IO-DI8-RO4 Abubuwan Faɗawa Abubuwan Shigar-Fitarwa

IO-DI8-RO4, IO-DI8-RO4-L I/O Fadada Modules
8 abubuwan shigarwa, 4 abubuwan fitarwa

IO-DI8-RO4 da IO-DI8-RO4-L sune I / O
kayan haɓakawa waɗanda za a iya amfani da su tare da takamaiman masu kula da Unitronics OPLC.

Modulolin iri ɗaya ne sai ga voltage ƙayyadaddun bayanai: IO-DI8-RO4 yana gudana a 24 VDC; IO-DI8-RO4-L a 12 VDC.
Duk samfuran biyu suna ba da bayanai na dijital guda 8, nau'in pnp/npn (tushen/sink), da abubuwan da aka fitar 4.

Ana samar da hanyar sadarwa tsakanin module da OPLC ta hanyar adaftar.
Ana iya ɗauka waɗannan samfuran a kan dogo na DIN, ko kuma a ɗaure su a kan faranti mai hawa.

Gane bangaren

1. Module-zuwa-module mai haɗawa
2. Alamar halin sadarwa
3. Wuraren haɗin wutar lantarki na abubuwan fitarwa
4. Abubuwan haɗin da aka fitar
5. Matsayin shigarwa/fitarwa
6. Module-zuwa-module mai haɗa tashar jiragen ruwa
7. Abubuwan haɗin shigarwa

• Kafin amfani da wannan samfur, alhakin mai amfani ne ya karanta da fahimtar wannan daftarin aiki da duk wani takaddun da ke biye.
• Duk examples da zane-zane da aka nuna a nan an yi su ne don taimakawa fahimta, kuma ba su da garantin aiki. Unitronics ba ya karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
• Da fatan za a zubar da wannan samfurin daidai da ƙa'idodi da ƙa'idodi na gida da na ƙasa.
• ƙwararrun ma'aikatan sabis ne kawai ya kamata su buɗe wannan na'urar ko su yi gyara.

Tsaron mai amfani da jagororin kariyar kayan aiki

Wannan takarda an yi niyya ne don taimaka wa ƙwararrun ƙwararrun ma'aikata a cikin shigar da wannan kayan aikin kamar yadda umarnin Turai na injiniyoyi suka ayyana, low vol.tage, da EMC. Mai fasaha ko injiniya ne kawai wanda ya horar da ma'aunin lantarki na gida da na ƙasa ya kamata ya yi ayyukan da ke da alaƙa da na'urar lantarki.

Ana amfani da alamomin don haskaka bayanan da suka shafi amincin mai amfani da kariyar kayan aiki a cikin wannan takaddar. Lokacin da waɗannan alamomin suka bayyana, dole ne a karanta bayanan haɗin gwiwa a hankali kuma a fahimce su sosai.

Alama	Ma'ana	Bayani
	hadari	Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya.
	Gargadi	Hatsarin da aka gano na iya haifar da lalacewar jiki da ta dukiya.
Tsanaki	Tsanaki	Yi amfani da hankali.

Rashin bin ƙa'idodin aminci masu dacewa na iya haifar da mummunan rauni na mutum ko lalacewar dukiya. Koyaushe yi taka tsantsan yayin aiki da kayan lantarki.

n Duba shirin mai amfani kafin gudanar da shi.
■ Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan da aka halatta.
∎ Shigar da na'urar da'ira ta waje kuma ɗauki matakan tsaro da suka dace game da gajeriyar kewayawa a cikin wayoyi na waje.
n Don guje wa lalata tsarin, kar a haɗa / cire haɗin na'urar lokacin da wuta ke kunne.

La'akarin Muhalli

∎ Kar a sanyawa a wuraren da: ƙura mai wuce gona da iri, gurɓataccen iskar gas ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, firgita na yau da kullun ko firgita.

n Bar mafi ƙarancin sarari na mm 10 don samun iska tsakanin saman sama da ƙasa na na'urar da bangon shinge.
■ Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
■ Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.

Hawan Module

DIN-dogo hawa
Dauke na'urar a kan layin dogo na DIN kamar yadda aka nuna a ƙasa; Module ɗin zai kasance daidai a kan layin dogo na DIN.

Screw-Mounting
An zana adadi a shafi na gaba zuwa ma'auni. Ana iya amfani da shi azaman jagora don dunƙule-hawan module. Nau'in hawa dunƙule: ko dai M3 ko NC6-32.

IO-DI8-RO4, IO-DI8-RO4-L I/O Fadada Modules

IO-DI8-RO4, IO-DI8-RO4-L I/O Fadada Modules

Haɗa Modulolin Faɗawa

Adafta yana ba da haɗin kai tsakanin OPLC da tsarin haɓakawa. Don haɗa tsarin I/O zuwa adaftar ko zuwa wani tsarin:

1. Tura mai haɗa module-zuwa-module cikin tashar tashar da ke gefen dama na na'urar.

Lura cewa akwai hular kariya da aka tanada tare da adaftan. Wannan hular tana rufe tashar tashar I/O module ta ƙarshe a cikin tsarin.

n Don guje wa lalata tsarin, kar a haɗa ko cire haɗin na'urar lokacin da wuta ke kunne.

