I-StrikeIt1V
I-Panic Device Controller
Isikhokelo soFakelo

Ngaphezuluview:

I-Altronix StrikeIt 1V iya kusebenza ukuya kuthi ga kwizixhobo ezimbini (2) ze-24VDC ze-panic hardware ngaxeshanye. Yenzelwe ukujongana nemfuno ephezulu yangoku yokutshixa izixhobo zehardware. Isiphumo sokutshixa ngasinye sinesibali-xesha sokulibaziseka esilungisekayo. Iya kulawula iperi yeengcango ngaxeshanye okanye ilawule ngokuzimeleyo iingcango ezimbini zomntu ngamnye. Inomlandeli we-relay kwimveliso nganye yokuqalisa ukuhanjiswa kwangaphandle, i-ADA yokutshintshela ipleyiti yokutshintsha, njl. Ukulibaziseka komlandeli ohambisa iingcango ezizenzekelayo kwiingcango ezihlala zitshixiwe okanye iingcango ezivulwa ngexesha losuku lomsebenzi.
Ukongeza, iivolthi ezincedisayo ezimbini ezingatshintshiyotagIziphumo zibonelelwa ukunika amandla abafundi bamakhadi, iiphedi zamaqhosha, ii-REX PIRs, izibali-xesha zombane, iireyilayi, njl. njl. Iimpawu zesimo se-LED zinikezelwa ukujonga amandla e-AC, isimo se-FACP, kunye nokutshixa ukulawulwa kwee-wiring. Ingqiqo ekrelekrele ibonelela ngokhuseleko ngokuchasene nempazamo yeziphumo zokutshixa.

Iinkcukacha:

Igalelo:

• Igalelo 220VAC, 50/60Hz, 4A.
• Ezimbini (2) AKUKHO amagalelo okuqalisa.
• I-inpuse rating : 6.3A.

Iziphumo:

• Ukhetho lwamandla:
  – Ezimbini (2) 20VDC ukuya 26.4VDC ezilawulwa ngabanye iziphumo zokutshixa usetyenziso olunogcino lwebhetri.
  I-24VDC yosetyenziso ngaphandle kogcino lwebhetri (ii-aplikeshini zase-US kuphela).
  Ireyithingi yangoku ye-15A ye-300ms, i-0.75A yokubonelela ngokuqhubekayo.
  – 5V ukubamba voltage kunye ne-20VDC ukuya kwi-26.4VDC yokuqala ye-100ms pulse.
  Ubuninzi be-5V yokubamba okwangoku kuzo zombini iziphumo yi-0.74A.
• Enye (1) 20VDC ukuya kwi-26.4VDC yezicelo ezinokugcinwa kwebhetri, i-24VDC yezicelo e-US ayifuni ukugcinwa kwebhetri.
  Isiphumo esincedisayo silinganiswe @ 0.75A unikezelo oluqhubekayo lwangoku (Aluchatshazelwa yi-FACP trigger).
• Enye (1) i-12VDC ehluziweyo elawulwayo i-axiliary output rated @ 0.75A in alarm, 0.5A standby current (Ayichatshazelwa yi-FACP trigger).
• Abalandeli ababini (2) benza "A" SPST relay outputs rated @ 0.6A/28VDC.
  Ugqithiso lunika amandla ngelixa igalelo livaliwe.
• Abalandeli ababini (2) abalibazisekileyo Ngokuqhelekileyo i-Open relay iziphumo zilinganiswe @ 0.6A/28VDC.
  Ixesha lokulibazisa likhethwa imizuzwana eyi-0.5 okanye i-1 yesibini. Ubude bexesha elinamandla yisekhondi enye.
• Imveliso yokudluliselwa kwengxaki ibonisa umthamo ophantsi we-DC wemvelisotage.

Ugcino lwebhetri:

• Imikhombandlela yebhetri ibandakanyiwe.
• Ibhetri ye-fuse rating: 25A/32V.
• Ubuninzi bentlawulo ngoku yi-650mA.
• Itshaja eyakhelwe-ngaphakathi ye-asidi yelothe etywiniweyo okanye iibhetri zohlobo lwejeli.
• Ukutshintshela kwibhetri ezenzekelayo xa i-AC isilela.
• Xa kusetyenziswa iibhetri ze-7AH, amandla ebhetri kwindawo yongxamiseko yimizuzu engama-30.

