lcs+340/F/A Ultrasonic Proximity Switch tare da Fitowar Sauyawa ɗaya da IO-Link
Manual mai amfani 
Littafin aiki
Ultrasonic kusanci canza tare da fitarwa guda ɗaya mai sauyawa da IO-Link
lcs+340/F/A
lcs+600/F/A
Bayanin Samfura
Na'urar firikwensin lcs+ yana ba da ma'aunin mara lamba na nisa zuwa abu wanda dole ne a sanya shi a cikin yankin gano firikwensin.
An saita fitarwar sauyawa bisa sharadi akan daidaitawar nisan ganowa. Ta hanyar hanyar Koyarwa, ana iya daidaita tazarar ganowa da yanayin aiki. Ɗayan LED yana nuna aiki da yanayin fitarwar sauyawa.
Na'urori masu auna firikwensin lcs + suna da ikon IO-Link daidai da ƙayyadaddun IO-Link V1.1 kuma suna goyan bayan Smart Sensor Pro.file kamar Sensor Aunawa na Dijital.
Bayanan Tsaro
- Karanta littafin aiki kafin farawa.
- Ƙwararrun ma'aikata ne kawai za a iya aiwatar da haɗin kai, shigarwa da gyare-gyare.
- Babu wani bangaren aminci daidai da umarnin Injin EU, amfani da shi a cikin yanki na kariyar na'ura da ba a yarda da shi ba.
Amfani Da Kyau
Ana amfani da na'urori masu auna firikwensin lcs+ don gano abubuwan da ba a haɗa su ba.
 |
 |
launi |
| 1 | + UB | launin ruwan kasa |
| 3 | - UB | blue |
| 4 | F | baki |
| 2 | – | fari |
| 5 | Daidaitawa/Com | launin toka |
Hoto 1: Pin aiki tare da view uwa filogi na firikwensin da lambar launi na igiyoyin haɗin microsonic
Shigarwa
- Dutsen firikwensin a wurin dacewa.
- Haɗa kebul na haɗi zuwa filogin na'urar M12, duba Hoto 1.
Farawa
- Haɗa wutar lantarki.
- Saita sigogi na firikwensin, duba zane 1.
Saitin masana'anta
- Canja wurin fitarwa akan NOC
- Gano nisa a kewayon aiki
Hanyoyin Aiki
Akwai hanyoyin aiki guda uku don fitarwar sauyawa:
- Aiki tare da wurin sauyawa ɗaya
Ana saita fitarwar sauyawa lokacin da abu ya faɗi ƙasa da wurin da aka saita. - Yanayin taga
Ana saita fitarwar sauyawa lokacin da abu yana cikin iyakokin taga. - Shamaki mai nuni da hanya biyu
Ana saita fitarwar sauyawa lokacin da abu yake tsakanin firikwensin da kafaffen abin tunani.
 |
 |
|
| lcs+340… | ≥2.00m | ≥18.00m |
| lcs+600… | ≥4.00m | ≥30.00m |
Hoto 2: Ƙananan nisa na taro ba tare da aiki tare ba
Zane na 1: Saita sigogi na firikwensin ta hanyar koyarwa
Aiki tare
Idan nisan haɗin na'urori masu auna firikwensin ya faɗi ƙasa da ƙimar da aka nuna a cikin siffa 2, yakamata a yi amfani da aiki tare na ciki. Don wannan dalili saitin abubuwan da ke sauyawa na duk na'urori masu auna firikwensin daidai da zane 1. A ƙarshe haɗa kowane fil 5 na firikwensin don daidaitawa.
Kulawa
Na'urori masu auna firikwensin microsonic ba su da kulawa. Idan akwai wuce haddi mai datti muna ba da shawarar tsaftace farin firikwensin firikwensin.
Bayanan kula
- Na'urori masu auna firikwensin dangin lcs+ suna da yankin makafi, wanda a cikinsa ba zai yiwu a auna nisa ba.
- Na'urori masu auna firikwensin lcs+ an sanye su da diyya na zafin jiki na ciki. Saboda dumama na'urori masu auna kai, ramuwar zafin jiki ya kai ga mafi kyawun wurin aiki bayan kusan. Minti 30 na aiki.
- A cikin yanayin aiki na yau da kullun, LED mai haske mai haske mai launin rawaya yana nuna sigina cewa fitarwar sauyawa ta canza ta.
- Na'urori masu auna firikwensin lcs+ suna da abin da ake juyawa na turawa.
- A cikin yanayin "hanyoyi biyu masu nuni da" aiki, abu dole ne ya kasance tsakanin kewayon 0-85 % na nisa da aka saita.
- A cikin "Set detect point - Hanyar A« Koyarwa-a hanya madaidaiciyar nisa zuwa abu ana koyar da firikwensin azaman wurin ganowa. Idan abu ya matsa zuwa firikwensin (misali tare da sarrafa matakin) to nisan da aka koya shine matakin da firikwensin ya canza kayan aiki.
- Idan abin da za a bincika ya motsa zuwa wurin ganowa daga gefe, "Saita wurin ganowa +8 % - hanyar B« ya kamata a yi amfani da hanyar koyarwa. Ta wannan hanyar ana saita nisan sauyawa 8 % fiye da ainihin nisa da aka auna zuwa abu. Wannan yana tabbatar da ingantacciyar tazarar sauyawa koda kuwa tsayin abubuwan ya bambanta kaɗan.
