Beijer ELECTRONICS GT-3424 Analog Input Module
4 ch, 0 - 5 V / 1 - 5V / 0 - 10 V, 12 bit ƙuduri, keji clamp, 10 pt m tasha
Takardar bayanai:77972
2025-02-20
Haƙƙin mallaka © 2025 Beijer Electronics AB. An kiyaye duk haƙƙoƙi.
- Bayanin da ke cikin wannan takarda yana iya canzawa ba tare da sanarwa ba kuma ana bayar da shi kamar yadda yake a lokacin bugawa. Beijer Electronics AB yana da haƙƙin canza kowane bayani ba tare da sabunta wannan ɗaba'ar ba. Beijer Electronics AB ba ta da alhakin kowane kurakurai da ka iya bayyana a cikin wannan takarda. Duk examples a cikin wannan takarda an yi niyya ne kawai don inganta fahimtar ayyuka da sarrafa kayan aiki. Beijer Electronics AB ba zai iya ɗaukar kowane alhaki ba idan waɗannan tsoffinampAna amfani da les a ainihin aikace-aikace.
- In view daga cikin nau'ikan aikace-aikacen wannan software, masu amfani dole ne su sami isasshen ilimi da kansu don tabbatar da cewa an yi amfani da shi daidai a takamaiman aikace-aikacen su. Mutanen da ke da alhakin aikace-aikacen da kayan aiki dole ne da kansu su tabbatar da cewa kowane aikace-aikacen ya dace da duk buƙatun da suka dace, ƙa'idodi, da dokoki dangane da tsari da aminci. Beijer Electronics AB ba za ta karɓi wani alhaki ga duk wani lahani da ya faru yayin shigarwa ko amfani da kayan aiki da aka ambata a cikin wannan takarda. Beijer Electronics AB ya haramta duk gyare-gyare, canje-canje, ko canza kayan aiki.
Babban ofishi
Beijer Electronics AB girma
Akwatin 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600
Game da Wannan Jagoran
Wannan littafin ya ƙunshi bayani kan software da kayan masarufi na Beijer Electronics GT-3424 Analog Input Module. Yana ba da cikakkun bayanai masu zurfi, jagora akan shigarwa, saiti, da amfani da samfurin.
Alamomin da Aka Yi Amfani da su a cikin Wannan Jagoran
Wannan ɗaba'ar ya haɗa da Gargaɗi, Tsanaki, Bayanan kula da gumaka masu mahimmanci inda ya dace, don nuna masu alaƙa da aminci, ko wasu mahimman bayanai. Ya kamata a fassara alamomin da suka dace kamar haka:
Tsaro
Kafin amfani da wannan samfurin, da fatan za a karanta wannan jagorar da sauran littattafan da suka dace a hankali. Biya cikakken hankali ga umarnin aminci!
Babu wani abu da Beijer Electronics zai kasance da alhakin ko alhakin lalacewa sakamakon amfani da wannan samfurin.
Hotunan, examples da zane-zane a cikin wannan jagorar an haɗa su don dalilai na misali. Saboda yawancin masu canji da buƙatun da ke da alaƙa da kowane takamaiman shigarwa, Beijer Electronics ba zai iya ɗaukar nauyi ko alhaki don ainihin amfani dangane da tsohonamples da zane-zane.
Takaddun shaida na samfur
Samfurin yana da takaddun takaddun samfur masu zuwa.
Janar Bukatun Tsaro
GARGADI
- Kada a haɗa samfuran da wayoyi tare da wutar da aka haɗa da tsarin. Yin haka yana haifar da “bakin filashi”, wanda zai iya haifar da al’amura masu haɗari da ba zato ba tsammani (ƙonawa, wuta, abubuwa masu tashi, matsa lamba, fashewar sauti, zafi).
- Do not touch terminal blocks or IO modules when the system is running. Doing so may cause electric shock, short circuit or a malfunction of the device.
- Kada ka bari abubuwan ƙarfe na waje su taɓa samfurin lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa ko rashin aiki na na'urar.
- Kada ka sanya samfurin kusa da abu mai ƙonewa. Yin hakan na iya haifar da gobara.
- Duk aikin wayoyi ya kamata injiniyan lantarki ya yi.
- When handling the modules, ensure that all persons, the workplace and the packing are well grounded. Avoid touching conductive components; the modules contain electronic components that may be destroyed by electrostatic discharge.
