TANDD RTR505B Input Module Tus neeg siv phau ntawv
Ua ntej siv cov khoom, thov muab cov ferrite core * xa mus rau lub cable sab xis ntawm lub module los muab cov suab nrov.
Cov ntsiab lus
zais
Kev ceeb toom txog kev siv Input Modules
- Peb tsis muaj lub luag haujlwm rau kev puas tsuaj los ntawm kev sib txuas rau cov ntaub ntawv logger uas tsis yog cov npe uas tau tshaj tawm.
- Tsis txhob muab sib cais, kho lossis hloov kho cov khoom siv nkag thiab nws cov cable.
- Cov input modules no tsis muaj dej tsis muaj dej. Tsis txhob cia lawv ntub dej.
- Tsis txhob txiav los yog twist lub cable txuas, los yog viav vias lub cable ncig nrog lub logger txuas nrog.
- Tsis txhob cuam tshuam rau qhov muaj zog.
- Yog tias muaj cov pa luam yeeb, tsw ntxhiab tsw txawv lossis lub suab tawm los ntawm cov khoom siv nkag, tam sim ntawd nres siv.
- Tsis txhob siv lossis khaws cov khoom siv nkag rau hauv qhov chaw xws li teev hauv qab no. Nws yuav ua rau muaj kev ua haujlwm tsis zoo lossis kev sib tsoo uas tsis tau npaj tseg.
- Cov cheeb tsam raug tshav ntuj ncaj qha
- Hauv dej lossis thaj chaw raug dej
- Cov cheeb tsam raug cov organic solvents thiab corrosive gas
- Cov cheeb tsam raug muaj zog magnetic teb
- Cov cheeb tsam raug hluav taws xob zoo li qub
- Cov cheeb tsam ze hluav taws lossis raug tshav kub heev
- Cov cheeb tsam raug cov hmoov av ntau dhau los yog cov pa luam yeeb
- Qhov chaw nyob ze ntawm cov me nyuam me
- Yog tias koj hloov ib lub tswv yim module uas muaj cov kev hloov kho, nco ntsoov rov ua qhov kev hloov kho uas xav tau.
- Thaum siv RTR505B thiab hloov pauv rau hom input module lossis cable, nws yog ib qho tsim nyog los pib cov ntaub ntawv logger thiab rov ua txhua qhov kev xav tau.
Thermocouple Module TCM-3010
| Khoom ntsuas | Kub | |
| Tshaj Tawm Sensors | Thermocouple: Hom K, J, T, S | |
| Kev ntsuas ntau | Hom K: -199 txog 1370 ° C Hom T: -199 txog 400 ° C Hom J: -199 txog 1200 ° C Hom S: -50 txog 1760 ° C |
|
| Kev ntsuas kev daws teeb meem | Hom K, J, T: 0.1 ° C Hom S: Approx. 0.2 ° C | |
| Kev ntsuas qhov tseeb * | Kev Sib Cais Txias Txias | ± 0.3 ° C ntawm 10 txog 40 ° C ± 0.5 ° C ntawm -40 txog 10 ° C, 40 txog 80 ° C |
| Thermocouple Kev Ntsuas | Hom K, J, T : ± (0.3 ° C + 0.3% ntawm kev nyeem ntawv) Hom 5 : ± (1 ° C + 0.3% ntawm kev nyeem ntawv) | |
| Kev sib txuas ntawm Sensor | Nco ntsoov siv lub thermocouple sensor nrog me me thermocouple ntsaws txuas. T&D tsis ua kom muaj cov plugs lossis sensors rau muag. | |
| Kev ua haujlwm ib puag ncig | Kub: -40 txog 80 ° C Humidity: 90% RH lossis tsawg dua (tsis muaj condensation) |
|
- Sensor yuam kev tsis suav nrog.
- Qhov ntsuas kub saum toj no [° C] yog rau qhov chaw ua haujlwm ntawm cov khoom siv nkag.