Bayanan fasaha
 |
 |
 |
| yankin makafi | 0 zuwa 350 mm | 0 zuwa 600 mm |
| kewayon aiki | mm3,400 ku | mm6,000 ku |
| iyakar iyaka | mm5,000 ku | mm8,000 ku |
| kwana na katako yada | duba yankunan ganowa | duba yankunan ganowa |
| mitar transducer | 120 kHz | 80 kHz |
| ƙuduri | mm0.18 ku | mm0.18 ku |
| sake haifuwa | ± 0.15% | ± 0.15% |
| yankunan ganowa don abubuwa daban-daban: Wuraren launin toka mai duhu suna wakiltar yankin inda yana da sauƙin gane mai nuna al'ada (masanin zagaye). Wannan yana nuna yanayin aiki na na'urori masu auna firikwensin. Wuraren launin toka mai haske suna wakiltar yankin inda babban abin haskakawa-don misali faranti - har yanzu ana iya gane shi. Abin da ake bukata anan shine don ingantacciyar daidaitawa zuwa firikwensin. Ba zai yiwu a kimanta tunanin ultrasonic a wajen wannan yanki ba. |
 |
 |
| daidaito | ± 1 % (matsayin zafin jiki na ciki; za a iya kashe 1) , 0,17 %/K ba tare da diyya ba) |
± 1 % (matsayin zafin jiki na ciki; za a iya kashe 1) , 0,17 %/K ba tare da diyya ba) |
| aiki voltagda UB | 9 zuwa 30V DC, kariyar polarity ta baya | 9 zuwa 30V DC, kariyar polarity ta baya |
| voltagda rigima | ± 10% | ± 10% |
| no-load na yanzu amfani | ≤60 mA | ≤60 mA |
| gidaje | PBT, Polyester; ultrasonic transducer: kumfa polyurethane, resin epoxy tare da abun ciki na gilashi |
PBT, Polyester; ultrasonic transducer: kumfa polyurethane, resin epoxy tare da abun ciki na gilashi |
| Tsarin kariya ta EN 60529 | IP67 | IP67 |
| nau'in haɗin gwiwa | 5-pin M12 madauwari toshe, PBT | 5-pin M12 madauwari toshe, PBT |
| sarrafawa | 2 maɓallan turawa | 2 maɓallan turawa |
| shirye-shirye | Koyarwa ta hanyar maɓallan turawa LCA-2 tare da LinkControl, IO-Link |
Koyarwa ta hanyar maɓallan turawa LCA-2 tare da LinkControl; IO-Link |
| alamomi | 2 LEDs rawaya/kore (saitin fitarwa/ba a saita) |
2 LEDs rawaya/kore (saitin fitarwa/ba a saita) |
| aiki tare | aiki tare na ciki har zuwa firikwensin 10 | aiki tare na ciki har zuwa firikwensin 10 |
| zafin aiki | –25 zuwa + 70 ° C | –25 zuwa + 70 ° C |
| zafin jiki na ajiya | –40 zuwa + 85 ° C | –40 zuwa + 85 ° C |
| nauyi | 180g ku | 240g ku |
| canza hysteresis1) | mm50 ku | mm100 ku |
| sauyawa mita1) | 4 Hz | 3 Hz |
| lokacin amsawa1) | 172 ms | 240 ms |
| jinkirta lokaci kafin samuwa1) | <380 ms | <450 ms |
| daidaituwar al'ada | TS EN 60947-5-2 | TS EN 60947-5-2 |
| oda a'a. | lcs+340/F/A | lcs+340/F/A |
| fitarwa fitarwa |
1) Ana iya shirya ta hanyar LinkControl da IO-Link.
Hoto 3: Saita wurin ganowa don hanyoyi daban-daban na motsi na abu
- Ana iya sake saita firikwensin zuwa saitin masana'anta (duba "Ƙarin saituna").
- Yin amfani da adaftar LinkControl (na'urorin haɗi na zaɓi) da software na LinkControl don Windows®, duk Koyarwa da ƙarin saitunan sigar firikwensin za a iya aiwatar da su ta zaɓin zaɓi.
- Sabuwar IODD file da bayanai game da farawa da haɓaka na'urori masu auna firikwensin lcs+ tare da IO-Link, zaku sami kan layi a: www.microsonic.de/lcs+.
- Don ƙarin bayani kan IO-Link duba www.io-link.com.
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jamus
T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Abubuwan da ke cikin wannan takarda yana ƙarƙashin canje-canjen fasaha.
Ana gabatar da ƙayyadaddun ƙayyadaddun bayanai a cikin wannan takaddar ta hanyar siffantawa kawai.
Ba su da garantin kowane fasalin samfur.
Takardu / Albarkatu
 |
microsonic lcs+340/F/A Ultrasonic Proximity Switch tare da Fitowar Sauyawa ɗaya da IO-Link [pdf] Manual mai amfani lcs 340 FA Ultrasonic Proximity Switch with One Switching Output and IO-Link, lcs 340 FA, Ultrasonic Proximity Switch with One Switching Output Da IO-Link, Sauyawa Fitowa Da IO-Link, Fitarwa da IO-Link |
