I-lcs+340/F/A I-Ultrasonic Proximity Switch enePhumo elinye lokuTshintsha kunye ne-IO-Link
Incwadi yokusebenzisa 
Incwadana yokusebenza
Ultrasonic ukusondela switsha nge imveliso enye yokutshintsha kunye ne-IO-Link
lcs+340/F/A
lcs+600/F/A
Ingcaciso yeMveliso
I-sensor ye-lcs + inikezela ngomlinganiselo ongaqhagamshelwanga womgama ukuya kwinto ekufuneka ibekwe ngaphakathi kwendawo yokubona i-sensor.
Isiphumo sokutshintsha sisetwa ngokwemiqathango kumgama ochongiweyo wokubona umgama. Ngenkqubo ye-Teach-in, umgama wokubona umgama kunye nemo yokusebenza inokulungiswa. I-LED enye ibonisa ukusebenza kunye nemeko yesiphumo sokutshintsha.
Iinzwa ze-lcs + ziyi-IO-Link-ekwaziyo ngokuhambelana ne-IO-Link yenkcazo ye-V1.1 kunye nenkxaso ye-Smart Sensor Pro.file njengeSensom yoMlinganiso yeDijithali.
Amanqaku okhuseleko
- Funda incwadi yokusebenza phambi kokuba uqalise.
- Uqhagamshelo, ufakelo kunye nohlengahlengiso lunokwenziwa kuphela ngabasebenzi abaqeqeshiweyo.
- Akukho candelo lokhuseleko ngokuhambelana ne-EU Machine Directive, ukusetyenziswa kwindawo yokhuseleko lomntu kunye nomatshini akuvumelekanga.
Ukusetyenziswa Ngokufanelekileyo
I-lcs + izinzwa ze-ultrasonic zisetyenziselwa ukuchongwa kwezinto ezingadibanisiyo.
 |
 |
umbala |
| 1 | +UB | ntsundu |
| 3 | –UB | luhlaza |
| 4 | F | mnyama |
| 2 | – | mhlophe |
| 5 | Sync/Com | ngwevu |
Umzobo 1: Pin isabelo nge view kwiplagi yesivamvo kunye nekhowudi yombala yeentambo zoqhagamshelo lwemicrosonic
Ukuhlohla
- Yifake inzwa kwindawo yokulinganisa.
- Qhagamshela intambo yoqhagamshelo kwiplagi yesixhobo seM12, jonga umfanekiso 1.
Ukuqala eqala
- Qhagamshela unikezelo lwamandla.
- Cwangcisa iiparamitha zenzwa, jonga iSazobe soku-1.
Ulungiselelo lwasefektri
- Ukutshintsha imveliso kwi-NOC
- Khangela umgama kuluhlu lokusebenza
Iindlela zokuSebenza
Iimowudi ezintathu zokusebenza ziyafumaneka kwimveliso yokutshintsha:
- Ukusebenza kwindawo enye yokutshintsha
Isiphumo sokutshintsha sisetwa xa into iwela ngaphantsi kwendawo yokutshintsha. - Imo yefestile
Isiphumo sokutshintsha sisetwa xa into ingaphakathi kwemida yefestile. - Umqobo obonakalisa iindlela ezimbini
Isiphumo sokutshintsha sisetwa xa into iphakathi koluvo kunye nesibonisi esisisigxina.
 |
 |
|
| lcs+340... | 2.00 m | 18.00 m |
| lcs+600... | 4.00 m | 30.00 m |
Umzobo 2: Imigama encinci yendibano ngaphandle kongqamaniso
Umzobo 1: Seta iiparameters zenzwa ngokusebenzisa inkqubo yokufundisa
Ungqamaniso
Ukuba umgama wendibano yeenzwa ezininzi ziwela ngaphantsi kwamaxabiso aboniswe kuMfanekiso 2, ulungelelwaniso lwangaphakathi kufuneka lusetyenziswe. Ngenxa yale njongo seta iziphumo zokutshintsha kwazo zonke izinzwa ngokuhambelana noMzobo 1. Ekugqibeleni udibanise i-pin nganye ye-5 ye-sensors ukuba ihambelane.
