I-Beijer ELECTRONICS GT-3424 Imodyuli yokufaka ye-Analog
4 ch, 0 – 5 V / 1 – 5 V / 0 – 10 V, 12 bit resolution, cage clamp, 10 pt i-terminal esusekayo
I-ID kaDoc: 77972
2025-02-20
Ushicilelo © 2025 Beijer Electronics AB. Onke Amalungelo Agciniwe.
- Ulwazi olukolu xwebhu lunokutshintsha ngaphandle kwesaziso kwaye lunikezelwa njengoko lufumaneka ngexesha lokushicilela. I-Beijer Electronics AB inelungelo lokutshintsha naluphi na ulwazi ngaphandle kokuhlaziya olu papasho. I-Beijer Electronics AB ayithathi xanduva ngazo naziphi na iimpazamo ezinokuvela kolu xwebhu. Zonke exampLes kolu xwebhu zenzelwe kuphela ukuphucula ukuqonda ukusebenza kunye nokuphathwa kwezixhobo. I-Beijer Electronics AB ayinakuthatha naluphi na uxanduva ukuba ezi examples zisetyenziswa kwizicelo zokwenyani.
- In view kuluhlu olubanzi lwezicelo zale software, abasebenzisi kufuneka bafumane ulwazi olwaneleyo ngokwabo ukuze baqinisekise ukuba lusetyenziswa ngokuchanekileyo kwisicelo sabo esithile. Abantu abajongene nesicelo kunye nezixhobo kufuneka baqinisekise ngokwabo ukuba isicelo ngasinye siyahambelana nazo zonke iimfuno ezifanelekileyo, imigangatho kunye nomthetho ngokubhekiselele kumo nokhuseleko. I-Beijer Electronics AB iya kwamkela akukho butyala ngawo nawuphi na umonakalo owenziwe ngexesha lofakelo okanye ukusetyenziswa kwezixhobo ezikhankanywe kolu xwebhu. I-Beijer Electronics AB inqanda konke ukuguqulwa, utshintsho, okanye ukuguqulwa kwezixhobo.
I-ofisi eyintloko
Beijer Electronics AB
Ibhokisi 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600
Malunga nale Ncwadana
Le ncwadana iqulethe ulwazi malunga nesoftware kunye nezixhobo zehardware zeBeijer Electronics GT-3424 Imodyuli yoNgeniso yeAnalog. Inika iinkcukacha ezinzulu, isikhokelo sofakelo, ukuseta, kunye nokusetyenziswa kwemveliso.
Iisimboli ezisetyenziswa kule ncwadana
Olu papasho luquka isilumkiso, iSilumkiso, iNqaku kunye neempawu ezibalulekileyo apho kufanelekileyo, ukubonisa ukhuseleko, okanye ezinye iinkcukacha ezibalulekileyo. Iisimboli ezihambelanayo kufuneka zitolikwe ngolu hlobo lulandelayo:
Ukhuseleko
Ngaphambi kokusebenzisa le mveliso, nceda ufunde le ncwadana kunye nezinye iincwadana ezifanelekileyo ngononophelo. Nika ingqalelo epheleleyo kwimiyalelo yokhuseleko!
Akukho siganeko siya kuba noxanduva lwe-Beijer Electronics okanye uxanduva lomonakalo obangelwa kukusetyenziswa kwale mveliso.
Imifanekiso, umzampiiles kunye nemizobo kule ncwadana zibandakanyiwe ngeenjongo zokubonisa. Ngenxa yezinto ezininzi eziguquguqukayo kunye neemfuno ezinxulumene naluphi na ufakelo oluthile, iBeijer Electronics ayinakuthatha uxanduva okanye uxanduva lokusetyenziswa ngokwenyani ngokusekelwe kwi-ex.amples kunye nemizobo.
Izatifikethi zeMveliso
Imveliso ineziqinisekiso zemveliso ezilandelayo.
Iimfuno ngokubanzi zoKhuseleko
ISILUMKISO
- Musa ukudibanisa iimveliso kunye neengcingo ngamandla aqhagamshelwe kwinkqubo. Ukwenza njalo kubangela "i-arc flash", enokubangela iziganeko ezinobungozi ezingalindelekanga (ukutsha, umlilo, izinto ezibhabhayo, uxinzelelo lokuqhuma, ukuqhuma kwesandi, ukushisa).
