StrikeIt1V
Tšabo ea Sesebelisoa sa Matla a Matla
Tataiso ea ho Kena
Fetileview:
Altronix StrikeIt 1V e tla sebetsa ho fihlela ho lisebelisoa tse peli (2) 24VDC tsa panic hardware ka nako e le 'ngoe. E etselitsoe ho sebetsana le tlhokeho e phahameng ea hajoale ea lisebelisoa tsa ho notlela lisebelisoa tsa lisebelisoa. Ntho e 'ngoe le e 'ngoe ea senotlolo e na le sebali sa ho lieha ho koala sekheo. E tla laola para ea mamati ka nako e le 'ngoe kapa ka boikemelo ho laola mamati a mabeli a motho ka mong. E na le molateli bakeng sa tlhahiso e 'ngoe le e' ngoe ho qala li-relay tsa kantle, li-switches tsa ADA push plate, joalo-joalo. Li-relay tsa latella tse liehang li laola li-outo operators tsa mamati a lulang a notletsoe kapa bakeng sa mamati a notleloang nakong ea letsatsi la khoebo.
Ho phaella moo, tse peli tse un-switched axiliary voltagLiphetho li fanoa bakeng sa ho matlafatsa libali tsa likarete, li-keypad, REX PIRs, li-timers tsa elektroniki, li-relay, joalo-joalo. Khokahano e hlophisehang ea FACP e tla fana ka matla kapa e tlose matla ho linotlolo ha e kentsoe tšebetsong. Lits'oants'o tsa boemo ba LED li fanoa ho lekola matla a AC, boemo ba FACP, le taolo ea lithapo tsa senotlolo. Mahlale a bohlale a fana ka tšireletso khahlano le khaello ea phoso ea lintlha tsa senotlolo.
Litlhaloso:
Kenyo:
- Kenyelletso 220VAC, 50/60Hz, 4A.
- Tse peli (2) HA HO lintlha tse kenyang letsoho.
- Lintlha tse kenyang fuse: 6.3A.
Liphetho:
- Likhetho tsa matla:
- Liphetho tse peli (2) 20VDC ho isa ho 26.4VDC tse laoloang ka bonngoe bakeng sa lits'ebetso tse nang le bekapo ea betri.
24VDC bakeng sa lits'ebetso ntle le ho boloka betri (lits'ebetso tsa US feela).
Tekanyetso ea hajoale ea 15A bakeng sa 300ms, 0.75A phepelo e tsoelang pele ea hajoale.
- 5V e tšoereng voltage nang le 20VDC ho 26.4VDC qalong ea 100ms pulse.
Palo e kholo ea 5V e ts'oereng hajoale ea liphetho ka bobeli ke 0.74A. - E le 'ngoe (1) 20VDC ho 26.4VDC bakeng sa lits'ebetso tse nang le bekapo ea betri, 24VDC bakeng sa lits'ebetso tsa US tse sa hlokeng ho boloka betri.
Sehlahisoa se thusang se rated @ 0.75A phepelo e tsoelang pele (Ha e angoe ke FACP trigger). - E le 'ngoe (1) 12VDC e tlhotliloeng e laoloang e thusang tlhahiso e behiloeng @ 0.75A ka alamo, 0.5A standby current (Ha e angoe ke FACP trigger).
- Balateli ba babeli (2) ba theha "A" SPST relay results rated @ 0.6A/28VDC.
Li-relay li matlafatsa ha ho kenya ho koetsoe. - Balateli ba babeli (2) ba liehile Ka tloaelo Open relay results ba rated @ 0.6A/28VDC.
Nako ea ho lieha e ka khethoa metsotsoana e 0.5 kapa motsotsoana o le mong. Nako ea matla ke motsotsoana o le 1. - Sephetho sa mathata sa relay se bonts'a molumo o tlase oa DCtage.
Boloka Battery:
- Lisebelisoa tsa betri li kenyelelitsoe.
- Tekanyetso ea fuse ea betri: 25A/32V.
- Tefo e phahameng ea hajoale ke 650mA.
- Chaja e hahelletsoeng ka hare bakeng sa asiti ea lead e tiisitsoeng kapa libeteri tsa mofuta oa gel.