Iimpawu ezibonakalayo:

• Green AC Power LED ibonisa 220VAC ekhoyo.
• Igalelo elibomvu le-LED libonisa imeko yesixhobo soloyiko/ingxaki (esebenzayo, emfutshane okanye evulekileyo isekethe).
• I-Green Fire Alarm Interface (FAI) i-LED ibonisa uqhagamshelo lwe-FACP luvuliwe.
• I-Red Battery LED ibonisa ibhetri ephantsi ngexesha lokungaphumeleli kwe-AC kunye novavanyo lwe-manual.
• I-LED ye-AC eluhlaza ibonisa ukulahlekelwa kwenkathazo ye-AC (engasebenziyo ngexesha lokulandelelana kovavanyo lwe-manual).

NONE

• Ngokuqhelekileyo Ivaliwe i-FACP ifake i-trigger.
• Iinketho zokuqhawula iAlarm yoMlilo eCwangcisiweyo:
  -Isusa amandla kwiziphumo kwaye ikhubaze ukulibaziseka kokuhanjiswa kwabalandeli.
  -Idibanisa amandla ukutshixa iziphumo kwaye yenza ukuba ukulibaziseka kwabalandeli kusebenze.

Iimpawu ezongezelelweyo:

• Uvavanyo lwezandla ukuvumela iimeko zovavanyo lwebhetri.
• Ukukhululwa koloyiko olulungisekayo ukusuka kwi-1 sec. ukuya kuma-30 imizuzwana.
  Phawula: Umlandeli kunye ne-Delay relay iyacima xa i-potentiometer ekhethiweyo ixesha lidlula emva kokukhululwa kwe-trigger yokufaka.
• Cam lock ifakiwe.
  Imilinganiselo yoNdawo (H x W x D malunga): 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)

Imiyalelo yoFakelo lwe-Strikelt1V:

Iindlela zocingo ziya kuhambelana neKhowudi yoMbane yeSizwe/NFPA 70/NFPA 72/ANSI, kunye nazo zonke iikhowudi zendawo kunye namagunya anegunya. Imveliso yenzelwe ukusetyenziswa kwangaphakathi kuphela. Ufakelo lwaseKhanada - i-wiring ekhuselekileyo ye-gauge efanelekileyo kufuneka isetyenziswe. Iyunithi iza kunikezelwa ngenkonzo ngabasebenzi abagunyazisiweyo kwaye isuswe amandla
phambi kokuvulwa.