- Do not touch terminal blocks or IO modules when the system is running. Doing so may cause electric shock, short circuit or a malfunction of the device.
- Ungaze uvumele izinto zentsimbi zangaphandle zichukumise imveliso xa inkqubo isebenza. Ukwenza oko kunokubangela ukothuka kombane, isekethe emfutshane okanye ukungasebenzi kakuhle kwesixhobo.
- Musa ukubeka imveliso kufuphi nezinto ezinokutsha. Ukwenjenjalo kunokubangela umlilo.
- Wonke umsebenzi wocingo kufuneka wenziwe yinjineli yombane.
- When handling the modules, ensure that all persons, the workplace and the packing are well grounded. Avoid touching conductive components; the modules contain electronic components that may be destroyed by electrostatic discharge.
ISILUMKO
- Ungaze usebenzise imveliso kwindawo ezinobushushu obungaphezulu kwe 60℃. Kuphephe ukubeka imveliso kwilanga elithe ngqo.
- Ungaze usebenzise imveliso kwindawo enokufuma okungaphezulu kwe-90%.
- Ngalo lonke ixesha sebenzisa imveliso kwindawo enongcoliseko degree 1 okanye 2.
- Sebenzisa iintambo eziqhelekileyo zocingo.
Malunga neNkqubo ye-G-series
Inkqubo iphelileview
- Imodyuli ye-Adapter yenethiwekhi - Imodyuli ye-adapter yenethiwekhi yenza ikhonkco phakathi kwebhasi yentsimi kunye nezixhobo zentsimi kunye neemodyuli zokwandisa. Uxhulumaniso kwiinkqubo ezahlukeneyo zebhasi yebhasi inokusekwa nganye kwimodyuli ye-adapter yenethiwekhi ehambelanayo, umzekelo, i-MODUS TCP, i-Ethernet IP, i-EtherCAT, i-PROFINET, i-CC-Link IE Field, i-PROFIBUS, i-CANopen, i-DeviceNet, i-CC-Link, i-MODUS / i-Serial njl.
- Imodyuli yoKwandiswa - Iindidi zeemodyuli zoKwandiswa: I-IO yeDijithali, i-Analog IO, kunye neemodyuli eziKhethekileyo.
- Ukuthumela imiyalezo - Inkqubo isebenzisa iindidi ezimbini zemiyalezo: Ukuthumela imiyalezo ngenkonzo kunye ne-IO yemiyalezo.
Inkqubo ye-IO yeMaphu yedatha
Imodyuli yokwandisa ineentlobo ezintathu zedatha: idatha ye-IO, ipharamitha yoqwalaselo, kunye nerejista yememori. Utshintshiselwano lwedatha phakathi kwe-adapter yenethiwekhi kunye neemodyuli zokwandisa zenziwe nge-IO inkqubo yedatha yomfanekiso ngeprotocol yangaphakathi.
Ukuhamba kwedatha phakathi kwe-adapter yenethiwekhi (i-63 slots) kunye neemodyuli zokwandisa
Igalelo kunye nemveliso yedatha yomfanekiso ixhomekeke kwindawo yokubeka kunye nohlobo lwedatha ye-slot yokwandisa. Ukucwangciswa igalelo kunye nemveliso data umfanekiso wenkqubo isekelwe kwindawo slot ukwandiswa. Ubalo lwala malungiselelo lubandakanyiwe kwiincwadana ze-adaptha yenethiwekhi kunye neemodyuli ze-IO ezicwangcisiweyo.
Idatha yeparameter esebenzayo ixhomekeke kwiimodyuli ezisetyenziswayo. UmzekeloampLe, iimodyuli ze-analog zinezicwangciso ze-0-20 mA okanye 4-20 mA, kwaye iimodyuli zobushushu zineseto ezifana ne-PT100, PT200, kunye ne-PT500. Uxwebhu lwemodyuli nganye lubonelela ngenkcazo yedatha yeparameter.