Gane bangaren

1 Module-zuwa-module mai haɗawa
2 Hular kariya

Waya

■ Kar a taɓa wayoyi masu rai.

 

■ Kada a haɗa fil ɗin da ba a yi amfani da shi ba. Yin watsi da wannan umarnin na iya lalata na'urar.
∎ Kar a haɗa siginar 'Neutral ko' Layi' na 110/220VAC zuwa fil ɗin 0V na na'urar.
■ Bincika duk wayoyi biyu kafin kunna wutar lantarki.

Hanyoyin Waya

Yi amfani da crimp tashoshi don wayoyi; yi amfani da 26-12 AWG waya (0.13 mm 2-3.31 mm2) don duk dalilai na wayoyi.

1. Cire waya zuwa tsayin 7± 0.5mm (0.250-0.300 inci).
2. Cire tashar zuwa mafi girman matsayi kafin saka waya.
3. Saka waya gaba daya a cikin tashar don tabbatar da cewa za a iya yin haɗin da ya dace.
4. Maƙarƙashiya don kiyaye waya daga ja kyauta.

∎ Don guje wa ɓata wayan, kar a wuce iyakar iyakar 0.5 N·m (5 kgf·m).
∎ Kar a yi amfani da gwangwani, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
∎ Shigar da matsakaicin nisa daga babban volttage igiyoyi da kayan wuta.

I/O Wiring — Gabaɗaya

∎ Kada a yi amfani da igiyoyin shigarwa ko fitarwa ta hanyar kebul mai mahimmanci iri ɗaya ko raba waya iri ɗaya.
■ Bada izinin voltage sauke da tsangwama amo tare da shigarwa/fitarwa layukan da aka yi amfani da su ta tsawon nisa. Yi amfani da waya wanda yayi daidai da girman nauyin kaya.
∎ Adaftar, siginar shigarwa, da samar da wutar lantarki dole ne a haɗa su da siginar 0V iri ɗaya.

Digital I/Os

Ana iya haɗa abubuwan da aka shigar a matsayin ko dai pnp (source) ko npn (sink).

Wayar da Wutar Lantarki ta Fitarwa

Wiring DC wadata
1. Haɗa kebul na "tabbatacce" zuwa "+V0"
m, da kuma "mara kyau" zuwa "0V" m.
∎ Za a iya amfani da wutar lantarki mara ware muddin an haɗa siginar 0V zuwa chassis.
∎ Kar a haɗa siginar 'Neutral ko' Layi' na 110/220VAC zuwa fil ɗin 0V na na'urar.
■ A yayin da voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.

Ƙara Tsawon Rayuwar Sadarwa
Dukansu na'urorin suna da abubuwan fitarwa guda 4. Don ƙara tsawon rayuwar waɗannan lambobin sadarwa da kare tsarin daga yuwuwar lalacewa ta hanyar juyawa EMF, haɗa:
■ da clamping diode a layi daya tare da kowane inductive DC load,
n da'irar RC snubber a layi daya tare da kowane nau'in AC mai kunnawa.

IO-DI8-RO4, IO-DI8-RO4-L Ƙididdiga na Fasaha

Max. Matsakaicin yawan amfanin yanzu 60mA daga adaftar 5VDC Yawan amfani da wutar lantarki 0.15W @ 5VDC
Alamar matsayi
(RUN) Koren LED:
-Lit lokacin da aka kafa hanyar sadarwa tsakanin module da OPLC.
-Kyafta ido lokacin da hanyar sadarwar ta gaza.

Abubuwan shigarwa
Adadin abubuwan shigarwa 8 (a cikin rukuni ɗaya)
Nau'in shigar pnp (source) ko npn (sink)
Warewar Galvanic Babu Alamun Matsayi
(IN) Ledojin koren LED-littattafai lokacin shigar da madaidaicin ke aiki. Duba bayanin kula 1.
Matsayin shigar ƙuri'atage 24VDC don IO-DI8-RO4, 12VDC don IO-DI8-RO4-L
Shigar da kunditage pnp (source)
npn (sink), voltage/Input na yanzu
Lokacin amsawa 10mSec na hali
Shigar da #7 Abubuwan da ke ƙasa suna aiki lokacin da aka naɗa wannan shigarwar don amfani azaman shigarwar ƙira mai sauri/ma'auni. Duba Bayanan kula 2 da 3.
Ƙaddamarwa 16-bit
Matsakaicin matsakaicin 5kHz
Mafi ƙarancin bugun bugun jini 80μs
6 Unitronics
IO-DI8-RO4, IO-DI8-RO4-L Ƙididdiga na Fasaha
C
R
0V
N
IO-DI8-RO4
IO-DI8-RO4-L
0-5VDC don Logic '0'
17-28.8VDC don Logic '1'
0-3VDC don Logic '0'
8-15.6V don Logic '1'
17-28.8VDC/<1.1 mA don Logic '0' 0-5VDC/> 4.3mA don Logic '1'
8-15.6VDC/<1.1 mA don Logic '0' 0-3VDC/> 4.3mA don Logic '1'
6mA @ 24VDC
6mA @ 12VDC