Txuas Cov Sensor
- Txheeb xyuas hom sensor thiab polarity (ntxiv thiab rho tawm cov cim).
- Ntxig lub me me thermocouple connector, aligning raws li qhia nyob rau hauv lub input module.
Thaum tso lub sensor rau hauv ib lub tswv yim module, nco ntsoov ua kom phim cov cim ntxiv thiab rho tawm ntawm lub sensor txuas rau cov nyob hauv module.- Cov ntaub ntawv logger pom qhov kev sib txuas ntawm txhua 40 vib nas this, ua rau nws pom qhov ntsuas kub tsis raug ncaj qha tom qab lub connector raug tshem tawm.
- Xyuas kom tseeb tias hom thermocouple (K, J, T, lossis S) ntawm lub sensor yuav tsum txuas nrog cov khoom siv nkag, thiab hom sensor yuav tsum tau muab tso rau ntawm lub vijtsam LCD ntawm cov ntaub ntawv logger yog tib yam. Yog tias lawv txawv, hloov hom sensor siv software lossis app.
- Kev ntsuas ntau yam tsis muaj kev lav phib xaub ntawm lub ntsuas cua kub-durability ntau. Thov xyuas qhov kub-durability ntau ntawm cov sensor siv.
- "Err" yuav tshwm sim nyob rau hauv cov zaub ntawm cov ntaub ntawv logger thaum lub sensor tsis tau txuas nrog, tau raug txiav los yog ib tug hlau tau tawg.
Tom ntej: PT Module PTM-3010
| Khoom ntsuas | Kub |
| Tshaj Tawm Sensors | Pt100 (3-xaim / 4-xaim), Pt1000 (3-xaim / 4-xaim) |
| Kev ntsuas ntau | -199 txog 600 ° C (nyob rau hauv lub sensor tshav kub-durability range xwb) |
| Kev ntsuas kev daws teeb meem | 0.1 ° C |
| Kev ntsuas qhov tseeb * | ± 0.3 ° C + 0.3% ntawm kev nyeem ntawv) ntawm 10 40 C ± ((0.5 ° C + 0.3% ntawm kev nyeem ntawv) ntawm -40 txog 10 ° 10 ° C, 40 txog 80 ° C |
| Kev sib txuas ntawm Sensor | Ntsia Hlau Clamp Terminal Thaiv: 3-Terminal |
| Kev ua haujlwm ib puag ncig | Kub: -40 txog 80 ° C Humidity: 90% RH lossis tsawg dua (tsis muaj condensation) |
| suav nrog | Kev tiv thaiv npog |
- Sensor yuam kev tsis suav nrog.
- Qhov ntsuas kub saum toj no [° C] yog rau qhov chaw ua haujlwm ntawm cov khoom siv nkag
Txuas Cov Sensor
- Loosen cov screws ntawm lub davhlau ya nyob twg thaiv.
- Xaub lub sensor cable terminals los ntawm lub input module tiv thaiv npog.
- Ntxig terminals A thiab B raws li daim duab qhia ntawm lub davhlau ya nyob twg thaiv thiab rov ua kom nruj dua.
Nyob rau hauv cov ntaub ntawv ntawm 4-xaim sensor, ib qho ntawm A nyob ntawm tej yuav raug txiav tawm. - Npog lub davhlau ya nyob twg thaiv dua nrog lub npog tiv thaiv
- Nco ntsoov tias hom sensor (100Ω lossis 1000Ω) yuav tsum tau txuas nrog lub tswv yim module, thiab hom sensor yuav tsum tau muab tso rau ntawm lub vijtsam LCD ntawm cov ntaub ntawv logger yog tib yam. Yog tias lawv txawv, hloov hom sensor siv lub software.
- Nco ntsoov txuas cov hlau lead kom raug raws li daim duab qhia ntawm lub davhlau ya nyob twg thaiv, thiab nruj nreem kaw cov ntsia hlau rau lub davhlau ya nyob twg thaiv.
- Ob lub "B" terminals tsis muaj polarity.
