I-SOLAX 0148083 BMS i-Parallel Box-II yoQhagamshelwano oluFanayo lweMitya yebhetri ye-2

Uludwe lokuPakisha (i-BMS Parallel Box-II)

Phawula: IsiKhokelo sokuFakelo oluKhawulezayo sichaza ngokufutshane amanyathelo ofakelo afunekayo. Ukuba unayo nayiphi na imibuzo, jonga kwiNcwadi yoFakelo ngolwazi oluthe vetshe.

Intambo yoMbane (-) x1(2m) Intambo yoMbane (+) x1(2m)	Intambo yoMbane (-) x2(1m) Intambo yoMbane (+) x2(1m)	RS485 Intambo x2(1m) CAN Intambo x1(2m)
Ujikelezo Wrenchx1 Isixhobo sokuqhaqha intambo yamandla x1	Ukwandiswa screwx2	Ukwandiswa ityhubhu2
Itheminali yeRingi x1 I-Grounding Nutx1	INcwadana yoFakelo x1	Isikhokelo sokuFakela ngokukhawuleza x1

Izikhululo ze-BMS Parallel Box-II

Into	Into	Inkcazo
I	RS485-1	Unxibelelwano lwemodyuli yebhetri yeqela loku-1
II	B1+	Isidibanisi B1+ seBhokisi ukuya + kwimodyuli yebhetri yeqela loku-1
III	B2-	Isidibanisi B1- seBhokisi ukuya kwimodyuli yebhetri yeqela loku-1
IV	RS485-2	Unxibelelwano lwemodyuli yebhetri yeqela loku-2
V	B2+	Isidibanisi B2+ seBhokisi ukuya + kwimodyuli yebhetri yeqela loku-2
VI	B2-	Isidibanisi B2- seBhokisi ukuya kwimodyuli yebhetri yeqela loku-2
VII	IBAT +	Isidibanisi i-BAT+ yeBhokisi ukuya kwi-BAT+ ye-inverter
VII	BAT-	Isidibanisi BAT- of Box ukuya BAT- of inverter
IX	INGENZA	Isidibanisi i-CAN yeBhokisi ukuya kwi-CAN ye-inverter
X	/	Ivalufa yomoya
XI		GND
XII	LAYITA ICIMA	Umephuli wojikelezo
XIII	AMANDLA	Iqhosha laMandla
XIV	DIP	Ukutshintsha kwe-DIP

Iimfuno zoFakelo

Qinisekisa ukuba indawo yofakelo ihlangabezana nale miqathango ilandelayo:

• Esi sakhiwo siyilelwe ukuba simelane neenyikima
• Indawo ikude nolwandle ukunqanda amanzi anetyuwa kunye nokufuma, ngaphezu kwe-0.62 yeekhilomitha
• Umgangatho uthe tyaba kwaye uphakamile
• Akukho zixhobo ezinokutsha okanye eziqhumayo, ubuncinane be-3ft
• I-ambience inomthunzi kwaye ipholile, kude nobushushu kunye nelanga elithe ngqo
• Ubushushu kunye nokufuma kuhlala kwinqanaba elingatshintshiyo
• Kukho uthuli oluncinci kunye nokungcola kwindawo
• Akukho zigesi ezityiwayo ezikhoyo, kubandakanywa iammonia kunye nomphunga weasidi
• Apho itshaja kwaye ikhutshwa, iqondo lobushushu le-ambient lisuka kwi-32°F ukuya kwi-113°F.

Enyanisweni, iimfuno zofakelo lwebhetri zinokwahluka ngenxa yokusingqongileyo kunye neendawo. Kwimeko enjalo, landelela iimfuno zemithetho kunye nemigangatho yendawo.

PHAWULA! Imodyuli yebhetri yeSolax ibekwe kwi-IP55 kwaye ke inokufakwa ngaphandle nangaphakathi. Nangona kunjalo, ukuba ifakwe ngaphandle, musa ukuvumela ipakethe yebhetri ukuba ibonakale kwilanga elithe ngqo kunye nokufuma.

PHAWULA! Ukuba ubushushu be-ambient bungaphezulu koluhlu lokusebenza, ipakethi yebhetri iya kuyeka ukusebenza ukuze izikhusele. Olona luhlu lobushushu bokusebenza luyi-15°C ukuya kuma-30°C. Ukuvezwa rhoqo kumaqondo obushushu arhabaxa kungonakalisa ukusebenza kunye nobomi bemodyuli yebhetri.

PHAWULA! Xa ufaka ibhetri okokuqala, umhla wokuvelisa phakathi kweemodyuli zebhetri akufanele kudlule iinyanga ezi-3.

Ukufakela ibhetri

• Isibiyeli kufuneka sisuswe kwibhokisi.
  
• Tshixa ikhonkco phakathi kwebhodi yokuxhoma kunye nesibiyeli sodonga ngezikrufu ze-M5. (itorque (2.5-3.5)Nm)
  
• Gqoka imingxuma emibini nge-driller
• Ubunzulu: ubuncinane yi-3.15in
  
• Tshatisa ibhokisi kunye nesibiyeli. Izikrufu zeM4. (itorque:(1.5-2)Nm)
  

Ngaphezuluview yoFakelo

PHAWULA!