Isondlo
abenzi boluvo be-microsonic azinasondlo. Kwimeko yokungcola okugqithisileyo kwekhekhe sincoma ukuba ucoce umphezulu woluvo omhlophe.
Amanqaku
- Iinzwa zeentsapho ze-lcs + zinendawo eyimfama, apho umlinganiselo womgama ungenakwenzeka.
- Iinzwa ze-lcs + zixhotyiswe ngembuyekezo yobushushu bangaphakathi. Ngenxa yezinzwa zokuzifudumeza ngokwazo, imbuyekezo yeqondo lobushushu ifikelela kweyona ndawo ilungileyo yokusebenza emva kwe-approx. Imizuzu engama-30 yokusebenza.
- Kwimowudi yokusebenza eqhelekileyo, i-LED ekhanyisiweyo etyheli ibonakalisa ukuba ukuphuma kokutshintsha kutshintshiwe.
- Abenzi boluvo be-lcs+ banemveliso yokutshintsha ukutyhala.
- Kwi-"Indlela ezimbini zokubonisa umqobo« indlela yokusebenza, into kufuneka ibe phakathi koluhlu lwe-0-85 % yomgama omiselweyo.
- Kwi »Seta indawo yokubona – indlela A« Fundisa-kwinkqubo owona mgama ukuya kwinto ifundiswa kwinzwa njengenqaku lokubona. Ukuba into ihambela ngakwisixhobo soluvo (umzekelo ngolawulo lwenqanaba) ngoko umgama ofundisiweyo linqanaba apho isivamvo kufuneka sitshintshe isiphumo.
- Ukuba into eza kuskenwa ishukuthela kwindawo yokukhangela ukusuka kwicala, i »Seta indawo yokubona +8 % – indlela B« Inkqubo yokufundisa kufuneka isetyenziswe. Ngale ndlela umgama wokutshintsha umiselwe i-8% ngaphezulu kunowona mgama ulinganisiweyo ukuya kwinto. Oku kuqinisekisa umgama wokutshintsha othembekileyo nokuba ubude bezinto buhluka kancinci.
Idatha yobugcisa
 |
 |
 |
| indawo eyimfama | 0 ukuya ku-350 mm | 0 ukuya ku-600 mm |
| uluhlu lokusebenza | 3,400 mm | 6,000 mm |
| uluhlu oluphezulu | 5,000 mm | 8,000 mm |
| i-engile yokwandiswa komqadi | bona iindawo zokubona | bona iindawo zokubona |
| i-transducer frequency | 120 kHz | 80 kHz |
| isisombululo | 0.18 mm | 0.18 mm |
| ukuvelisa kwakhona | ±0.15% | ±0.15% |
| iindawo zokubona kwizinto ezahlukeneyo: Iindawo ezingwevu ezimnyama zimele ummandla apho kulula ukuqaphela isibonisi esiqhelekileyo (ibha engqukuva). Oku kubonisa uluhlu oluqhelekileyo lokusebenza lwabenzi boluvo. Iindawo ezingwevu ezikhanyayo zimela indawo apho isibonisi esikhulu kakhulu-se umzekelo ipleyiti – isenako ukuqatshelwa. Imfuno apha yeyolungelelwaniso oluphezulu kuluvo. Akunakwenzeka ukuvavanya ukubonakaliswa kwe-ultrasonic ngaphandle kwale ndawo. |
 |
 |
| ukuchaneka | ±1 % (ubushushu bubuyekezwe ngaphakathi; ingenziwa ingasebenzi 1) , 0,17 %/K ngaphandle kwembuyekezo) |
±1 % (ubushushu bubuyekezwe ngaphakathi; ingenziwa ingasebenzi 1) , 0,17 %/K ngaphandle kwembuyekezo) |
| Ukusebenza voltage-UB | I-9 ukuya kwi-30 V DC, ukukhuselwa kwe-polarity umva | I-9 ukuya kwi-30 V DC, ukukhuselwa kwe-polarity umva |
| Umqulutage ripple | ±10% | ±10% |
| akukho-mthwalo ukusetyenziswa kwangoku | ≤60 mA | ≤60 mA |