Abubuwan da aka fitar
Adadin abubuwan da aka fitar 4 relay
Nau'in fitarwa na SPST-NO relay; 230VAC/24VDC Nau'in gudun ba da sanda
IO-DI8-RO4 Takamisawa JY-24H-K ko NAIS (Matsushita) JQ1AP-24V ko OMRON G6B-1114P-24VDC
IO-DI8-RO4-L Takamisawa JY-12H-K ko NAIS (Matsushita) JQ1AP-12V ko OMRON G6B-1114P-12VDC
Warewa Ta hanyar Relay
Alamun Matsayi
(FITA) Jajayen ledoji- Yana kunna lokacin da abin da ya dace ke aiki.
Fitar da matsakaicin 5A na yanzu (nauyin juriya) 1A matsakaicin (nauyin inductive)
Matsakaicin mitar 10Hz
Kariyar tuntuɓar kariya ta waje da ake buƙata (duba sama: Ƙara Tsawon Rayuwar Tuntuɓi) Samar da wutar lantarki IO-DI8-RO4 IO-DI8-RO4-L
Sunan aiki voltage aiki voltage
Matsakaicin amfani na yanzu
Muhalli IP20 / NEMA1
Zazzabi na aiki 0
Girma (WxHxD) 80mm x 93mm x 60mm (3.15" x 3.66" x 2.362") Nauyi 164g (5.8oz.)
Hawan ko dai akan dogo na DIN 35mm ko mai dunƙulewa.

Bayanan kula:
1. LEDs na abubuwan shigar suna haskakawa kawai lokacin da aka kafa hanyar haɗin sadarwa tsakanin module da OPLC.
2. Input #7 na iya aiki ko dai azaman babban ma'aunin ƙira, ma'aunin mita, ko azaman shigarwar dijital ta al'ada. Lokacin da ake amfani da Input #7 azaman shigarwar dijital ta al'ada, ana amfani da ƙayyadaddun shigarwa na yau da kullun.
3. Input #6 na iya aiki ko dai azaman sake saitin counter, ko azaman shigarwar dijital ta al'ada; a kowane hali, ƙayyadaddun sa sune na shigarwar dijital ta al'ada.

Farashin UL

Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
Samfura masu zuwa: IO-AI4-AO2, IO-AO6X, IO-ATC8, IO-DI16, IO-DI16-L, IO-DI8-RO4, IO-DI8-RO4-L, IO-DI8-TO8, IO- DI8-TO8-L, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X an jera UL don wurare masu haɗari.
Samfura masu zuwa: EX-D16A3-RO8, EX-D16A3-RO8L, EX-D16A3-TO16, EX-D16A3-TO16L, IO-AI1X-AO3X, IO-AI4-AO2, IO-AI4-AO2-B, IO- AI8, IO-AI8Y, IO-AO6X, IO-ATC8, IO-D16A3-RO16, IO-D16A3-RO16L, IO-D16A3-TO16, IO-D16A3-TO16L, IO-DI16, IO-DI16-LI, IO- DI8-RO4, IO-DI8-RO4-L, IO-DI8-RO8, IO-DI8-RO8-L, IO-DI8-TO8, IO-DI8-TO8-L, IO-DI8ACH, IO-LC1, IO- LC3, IO-PT4, IO-PT400, IO-PT4K, IO-RO16, IO-RO16-L, IO-RO8, IO-RO8L, IO-TO16, EX-A2X, EX-RC1 sune UL da aka jera don Wuri na Musamman.

Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.

• Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wuraren da ba masu haɗari kawai.
• Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
• GARGAƊI—Haɗarin Fashe—Masanin abubuwan da ke tattare da shi na iya ɓata dacewa ga Class I, Division 2.
• GARGAƊI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
• GARGAƊI – Fitarwa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
• Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.

Ƙimar Juriya na Relay

Samfuran da aka jera a ƙasa sun ƙunshi abubuwan da aka fitar:
Abubuwan haɓaka shigarwa / fitarwa, Samfura: IO-DI8-RO4, IO-DI8-RO4-L, IO-RO8, IO-RO8L

• Lokacin da aka yi amfani da waɗannan takamaiman samfuran a wurare masu haɗari, ana ƙididdige su a 3A res, lokacin da ake amfani da waɗannan takamaiman samfuran a cikin yanayin muhalli marasa haɗari, ana ƙididdige su a 5A res, kamar yadda aka bayar a cikin ƙayyadaddun samfurin.

Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, bisa ga ra'ayin sa, kuma ba tare da sanarwa ba, don dakatarwa ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuransa, da kuma ko dai na dindindin ko na ɗan lokaci janye kowane daga cikinsu. da forgoing daga kasuwa.
Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin.
Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izini na farko ba. na Unitronics ko wani ɓangare na uku wanda zai iya mallake su.

Takardu / Albarkatu

unitronics IO-DI8-RO4 Input-Fitarwa Expansion Modules [pdf] Jagoran Jagora IO-DI8-RO4 Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaddamarwa na Ƙaddamarwa .

Magana

• Manual mai amfani