Iinkcukacha
| Ubushushu bokusebenza | -20°C – 60°C |
| Ubushushu be-UL | -20°C – 60°C |
| Ubushushu bokugcina | -40°C – 85°C |
| Ubuntu bezizalwane | I-5% -90% ayivali |
| Ukunyuka | DIN kaloliwe |
| Ukothuka ukusebenza | IEC 60068-2-27 (15G) |
| Ukuxhathisa ukungcangcazela | IEC 60068-2-6 (4 g) |
| Ukukhutshwa kwamashishini | I-EN 61000-6-4: 2019 |
| Ukungakhuseleki kwamashishini | I-EN 61000-6-2: 2019 |
| Indawo yokufakela | Ithe nkqo kwaye ithe tye |
| Izatifikethi zemveliso | CE, FCC, UL, cUL |
Inkcazo ngokubanzi
| Ukutshatyalaliswa kwamandla | Max. 25 mA @ 5 VDC |
| Ukubekwa wedwa | I/O ukuya kwingqiqo: Ukwahlukaniswa
Amandla ommandla: Ukungakhethi |
| UL amandla entsimi | Ukubonelela ngevoltage: 24 VDC igama, iklasi2 |
| Amandla entsimi | Ukubonelela ngevoltage: 24 VDC nominal Voltaguluhlu e: 18-30 VDC
Ukutshatyalaliswa kwamandla: Max. 25 mA @ 24 VDC |
| Iintambo | I/O intambo enkulu. 2.0mm2 (AWG 14) |
| Torque | 0.8 Nm (7 lb-in) |
| Ubunzima | 58 g |
| Ubungakanani bemodyuli | 12 mm x 99 mm x 70 mm |
Imilinganiselo
IiNgcaciso zeNgeniso
| Igalelo kwimodyuli nganye | Iitshaneli ezi-4 ziphelile, zingahlukaniswanga phakathi kwetshaneli |
| Iimpawu | 4 ubume begalelo eliluhlaza |
| Isisombululo kwiindidi | 12 bits: 2.44 mV/Bit (0-10 V), 1.22 mV/Bit (0-5 V), 0.977 mV/Bit (1-5 V) |
| Uluhlu lwangoku lokufaka | 0-10 VDC, 0-5 VDC, 1-5 VDC |
| Ifomathi yedatha | I-16 bits integer (2′ ukuncoma) |
| Impazamo yemodyuli | ±0.1 % isikali esipheleleyo @ 25 ℃ i-ambient
±0.3 % isikali esipheleleyo @ -40 °C, 70 ℃ |
| I-impedance yokufaka | 500 Ω |
| Uxilongo | Ukucinywa kombane wokuxilonga: Ukuqhwanyaza kwe-LED
Field power on: LED off < 0.5 % (maximum input value) Field power on: LED on > 0.5 % (maximum input value) |
| Ixesha loguqulo | 0.4 msec / All channels |
| Ulungelelwaniso lommandla | Ayifuneki |
| Uhlobo oluqhelekileyo | 4 eqhelekileyo, amandla entsimi 0 V ixhaphakile (AGND) |
Umzobo wocingo
| Inombolo yePin. | Inkcazo yomqondiso |
| 0 | Itshaneli yokufaka 0 |
| 1 | Itshaneli yokufaka 1 |
| 2 | Itshaneli yokufaka 2 |
| 3 | Itshaneli yokufaka 3 |
| 4 | Ijelo legalelo eliqhelekileyo (AGND) |
| 5 | Ijelo legalelo eliqhelekileyo (AGND) |
| 6 | Ijelo legalelo eliqhelekileyo (AGND) |
| 7 | Ijelo legalelo eliqhelekileyo (AGND) |
| 8 | FG |
| 9 | FG |
Isalathisi se-LED
| Inombolo ye-LED. | Umsebenzi we-LED / inkcazo | Umbala we-LED |
| 0 | INPUT isitishi 0 | Luhlaza |
| 1 | INPUT isitishi 1 | Luhlaza |
| 2 | INPUT isitishi 2 | Luhlaza |
| 3 | INPUT isitishi 3 | Luhlaza |
Ubume beSitishi se-LED
| Ubume | I-LED | Isalathiso |
| Ukusebenza okuqhelekileyo | [LED off < 0.5 % (maximum input value)] –
Umjelo OFF [LED on > 0.5 % (maximum input value)] – Channel Green |
Ukusebenza okuqhelekileyo |