- Jarolla ka ho iketsa ho ea stand-by betri ha AC hloleha.
- Ha ho sebelisoa libeteri tsa 7AH, matla a betri bakeng sa boemo ba tšohanyetso ke metsotso e 30.
Matšoao a bonoang:
- Green AC Power LED e bonts'a 220VAC e teng.
- Li-LED tse kenyang li-trigger tse khubelu li bonts'a boemo ba sesebelisoa sa ho tšoha / bothata (se kentsoeng, se khuts'oane kapa se bulehileng).
- Green Fire Alarm Interface (FAI) LED e bonts'a hore FACP e hakoa e kentsoe tšebetsong.
- Red Battery LED e bonts'a betri e tlase nakong ea ho hloleha ha AC le tlhahlobo ea matsoho.
- Green AC LED e bonts'a tahlehelo ea bothata ba AC (ha e sebetse nakong ea tatellano ea tlhahlobo ea matsoho).
Khaola Alarm ea Mollo:
- Ka tloaelo ho Koetsoe FACP e kenya letsoho.
- Likhetho tse ka khonehang tsa ho khaola Alarm ea Mollo:
- E tlosa matla ho liphetho le ho tima li-relay tse liehang tsa balateli.
- E hokela matla ho notlela liphetho mme e nolofalletsa balateli ba morao-rao ba liehile.
Likarolo tse Eketsehileng:
- Teko ea matsoho ho lumella maemo a betri ea teko.
- Phetoho e ka feto-fetohang ea ho tšoha ho tloha motsotsong o le mong. ho isa ho metsotsoana e 1.
Hlokomela: Follower and Delay relay e tima ha nako e khethiloeng ea potentiometer e feta kamora ho lokolloa ha mochini o kenang. - Cam notlela e kenyelelitsoe.
Bophahamo ba Sebaka (H x W x D hoo e ka bang.): 13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.6mm)
Litaelo tsa ho kenya Strikelt1V:
Mekhoa ea likhoele e tla tsamaellana le Khoutu ea Naha ea Motlakase/NFPA 70/NFPA 72/ANSI, le likhoutu tsohle tsa lehae le ba boholong ba nang le matla a ho laola. Sehlahisoa se reretsoe ho sebelisoa ka tlung feela. Bakeng sa lisebelisoa tsa Canada - wiring e sirelelitsoeng ea gauge e loketseng e tlameha ho sebelisoa. Yuniti e lokela ho sebetsoa ke basebetsi ba lumelletsoeng le ho felloa ke matla
pele ho buloa.
- Beha yuniti sebakeng se lakatsehang ka har'a sebaka se sirelelitsoeng (Boholo ba Wiring Distance, pg. 6). Tšoaea le ho phunya masoba leboteng ho tsamaisana le likoti tse peli tse ka holimo sebakeng se kampetsoeng. Kenya li-fasteners le li-screws tse peli leboteng 'me lihlooho tsa screw li hlahelle. Beha masoba a ka holimo a koaletsoeng holim'a likurufu tse peli tse ka holimo, u be boemong 'me u sireletsehe. Tšoaea boemo ba likoti tse peli tse tlase. Tlosa sebaka se kampetsoeng. Hlakola likoti tse tlase ebe u kenya li-fasteners tse peli. Beha masoba a ka holimo a kokelo holim'a likurufu tse peli tse ka holimo.
Kenya li-screw tse peli tse tlase 'me u tiise hore u tiisa li-screw tsohle (Enclosure Dimensions, pg. 12). Sireletsa khabinete fatše fatše. - Hardwire unit: Hokela matla a AC a sa fetoheng (220VAC, 50/60Hz) ho litheminale tse tšoailoeng [L, N].
Sebelisa 14 AWG kapa e kholoanyane bakeng sa likhokahano tsohle tsa matla. Sireletsehile terata e tala lebisa fatše lug.
Boloka likhoele tse lekanyelitsoeng matla li arohane le likhoele tse se nang matla (220VAC, 50/60Hz Input, Lithapo tsa Battery). Ho tlameha ho fanoe ka sebaka se fokolang sa 0.25 "(Setšoantšo sa 4, leqephe la 10).