1. Iyunithi yokunyuka kwindawo enqwenelekayo ngaphakathi kwendawo ekhuselweyo (Ubukhulu boMgama we-Wiring, pg. 6). Phawula kwaye uqhube imingxuma eludongeni ukuze ulungelelanise kunye nemingxuma emibini ephezulu yesitshixo kwindawo ebiyelweyo. Faka iziqhoboshi ezibini eziphezulu kunye nezikrufu eludongeni kunye neentloko ze-screw eziphumayo. Beka imingxuma yezitshixo engaphezulu yesivalo phezu kwezikrufu ezibini ezingaphezulu, umgangatho kwaye ukhuseleke. Phawula indawo yemingxuma emibini engezantsi. Susa indawo ebiyelweyo. Gcoba imingxuma engezantsi kwaye ufake iifasteners ezimbini. Beka imingxunya engaphezulu yesitshixo phezu kwezikrufu ezibini eziphezulu.
   Faka izikrufu ezibini ezisezantsi kwaye uqinisekise ukuba uqinisa zonke izikrufu (Enclosure Dimensions, pg. 12). Ikhabhinethi ekhuselekileyo emhlabeni.
2. Iyunithi ye-Hardware: Qhagamshela amandla e-AC angatshintshiyo (220VAC, 50/60Hz) kwiitheminali eziphawulwe [L, N].
   Sebenzisa i-14 AWG okanye enkulu kulo lonke uqhagamshelwano lwamandla. I-wire eluhlaza ekhuselekileyo ikhokelela kwi-lug yomhlaba.
   Gcina iingcingo zombane ezilinganiselweyo ngokwahlukileyo kwiingcingo ezingenamandla (220VAC, 50/60Hz Igalelo, iiNcingo zeBattery). Ubuncinci besithuba se-0.25 "kufuneka sinikezelwe (umzobo 4, iphe. 10).
   ISILUMKO: Musa ukubamba iindawo zentsimbi ezivelileyo. Vala amandla esekethe yesebe ngaphambi kokufaka okanye ukusevisa izixhobo. Akukho malungu asebenzisekayo ngaphakathi. Ugqithise ufakelo kunye nenkonzo kubasebenzi benkonzo abaqeqeshiweyo.
   Xhuma umhlaba kwi-lug yomhlaba. Musa ukuqhagamshela kwisixhobo esilawulwa sisitshixo. Iyunithi yenzelwe uxhulumaniso olusisigxina usebenzisa inkqubo yentsimbi evaliweyo.
   Phawula: I-StrikeIt1V yenzelwe ukuba idityaniswe ngokusisigxina.
3. Umlinganiselo aux. imveliso voltage phambi kokudibanisa izixhobo. Oku kunceda ukuphepha umonakalo onokwenzeka.
4. Qhagamshela isixhobo se-panic hardware # 1 kwiitheminali eziphawulwe [+ OUT1 –], kwaye uqhagamshele isixhobo se-panic hardware # 2 kwiitheminali eziphawulwe [+ OUT2 –] (Fig. 1, pg. 7). Qinisekisa ukujonga i-polarity. Kwizixhobo ezifuna i-24VDC ephethe umthamotage, setha iswitshi ye-DIP [SW2] ukuya OFF, ye-5VDC ephethe i-voltage, setha iswitshi ye-DIP [SW2] ukuya kwi-ON (Umfanekiso 3b, iphe. 9).
   Izixhobo ze-Panic Hardware kufuneka ziqwalaselwe kwi-Fail-Safe, ubuninzi bokuchasana nocingo kwimveliso nganye yi-0.25 Ohm (jonga i-wiring gauge kunye netshathi yomgama, pg. 6).
   Isixhobo se-panic hardware esebenzayo voltagIngcaciso ye-e kufuneka ifikelele kuluhlu lwe-20VDC ukuya kuma-26.4VDC.
   Phawula: Jonga kuluhlu oluhambelanayo lwesixhobo se-panic hardware, p. 6.
5. Cwangcisa ixesha lokukhutshwa kwemveliso yokutshixa ngokuhlengahlengisa [OUT1] kunye ne [OUT2] potentiometers. Jika i-potentiometer ngokwewotshi ukwandisa ixesha okanye ukuphikisana newotshi ukunciphisa ixesha. Uluhlu lwexesha luyi-300ms. ukuya kwimizuzwana engama-30 (iyunithi iseti yefektri @ 300ms.) (Umfanekiso 3a, iphe. 9).
   Phawula: Xa ulawulo lwangaphandle lwexesha lokuvula ucango lufunwa, oko kukuthi, isifundi sekhadi, misela ixesha elisezantsi (ngokuchasene ngokupheleleyo newotshi).
6. Qhagamshela Ngokuqhelekileyo Vula (NO) Abafowunelwa bomileyo ukusuka kwizixhobo ezisebenzayo ezifana nePhaneli yoLawulo lokuFikelela, i-REX PIR, i-Keypad, njl. ukuya kwiitheminali eziphawulwe [GND, IN1] kunye ne- [GND, IN2] (Fig. 1, pg. 7).