- Kev ntsuas ntau yam tsis muaj kev lav phib xaub ntawm lub ntsuas cua kub-durability ntau. Thov xyuas qhov kub-durability ntau ntawm cov sensor siv.
- "Err" yuav tshwm sim nyob rau hauv cov zaub ntawm cov ntaub ntawv logger thaum lub sensor tsis tau txuas nrog, tau raug txiav los yog ib tug hlau tau tawg.
4-20mA Module AIM-3010
| Khoom ntsuas | 4-20mA |
| Input Current Range | 0-20mA (Kev ua haujlwm txog 40mA) |
| Kev ntsuas kev daws teeb meem | 0.01 mA |
| Kev ntsuas qhov tseeb * | ± (0.05 mA + 0.3% ntawm kev nyeem ntawv) ntawm 10 txog 40 ° C ± (0.1 mA + 0.3% ntawm kev nyeem ntawv) ntawm -40 txog 10 ° C, 40 txog 80 ° C |
| Input Resistance | 1000 ± 0.30 |
| Kev sib txuas ntawm Sensor | Cable Insertion Connection: 2 ntxiv (+) parallel terminals thiab 2 minus (-) parallel terminals rau tag nrho ntawm 4 terminals |
| Compatible Wires | Ib leeg xaim: q) 0.32 rau ci> 0.65mm (AWG28 to AWG22) Pom zoo: o10.65mm (AWG22) Twisted hlau: 0.32mm2 (AWG22) thiab 0.12mm los yog ntau tshaj nyob rau hauv txoj kab uas hla strip ntev: 9 tol Omm |
| Kev ua haujlwm ib puag ncig | Kub: -40 txog 80 ° C Humidity: 90% RH lossis tsawg dua (tsis muaj condensation) |
- Qhov ntsuas kub saum toj no [° C] yog rau qhov chaw ua haujlwm ntawm cov khoom siv nkag.
Txuas Cov Sensor
Siv lub cuab yeej xws li lub hau ntswj los nias rau ntawm lub davhlau ya nyob twg khawm thiab ntxig cov hlau los ntawm lub qhov.
Example ntawm Sensor Connection
Nws tuaj yeem txuas lub sensor thiab voltage meter mus rau module tib lub sijhawm.
- Tsis txhob siv hluav taws xob tam sim no tshaj qhov input tam sim no. Ua li no tuaj yeem ua rau cov khoom siv hluav taws xob puas, ua rau kub lossis hluav taws tshwm sim.
- Thaum tshem tawm, tsis txhob quab yuam rub ntawm cov hlau, tab sis thawb rau ntawm lub pob kom ua tiav thaum txhim kho thiab maj mam rub cov hlau tawm ntawm lub qhov.
Voltage Module VIM-3010
| Khoom ntsuas | Voltage |
| Cov lus qhia Voltage Ntau yam | 0 txog 999.9mV, 0 txog 22V tawg Voltage: ± 28V |
| Kev ntsuas kev daws teeb meem | mus txog 400mV ntawm 0.1 mV txog 6.5V ntawm 2mV mus txog 800mV ntawm 0.2mV txog 9.999V ntawm 4mV mus txog 999mV ntawm 0.4mV txog 22V ntawm 10mV mus txog 3.2V ntawm 1mV |
| Kev ntsuas qhov tseeb * | ± (0.5 mV + 0.3% ntawm kev nyeem ntawv) ntawm 10 txog 40 ° C ± (1 mV + 0.5% ntawm kev nyeem ntawv) ntawm -40 txog 10 ° C, 40 txog 80 ° C |
| Input Impedance | mV Ntau: Txog 3M0 V Ntau Yam: Txog 1 MO |
| Preheat muaj nuj nqi | Voltage Ntau yam: 3V txog 20V100mA Lub Sijhawm Sijhawm: 1 txog 999 sec. (hauv units ntawm ib-thib ob) Load Capacitance: tsawg dua 330mF |
| Kev sib txuas ntawm Sensor | Cable Insertion txuas: 4-Terminal |
| Compatible Wires | Ib leeg xaim: V3.32 rau cA).65mm (AWG28 to AWG22) Pom zoo: 0.65mm (AWG22) Twisted hlau: 0.32mm2 (AWG22) thiab: 1,0.12rra los yog ntau tshaj hauv txoj kab uas hla: 9-10mm |
| Kev ua haujlwm ib puag ncig | Kub: -40 txog 80 ° C Humidity: 90% RH lossis tsawg dua (tsis muaj condensation) |
- Qhov ntsuas kub saum toj no [° C] yog rau qhov chaw ua haujlwm ntawm cov khoom siv nkag
Txuas Cov Sensor
Siv lub cuab yeej xws li lub hau ntswj los nias rau ntawm lub davhlau ya nyob twg khawm thiab ntxig cov hlau los ntawm lub qhov.