TLHOKOMELISO: U se ke ua tšoara likarolo tsa tšepe tse pepenene. Koala matla a potoloho ea lekala pele u kenya kapa u sebeletsa lisebelisoa. Ha ho na likarolo tse ka sebelisoang ke mosebelisi kahare. Fetisetsa ho kenya le ho fana ka litšebeletso ho basebeletsi ba nang le tsebo.
Kopanya mobu oa lefats'e ho ea fatše. Se ke oa hokela sesebelisoa se laoloang ke switch. Yuniti e reretsoe ho hokahanya ka ho sa feleng ho sebelisa sistimi e kentsoeng ea tšepe.
Hlokomela: StrikeIt1V e reretsoe hore e hokahane ka ho sa feleng. - Lekanya aux. tlhahiso voltage pele o kopanya lisebelisoa. Sena se thusa ho qoba tšenyo e ka bang teng.
- Hokela ho tšoha sesebediswa # 1 ho li-terminals tšoauoa [+ OUT1 -], 'me hokela ho tšoha hardware sesebediswa # 2 ho terminals tšoauoa [+ OUT2 -] (sa feiga. 1, pg. 7). Etsa bonnete ba ho hlokomela polarity. Bakeng sa lisebelisoa tse hlokang 24VDC e tšoereng voltage, seta switjha ya DIP [SW2] ho TIMA, bakeng sa 5VDC e tshwereng voltage, beha DIP switjha [SW2] ho ON (sa feiga. 3b, leqepheng la. 9).
Lisebelisoa tsa Panic Hardware li tlameha ho lokisoa ho Fail-Safe, ho hanyetsa mohala o phahameng ka ho fetisisa bakeng sa tlhahiso ka 'ngoe ke 0.25 Ohm (sheba wiring gauge le chate ea sebaka, pg. 6).
The panic hardware device e sebetsang voltagLitlhaloso tsa e li tlameha ho akaretsa 20VDC ho isa ho 26.4VDC.
Hlokomela: Sheba lethathamo le tsamaellanang la lisebelisoa tsa hardware tsa panic, maq. 6. - Beha nako ea tokollo ea senotlolo ka ho lokisa [OUT1] le [OUT2] potentiometers. Fetola potentiometer ho ea ka nako ho eketsa nako kapa khahlano le oache ho fokotsa nako. Nako ea nako ke 300ms. ho metsotsoana e 30 (yuniti ke fektheri e behiloeng @ 300ms.) (Setšoantšo sa 3a, leqephe la 9).
Hlokomela: Ha taolo ea kantle ea nako ea ho notlolla menyako e lakatseha, ke hore, 'mali oa karete, beha nako ho bonyane (ka ho felletseng khahlanong le oache). - Hokela Ka tloaelo Open (NO) Dry Contacts ho tloha ho lisebelisoa tse kenyang ts'ebetso tse kang Access Control Panel, REX PIR, Keypad, joalo-joalo ho li-terminals tse tšoailoeng [GND, IN1] le [GND, IN2] (Fig. 1, pg. 7).
Hlokomela: Ha o qala ho Kena 1 le Kenyeletso 2 ho sesebelisoa se le seng sa actuating, seta switjha ea DIP [SW1] ho ON bakeng sa mokhoa oa tatellano (100 Ohm line resistance maximum). - Hokela lisebelisoa tse tlatselletsang hore li sebelisoe (Li-keypad, li-detectors tsa REX, li-timers tsa elektroniki, li-relay tsa kantle) ho li-terminals tse thusang tse thusang tse hlahisang matla. Bakeng sa lisebelisoa tsa 12VDC, sebelisa li-terminals tse tšoailoeng [+ 12VDC –].
Bakeng sa lisebelisoa tsa 24VDC li sebelisa li-terminals tse tšoailoeng [- 24VDC +] (Setšoantšo sa 1, pg. 7).