HANKALI
- Kada a taɓa amfani da samfurin a cikin mahallin da zafin jiki sama da 60 ℃. Guji sanya samfurin a cikin hasken rana kai tsaye.
- Kada a taɓa amfani da samfurin a cikin mahallin sama da 90% zafi.
- Yi amfani da samfur koyaushe a cikin mahalli tare da gurɓataccen digiri 1 ko 2.
- Yi amfani da madaidaicin igiyoyi don yin wayoyi.
Game da Tsarin G-jerin
Tsarin ya ƙareview
- Module Adaftar hanyar sadarwa - Tsarin adaftar hanyar sadarwa yana samar da hanyar haɗin kai tsakanin bas ɗin filin da na'urorin filin tare da kayan haɓakawa. Haɗin zuwa tsarin bas na filin daban-daban na iya kafa ta kowane ɗayan adaftar cibiyar sadarwa mai dacewa, misali, don MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial da sauransu.
- Module Faɗawa - Nau'in nau'ikan haɓakawa: Digital IO, Analog IO, da na'urori na musamman.
- Saƙo - Tsarin yana amfani da saƙo iri biyu: Saƙon sabis da saƙon IO.
IO Tsarin Taswirar Bayanai
Tsarin fadada yana da nau'ikan bayanai guda uku: bayanan IO, ma'aunin daidaitawa, da rajistar ƙwaƙwalwar ajiya. Ana yin musayar bayanai tsakanin adaftar cibiyar sadarwa da tsarin haɓakawa ta hanyar aiwatar da bayanan hoto na IO ta hanyar yarjejeniya ta ciki.
Gudun bayanai tsakanin adaftan cibiyar sadarwa (ramummuka 63) da kuma abubuwan haɓakawa
Bayanan bayanan shigarwa da fitarwa sun dogara ne akan matsayin ramin da nau'in bayanai na ramin fadadawa. Yin odar shigarwa da fitarwa bayanan hoto yana dogara ne akan matsayi na faɗaɗawa. Lissafi don wannan tsari an haɗa su a cikin jagorar adaftar cibiyar sadarwa da na'urorin IO masu shirye-shirye.
Ingantattun bayanan siga ya dogara da samfuran da ake amfani da su. Domin misaliample, na'urorin analog suna da saitunan ko dai 0-20 mA ko 4-20 mA, kuma na'urorin zafin jiki suna da saituna kamar PT100, PT200, da PT500. Takaddun bayanai na kowane nau'i yana ba da bayanin bayanan siga.
Ƙayyadaddun bayanai
| Yanayin aiki | -20°C – 60°C |
| UL zafin jiki | -20°C – 60°C |
| Yanayin ajiya | -40°C – 85°C |
| Dangi zafi | 5%-90% ba condensing |
| Yin hawa | DIN dogo |
| Shock aiki | IEC 60068-2-27 (15G) |
| Juriya na rawar jiki | IEC 60068-2-6 (4 g) |
| Fitar masana'antu | EN 61000-6-4: 2019 |
| Kariyar masana'antu | EN 61000-6-2: 2019 |
| Matsayin shigarwa | A tsaye da a kwance |
| Takaddun shaida na samfur | CE, FCC, UL |
Ƙididdigar Gabaɗaya
| Rashin wutar lantarki | Max. 25mA @ 5 VDC |
| Kaɗaici | I/O zuwa dabaru: Warewa
Ikon filin: Rashin ware |
| UL filin iko | Ƙarar voltage: 24 VDC maras kyau, class2 |
| Ƙarfin filin | Ƙarar voltage: 24 VDC mai lamba Voltage kewayon: 18-30 VDC
Power dissipation: Max. 25 mA @ 24 VDC |
| Waya | I/O na USB max. 2.0mm2 (AWG 14) |
| Torque | 0.8 nm (7 lb-in) |
| Nauyi | 58g ku |
| Girman module | 12 x 99 mm x 70 mm |
Girma
Ƙididdigar shigarwa
| Abubuwan shigarwa kowane module | Tashoshi 4 sun ƙare, ba a ware tsakanin tashoshi |
| Manuniya | Matsayin shigarwar kore 4 |
| Ƙaddamarwa a cikin jeri | 12 bits: 2.44 mV/Bit (0-10 V), 1.22 mV/Bit (0-5 V), 0.977 mV/Bit (1-5 V) |
| Shigar da kewayon halin yanzu | 0-10 VDC, 0-5 VDC, 1-5 VDC |