Example ntawm Sensor Connection
Nws tuaj yeem txuas lub sensor thiab voltage meter mus rau module tib lub sijhawm.
- Nws tsis tuaj yeem ntsuas qhov tsis zoo voltage nrog cov module no.
- Thaum lub teeb liab qhov chaw tso zis impedance siab, qhov nce yuam kev yuav tshwm sim vim qhov kev hloov pauv hauv input impedance.
- Voltage kom nkag mus rau "Preheat" yuav tsum yog 20V lossis qis dua. Inputting ib siab dua voltage tej zaum yuav ua rau kev puas tsuaj rau lub tswv yim module.
- Thaum lub preheat muaj nuj nqi tsis raug siv, tsis txhob txuas dab tsi rau "Preheat IN" lossis "Preheat OUT".
- Thaum siv lub preheat muaj nuj nqi, nws yog ib qhov tsim nyog hais tias cov zis teeb liab GND (-) thiab lub hwj chim GND (-) txuas ua ke.
- Lub sijhawm hloov tshiab ntawm LCD rau cov ntaub ntawv logger yog qhov pib ntawm 1 mus rau 10 vib nas this, tab sis thaum siv lub preheat muaj nuj nqi, LCD zaub yuav rov ua dua tshiab raws li lub sijhawm teev tseg hauv cov ntaub ntawv logger.
- Thaum koj tshem cov hlau lead ntawm VIM-3010, cov xov hlau tseem ceeb yuav raug nthuav tawm; ceev faj ntawm hluav taws xob shocks thiab/los yog luv luv Circuit Court.
- Thaum tshem tawm, tsis txhob quab yuam rub ntawm cov hlau, tab sis thawb rau ntawm lub pob kom ua tiav thaum txhim kho thiab maj mam rub cov hlau tawm ntawm lub qhov.
Pulse Input Cable PIC-3150
| Khoom ntsuas | Pulse suav |
| Lub tswv yim teeb liab: | Tsis yog voltage Tiv tauj Input Voltage Cov tswv yim (0-27V) |
| Ntes Tau Voltage | Lo: 0.5V lossis tsawg dua, Hi: 2.5V lossis ntau dua |
| Sib Tham Filter | ON: 15 Hz lossis tsawg dua OFF: 3.5 kHz lossis tsawg dua (thaum siv square wave signals ntawm 0-3V lossis siab dua) |
| Teb Polarity | Xaiv ib qho Lo—'Hi or Hi—, Lo |
| Qhov siab tshaj plaws | 61439 / Cov Ntaub Ntawv Teev Tseg |
| Input Impedance | Kwv yees li. 1001c0 ua |
- Thaum txuas lub cable rau cov khoom ntsuas, txhawm rau xaim kom zoo xyuas kom phim lub davhlau ya nyob twg polarities (RD +, BK -).
Cov ntaub ntawv / Cov ntaub ntawv
 |
TANDD RTR505B Input Module [ua pdf] Tus neeg siv phau ntawv RTR-505B, TR-55i, RTR-505, Input Module |