Hlokomela: Tshebetso voltagmefuta ea lisebelisoa e lokela ho ba 20VDC ho 26.4VDC kapa ho feta. - Hokela lisebelisoa tse tla laoloa ho litheminale tse tšoailoeng [DELAYED1, DELAYED2] le/kapa [FOLLOWER1, FOLLOWER2]. Mabitso a "A" a omileng a lekantsoe @ 600mA / 28VDC (setšoantšo sa 1, leqephe la 7). Fetola nako ea ho lieha ho sebelisa sesebelisoa sa DIP [SW3] (setšoantšo sa 3b, leqephe la 9) (metsotsoana e 0.5 ka SW3 sebakeng sa OFF, motsotsoana o le mong (1) ka [SW3] sebakeng sa ON). Yuniti e behiloe feme bakeng sa ho lieha ka metsotsoana e 0.5.
- Ho hokela tšobotsi ea ho Khaola Alamo ea Mollo, hokela terata eo hangata e koetsoeng (NC) e ommeng e tsoang ho Phanele ea Taolo ea Alamo ea Mollo ho ea liteisheneng tse tšoailoeng [FACP] le [GND] ea StrikeIt1V.
"FA Select" DIP switch [SW4] e fana ka mekhoa e 'meli (2) ea ts'ebetso (setšoan butle-butle) ha Input 3 le Input 9 li hlahisoa li tla etsa hore lisebelisoa tsa hardware tse sa notleloang (tse matlafalitsoeng) li notleloe hape (ho fokotsa matla). Li-relay tsa balateli li tla lokolloa (de-energize).
b) Ha sesebelisoa sa DIP [SW4] se le maemong a OFF, ts'ebeliso ea "FACP trigger input" (open circuit) ha Input 1 le Input 2 e sa ts'oaroe e tla etsa hore lisebelisoa tsa hardware tse notletsoeng (tse sa sebetseng) li notleloe (ho matlafatsa). ). Li-relay tsa balateli li tla kenya tšebetsong (ho matlafatsa).
Li-relay tse liehang li tla matlafatsa nakoana.
Hlokomela: Ha SW4 e le maemong a OFF, ts'ebeliso ea "FACP trigger input" (open circuit) ha Input 1 le Input 2 e ntse e ts'oaroa e ke ke ea ba le phello ts'ebetsong ea Output 1 kapa Output 2 le Molateli oa bona o tsamaellanang kapa li-relay tse liehang. - Ha u sebelisa libeteri tse emeng, li tlameha ho ba acid ea lead kapa mofuta oa gel. Libetri tsa 7AH li tla fana ka metsotso e 30 ea nako ea ho boloka. Hokela libeteri tse peli (2) tsa 12VDC tse kentsoeng mehala ho litheminale tse tšoailoeng [+ BAT –].
Bakeng sa lits'ebetso tsa Access Control, libeteri ke boikhethelo, bakeng sa lits'ebetso tsa Canada ho hlokahala libeteri.
Ha libetri li sa sebelisoe, tahlehelo ea AC e tla fella ka tahlehelo ea matla a tlhahisotage. - Thaba ea UL Listed tamper switjha (Sentrol ea mohlala 3012 kapa e lekanang) ka holimo ho kampetsoeng. Tsamaisa tamper switch bracket ho ea moeling oa sebaka se koaletsoeng hoo e ka bang 2 "ho tloha ka lehlakoreng le letona (setšoantšo sa 3, leqephe la 9).
Kopanya tamper switch wiring ho ea ho Access Control Panel kapa sesebelisoa se nepahetseng sa tlaleho se Lethathameng la UL. Ho kenya letshwao la alamo tshebetsong bula lemati la kampereho.
Hlokomela: U se ke ua feta bophahamo ba modumotage le litekanyetso tsa hajoale tsa tampfapoha.
Ka kopo, sheba tamplitaelo tsa ho kenya er switjha. - Ha ho qetile ho kenya lemati le koetsoeng le sireletsehileng le nang le likurufu kapa senotlolo sa cam (ho fanoe).
