Limojule tsa Katoloso ea Input-Output IO-DI8-RO4

IO-DI8-RO4, IO-DI8-RO4-L I/O Limojule tsa Katoloso
8 Litlhahiso, tse 4 tse hlahisoang

IO-DI8-RO4 le IO-DI8-RO4-L ke I/O
li-module tsa katoloso tse ka sebelisoang hammoho le balaoli ba khethehileng ba Unitronics OPLC.

Li-module li tšoana ntle le molumo oa tsonatage litlhaloso: IO-DI8-RO4 e matha ho 24 VDC; IO-DI8-RO4-L ho 12 VDC.
Li-module ka bobeli li fana ka lisebelisoa tse 8 tsa dijithale, mofuta oa pnp/npn (mohloli / sink), le liphetho tse 4 tsa relay.

Khokahano lipakeng tsa mojule le OPLC e fanoa ke adaptara.
Li-module tsena li ka phahamisoa holim'a seporo sa DIN, kapa tsa kengoa holim'a poleiti.

Boitsebiso ba karolo

1. Sehokelo sa mojule-ho-mojuleng
2. Letšoao la boemo ba puisano
3. Libaka tse hokelang phepelo ea motlakase li tsoa
4. Lintlha tsa khokahano ea sephetho
5. Matšoao a boemo ba ho kenya / ho tsoa
6. Sehokelo sa sehokelo sa mojule-to-module
7. Lintlha tsa khokahanyo

• Pele o sebelisa sehlahisoa sena, ke boikarabello ba mosebelisi ho bala le ho utloisisa tokomane ena le litokomane life kapa life tse tsamaeang le eona.
• Tsohle exampLits'oants'o tse bontšitsoeng mona li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho ipapisitsoe le li-examples.
• Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
• Ke basebeletsi ba nang le tsebo feela ba lokelang ho bula sesebelisoa sena kapa ho lokisa.

Litaelo tsa polokeho ea basebelisi le ts'ireletso ea lisebelisoa

Tokomane ena e reretsoe ho thusa basebetsi ba koetlisitsoeng le ba nang le bokhoni ho kenya thepa ena joalo ka ha ho hlalositsoe ke litaelo tsa Europe bakeng sa mechini, low vol.tage, le EMC. Ke setsebi kapa moenjiniere feela ea koetlisitsoeng ka maemo a motlakase a lehae le a naha a lokelang ho etsa mesebetsi e amanang le likhoele tsa motlakase tsa sesebelisoa.

Matšoao a sebelisoa ho totobatsa lintlha tse amanang le polokeho ea mosebelisi le ts'ireletso ea lisebelisoa ho pholletsa le tokomane ena. Ha matšoao ana a hlaha, boitsebiso bo amanang le bona bo tlameha ho baloa ka hloko le ho utloisisoa ka botlalo.

Letšoao	Tlhaloso	Tlhaloso
	Kotsi	Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa.
	Tlhokomediso	Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa.
Tlhokomeliso	Tlhokomeliso	E-ba hlokolosi.

Ho hloleha ho latela melaoana e nepahetseng ea polokeho ho ka baka kotsi e mpe ea motho kapa tšenyo ea thepa. Kamehla u be hlokolosi ha u sebetsa ka thepa ea motlakase.

■ Hlahloba lenaneo la mosebedisi pele o le tsamaisa.
■ Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng.
■ Kenya sekhechana sa potoloho sa kantle 'me u nke mehato e nepahetseng ea polokeho khahlano le khutsufatso ea terata ea kantle.
■ Ho qoba ho senya sistimi, se ke oa hokela / hakolla sesebelisoa ha motlakase o buletsoe.

Mehopolo ea Tikoloho

■ Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ho tsukutloa ha maikutlo khafetsa kapa ho thothomela ho feteletseng.

■ Tlohela bonyane sebaka sa 10mm bakeng sa moea pakeng tsa karolo e ka holimo le e ka tlase ea sesebelisoa le mabota a kampetsoeng.
■ Se ke oa beha ka metsing kapa ua lumella metsi hore a lutlele yuniti.
■ Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.

Ho kenya Module

Ho hloa seporo sa DIN
Hlakola sesebelisoa seporong sa DIN joalokaha ho bontšitsoe ka tlase; mojule o tla be o lutse hantle seporong sa DIN.

Screw-Mounting
Setšoantšo se leqepheng le latelang se huleloa ho sekaleng. E ka 'na ea sebelisoa e le tataiso bakeng sa ho kenya li-screw-mounting module. Mofuta oa screw o ntseng o eketseha: ebang ke M3 kapa NC6-32.

IO-DI8-RO4, IO-DI8-RO4-L I/O Limojule tsa Katoloso

IO-DI8-RO4, IO-DI8-RO4-L I/O Limojule tsa Katoloso

Ho hokahanya Li-module tsa Katoloso

Adapter e fana ka khokahano lipakeng tsa OPLC le mojule oa katoloso. Ho hokela mojule oa I/O ho adaptara kapa mojulung o mong:

1. Sututsa sehokelo sa module-to-module koung e ka lehlakoreng le letona la sesebelisoa.

Hlokomela hore ho na le cap e sireletsang e fanoeng ka adaptara. Sekoahelo sena se koahela boema-kepe ba mojule oa ho qetela oa I/O tsamaisong.