| Tsarin bayanai | lamba 16 bit (2' yabo) |
| Kuskuren Module | ± 0.1 % cikakken sikelin @ 25 ℃ na yanayi
± 0.3 % cikakken ma'auni @ -40 °C, 70 ℃ |
| Input impedance | 500 Ω |
| Bincike | A kashe wutar filin bincike: LED kiftawa
Field power on: LED off < 0.5 % (maximum input value) Field power on: LED on > 0.5 % (maximum input value) |
| Lokacin juyawa | 0.4 msec / All channels |
| Gyaran filin | Ba a buƙata |
| Nau'in gama gari | 4 gama gari, ikon filin 0V gama gari ne (AGND) |
Tsarin Waya
| Fil babu. | Bayanin sigina |
| 0 | Tashar shigarwa 0 |
| 1 | Tashar shigarwa 1 |
| 2 | Tashar shigarwa 2 |
| 3 | Tashar shigarwa 3 |
| 4 | Tashar shigarwa ta gama gari (AGND) |
| 5 | Tashar shigarwa ta gama gari (AGND) |
| 6 | Tashar shigarwa ta gama gari (AGND) |
| 7 | Tashar shigarwa ta gama gari (AGND) |
| 8 | FG |
| 9 | FG |
Alamar LED
| LED no. | LED aiki / bayanin | LED launi |
| 0 | INPUT tashar 0 | Kore |
| 1 | INPUT tashar 1 | Kore |
| 2 | INPUT tashar 2 | Kore |
| 3 | INPUT tashar 3 | Kore |
Matsayin Tashoshin LED
| Matsayi | LED | Nuni |
| Aiki na al'ada | [LED off < 0.5 % (maximum input value)] –
KASHE Channel [LED on > 0.5 % (maximum input value)] – Channel Green |
Aiki na al'ada |
| Kuskuren ikon filin | Duk tashoshi suna maimaita Green da KASHE | Ba a haɗa ƙarfin filin ba |
Ƙimar bayanai / Voltage
Voltage kewayon: 0-10 VDC
| Voltage | 0.0 V | 2.5 V | 5.0 V | 10.0 V |
| Bayanai (Hex) | H0000 | H03FF | H07FF | Farashin H0FFF |
Voltage kewayon: 0-5 VDC
| Voltage | 0.0 V | 1.25 V | 2.5 V | 5.0 V |
| Bayanai (Hex) | H0000 | H03FF | H07FF | Farashin H0FFF |
Voltage kewayon: 1-5 VDC
| Voltage | 1.0 V | 2.0 V | 3.0 V | 5.0 V |
| Bayanai (Hex) | H0000 | H03FF | H07FF | Farashin H0FFF |
Taswirar Bayanai A cikin Teburin Hoto
Bayanan shigarwar module
| Shigarwar Analog Ch 0 |
| Shigarwar Analog Ch 1 |
| Shigarwar Analog Ch 2 |
| Shigarwar Analog Ch 3 |
Shigar da ƙimar hoton
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Shigarwar Analog Ch 0 ƙananan byte | |||||||
| Baiti 1 | Shigarwar Analog Ch 0 babban byte | |||||||
| Baiti 2 | Shigarwar Analog Ch 1 ƙananan byte | |||||||
| Baiti 3 | Shigarwar Analog Ch 1 babban byte | |||||||
| Baiti 4 | Shigarwar Analog Ch 2 ƙananan byte | |||||||
| Baiti 5 | Shigarwar Analog Ch 2 babban byte | |||||||
| Baiti 6 | Shigarwar Analog Ch 3 ƙananan byte | |||||||
| Baiti 7 | Shigarwar Analog Ch 3 babban byte | |||||||
Bayanan Sigar
Ingantacciyar siga: 6 Bytes
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Baiti 0 | Voltage kewayon tashar 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 1 | Voltage kewayon tashar 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 2 | Voltage kewayon tashar 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 3 | Voltage kewayon tashar 0 (H00: 0-10 VDC, H01: 0-5 VDC, H02: 1-5 VDC) | |||||||
| Baiti 4 | Lokacin Tacewa (H00: Tsohuwar tacewa (20) / H01: Mafi sauri - / H3E: A hankali) | |||||||
| Baiti 5 | Ba a amfani (=00) | |||||||
Saitin Hardware
HANKALI
- Koyaushe karanta wannan babin kafin shigar da tsarin!