Tlhahlobo ea LED ea StrikeIt1V:
| LED | Boemo ba LED | Boemo ba Bolaoli ba Matla a Sesebelisoa sa Tšabo |
| Botala ba Matla (AC) | On | Boemo bo tloaelehileng ba ts'ebetso. |
| E tima | Tahlehelo ea AC. | |
| INP1 - Kenyelletso ea Red Trigger 1 | On | Sephetho sa 1 - E matlafalitsoe. |
| Butle Blink | Sephetho sa 1 - Potoloho e Bulehileng. | |
| Ho panya ka potlako | Sephetho sa 1 - Potoloho e Khutšoane. | |
| E tima | Sephetho sa 1 - Ho felloa ke matla. | |
| INP2 - Kenyelletso ea Red Trigger 2 | On | Sephetho sa 2 - E matlafalitsoe. |
| Butle Blink | Sephetho sa 2 - Potoloho e Bulehileng. | |
| Ho panya ka potlako | Sephetho sa 2 - Potoloho e Khutšoane. | |
| E tima | Sephetho sa 2 - Ho felloa ke matla. | |
| FAI - Botala | On | Kenyo ya FACP e qadile (boemo ba alamo). |
| E tima | FACP e tloaelehileng (boemo boo e seng alamo). | |
| BAT Bothata Bofubelu | E tima | Boemo bo tloaelehileng. |
| On | Teko ea matsoho e qalile. | |
| Butle Blink | Betri e tlase kapa ha e eo, e sebetsa nakong ea teko ea matsoho, kapa ha AC e hlolehile. | |
| AC Bothata Botala | E tima | AC e tloaelehileng. |
| Ho panya butle | AC e tlase kapa e sieo. |
Boitsebiso ba Seteishene sa StrikeIt1V:
| Terminal Taba | Mosebetsi/Tlhaloso |
| L, G, N | Hokela 220VAC, 50/60 Hz ho li-terminals tsena: L ho ea ho Hot, N ho ea ho Neutral. |
| + 12VDC | 12VDC Auxiliary Output @ 0.75A ka alamo, 0.5A boemong ba ho ema. |
| + 24VDC | Sephetho sa Thuso sa 24VDC @ 0.75A. 20VDC ho isa ho 26.4VDC bakeng sa lits'ebetso tse nang le bekapo ea betri. |
| # LEBITSO? | 24VDC Stand-by Battery Connection (Libetri tse peli (2) tsa 12VDC tse kentsoeng ka marang-rang ka lihlopha). |
| – TSOA 1 + | Hokela 24VDC Panic Hardware Device #1 (Sheba chate e lumellanang bakeng sa lisebelisoa tse ling tsa UL tse thathamisitsoeng. Sebaka sa ts'ebetso sa sesebelisoa se tlameha ho koahela 20VDC ho 26.4VDC range 0.25 Ohm boholo ba ho hanyetsa wiring). |
| – TSOA 2 + | Hokela 24VDC Panic Hardware sesebelisoa #2. (Sheba chate e lumellanang bakeng sa lisebelisoa tse ling tsa UL Listed. Sebaka sa ts'ebetso sa sesebelisoa se tlameha ho koahela 20VDC ho 26.4VDC range 0.25 Ohm maximum wiring resistance). |
| FACP / GND | Ka tloaelo ho Koaletsoe ho Omella ho tsoa ho Taolo ea Alarm ea Mollo (100 Ohm e phahameng ea ho hanyetsa wiring). |
| IN1 / GND | Ka tloaelo Open Trigger input controls Output 1. E ka ts'oaroa e koetsoe bakeng sa ho notlolla nako e telele (100 Ohm maximum wiring resistance). |
| IN2 / GND | Ka tloaelo Open Trigger input controls Output 2. E ka ts'oaroa e koetsoe bakeng sa ho notlolla nako e telele (100 Ohm maximum wiring resistance). |
| E liehile 1 | Mabitso a "A" a omileng a fana ka molumo oa motsotsoana o le mong ka mor'a tieho e behiloeng esale pele. Ha sesebelisoa sa DIP [SW1] se le maemong a OFF, tieho ke metsotsoana e 3. Ka sesebelisoa sa DIP [SW0.5] sebakeng sa ON, tieho ke motsotsoana oa 3 (setšoantšo sa 1b, leqephe la 3). Sena se lumella Panic Hardware Device hore e notlolle ka botlalo pele e bontša opareitara ea koloi hore e tsokotse lemati. |
