TANDD RTR505B Input Module User Manual
Pele o sebelisa sehlahisoa, ka kopo hokela ferrite core * e fanoeng thapong haufi le mojule ho fana ka khatello ea lerata.
Litaba
pata
Litemoso mabapi le ho sebelisa Input Modules
- Ha re ikarabelle bakeng sa tšenyo leha e le efe e bakoang ke ho hokela ho data logger ntle le tse thathamisitsoeng e le tse tsamaellanang.
- Se ke oa arola, oa lokisa kapa oa fetola module ea ho kenya le thapo ea eona.
- Li-module tsena tsa ho kenya ha li kenelle metsi. U se ke ua li lumella hore li be metsi.
- Se ke oa khaola kapa ua sotha thapo ea khokahanyo, kapa ua tsoka thapo ho pota-pota ka ho hoketsoe logger.
- U se ke ua pepesa tšusumetso e matla.
- Haeba ho na le mosi leha e le ofe, monko o makatsang kapa melumo e tsoang mojuleng oa ho kenya, hang-hang khaotsa ho e sebelisa.
- Se ke oa sebelisa kapa ua boloka lisebelisoa tsa ho kenya libakeng tse kang tse thathamisitsoeng ka tlase. E ka baka ho se sebetse hantle kapa likotsi tse sa lebelloang.
- Libaka tse hlasetsoeng ke letsatsi le tobileng
- Metsing kapa dibakeng tse nang le metsi
- Libaka tse pepesehileng lihlapolli tsa tlhaho le khase e senyang
- Libaka tse pepesehetseng matla a khoheli a matla
- Libaka tse nang le motlakase o tsitsitseng
- Libaka tse haufi le mollo kapa tse pepesehileng mocheso o feteletseng
- Libaka tse nang le lerole kapa mosi o feteletseng
- Libaka tse ka finyelloang ke bana ba banyenyane
- Haeba o kenya sebaka sa mojule oa ho kenya o nang le li-setting tsa litokiso, etsa bonnete ba hore o etsa li-setting life kapa life tseo u li batlang.
- Ha o sebelisa RTR505B mme o etsa liphetoho mofuteng oa mojule oa ho kenya kapa thapo, hoa hlokahala ho qala logger ea data le ho etsa litlhophiso tsohle tse lakatsehang.
Thermocouple Module TCM-3010
| Ntho ea Tekanyo | Mocheso | |
| E hlahlobang e hlahlobang | Thermocouple: Mofuta oa K, J, T, S | |
| Tekanyo Range | Mofuta oa K : -199 ho 1370°C Mofuta oa T : -199 ho isa 400°C Mofuta J : -199 ho 1200°C Mofuta oa S : -50 ho 1760°C |
|
| Tekanyo Qeto | Mofuta oa K, J, T: 0.1°C Mofuta oa S : Hoo e ka bang. 0.2°C | |
| Ho Lekanya ho Nepaha* | Puseletso ea Cold Junction | ±0.3 °C ho 10 ho isa ho 40 °C ±0.5 °C ho -40 ho 10 °C, 40 ho 80 °C |
| Tekanyo ea Thermocouple | Mofuta oa K, J, T : ±(0.3 °C + 0.3 % ea ho bala) Mofuta oa 5 : ±( 1 °C + 0.3 % ea ho bala) | |
| Khokahano ea Sensor | Etsa bonnete ba hore o sebelisa sensor ea thermocouple e nang le plug e nyane ea thermocouple e kentsoeng. T&D ha e rekise li-plug kapa lisensara tsena. | |
| Tikoloho ya Tshebetso | Mocheso: -40 ho isa ho 80°C Mongobo: 90% RH kapa ka tlase (ha ho condensation) |
|
- Phoso ea kutlo ha e kenyelelitsoe.
- Lithempereichara tse ka holimo [°C] ke tsa tikoloho ea ts'ebetso ea mojule oa ho kenya.
Ho kopanya Sensor
- Sheba mofuta oa sensor le polarity (hammoho le matšoao a ho tlosa).
- Kenya sehokelo se senyane sa thermocouple, se tsamaellanang joalo ka ha ho bonts'itsoe mojuleng oa ho kenya.
Ha o kenya sensor ka har'a mojule oa ho kenya, etsa bonnete ba hore o bapisa matšoao a ho kopanya le ho tlosa sehokelong sa sensor le a moduleng.- Setsebi sa data se lemoha ho khaoha hoo e ka bang metsotsoana e meng le e meng ea 40, ho etsa hore e bontše mocheso o fosahetseng ka ho toba ka mor'a hore sehokelo se tlosoe.
- Etsa bonnete ba hore mofuta oa thermocouple (K, J, T, kapa S) oa sensor o tla kopanngoa le mochine oa ho kenya, le mofuta oa sensor o lokelang ho bontšoa skrineng sa LCD sa logger ea data e tšoana. Haeba li fapane, fetola mofuta oa sensor o sebelisa software kapa app.
- Lethathamo la litekanyo ha se tiisetso ea mofuta oa mocheso o tšoarellang oa sensor. Ka kopo, sheba mofuta oa ho tšoarella ha mocheso oa sensor e sebelisoang.