• Ukuba ibhetri ayisetyenziswanga ngaphezu kweenyanga ezili-9, ibhetri kufuneka itshajelwe ubuncinane kwi-SOC 50 % ngexesha ngalinye.
• Ukuba ibhetri itshintshiwe, iSOC phakathi kweebhetri ezisetyenzisiweyo kufuneka ingqinelane kangangoko kunokwenzeka, ibe nowona mahluko mkhulu ±5%.
• Ukuba ufuna ukwandisa umthamo wenkqubo yebhetri yakho, nceda uqinisekise ukuba umthamo wenkqubo yakho ekhoyo ye-SOC imalunga nama-40%. Ibhetri yokwandisa kufuneka iveliswe kwiinyanga ezi-6; Ukuba ngaphezulu kweenyanga ezi-6, tshaja kwakhona imodyuli yebhetri ukuya malunga ne-40%.
  

Ukuqhagamshela iiCables kwi-Inverter

Inyathelo l. Qhuba intambo (A/B:2m) ukuya kwi-15mm.

Ibhokisi kwi-Inverter:
I-BAT+ ukuya kwi-BAT+;
BAT- ukuya BAT-;
I-CAN ukuya kwi-CAN

Inyathelo loku-2. Faka intambo ehlutshiweyo ukuya kwindawo yokumisa (intambo engalunganga yeplagi ye-DC (-) kunye
intambo elungileyo ye DC socket(+) ziphila). Bamba indlu kwisikrufu
uqhagamshelwano.

Inyathelo loku-3. Cinezela phantsi i-cl yasentwasahloboamp ide icofe ngokuvakalayo endaweni (Kuya kufuneka ukwazi ukubona imisonto ye wie ecocekileyo kwigumbi)

Inyathelo loku-4. Qinisa udibaniso lwesijirufu(itorque yokuqinisa:2.0±0.2Nm)

Ukuqhagamshela kwiiModyuli zebhetri

Imodyuli yebhetri ukuya kwimodyuli yebhetri

Imodyuli yebhetri kwimodyuli yebhetri(Fumana iintambo ngombhobho):

1. "YPLUG" kwicala lasekunene le-HV11550 ukuya kwi "XPLUG" kwicala lasekhohlo lemodyuli yebhetri elandelayo.
2. “-” kwicala lasekunene le-HV11550 ukuya “+” kwicala lasekhohlo lemodyuli yebhetri elandelayo.
3. "RS485 I" kwicala lasekunene le-HV11550 ukuya kwi "RS485 II" kwicala lasekhohlo lemodyuli yebhetri elandelayo.
4. Ezinye iimodyuli zebhetri zixhunyiwe ngendlela efanayo.
5. Faka intambo edibeneyo yochungechunge kwi "-" kunye ne "YPLUG" kwicala lasekunene lemodyuli yokugqibela yebhetri ukwenza isiphaluka esipheleleyo.
   

UQhagamshelo lweCable yoNxibelelwano

YeBhokisi:
Faka enye isiphelo sentambo yonxibelelwano ye-CAN ngaphandle kwentambo yentambo ngqo kwi-CAN port ye-Inverter. Hlanganisa i-cable gland kwaye uqinise i-cap cable.

Iimodeli zebhetri:
Xhuma inkqubo yonxibelelwano ye-RS485 II kwicala lasekunene ukuya kwi-RS485 I yemodyuli yebhetri elandelayo kwicala lasekhohlo.
Phawula: Kukho isigqubuthelo sokhuselo se-RS485 isidibanisi. Khulula isiciko kunye neplagi enye ekupheleni kwentambo yonxibelelwano ye-RS485 kwisidibanisi se-RS485. Qinisa iplastic screw nut ebekwe kwintambo ngesitshixo sokujikeleza.

uQhagamshelwano loMhlaba

Indawo yesiphelo yoqhagamshelo lwe-GND iboniswe ngezantsi (itorque:1.5Nm):

PHAWULA!
Uqhagamshelwano lwe-GND lunyanzelekile!

Ugunyaziso

Ukuba zonke iimodyuli zebhetri zifakiwe, landela la manyathelo ukuyibeka ekusebenzeni

1. Qwalasela i-DIP kwinani elihambelanayo ngokwenani lemodyuli yebhetri (e) efakiweyo.
2. Susa ibhodi yokugubungela ibhokisi
3. Hambisa i-breaker circuit switch kwindawo ye-ON
4. Cofa iqhosha elithi POWER ukuvula ibhokisi
5. Phinda ufake ibhodi yokugubungela kwibhokisi
6. Vula iswitshi ye-AC yokuguqula
   

Ulungelelwaniso luvulwe sisiguquli ::
0- Ukutshatisa iqela elinye lebhetri (iqela 1 okanye iqela2)
1- Ukutshatisa omabini amaqela ebhetri (iqela 1 kunye neqela2).

 PHAWULA!
Ukuba iswitshi ye-DIP ngu-1, inani leebhetri kwiqela ngalinye kufuneka lifane.

Amaxwebhu / Izibonelelo

I-SOLAX 0148083 BMS i-Parallel Box-II yoQhagamshelwano oluFanayo lweMitya yebhetri ye-2 [pdf] Isikhokelo soFakelo I-0148083, i-BMS Parallel Box-II yoQhagamshelwano oluFanayo lwe-2 yeBattery Strings, 0148083 BMS Parallel Box-II yoQhagamshelwano oluFanayo lwe-2 yeBattery Strings.

Iimbekiselo

• Incwadi yokusebenzisa