   Phawula: Xa uxhokonxa zombini i-Input 1 kunye ne-Input 2 ukusuka kwisixhobo esisodwa esisebenzayo, setha iswitshi ye-DIP [SW1] ukuya kwi-ON kwimowudi yolandelelwano (ubuninzi be-100 Ohm ukumelana nomgca).
7. Qhagamshela izixhobo ezincedisayo ukuze zinikwe amandla (Iiphedi zeqhosha, izixhobo zokushukuma ze-REX, izibali-xesha zombane, ii-relay zangaphandle) kwiitheminali ezincedisayo zokukhutshwa kwamandla. Kwizixhobo ze-12VDC, sebenzisa iitheminali eziphawulwe [+ 12VDC –].
   Kwizixhobo ze-24VDC zisebenzisa iitheminali eziphawulwe [- 24VDC +] (Umfanekiso 1, iphe. 7).
   Phawula: Ukusebenza ivoltagUluhlu lwesixhobo kufuneka lube yi-20VDC ukuya kwi-26.4VDC okanye ngaphezulu.
8. Qhagamshela izixhobo eziza kulawulwa kwiitheminali eziphawulwe [DELAYED1, DELAYED2] kunye/okanye [FOLLOWER1, FOLLOWER2]. Ifom eyomileyo "A" abafowunelwa balinganiswe @ 600mA / 28VDC (Umfanekiso 1, pg. 7). Lungisa ixesha lokulibaziseka usebenzisa i-DIP iswitshi [SW3] (Umfanekiso 3b, iphe. 9) (0.5 imizuzwana nge SW3 kwindawo OFF, enye (1) yesibini nge [SW3] kwindawo ON). Iyunithi isetelwe i-0.5 imizuzwana yokulibaziseka.
9. Ukuqhobosha uphawu lokuqhawula i-Alarm yoMlilo, ucingo oluqhelekileyo luvaliwe (NC) isiphumo soqhagamshelwano esomileyo esisuka kwiPhaneli yoLawulo lweAlarm yoMlilo ukuya kwiitheminali eziphawulwe [FACP] kunye ne [GND] ye StrikeIt1V.
   I-"FA Khetha" iswitshi ye-DIP [SW4] ibonelela ngeendlela ezimbini (2) zokusebenza (Fig. 3b, pg. 9): a) Ngokutshintsha kwe-DIP [SW4] kwindawo ON, ukusetyenziswa kwe-FACP igalelo lokuqalisa ( isekethe evulekileyo) ngelixa i-Input 1 kunye ne-Input 2 zivuselelwe ziya kubangela ukuba izixhobo ze-panic ze-panic ezivuliwe (ezinamandla) ziphinde zitshixe (de-energize). Ukuhanjiswa kwabalandeli kuya kukhulula (de-energize).
   b) Ngokutshintsha kweDIP [SW4] kwindawo OFF, usetyenziso lwegalelo le-FACP lokuvusa (isekethe evulekileyo) ngelixa iNgeniso 1 kunye neNgeniso yesi-2 zingavuswa ziya kubangela ukuba izixhobo zehardware ezitshixiweyo (zingasebenzi-mandla) zivuleke (zinike amandla. ). Ukuhanjiswa kwabalandeli kuya kuvula (ukunika amandla).
   Ugqithiso olulibazisekileyo luya kunika amandla okomzuzwana.
   Phawula: Nge-SW4 kwindawo ye-OFF, ukusetyenziswa kwegalelo le-FACP yokuqalisa (isiphaluka esivulekileyo) ngelixa i-Input 1 kunye ne-Input 2 zivuselelwe aziyi kuba nefuthe ekusebenzeni kweZiphumo zoku-1 okanye i-2 kunye noMlandeli wabo ohambelanayo okanye ukuhanjiswa okuLibazisekileyo.
10. Xa usebenzisa iibhetri zokuma, kufuneka zibe yi-asidi ekhokelayo okanye uhlobo lwejeli. Iibhetri ze-7AH ziya kunika imizuzu ye-30 yexesha lokugcina. Qhagamshela iibhetri ezimbini (2) ze-12VDC ezifakwe kwingcingo ngokulandelelana kwiitheminali eziphawulwe [+ BAT –].
    Kwizicelo zoLawulo lokuFikelela iibhetri zinokuzikhethela, kwiibhetri zezicelo zaseKhanada ziyafuneka.
    Xa iibhetri zingasetyenziswanga, ilahleko ye-AC iya kukhokelela ekuphulukaneni nomthamo wemvelisotage.
11. Mount UL Uluhlu tamper switsha (Sentrol imodeli 3012 okanye ilingana) phezulu kwindawo ebiyelweyo. Slayida i-tamper utshintshe isibiyeli kumda we-enclosure malunga ne-2" ukusuka kwicala lasekunene (Umfanekiso 3, iphe. 9).
    Qhagamshela tamper switsha iingcingo kwiPaneli yoLawulo loFikelelo igalelo okanye isixhobo esifanelekileyo sokunika ingxelo ngeUL. Ukuvula isignali yesivusi vula ucango lwendawo ebiyelweyo.
    Phawula: Ungagqithi kumthamotage kunye neereyithingi zangoku ze-tamptshintsha.
    Nceda bhekisa ku-tamper tshintsha imiyalelo yofako.
12. Ekugqityweni kocingo olubiyelweyo olukhuselekileyo olunezikrufu okanye isitshixo sekhamera (sinikezelwe).

