K : -199 ukuya ku-1370°C Uhlobo T : -199 ukuya ku-400°C Uhlobo J : -199 ukuya ku-1200°C Uhlobo S : -50 ukuya ku-1760°C
IsiGqibo soMlinganiselo	Uhlobo K, J, T: 0.1 ° C Uhlobo lwe-S : Malunga. 0.2°C
Ukuchaneka komlinganiselo*	Imbuyekezo yeCompact Junction	±0.3 °C kwi-10 ukuya kuma-40 °C ±0.5 °C ku -40 ukuya kwi-10 °C, 40 ukuya kuma-80 °C
	Umlinganiselo weThermocouple	Uhlobo lwe-K, J, T : ± (0.3 °C + 0.3 % yokufunda) Uhlobo lwe-5: ±( 1 °C + 0.3 % yokufunda)
Uqhagamshelwano lweSensom	Qinisekisa ukuba usebenzisa i-sensor ye-thermocouple eneplagi encinci ye-thermocouple eqhotyoshelweyo. I-T&D ayenzi zifumaneke ezi plugs okanye izixhobo zoluvo ukuba zithengiswe.
Indawo yokusebenza	Ubushushu: -40 ukuya kuma-80°C Ukufuma: 90%RH okanye ngaphantsi (akukho condensation)

• Impazamo yoluvo ayiqukwanga.
• Amaqondo obushushu angentla [°C] ngawendawo yokusebenza yemodyuli yongeniso.

Ukuqhagamshela iSeva

1. Jonga uhlobo loluvo kunye ne-polarity (udibanise kunye nothabatha iimpawu).
2. Faka i-miniature thermocouple connector, ulungelelanisa njengoko kubonisiwe kwimodyuli yegalelo.
   

• Xa ufaka i-sensor kwimodyuli yegalelo, qiniseka ukuba utshatisa i-plus kunye ne-minus iimpawu kwisidibanisi soluvo kwezo zikwimodyuli.
• I-logger yedatha ibona uqhawulo malunga nemizuzwana engama-40, ibangela ukuba ibonise ubushushu obungalunganga ngokuthe ngqo emva kokuba ikhonkco isusiwe.
• Qinisekisa ukuba uhlobo lwe-thermocouple (K, J, T, okanye S) yenzwa ukuba idityaniswe kwimodyuli yokufaka, kunye nohlobo loluvo oluza kuboniswa kwisikrini se-LCD se-logger yedatha ziyafana. Ukuba zahlukile, tshintsha uhlobo loluvo usebenzisa isoftware okanye usetyenziso.
• Uluhlu lokulinganisa alukho nakancinci isiqinisekiso soluhlu lokuqina kobushushu boluvo. Nceda ujonge uluhlu lobushushu-ubude besixhobo soluvo esisetyenziswayo.
• "Impazamo" iya kubonakala kumboniso welogger yedatha xa inzwa ingadityaniswanga, ikhutshiwe okanye intambo yaphukile.

Imodyuli ye-PT PTM-3010

Into yomlinganiselo	Ubushushu
Izinzwa ezihambelanayo	Pt100 (3-wire / 4-wire), Pt1000 (3-wire / 4-wire)
Uluhlu loMlinganiso	-199 ukuya ku-600°C (ngaphakathi komgangatho wobushushu boluvo kuphela)
IsiGqibo soMlinganiselo	0.1°C
Ukuchaneka komlinganiselo*	±0.3 °C + 0.3 % yokufunda) kwi-10 40 C ±((0.5 °C + 0.3 % yokufunda) ku -40 ukuya kwi-10°  10°C, 40 ukuya kuma-80°C
Uqhagamshelwano lweSensom	Screw Clamp Ibhloko yetheminali: 3-Itheminali
Indalo esebenzayo	Ubushushu: -40 ukuya kuma-80°C Ukufuma: 90%RH okanye ngaphantsi (akukho condensation)
Ibandakanyiwe	Ikhava yoKhuseleko

• Impazamo yoluvo ayiqukwanga.
• Amaqondo obushushu angentla [°C] ngawendawo yokusebenza yemodyuli yongeniso

Ukuqhagamshela iSeva

1. Khulula izikrufu zebhloko yetheminali.
2. Slayida iitheminali zentambo yoluvo ngokusebenzisa imodyuli yegalelo lokhuselo lokhuselo.
3. Faka iitheminali A kunye no-B ngokomzobo oboniswe kwibhloko yetheminali kwaye uphinde uqinise izikrufu.
   