- "Phoso" e tla hlaha ponts'ong ea data logger ha sensor e sa kopanngoa, e khaotsoe kapa mohala o robehile.
PT Module PTM-3010
| Ntho ea Tekanyo | Mocheso |
| E hlahlobang e hlahlobang | PT100 (3-terata / 4-terata), Pt1000 (3-terata / 4-terata) |
| Tekanyo Range | -199 ho isa ho 600°C (ka har'a sebaka sa ho tšoarella ha mocheso oa sensor feela) |
| Tekanyo Qeto | 0.1°C |
| Ho Lekanya ho Nepaha* | ±0.3 °C + 0.3 % ea ho bala) ho 10 40 C ±((0.5 °C + 0.3 % ea ho bala) ho -40 ho isa ho 10° 10°C, 40 ho isa ho 80°C |
| Khokahano ea Sensor | Screw Clamp Thibelo ea terminal: 3-terminal |
| Tikoloho ya Tshebetso | Mocheso: -40 ho isa ho 80°C Mongobo: 90% RH kapa ka tlase (ha ho condensation) |
| Kenyellelitsoe | Sekoaelo sa Tšireletso |
- Phoso ea kutlo ha e kenyelelitsoe.
- Lithempereichara tse ka holimo [°C] ke tsa tikoloho ea ts'ebetso ea mojule oa ho kenya
Ho kopanya Sensor
- Lokolla likurufu tsa boloko ba theminale.
- Tsamaisa li-terminals cable cable ka har'a sekoaelo sa ts'ireletso sa module oa ho kenya.
- Kenya li-terminals A le B ho latela setšoantšo se bontšitsoeng bolokong ba theminale ebe u tiisa li-screw hape.
Tabeng ea sensor ea terata e 4, e 'ngoe ea likhoele tsa A e tla sala e khaotsoe. - Koahela block block hape ka sekoaelo se sireletsang
- Etsa bonnete ba hore mofuta oa sensor (100Ω kapa 1000Ω) o tla hokahanngoa le mojule oa ho kenya, le mofuta oa sensor o tla hlahisoa skrineng sa LCD sa data logger lia tšoana. Haeba li fapane, fetola mofuta oa sensor u sebelisa software.
- Etsa bonnete ba hore o hokela lithapo tsa loto ka nepo ho latela sets'oants'o se bonts'itsoeng bolokong ba theminale, 'me u tiise li-screws ka mokhoa o sireletsehileng block block.
- Li-terminals tse peli tsa "B" ha li na polarity.
- Lethathamo la litekanyo ha se tiisetso ea mofuta oa mocheso o tšoarellang oa sensor. Ka kopo, sheba mofuta oa ho tšoarella ha mocheso oa sensor e sebelisoang.
- "Phoso" e tla hlaha ponts'ong ea data logger ha sensor e sa kopanngoa, e khaotsoe kapa mohala o robehile.
4-20mA Mojule oa AIM-3010
| Ntho ea Tekanyo | 4-20mA |
| Kenya Range ea Hona Joale | 0 ho 20mA (E sebetsa ho fihlela ho 40mA) |
| Tekanyo Qeto | 0.01 mA |
| Tekanyo e Nepahetseng* | ±(0.05 mA + 0.3 % ea ho bala) ho 10 ho isa ho 40 °C ±(0.1 mA + 0.3 % ea ho bala) ho -40 ho 10 °C, 40 ho 80 °C |
| Kena Khahlano | 1000 ±0.30 |
| Khokahano ea Sensor | Khokelo ea ho Kena ha Cable: 2 mmoho (+) litheminale tse bapileng le tse 2 ho tlosa (-) liteminale tse bapileng bakeng sa kakaretso ea liteminale tse 4 |
| Lithapo Tse Lumellanang | Mohala o le mong: q)0.32 ho ci>0.65mm (AWG28 ho AWG22) E khothaletsoa: o10.65mm(AWG22) Terata e sothehileng: 0.32mm2(AWG22) le 0.12mm kapa ho feta ka bophara Bolelele ba Strip: 9 tol Omm |
| Tikoloho ya Tshebetso | Mocheso: -40 ho isa ho 80°C Mongobo: 90% RH kapa ka tlase (ha ho condensation) |
- Lithempereichara tse ka holimo [°C] ke tsa tikoloho ea ts'ebetso ea mojule oa ho kenya.
Ho kopanya Sensor
Sebelisa sesebelisoa se kang screwdriver ho tobetsa konopo ea "terminal" ebe o kenya mohala ka lesoba.
Example ea Khokahano ea Sensor
Hoa khoneha ho hokahanya sensor le voltagmitha ho mojulung ka nako e le 'ngoe.
- Se ke oa sebelisa motlakase o fetang tekanyo ea hona joale ea ho kenya. Ho etsa joalo ho ka senya mojule oa ho kenya, ho baka mocheso kapa mollo.
- Ha u tlosa, u se ke ua hula terata ka likhoka, empa u tobetse konopo joalokaha u entse ha u kenya, 'me ka bonolo u hule terata ka lesoba.