StrikeIt1V LED Diagnostics:

I-LED	Imeko ye-LED	I-Panic Device Controller Status
Amandla oLuhlaza (AC)	On	Imeko yokusebenza eqhelekileyo.
	Cimile	Ukulahleka kwe-AC.
INP1 – Igalelo le-Red Trigger 1	On	Imveliso 1 – Inamandla.
	Cothisa Blink	Isiphumo 1 – Vula iSekethe.
	Ukuqhwanyaza ngokukhawuleza	Isiphumo 1 - ISekethe emfutshane.
	Cimile	Isiphumo soku-1 – Ukuphelelwa amandla.
INP2 – Igalelo le-Red Trigger 2	On	Imveliso 2 – Inamandla.
	Cothisa Blink	Isiphumo 2 – Vula iSekethe.
	Ukuqhwanyaza ngokukhawuleza	Isiphumo 2 - ISekethe emfutshane.
	Cimile	Isiphumo soku-2 – Ukuphelelwa amandla.
I-FAI-Green	On	Ungeniso lwe-FACP lucushiwe (imeko ye-alarm).
	Cimile	FACP eqhelekileyo (imeko engeyo-alarm).
I-BAT iNgxaki eBomvu	Cimile	Imeko eqhelekileyo.
	On	Uvavanyo lwezandla luqalisiwe.
	Cothisa Blink	Ibhetri iphantsi okanye ayikho, iyasebenza ngexesha lovavanyo lwezandla, okanye ukusilela kwe-AC.
AC Ingxaki Green	Cimile	AC eqhelekileyo.
	Ukuqhwanyaza kancinci	I-AC iphantsi okanye ilahlekile.

Ukuchongwa kweSitena seStrikeIt1V:

Ixesha lesiphelo	Umsebenzi/Inkcazo
L, G, N	Qhagamshela i-220VAC, 50/60 Hz kwezi terminals: L ukuya kuHot, N ukuya kwiNdawo.
+ 12VDC –	I-12VDC i-Axiliary Output @ 0.75A kwi-alamu, i-0.5A kwi-stand-by.
+ 24VDC –	24VDC Isiphumo esiNcedisayo @ 0.75A. 20VDC ukuya 26.4VDC ukwenzela izicelo ngebhetri back-up.
#IGAMA?	I-24VDC i-Stand-by Connection yeBattery (ezimbini (2) iibhetri ze-12VDC ezifakwe kwi-series).
– OUT 1 +	Qhagamshela i-24VDC Panic Hardware Device #1 (Jonga itshathi yokuhambelana kwezinye izixhobo ezifakwe kuLuhlu lwe-UL. Uluhlu olusebenzayo lwesixhobo kufuneka lugubungele i-20VDC ukuya kwi-26.4VDC uluhlu lwe-0.25 Ohm ubuninzi be-wiring resistance).
– OUT 2 +	Qhagamshela 24VDC Panic Hardware Isixhobo #2. (Jonga itshathi yokuhambelana nezinye izixhobo ezifakwe kwi-UL. Uluhlu olusebenzayo lwesixhobo kufuneka lufake i-20VDC ukuya kwi-26.4VDC uluhlu lwe-0.25 Ohm ubuninzi be-wiring resistance).
FACP / GND	Ngokuqhelekileyo uQhagamshelwano oluValwe ngoMlilo oluvela kuLawulo lwe-Alarm yoMlilo (i-100 Ohm ubuninzi bokuxhathisa i-wiring).
IN1 / GND	Ngokuqhelekileyo i-Open Trigger input controls Output 1. Inokuthi ibanjwe ivaliwe ukuvula ixesha elide (i-100 Ohm ubuninzi be-wiring resistance).
IN2 / GND	Ngokuqhelekileyo i-Open Trigger input controls Output 2. Inokuthi ibanjwe ivaliwe ukuvula ixesha elide (i-100 Ohm ubuninzi be-wiring resistance).
Ilibazisekile 1	Ifom eyomileyo "A" abafowunelwa banikezela nge-1-yesibini i-pulse yesikhashana emva kokulibaziseka kwangaphambili. Ngokutshintsha kwe-DIP [SW3] kwindawo OFF, ukulibaziseka yimizuzwana eyi-0.5. Ngokutshintsha kwe-DIP [SW3] kwindawo ye-ON, ukulibaziseka ngumzuzwana we-1 (Umfanekiso 3b, iphe. 9). Oku kuvumela i-Panic Hardware Device ukuba ivuleke ngokupheleleyo phambi kokuba isayine i-auto operator ukuba ijiwuze ucango.
Ilibazisekile 2	Ifom eyomileyo "A" abafowunelwa banikezela nge-1-yesibini i-pulse yesikhashana emva kokulibaziseka kwangaphambili. Ngokutshintsha kwe-DIP [SW3] kwindawo OFF, ukulibaziseka yimizuzwana eyi-0.5. Ngokutshintsha kwe-DIP [SW3] kwindawo ye-ON, ukulibaziseka ngumzuzwana we-1 (Umfanekiso 3b, iphe. 9). Oku kuvumela i-Panic Hardware Device ukuba ivuleke ngokupheleleyo phambi kokubonisa umqhubi wemoto kucango lokujingi.
Umlandeli 1	Ifom eyomileyo "A" umfowunelwa. Inika amandla ngelixa imveliso 1 inamandla. Ivumela ipleyiti yokutshintsha ye-ADA ivule i-auto operator ngelixa ucango luvuliwe. Icima isebenze ngaphandle kwe-ADA actuator ngelixa ucango lutshixiwe.
Umlandeli 2	Ifom eyomileyo "A" umfowunelwa. Inika amandla ngelixa imveliso 2 inamandla. Ivumela ipleyiti yokutshintsha ye-ADA ivule i-auto operator ngelixa ucango luvuliwe. Icima isebenze ngaphandle kwe-ADA actuator ngelixa ucango lutshixiwe.
Ukongamela	Ibonisa umthamo ophantsi we-DC wemvelisotage imeko. Isenokubangelwa yi-AC brownout kunye nebhetri ephantsi eyenzeka ngaxeshanye. Ukuzivavanya okwenziwa ngesandla kufuneka kwenziwe ukumisela imeko yebhetri.