- Zafi mai zafi! Fuskar gidan na iya zama zafi yayin aiki. Idan ana amfani da na'urar a cikin yanayin yanayin zafi, koyaushe bari na'urar ta yi sanyi kafin ta taɓa ta.
- Yin aiki akan na'urori masu ƙarfi na iya lalata kayan aiki! Koyaushe kashe wutar lantarki kafin aiki akan na'urar.
Bukatun sararin samaniya
Zane-zane masu zuwa suna nuna buƙatun sarari lokacin shigar da samfuran G-jerin. Tazarar tana haifar da sarari don samun iska, kuma yana hana tsangwama na lantarki da aka gudanar daga yin tasiri. Matsayin shigarwa yana aiki a tsaye da a kwance. Hotunan misalai ne kuma maiyuwa ba su kai daidai ba.
HANKALI
RASHIN bin buƙatun sarari na iya haifar da ɓata samfurin.
Dutsen Module zuwa DIN Rail
Babi masu zuwa suna bayyana yadda ake hawan tsarin zuwa dogo na DIN.
HANKALI
Dole ne a daidaita tsarin zuwa layin dogo na DIN tare da maƙallan kullewa.
Dutsen GL-9XXX ko GT-XXXX Module
Umurnai masu zuwa sun shafi waɗannan nau'ikan samfura:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Modulolin GN-9XXX suna da levers na kulle guda uku, ɗaya a ƙasa da biyu a gefe. Don umarnin hawa, koma zuwa Module Dutsen GN-9XXX.
Module Dutsen GN-9XXX
Don hawa ko saukar da adaftar cibiyar sadarwa ko tsarin IO mai tsari tare da sunan samfurin GN-9XXX, don ex.ampGN-9251 ko GN-9371, duba waɗannan umarnin:
Tushen Tasha Mai Cirewa
Don hawa ko saukar da toshe mai cirewa (RTB), duba umarnin da ke ƙasa.
Haɗa igiyoyi zuwa Toshe Tasha Mai Cirewa
To connect/disconnect cables to/from the removable terminal block (RTB), see the instructions Vbelow.
GARGADI
Koyaushe amfani da shawarar samarwa voltage da mita don hana lalacewar kayan aiki da kuma tabbatar da kyakkyawan aiki.
Wurin Wuta da Fil ɗin Bayanai
Sadarwa tsakanin adaftar cibiyar sadarwa ta G-jerin da na'urar fadada, da kuma tsarin / filin samar da wutar lantarki na motocin bas ana aiwatar da su ta hanyar bas na ciki. Ya ƙunshi Fil Power Fil 2 da Fin bayanai 6.
GARGADI
Kar a taɓa bayanan da filayen ikon filin! Taɓawa na iya haifar da lalacewa da lalacewa ta hanyar hayaniyar ESD.
| Fil babu. | Suna | Bayani |
| P1 | Tsarin VCC | Samar da tsarin voltage (5VDC) |
| P2 | Tsarin GND | Tsarin ƙasa |
| P3 | Fitowar alama | Token fitarwa tashar jiragen ruwa na processor module |
| P4 | Serial fitarwa | Mai watsa fitarwa tashar jiragen ruwa na processor module |
| P5 | Shigar da serial | The receiver input port of the processor module |
| P6 | Ajiye | An tanada don alamar wucewa |
| P7 | Filin GND | Filin filin |
| P8 | Filin VCC | Samar da filin voltage (24VDC) |
Tambayoyin da ake yawan yi
- Tambaya: Menene zan yi idan na gamu da kuskure yayin amfani da Module Input Analog na GT-3424?
A: If you encounter an error, refer to the troubleshooting section of the manual to identify and resolve the issue. If the problem persists, contact customer support for assistance. - Q: Zan iya amfani da GT-3424 Analog Input Module tare da voltage jeri wanin 0-5V, 1-5V, ko 0-10V?
A: An tsara tsarin don yin aiki a cikin ƙayyadadden voltage ranges. Using voltages outside these ranges may damage the module and void the warranty.
Takardu / Albarkatu
 |
Beijer ELECTRONICS GT-3424 Analog Input Module [pdf] Manual mai amfani GT-3424, GT-3424 Analog Input Module, Analog Input Module, Input Module, Module |