■ Ho qoba ho senya sistimi, o seke oa hokela kapa oa hakolla sesebelisoa ha motlakase o buletsoe.

Boitsebiso ba karolo

1 Sehokelo sa Module-to-module
2 Sekoaelo sa tšireletso

Wiring

■ Se ke oa tšoara lithapo tse phelang.

 

■ Lithakhisa tse sa sebelisoeng ha lia lokela ho hokelloa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
■ Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
■ Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.

Mekhoa ea ho Wiring

Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm 2–3.31 mm2) bakeng sa merero eohle ea likhoele.

1. Hlobola terata ho bolelele ba 7±0.5mm (0.250-0.300 inches).
2. Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
3. Kenya terata ka botlalo ka har'a theminale ho netefatsa hore ho ka etsoa khokahanyo e nepahetseng.
4. Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.

■ Ho qoba ho senya terata, u se ke ua feta torque e kholo ea 0.5 N·m (5 kgf·m).
■ Se ke oa sebelisa thini, solder, kapa ntho leha e le efe terateng e phasolohileng e ka etsang hore khoele ea terata e khaohe.
■ Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.

I/O Wiring—Kakaretso

■ Lithapo tse kenang kapa tse ntšang thepa ha lia lokela ho tsamaisoa ka thapo e tšoanang ea li-multi-core kapa ho arolelana terata e tšoanang.
■ Lumella voltagtšitiso ea ho theola le lerata le mehala ea ho kenya / ea tlhahiso e sebelisoang sebakeng se selelele. Sebelisa terata e boholo bo lekaneng bakeng sa mojaro.
■ Adapter, mats'oao a ho kenya, le phepelo ea motlakase e tsoang li tlameha ho hokeloa ho leqhubu le tšoanang la 0V.

Digital I/Os

■ Lintho tse kenang li ka kengoa ka mehala e le li-inpuoa tsa pnp (mohloli) kapa tsa npn (sink).

Ho Wiring The Output's Power Supply

Wiring DC phepelo
1. Hokela thapo ea "positive" ho "+V0"
terminal, le "negative" ho terminal ea "0V".
■ Motlakase o sa itšetleheng o ka sebelisoa ha feela lets'oao la 0V le hokahantsoe le chassis.
■ Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
■ Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.

Ho eketsa Nako ea Bophelo ba ho Kopana
Li-module ka bobeli li na le liphetho tse 4 tsa relay. Ho eketsa nako ea bophelo ba mabitso ana le ho sireletsa mojule ts'enyong e ka bang teng ka ho khutlisa EMF, hokela:
■ klamping diode e tsamaisanang le mojaro o mong le o mong oa inductive oa DC,
■ potoloho ea snubber ea RC e bapileng le mojaro o mong le o mong oa inductive oa AC.

IO-DI8-RO4, IO-DI8-RO4-L Litlhaloso tsa Tekniki

Max. tšebeliso ea hajoale ea 60mA ho tloha ho adaptara ea 5VDC Tšebeliso e tloaelehileng ea matla 0.15W @ 5VDC
Sesupo sa boemo
(RUN) LED e tala:
- E khantšitsoe ha khokahano ea puisano e thehoa lipakeng tsa module le OPLC.
—Ea panya ha lehokelo la puisano le hlōleha.

Lintho tse kenang
Palo ea likenyelletso 8 (sehlopheng se le seng)
Kenya mofuta oa pnp (mohloli) kapa npn (sink)
Galvanic ho itšehla thajana Ha ho Lipontšo tsa Boemo
(IN) Li-LED tse tala-Li khantšitse ha ho kenya letsoho ho sebetsa. Sheba Ntlha ea 1.
Nominal input voltage 24VDC bakeng sa IO-DI8-RO4, 12VDC bakeng sa IO-DI8-RO4-L
Keletso voltage pnp (mohloli)
npn (sink), voltage/current Input current
Nako ea ho arabela 10mSec e tloaelehileng
Kenyelletso #7 Litlhaloso tse ka tlase li sebetsa ha kenyo ena e kentsoe ka mehala hore e sebelisoe joalo ka sebali sa lebelo le holimo sa counter input/frequency measure. Sheba Lintlha 2 le 3.
Qeto ea 16-bit
Maqhubu a 5kHz boholo
Bophahamo bo fokolang ba sekhahla ke 80μs
6 Unitroniki
IO-DI8-RO4, IO-DI8-RO4-L Litlhaloso tsa Tekniki
C
R
0V
N
IO-DI8-RO4
IO-DI8-RO4-L
0-5VDC bakeng sa Logic '0'
17-28.8VDC bakeng sa Logic '1'
0-3VDC bakeng sa Logic '0'
8-15.6V bakeng sa Logic '1'
17-28.8VDC/<1.1 mA bakeng sa Logic '0' 0-5VDC/>4.3mA bakeng sa Logic '1'
8-15.6VDC/<1.1 mA bakeng sa Logic '0' 0-3VDC/>4.3mA bakeng sa Logic '1'
6mA @ 24VDC
6mA @ 12VDC