Izixhobo ezihambelana nePanic Hardware:

Umenzi	Inombolo yoMfanekiso
Ukhetho lokuqala	I-3600-IsiXhobo esifihliweyo sokuPhuma ngentonga engu-3700-iRim Latching Phuma isixhobo
Kawneer	EL Paneline Phuma Isixhobo
UVon Duprin®	EL98 Series Panic Hardware kunye Electric Latch Retraction
NGUYE	7500 Uqhankqalazo loMbane

Ubuninzi beTheyibhile yoMgama woNxibelelaniso:
Ubuninzi be-0.25 Ohm ukuchasana kweengcingo zokudibanisa ziyamkeleka, jonga itshathi engezantsi kwi-wire gauge kunye nemigama.

I-Wire Gauge	Umgama
14 AWG Stranded	40 ft.
12 AWG Stranded	60 ft.
10 AWG Stranded	100 ft.

Phawula: Ukusebenza ngokuzimeleyo kwe-Output 1 kunye ne-2, qhagamshela AKUKHO umnxibelelwano owomileyo phakathi kwe-IN1 kunye ne-GND kunye / okanye i-IN2 kunye ne-GND.
Ukusebenza ngokulandelelana kwe-OUT1 kunye ne-OUT2 faka i-jumper phakathi kwe-IN1 kunye ne-IN2 kunye ne-jumper phakathi kwee-terminals ze-GND zombini.

Qaphela: I-StrikeIt1 yenzelwe ukusetyenziswa kunye ne-VON DUPRIN® izixhobo ze-panic hardware.
I-VON DUPRIN® luphawu lwentengiso olubhalisiweyo lwe-Allegion.

IiMfuno zoNxibelelwano ezinoMda oMda we-NEC we-StrikeIt1V Model:
I-wiring yesekethe ye-power-limited kunye ne-non-power-limited circuiting kufuneka ihlale ihlukaniswe kwikhabhinethi. Zonke ii-wiring zesekethe ezisikelwe umda kufuneka zihlale ubuncinane ziyi-0.25” kude nakweyiphi na iingcingo zesekethe ezingenamandla. Ngaphezu koko, zonke ii-wiring zesekethe ezilinganiselweyo kunye ne-non-power-limited circuit wiring kufuneka zingene kwaye ziphume kwikhabhinethi ngee-conduits ezahlukeneyo.
Omnye onjalo example yale iboniswe ngezantsi. Isicelo sakho esithile sinokufuna ukunkqonkqozwa kombhobho okwahlukileyo ukuba kusetyenziswe. Nakuphi na ukunkqonkqozwa kombhobho kunokusetyenziswa. Ukusetyenziswa kwamandla alinganiselweyo, ukusetyenziswa kwee-conduits kuyakhethwa. Lonke uqhagamshelo lweingcingo endle kufuneka lwenziwe kuqashwe igeyiji efanelekileyo yocingo oluyi-CM okanye iFPL yocingo olufakwe ibhatyi (okanye ibambela elilingana nalo).
Phawula: Bhekisela kumzobo wokuphatha ucingo ongezantsi ngendlela efanelekileyo yokufaka i-CM okanye i-FPL yocingo lwebhatyi (umzobo 4a).