   Kwimeko ye-4-wire sensor, enye yeengcingo ze-A iya kushiywa ikhutshwe.
4. Gquma ibhloko yetheminali kwakhona ngekhava yokukhusela
   

• Qinisekisa ukuba uhlobo loluvo (100Ω okanye 1000Ω) ukuba ludityaniswe kwimodyuli yongeniso, kunye nodidi loluvo oluza kuboniswa kwiscreen seLCD selogger yedatha ziyafana. Ukuba zahlukile, tshintsha uhlobo loluvo usebenzisa isoftware.
• Qinisekisa ukuba uqhagamshela ngokuchanekileyo iingcingo zokukhokela ngokomzobo oboniswe kwibhloko yetheminali, kwaye uqinise ngokukhuselekileyo izikrufu kwibhloko yetheminali.
• Iitheminali ezimbini “B” azinapolarity.
• Uluhlu lokulinganisa alukho nakancinci isiqinisekiso soluhlu lokuqina kobushushu boluvo. Nceda ujonge uluhlu lobushushu-ubude besixhobo soluvo esisetyenziswayo.
• "Impazamo" iya kubonakala kumboniso welogger yedatha xa inzwa ingadityaniswanga, ikhutshiwe okanye intambo yaphukile.

4-20mA Imodyuli AIM-3010

Into yomlinganiselo	4-20mA
Uluhlu lwangoku	I-0 ukuya kwi-20mA (Isebenza ukuya kuthi ga kwi-40mA)
IsiGqibo soMlinganiselo	0.01 mA
Ukuchaneka koMlinganiso*	±(0.05 mA + 0.3 % yokufunda) kwi-10 ukuya kuma-40 °C ±(0.1 mA + 0.3 % yokufunda) kwi -40 ukuya ku-10 °C, 40 ukuya ku-80 °C
Ukuchasa ngegalelo	1000 ±0.30
Uqhagamshelwano lweSensom	UQhagamshelwano loFakelo lweCable: 2 dibanisa (+) iitheminali ezinxuseneyo kunye ne-2 thabatha (-) iitheminali ezinxuseneyo kwitotali yeetheminali ezi-4
Iingcingo ezihambelanayo	Ucingo olunye: q)0.32 ukuya ci>0.65mm (AWG28 ukuya AWG22) eCetyisiweyo: o10.65mm(AWG22) Ucingo olujijekileyo: 0.32mm2(AWG22) kunye ne-0.12mm okanye ngaphezulu kwidayamitha Ubude bomtya: 9 tol Omm
Indalo esebenzayo	Ubushushu: -40 ukuya kuma-80°C Ukufuma: 90%RH okanye ngaphantsi (akukho condensation)

• Amaqondo obushushu angentla [°C] ngawendawo yokusebenza yemodyuli yongeniso.

Ukuqhagamshela iSeva

Sebenzisa isixhobo esifana ne-screwdriver ukucinezela iqhosha le-terminal kwaye ufake ucingo emngxunyeni.

Example yoQhagamshelwano lweSensor

Kunokwenzeka ukudibanisa inzwa kunye ne-voltagimitha kwimodyuli ngaxeshanye.

• Musa ukusebenzisa umsinga wombane ongaphaya koluhlu lwangoku lokufakwayo. Ukwenza oko kungonakalisa imodyuli yokufakwayo, kubangela ubushushu okanye umlilo ukuba kwenzeke.
• Xa ususa, musa ukutsala ucingo ngenkani, kodwa cinezela ezantsi iqhosha njengoko usenza xa ufaka kwaye ngobunono ulukhuphe ucingo ngaphandle komngxuma.