| izindlu | iPBT, iPolyester; I-ultrasonic transducer: i-polyurethane foam, i-epoxy resin enomxholo weglasi |
iPBT, iPolyester; I-ultrasonic transducer: i-polyurethane foam, i-epoxy resin enomxholo weglasi |
| iklasi yokhuseleko nge-EN 60529 | IP67 | IP67 |
| uhlobo loqhagamshelwano | Iplagi ye-5-pin ye-M12 setyhula, i-PBT | Iplagi ye-5-pin ye-M12 setyhula, i-PBT |
| ulawulo | 2 amaqhosha-push | 2 amaqhosha-push |
| iyacwangciseka | Fundisa nge-push-qhosha LCA-2 kunye LinkControl, IO-Link |
Fundisa nge-push-qhosha LCA-2 kunye LinkControl; IO-Link |
| izalathisi | Ii-LED ezi-2 ezityheli / eziluhlaza (ukutshintsha iseti yemveliso/ayimiselwanga) |
Ii-LED ezi-2 ezityheli / eziluhlaza (ukutshintsha iseti yemveliso/ayimiselwanga) |
| ungqamaniso | ungqamaniso lwangaphakathi ukuya kuthi ga kwi-10 sensors | ungqamaniso lwangaphakathi ukuya kuthi ga kwi-10 sensors |
| ubushushu bokusebenza | –25 ukuya kuma- + 70 ° C | –25 ukuya kuma- + 70 ° C |
| ubushushu bokugcina | –40 ukuya kuma- + 85 ° C | –40 ukuya kuma- + 85 ° C |
| ubunzima | 180 g | 240 g |
| ukutshintsha i-hysteresis1) | 50 mm | 100 mm |
| Ukutshintsha amaza 1) | 4 Hz | 3 Hz |
| ixesha lokuphendula1) | 172 ms | 240 ms |
| ukulibaziseka kwexesha phambi kokufumaneka1) | <380 ms | <450 ms |
| ukuhambelana kwesiqhelo | EN 60947-5-2 | EN 60947-5-2 |
| umyalelo no. | lcs+340/F/A | lcs+340/F/A |
| imveliso yokutshintsha |
1) Inokucwangciswa nge-LinkControl kunye ne-IO-Link.
Umzobo 3: Ukuseta indawo yokubhaqa kwiindlela ezahlukeneyo zokushukuma kwento
- Uluvo lunokusetwa kwakhona kwisetingi yefektri (bona "Ezinye iisetingi«).
- Ukusebenzisa i-adaptha ye-LinkControl (i-accessory yokuzikhethela) kunye ne-software ye-LinkControl ye-Windows®, zonke i-Teach-in kunye nesetingi ezongezelelweyo zeparameter ye-sensor zingenziwa ngokuzikhethela.
- IODD yamva nje file kunye nolwazi malunga nokuqalisa kunye nokucwangciswa kwee-lcs + zoluvo nge-IO-Link, uya kufumana kwi-intanethi apha: www.microsonic.de/lcs+.
- Ngolwazi oluthe vetshe nge-IO-Link bona www.io-link.com.
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / eJamani
T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Umxholo wolu xwebhu uxhomekeke kwiinguqu zobugcisa.
Iinkcukacha kolu xwebhu zinikezelwe ngendlela echazayo kuphela.
Abagunyazisi naziphi na iimpawu zemveliso.
Amaxwebhu / Izibonelelo
 |
I-microsonic lcs+340/F/A Ultrasonic Proximity Switch kunye nePhumo elinye lokuTshintsha kunye ne-IO-Link [pdf] Incwadi yokusebenzisa I-lcs 340 FA I-Ultrasonic Proximity Switch kunye ne-One Switching Output kunye ne-IO-Link, i-lcs 340 FA, i-Ultrasonic Proximity Switch kunye nePhumo elinye lokuTshintsha kunye ne-IO-Link, i-Switching Output kunye ne-IO-Link, i-Output kunye ne-IO-Link. |