Ugcino:

Iyunithi kufuneka ivavanywe kanye ngonyaka ubuncinane malunga nokusebenza okufanelekileyo ngolu hlobo lulandelayo:

Ulongamelo lwe-FACP:
Ukuqinisekisa uqhagamshelo olululo kunye nokusebenza kwe-Alarm yokuqhawula uqhagamshelo, susa ucingo kwitheminali ephawulwe [FACP] kwi-StrikeIt1V. Ngokutshintsha kwe-DIP [SW4] kwimo ON, i-Panic Hardware Devices evuliweyo iya kuvula. Ngokutshintsha kwe-DIP [SW4] kwindawo OFF (Fig. 3b, pg. 9), itshixiwe I-Panic Hardware Devices iya kuphinda itshixe.
Imveliso Voltage Uvavanyo: Phantsi kweemeko zomthwalo eziqhelekileyo i-DC output voltage kufuneka ikhangelwe umthamo ofanelekileyotagInqanaba.
Uvavanyo lwebhetri:
Phantsi kweemeko eziqhelekileyo zomthwalo khangela ukuba ibhetri ihlawuliswe ngokupheleleyo, kwaye ukhangele i-voltage echaziweyotage zombini kwitheminali yebhetri nakwiitheminali zebhodi eziphawulwe [+ BAT –] ukuqinisekisa ukuba akukho khefu kwiintambo zoqhagamshelo lwebhetri. Cofa iqhosha lovavanyo lweManuwali.
Ibhetri ye-LED kufuneka ikhanyise ngexesha lokuzivavanya (malunga nemizuzwana ye-15.
Xa i-LED yebhetri idanyaza kancinane, oku kubonisa ukuba ibhetri iphantsi okanye ilahlekile kwaye kunokufuneka itshintshwe okanye inikwe inkonzo.
Phawula: Ubuninzi bokutshaja okwangoku phantsi kokukhutshwa yi-650mA.
Phawula: Ubomi bebhetri obulindelekileyo yiminyaka emi-5; nangona kunjalo kuyacetyiswa ukuba utshintshe iibhetri kwiminyaka emi-4 okanye ngaphantsi xa kufuneka.
Isilumkiso:
Ukukhusela ngokuqhubekayo kumngcipheko wokutshatyalaliswa kombane kunye neengozi zomlilo, buyisela i-fuse yegalelo kunye nohlobo olufanayo kunye nokulinganisa: 6.3A / 250V.
Musa ukuveza imvula okanye ukufuma; ukusetyenziswa kwangaphakathi kuphela.

Imilinganiselo Yendawo Evalekileyo:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)

I-Altronix ayinaxanduva lwazo naziphi na iimpazamo zokuchwetheza.
140 58th Street, Brooklyn, New York 11220 USA
ifowuni: 718-567-8181
ifeksi: 718-567-9056
webindawo: www.altronix.com
i-imeyile: info@altronix.com
Iwaranti yobomi bonkeIsikhokelo sokuFakelo seStrikeIt1V

Amaxwebhu / Izibonelelo

	I-Altronix StrikeIt1V I-Panic yesiLawuli saMandla seSixhobo [pdf] Isikhokelo soFakelo I-StrikeIt1V, i-Panic Device Controller, i-StrikeIt1V ye-Panic yesiLawuli saMandla
	I-Altronix STRIKEIT1V i-Panic Device Controller [pdf] Isikhokelo soFakelo I-STRIKEIT1V, i-Panic Device Controller, i-STRIKEIT1V i-Panic Device Controller, i-Device Power Controller, isiLawuli

Iimbekiselo

• Incwadi yokusebenzisa