Umqulutage Imodyuli VIM-3010

Into yomlinganiselo	Umqulutage
Igalelo VoltagUluhlu	0 ukuba 999.9mV, 0 ukuba 22V Ukuqhekeka Voltage: ±28V
IsiGqibo soMlinganiselo	ukuya kuthi ga kwi-400mV ku-0.1 mV ukuya kuthi ga kwi-6.5V kwi-2mV ukuya kuthi ga kwi-800mV kwi-0.2mV ukuya kuthi ga kwi-9.999V kwi-4mV ukuya kuthi ga kwi-999mV kwi-0.4mV ukuya kuthi ga kwi-22V kwi-10mV ukuya kuthi ga kwi-3.2V kwi-1 mV
Ukuchaneka komlinganiselo*	±(0.5 mV + 0.3 % yokufunda) kwi-10 ukuya kuma-40 °C ±(1 mV + 0.5 % yokufunda) ku-40 ukuya ku-10 °C, 40 ukuya ku-80 °C
I-Impedans yegalelo	mV Uluhlu: Malunga 3M0 V Uluhlu: Malunga 1 MO
Preheat Umsebenzi	Umqulutage Uluhlu: 3V ukuba 20V100mA Uluhlu lwexesha: 1 ukuya kwi-999 sec. (kwiiyunithi zomzuzwana omnye) Umthamo wokuLawulwa: ngaphantsi kwe-330mF
Uqhagamshelwano lweSensom	UQhagamshelwano loFakelo lweCable: 4-Terminal
Iingcingo ezihambelanayo	Ucingo olunye: V3.32 ukuya ku-cA).65mm (AWG28 ukuya ku-AWG22) eCetyisiweyo: 0.65mm (AWG22) Ucingo olujijekileyo: 0.32mm2(AWG22) kunye :1,0.12rra okanye ngaphezulu kwidayamitha Ubude beStrip: 9 to10mm
Indawo yokusebenza	Ubushushu: -40 ukuya kuma-80°C Ukufuma: 90%RH okanye ngaphantsi (akukho condensation)

• Amaqondo obushushu angentla [°C] ngawendawo yokusebenza yemodyuli yongeniso

Ukuqhagamshela iSeva

Sebenzisa isixhobo esifana ne-screwdriver ukucinezela iqhosha le-terminal kwaye ufake ucingo emngxunyeni.

Example yoQhagamshelwano lweSensor

Kunokwenzeka ukudibanisa inzwa kunye ne-voltagimitha kwimodyuli ngaxeshanye.

• Akwenzeki ukulinganisa umthamo othabathayotage nale modyuli.
• Xa i-impedance yomthombo wesignali iphezulu, impazamo yokuzuza iya kwenzeka ngenxa yotshintsho kwi-impedance yegalelo.
• Umqulutage ukuba ligalelo "Preheat" kufuneka ibe 20V okanye ngaphantsi. Ukufaka umthamo ophezulutage inokubangela umonakalo kwimodyuli yongeniso.
• Xa umsebenzi we-preheat ungasetyenziswanga, musa ukudibanisa nantoni na kwi "Preheat IN" okanye "Preheat OUT".
• Xa usebenzisa umsebenzi we-preheat, kuyimfuneko ukuba isignali yemveliso ye-GND (-) kunye namandla e-GND (-) zidibaniswe kunye.
• Ixesha lokuhlaziya i-LCD kwi-logger yedatha ngokusisiseko ukusuka kwi-1 ukuya kwi-10 imizuzwana, kodwa xa usebenzisa umsebenzi wokushisa kwangaphambili umboniso we-LCD uya kuhlaziywa ngokusekelwe kwixesha lokurekhoda elibekwe kwi-logger yedatha.
• Xa ususa iingcingo ezikhokelayo kwi-VIM-3010, iingcingo eziphambili ziya kubonakala; Lumkela ukothuka kombane kunye/okanye iisekethe ezimfutshane.
• Xa ususa, musa ukutsala ucingo ngenkani, kodwa cinezela ezantsi iqhosha njengoko usenza xa ufaka kwaye ngobunono ulukhuphe ucingo ngaphandle komngxuma.

I-Pulse Input Cable PIC-3150

Into yomlinganiselo	IPulse Bala
Uphawu lokufaka:	Non-voltage Igalelo loQhagamshelwano Voltage Igalelo (0 ukuya ku-27 V)
Ukufunyanwa kweVoltage	Phantsi: 0.5V okanye ngaphantsi, Hi: 2.5V okanye ngaphezulu
Isihluzo sokuncokola	ON: 15Hz okanye ngaphantsi OFF: 3.5 kHz okanye ngaphantsi (xa usebenzisa imiqondiso yesikwere samaza ka-0-3V okanye ngaphezulu)
Impendulo yePolarity	Khetha nokuba nguLo—'Hi okanye Hi—,Lo
Ubuninzi bokubala	61439 / Isithuba sokuRekhoda
I-Impedans yegalelo	Malunga. 1001c0 tsala phezulu

• Xa udibanisa ikhebula kwinto yokulinganisa, ukwenzela ukuba ucingo ngokufanelekileyo uqinisekise ukuhambelana ne-terminal polarities (RD +, BK -).

 

 

Amaxwebhu / Izibonelelo

TANDD RTR505B Imodyuli yoNgeniso [pdf] Incwadi yokusebenzisa I-RTR505B, TR-55i, RTR-505, iModyuli yoNgeniso

Iimbekiselo

• Incwadi yokusebenzisa