Litholoana
Palo ea liphetho 4 relay
Sephetho mofuta SPST-NO relay; 230VAC / 24VDC Mofuta oa relay
IO-DI8-RO4 Takamisawa JY-24H-K kapa NAIS (Matsushita) JQ1AP-24V kapa OMRON G6B-1114P-24VDC
IO-DI8-RO4-L Takamisawa JY-12H-K kapa NAIS (Matsushita) JQ1AP-12V kapa OMRON G6B-1114P-12VDC
Ho itšehla thajana Ka ho fetisetsoa
Lipontšo tsa Boemo
(OUT) Li-LED tse khubelu - Ho khantša ha tlhahiso e tsamaisanang e sebetsa.
Sephetho sa hajoale 5A boholo (moroalo o hanyetsanang) 1A boholo (moroalo o matla)
Boholo ba maqhubu a 10Hz
Tšireletso ea ho ikopanya le Mehato ea ka ntle e hlokahalang (sheba ka holimo: Ho Eketsa Nako ea Bophelo ba ho Kopana) Motlakase oa Outputs IO-DI8-RO4 IO-DI8-RO4-L
Voltage Ho sebetsa voltage
Boholo ba tšebeliso ea hona joale
Tikoloho IP20 / NEMA1
Mocheso o sebetsang 0 ho 50C (32 ho 122F) Mocheso oa polokelo -20 ho 60 C (-4 ho 140F) Mongobo o Batlang (RH) 5% ho 95% (o sa fokotseheng)
Litekanyo (WxHxD) 80mm x 93mm x 60mm (3.15" x 3.66" x 2.362") Boima ba 'mele 164g (5.8oz.)
Ho hloella holim'a seporo sa 35mm DIN kapa se kentsoeng ka screw.

Lintlha:
1. Li-inputs' LEDs li khantša feela ha khokahanyo ea puisano e thehiloe lipakeng tsa module le OPLC.
2. Input #7 e ka sebetsa joalo ka k'haontareng ea lebelo le holimo, mochini o lekanyang maqhubu, kapa joalo ka mokhoa o tloaelehileng oa ho kenya. Ha Input #7 e sebelisoa e le mokhoa o tloaelehileng oa ho kenya, ho sebetsa lintlha tse tloaelehileng tsa ho kenya.
3. Kenyelletso #6 e ka sebetsa joalo ka ha khaontareng e seta bocha, kapa joalo ka mokhoa o tloaelehileng oa dijithale; maemong afe kapa afe, litlhaloso tsa eona ke tsa mokhoa o tloaelehileng oa ho kenya dijithale.

UL Compliance

Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
Mehlala e latelang: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X li thathamisitsoe ke UL bakeng sa Libaka tse Kotsi.
Mehlala e latelang: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-L, IO DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 li thathamisitsoe ke UL bakeng sa Sebaka se Tloaelehileng.

Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.

• Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse seng kotsi feela.
• Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
• TLHOKOMELISO—Kotsi ea Ho phatloha—ho fapanyetsana ha likarolo ho ka ’na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
• TLHOKOMELISO - KOTSI EA HO PHAHLOA - Se ke oa hokela kapa ua hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
• TLHOKOMELISO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
• Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.

Relay Output Resistance Ratings

Lihlahisoa tse thathamisitsoeng ka tlase li na le liphetho tsa relay:
Li-module tsa katoloso ea Input/Output, Mehlala: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L

• Ha lihlahisoa tsena tse khethehileng li sebelisoa libakeng tse kotsi, li lekantsoe ho 3A res, ha lihlahisoa tsena tse khethehileng li sebelisoa maemong a se nang kotsi a tikoloho, li lekantsoe ho 5A res, joalokaha ho fanoe ka litlhaloso tsa sehlahisoa.

Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka boikhethelo ba eona, ntle le tsebiso, ea ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le ho hula ka ho sa feleng kapa ka nakoana. tse furallang mmarakeng.
Lintlha tsohle tse tokomaneng ena li fanoe ka "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso leha e le life tse boleloang tsa thekiso, ho sebetsa ka morero o itseng, kapa ho se tlōle molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e tla ba le boikarabello bakeng sa litšenyehelo tse khethehileng, tse sa lebelloang, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa e amanang le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena.
Mabitso a kgwebo, matshwao a kgwebo, matshwao a kgwebo, matshwao a ditshebeletso a hlahisitsweng tokomaneng ena, ho kenyeletswa le moetso wa ona, ke thepa ya Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro mme ha o a dumellwa ho di sebedisa ntle le tumello e ngotsweng pele. tsa Unitronics kapa motho e mong ea ka bang mong'a tsona.

Litokomane / Lisebelisoa

unitronics IO-DI8-RO4 Input-Output Expansion Modules [pdf] Buka ea Taelo IO-DI8-RO4 Input-Output Expansion Modules, IO-DI8-RO4, Input-Output Memodules, Output Extensions modules, Katoloso ea Mojule.

Litšupiso

• Bukana ea Mosebelisi