| E liehile 2 | Mabitso a "A" a omileng a fana ka molumo oa motsotsoana o le mong ka mor'a tieho e behiloeng esale pele. Ha sesebelisoa sa DIP [SW1] se le maemong a OFF, tieho ke metsotsoana e 3. Ka sesebelisoa sa DIP [SW0.5] sebakeng sa ON, tieho ke motsotsoana oa 3 (setšoantšo sa 1b, leqephe la 3). Sena se lumella Sesebediswa sa Panic Hardware ho notlolla ka botlalo pele se saena opareitara ya koloi lemating la swing. |
| Molatedi 1 | Ho omella ka sebopeho sa "A". E matlafatsa ha tlhahiso ea 1 e ntse e matlafatsoa. E thusa ka ntle ho ADA switch plate ho kenya tšebetsong opareitara ea koloi ha lemati le notletsoe. E tima ka ntle ho ADA actuator ha lemati le notletsoe. |
| Molatedi 2 | Ho omella ka sebopeho sa "A". E matlafatsa ha tlhahiso ea 2 e ntse e matlafatsoa. E thusa ka ntle ho ADA switch plate ho kenya tšebetsong opareitara ea koloi ha lemati le notletsoe. E tima ka ntle ho ADA actuator ha lemati le notletsoe. |
| Tlhokomelo | E bonts'a matla a tlase a DCtagboemo ba e. E kanna ea bakoa ke AC brownout le betri e tlase e etsahalang ka nako e le 'ngoe. Ho itlhahloba ka letsoho ho hloka ho etsoa ho fumana boemo ba betri. |
Lisebelisoa tse tsamaellanang tsa Panic Hardware:
| Moetsi | Nomoro ea Mohlala |
| Khetho ea Pele | 3600 - Sesebelisoa se patehileng sa ho Tsoa ka Lere la 3700 - Sesebelisoa sa ho Tsoa sa Rim Latching |
| Kawneer | EL Paneline Tloha Sesebelisoa |
| Von Duprin® | EL98 Series Panic Hardware le Electric Latch Retraction |
| TS'ELISO | 7500 Ho Oa Motlakase |
Bolelele ba Tafole ea Bohole ba Wiring:
Boholo ba 0.25 Ohm khanyetso ea lithapo tse hokelang lia amoheleha, sheba chate e ka tlase bakeng sa gauge ea terata le libaka.
| Mohala oa terata | Sebaka |
| 14 AWG Stranded | 40ft. |
| 12 AWG Stranded | 60ft. |
| 10 AWG Stranded | 100ft. |
Hlokomela: Bakeng sa ts'ebetso e ikemetseng ea Output 1 le 2, hokela NO e ommeng pakeng tsa IN1 le GND le/kapa IN2 le GND.
Bakeng sa ts'ebetso e latellanang ea OUT1 le OUT2 kenya jumper pakeng tsa IN1 le IN2 le jumper pakeng tsa li-terminals tsa GND ka bobeli.
Tlhokomeliso: StrikeIt1 e etselitsoe ho sebelisoa le lisebelisoa tsa VON DUPRIN® panic hardware.
VON DUPRIN® ke lets'oao la khoebo le ngolisitsoeng la Allegion.
Litlhokahalo tsa Wiring tse lekantsoeng ka Matla a NEC bakeng sa Mohlala oa StrikeIt1V:
Wiring ea potoloho e se nang matla le e se nang matla e tlameha ho lula e arohane ka khabinete. Lithapo tsohle tsa potoloho tse nang le matla a fokolang li tlameha ho lula bonyane 0.25 ″ hole le lithapo life kapa life tse se nang matla a fokolang. Ho feta moo, lithapo tsohle tse nang le matla a fokolang a motlakase le li-circuits tse se nang matla li tlameha ho kena le ho tsoa ka har'a khabinete ka likhoele tse fapaneng.