| Impazamo yamandla ommandla | All channels repeat Green and OFF | Amandla ommandla akaqhagamshelwanga |
Data value / Voltage
Umqulutaguluhlu e: 0-10 VDC
| Umqulutage | 0.0 V | 2.5 V | 5.0 V | 10.0 V |
| Idatha (Hex) | H0000 | H03FF | H07FF | H0FFF |
Umqulutaguluhlu e: 0-5 VDC
| Umqulutage | 0.0 V | 1.25 V | 2.5 V | 5.0 V |
| Idatha (Hex) | H0000 | H03FF | H07FF | H0FFF |
Umqulutaguluhlu e: 1-5 VDC
| Umqulutage | 1.0 V | 2.0 V | 3.0 V | 5.0 V |
| Idatha (Hex) | H0000 | H03FF | H07FF | H0FFF |
Ukwenza iMaphu yeDatha kwiTheyibhile yoMfanekiso
Idatha yemodyuli yongeniso
| Igalelo le-analog Ch 0 |
| Igalelo le-analog Ch 1 |
| Igalelo le-analog Ch 2 |
| Igalelo le-analog Ch 3 |
Ngena ixabiso lomfanekiso
| Hayi kancinci. | Incinci 7 | Incinci 6 | Incinci 5 | Incinci 4 | Incinci 3 | Incinci 2 | Incinci 1 | Incinci 0 |
| Byte 0 | Igalelo le-analog Ch 0 ngebhayithi ephantsi | |||||||
| Byte 1 | Igalelo le-analog Ch 0 ngebhayithi ephezulu | |||||||
| Byte 2 | Igalelo le-analog Ch 1 ngebhayithi ephantsi | |||||||
| Byte 3 | Igalelo le-analog Ch 1 ngebhayithi ephezulu | |||||||
| Byte 4 | Igalelo le-analog Ch 2 ngebhayithi ephantsi | |||||||
| Byte 5 | Igalelo le-analog Ch 2 ngebhayithi ephezulu | |||||||
| Byte 6 | Igalelo le-analog Ch 3 ngebhayithi ephantsi | |||||||
| Byte 7 | Igalelo le-analog Ch 3 ngebhayithi ephezulu | |||||||
Idatha yeParameter
Ubude beparameter esebenzayo: 6 Bytes
| Hayi kancinci. | Incinci 7 | Incinci 6 | Incinci 5 | Incinci 4 | Incinci 3 | Incinci 2 | Incinci 1 | Incinci 0 |
| Byte 0 | Umqulutage range for Channel 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 1 | Umqulutage range for Channel 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 2 | Umqulutage range for Channel 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 3 | Umqulutage range for Channel 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Byte 4 | Filter Time (H00: Default filter(20) / H01: Fastest – / H3E: Slowest ) | |||||||
| Byte 5 | Not used (=00) | |||||||
Ukuseta i-Hardware
ISILUMKO
- Soloko ufunda esi sahluko phambi kokufaka imodyuli!
- Umphezulu oshushu! Umphezulu wendlu unokuba shushu ngexesha lokusebenza. Ukuba ifowuni isetyenziswa kumaqondo obushushu aphezulu akwi-ambient, soloko uvumele ifowuni ukuba iphole phambi kokuba uyibambe.
- Ukusebenza kwizixhobo ezinamandla kunokonakalisa izixhobo! Soloko ucima unikezelo lombane phambi kokuba usebenze kwisixhobo.
Iimfuno zesithuba
Imizobo elandelayo ibonisa iimfuno zendawo xa ufaka iimodyuli ze-G-series. Isithuba sidala isithuba sokungena komoya, kwaye sithintela uphazamiseko olwenziwa ngumbane wombane ekubeni luphembelele umsebenzi. Indawo yokuhlohla ilungile ithe nkqo kwaye ithe tye. Imizobo iyimifanekiso kwaye isenokungalingani.