MoqtagSetšoantšo sa VIM-3010
| Ntho ea Tekanyo | Moqtage |
| Keletso Voltage Range | 0 ho 999.9mV, 0 ho 22V Karohano ea Voltage: ±28V |
| Tekanyo Qeto | ho fihla ho 400mV ho 0.1 mV ho fihla ho 6.5V ho 2mV ho fihla ho 800mV ho 0.2mV ho fihla ho 9.999V ho 4mV ho fihla ho 999mV ho 0.4mV ho fihla ho 22V ho 10mV ho fihla ho 3.2V ho 1 mV |
| Ho Lekanya ho Nepaha* | ±(0.5 mV + 0.3 % ea ho bala) ho 10 ho isa ho 40 °C ±(1 mV + 0.5 % ea ho bala) ho -40 ho 10 °C, 40 ho 80 °C |
| Kena Impedans | mV Range: Ka 3M0 V Range: Hoo e ka bang 1 MO |
| Mosebetsi oa Preheat | Moqtage Range: 3V ho 20V100mA Nako ea nako: 1 ho 999 sec. (ka liyuniti tsa motsotsoana o le mong) Bokhoni ba Mojaro: tlase ho 330mF |
| Khokahano ea Sensor | Khokahano ea ho Kena ha Cable: 4-terminal |
| Lithapo Tse Lumellanang | Khoele e le 'ngoe: V3.32 ho ea ho cA).65mm (AWG28 ho ea ho AWG22) E khothaletsoa: 0.65mm (AWG22) Terata e sothehileng: 0.32mm2(AWG22) le :1,0.12rra kapa ho feta ka bophara Bolelele ba Strip: 9 to10mm |
| Tikoloho ya Tshebetso | Mocheso: -40 ho isa ho 80°C Mongobo: 90% RH kapa ka tlase (ha ho condensation) |
- Lithempereichara tse ka holimo [°C] ke tsa tikoloho ea ts'ebetso ea mojule oa ho kenya
Ho kopanya Sensor
Sebelisa sesebelisoa se kang screwdriver ho tobetsa konopo ea "terminal" ebe o kenya mohala ka lesoba.
Example ea Khokahano ea Sensor
Hoa khoneha ho hokahanya sensor le voltagmitha ho mojulung ka nako e le 'ngoe.
- Ho ke ke ha khoneha ho metha negative voltage le mojule ona.
- Ha impedance e hlahisoang ke mohloli oa lets'oao e phahame, phoso ea phaello e tla etsahala ka lebaka la phetoho ea impedance ea ho kenya.
- Moqtage ho kenya letsoho ho "Preheat" e lokela ho ba 20V kapa ka tlase. Ho kenya molumo o phahamengtage ka baka tšenyo ho mojule oa ho kenya.
- Ha mosebetsi oa preheat o sa sebelisoe, u se ke ua hokela letho ho "Preheat IN" kapa "Preheat OUT".
- Ha o sebelisa ts'ebetso ea preheat, hoa hlokahala hore lets'oao la tlhahiso GND (-) le matla a GND (-) li hokahane hammoho.
- Nako ea ho khatholla ea LCD bakeng sa logger ea data ha e le hantle e tloha metsotsoana e 1 ho isa ho e 10, empa ha u sebelisa mosebetsi oa preheat pontšo ea LCD e tla tsosolosoa ho latela nako ea ho rekota e behiloeng ho data logger.
- Ha o tlosa likhoele tse etellang pele ho VIM-3010, likhoele tsa mantlha li tla pepesoa; ela hloko litšupiso tsa motlakase le/kapa li-circuits tse khutšoane.
- Ha u tlosa, u se ke ua hula terata ka likhoka, empa u tobetse konopo joalokaha u entse ha u kenya, 'me ka bonolo u hule terata ka lesoba.
Pulse Input Cable PIC-3150
| Ntho ea Tekanyo | Palo ea Pulse |
| Pontšo ea ho kenya: | Non-voltage Contact Input Voltage Kenyo (0 ho isa ho 27 V) |
| Ho lemoha Moqtage | Lo: 0.5V kapa ka tlase ho moo, Hi: 2.5V kapa ho feta |
| Sefe ea Chattering | ON: 15 Hz kapa ka tlase TIMA: 3.5 kHz kapa ka tlase ho moo (ha o sebelisa matshwao a square wave a 0-3V kapa ho feta) |
| Karabelo Polarity | Khetha Lo—'Hi kapa Hi—,Lo |
| Boholo ba Palo | 61439 / Nako ea ho Rekota |
| Kena Impedans | Hoo e ka bang. 1001c0 hula holimo |
- Ha o kopanya mohala ho ntho ea ho lekanya, e le hore o ka terata hantle etsa bonnete ba hore o lumellana le polarities ea terminal (RD +, BK -).
Litokomane / Lisebelisoa
 |
TANDD RTR505B Mojule oa ho Kena [pdf] Bukana ea Mosebelisi RTR505B, TR-55i, RTR-505, Mojule oa ho Kena |