E 'ngoe ea mohlala o joaloampsena se bontšoa ka tlase. Sesebelisoa sa hau se ikhethileng se ka hloka hore ho sebelisoe li-conduit knockouts tse fapaneng. Ho ka sebelisoa likotopo life kapa life tsa conduit. Bakeng sa lisebelisoa tse fokolang matla, tšebeliso ea li-conduits ke boikhethelo. Likhokelo tsohle tsa methapo li tlameha ho etsoa ho sebelisa gauge e loketseng ea CM kapa FPL jacket terata (kapa e tšoanang le sebaka sa eona).
Hlokomela: Sheba setšoantšo sa ho tšoara mohala ka tlase bakeng sa mokhoa o nepahetseng oa ho kenya terata e koetsoeng ea CM kapa FPL (Setšoantšo sa 4a).
Tlhokomelo:
Yuniti e lokela ho lekoa bonyane hang ka selemo bakeng sa ts'ebetso e nepahetseng ka tsela e latelang:
Tlhokomelo ea FACP:
Ho etsa bonnete ba hore ho na le khokahanyo e nepahetseng le ts'ebetso ea "Fire Alarm" hokopiloeng, tlosa terata ho theminale e tšoailoeng [FACP] ho StrikeIt1V. Ha sesebelisoa sa DIP [SW4] se le maemong a ON, Lisebelisoa tsa Panic Hardware tse sa notleloang li tla notleloa. Ha sesebelisoa sa DIP [SW4] se le maemong a OFF (setšoantšo sa 3b, leqephe la 9), se notletsoeng Panic Hardware Devices se tla notlela hape.
Khumo Voltage Test: Tlas'a maemo a tloaelehileng a mojaro oa DC output voltage lokela ho hlahlojwa bakeng sa vol e nepahetsengtagboemo ba.
Teko ea Betri:
Tlas'a maemo a tloaelehileng a mojaro, hlahloba hore na betri e tjhajiloe ka botlalo, 'me u hlahlobe leqhubu le boletsoengtage ka bobeli boteng ba betri le botong bo tšoailoeng [+ BAT –] ho etsa bonnete ba hore ha ho na ho khaoha lithapong tsa ho hokela betri. Tobetsa konopo ea Manual test.
LED ea betri e lokela ho bonesoa nakong ea ho itlhahloba (hoo e ka bang metsotsoana e 15.
Ha betri ea LED e panya butle, sena se bontša hore betri e tlase kapa ha e eo, 'me ho ka 'na ha hlokahala hore e nkeloe e 'ngoe kapa e sebeletsoe.
Hlokomela: Nako e phahameng ea ho tjhaja ha e tsoa ke 650mA.
Hlokomela: Bophelo ba betri bo lebelletsoeng ke lilemo tse 5; leha ho le joalo ho khothaletsoa ho fetola libeteri ka lilemo tse 4 kapa ka tlase ha ho hlokahala.
Tlhokomeliso:
Bakeng sa tšireletso e tsoelang pele khahlanong le kotsi ea ho tsosoa ha motlakase le likotsi tsa mollo, tlosa fuse ea ho kenya sebaka ka mofuta o tšoanang le tekanyo: 6.3A/250V.
U se ke ua pepesa pula kapa mongobo; tšebeliso ea ka tlung feela.
Litekanyo kampetsoeng:
13.5" x 13" x 3.25" (342.9mm x 330.2mm x 82.6mm)
Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA
mohala: 718-567-8181
fekse: 718-567-9056
websebaka: www.altelengx.com
lengolo-tsoibila: info@altronix.com
Warranty ea bophelo bohle
Tataiso ea ho kenya StrikeIt1V
Litokomane / Lisebelisoa
 |
Altronix StrikeIt1V Panic Device Power Controller [pdf] Tlhophiso Tataiso StrikeIt1V, Panic Device Controller Power, StrikeIt1V Panic Device Power Controller |
 |
Altronix STRIKEIT1V Panic Sesebelisoa sa Matla a Matla [pdf] Tlhophiso Tataiso STRIKEIT1V, Panic Device Controller Power, STRIKEIT1V Panic Selaoli sa Matla a Sesebelisoa, Selaoli sa Matla a Sesebelisoa, Selaoli |