ISILUMKO
UKUNGANI ukulandela iimfuno zendawo kunokubangela ukonakalisa imveliso.
Nyuka iModyuli ukuya kwi-DIN kaloliwe
Izahluko ezilandelayo zichaza indlela yokunyuswa kwemodyuli kwisiporo seDIN.
ISILUMKO
Imodyuli kufuneka ilungiswe kwi-DIN kaloliwe kunye nezixhobo zokutshixa.
Nyuka i-GL-9XXX okanye i-GT-XXXX Imodyuli
Le miyalelo ilandelayo iyasebenza kwezi ntlobo zemodyuli:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Iimodyuli ze-GN-9XXX zineentsimbi zokutshixa ezintathu, enye isezantsi kwaye ezimbini ecaleni. Ngemiyalelo yokunyuswa, jonga kwiModyuli ye-Mount GN-9XXX.
Nyuka i-GN-9XXX Imodyuli
Ukunyuka okanye ukuhlisa iadaptha yenethiwekhi okanye imodyuli yeIO ecwangcisekileyo enegama lemveliso GN-9XXX, ye ex.ample GN-9251 okanye GN-9371, bona le miyalelo ilandelayo:
Nqaba iBhlokhi yeSitena esiSukayo
Ukunyuka okanye ukuhlisa ibhloko yeterminal esusekayo (RTB), bona le miyalelo ingezantsi.
Qhagamshela iiCables kwiBhloko yeSitena esiSukayo
To connect/disconnect cables to/from the removable terminal block (RTB), see the instructions Vbelow.
ISILUMKISO
Soloko usebenzisa umthamo wonikezelo olucetyiswayotage kunye nobuninzi bokuthintela umonakalo kwisixhobo kunye nokuqinisekisa ukusebenza kakuhle.
Amandla oMmandla kunye nezikhonkwane zeDatha
Unxibelelwano phakathi kwe-adapter yenethiwekhi ye-G-series kunye nemodyuli yokwandisa, kunye nenkqubo / ukunikezelwa kwamandla entsimi yeemodyuli zebhasi zenziwa ngebhasi yangaphakathi. Iqulethwe ngamaPini aMandla oMmandla we-2 kunye neePini zeDatha ezi-6.
ISILUMKISO
Sukuchukumisa idatha kunye nezikhonkwane zamandla endle! Ukuchukumisa kunokubangela ukungcoliswa kunye nomonakalo yingxolo ye-ESD.
| Inombolo yePin. | Igama | Inkcazo |
| P1 | Inkqubo yeVCC | Unikezelo lwenkqubo voltage (5 VDC) |
| P2 | Inkqubo ye-GND | Umhlaba wenkqubo |
| P3 | Isiphumo sophawu | Izibuko lemveliso yophawu lomnqongo womqhubekekisi |
| P4 | Iziphumo zothotho | Ugqithiso lwemveliso yemodyuli yeprosesa |
| P5 | Igalelo lothotho | Isango longeniso lomamkeli wemodyuli yomqhubekekisi |
| P6 | Igciniwe | Igcinelwe uphawu lokugqitha |
| P7 | Ummandla we-GND | Umhlaba wentsimi |
| P8 | Indawo yeVCC | Unikezelo lommandla voltage (24 VDC) |
Imibuzo ebuzwa qho
- Q: What should I do if I encounter an error while using the GT-3424 Analog Input Module?
A: If you encounter an error, refer to the troubleshooting section of the manual to identify and resolve the issue. If the problem persists, contact customer support for assistance. - Q: Can I use the GT-3424 Analog Input Module with voltage ranges other than 0-5V, 1-5V, or 0-10V?
A: The module is designed to work within the specified voltage ranges. Using voltages outside these ranges may damage the module and void the warranty.
Amaxwebhu / Izibonelelo
 |
I-Beijer ELECTRONICS GT-3424 Imodyuli yokufaka ye-Analog [pdf] Incwadi yokusebenzisa GT-3424, GT-3424 Analog Input Module, Analog Input Module, Input Module, Module |