SloanLED RC-100 Sensor Remote Programmer

TS'EBETSO LITAELO

LIEKETSENG TS'OANELO

Phepelo ea motlakase	2 x AAA 1 5V betri, Alkaline e khethoa
Ho jara mokotla	RC-100 ka mokotlaneng oa thepa
Sebaka sa ho kenya	Ho fihla ho 15 m (50 ft.)
Op. mocheso	0°C- 50°C (32°F- 122°F)
Litekanyo	123x70x20.3 mm (4. 84″ x2.76″ x0. 8″)

TLHOKOMELISO: Tlosa libeteri sebakeng haeba remote e ke ke ea sebelisoa ka mor'a matsatsi a 30.

FEELAVIEW

Sesebelisoa sa Remoutu sa Wireless IR Configuration Tool ke sesebelisoa se ts'oaroang ka letsoho bakeng sa tlhophiso e hole ea li-sensor tse kentsoeng ke IA. Sesebelisoa se nolofalletsa sesebelisoa ho fetola ka pushbutton ntle le litepisi kapa lisebelisoa, 'me se boloka mekhoa e meng ea li-sensor tse 'ne ho potlakisa tlhophiso ea li-sensor tse ngata.
Taolo ea hole e romella setlhophiso sa sensor ka bophahamo bo holimo ho fihla ho maoto a 50. Sesebelisoa se ka bonts'a liparamente tsa sensor tse neng li thehiloe pele, li kopitsa liparamente le ho romella liparamente tse ncha kapa ho boloka paramethara ea profiles. Bakeng sa merero moo litlhophiso tse tšoanang li ka batloang ho pholletsa le palo e kholo ea libaka kapa libaka, bokhoni bona bo fana ka mokhoa o hlophisitsoeng oa tlhophiso. Litlhophiso li ka kopitsoa sebakeng sa marang-rang, kapa libakeng tse fapaneng.

LIEKETSENG LELED

LED	TLHALOSO	LED	TLHALOSO
KHANYA	Mosebetsi o phahameng oa ho fetola trim (Ho Beha boemo ba mabone a hokahaneng nakong ea ho lula)		Ho khetha boleng ba hajoale bo potileng joalo ka moeli oa letsatsi. Karolo ena e thusa sesebelisoa hore se sebetse hantle maemong afe kapa afe a 'nete a kopo.
TSIETSO	Ho beha kutlo ea kutlo ea ho lula ha kutlo		Sensor ea khanya ea motšehare e emisa ho sebetsa, 'me motsamao o mong le o mong o bonoang o ka bonesa sesebelisoa sa mabone, ho sa tsotelehe hore na leseli la tlhaho le khanya hakae.
PUSELETSO NAKO	Nako eo Sensor e tla tima (haeba u khetha boemo ba ho ema ke 0) kapa fokotsa khanya ho ea boemong bo tlaase ka mor'a hore sebaka se tlosoe	EMELANG DIM	Ho beha boemo ba tlhahiso ea mabone a hokahaneng nakong ea sekheo. Sensor e tla laola tlhahiso ea mabone boemong bo behiloeng. Ho beha boemo ba STAND-BY DIM ho 0 ho bolela hore khanya e timme nakong ea mosebetsi.
TŠEBELETSO MOTS'EANE	Ho emela maemo a fapaneng a khanya ea tlhaho bakeng sa Sensor.	EMELANG NAKO	Ho emela nako eo Sensor e tla boloka lebone le le boemong bo lefifi bo tlase kamora hore HOLD NAKO e fete.

MOSEBETSI OA LETLOTLO

KONYANE	TLHALOSO	KONYANE	TLHALOSO
	Tobetsa konopo, lebone le ea mocheng oa ho tima kapa oa ho tima ka ho sa feleng, 'me sensor ea holofala. (O TLAMEHA ho tobetsa @ konopo ho tlohela mokhoa ona bakeng sa Setting.		Tobetsa konopo ea 8, sensor e qala ho sebetsa 'me litlhophiso tsohle li lula li tšoana le boemo ba morao-rao pele lebone le tima / le tima.
	Hlahisa li-parameter tsa hajoale / tsa morao-rao ho matšoao a LED (lipontšo tsa LED li tla sebetsa bakeng sa ho bonts'a litlhophiso tsa maemo).		Konopo ke ea ho leka kutloisiso ea sepheo feela. Ka mor'a hore u khethe litebello tsa kutlo, ebe u tobetsa konopo, Sensor e ea tekong (nako ea ho tšoara ke 2s feela) ka bo eona, ha nako e ntse e le nako le sensor ea motšehare e holofetse. Tobetsa @ konopo ho tlohela mokhoa ona.
	Tobetsa @ konopo, litlhophiso tsohle li khutlela ho li-setting tsa dip switch in sensor.
	Kena ka boemo ba ho seta, li-parameter tsa li-remote control li tla khantša ho khethoa. 'me u tsamaee ho ea UP le Down ho khetha li-parameter tse khethiloeng ho matšoao a LED.		Tsamaea ho ea LEFT le HO HODELA ho khetha li-parameter tse khethiloeng ho matšoao a LED.
	Netefatsa li-parameter tse khethiloeng ho li-remote control.		Bula le ho koala Sensor e bohlale ea motšehare. Tobetsa @ kapa (!) Kena boemong ba ho seta, li-parameter tsa li-remote control li tla khantša ho khethoa, Tobetsa @ bakeng sa Sensor e bulehileng kapa e koaletsoeng ea khanya ea motšehare.
	Tobetsa konopo ea @, kenya liparamente tsa hajoale ho sensor(s), lebone le etelletsoeng pele leo sensor likhokahano li tla bulela/tima joalo ka ha netefatso.
	4 Mekhoa e nang le li-parameter tse seng li setiloe tse fumanehang hore li ka fetoloa le ho bolokoa ka mekhoa.

TSEBISO

The SETTING Content e na le litlhophiso tsohle tse fumanehang le li-parameter bakeng sa li-sensor tse hole. E u lumella ho fetola taolo e fumanehang, li-parameter, le ts'ebetso ea sensor ho tloha fekthering ea kamehla kapa ea hajoale. Fetola li-setting tse ngata tsa sensor (s)

1. Tobetsa§ konopo, li-leds tsa remote control li tla bonts'a liparamente tsa morao-rao tseo u li behileng.
2. Tobetsa@or® kenya boemong ba ho seta, paramethara ea taolo ea remote e tla benya hore e khethoe, e ea sebakeng seo u se batlang ka ho tobetsa@®@® ho khetha li-parameter tse ncha.
3. Tobetsa "OK" ho netefatsa litlhophiso tsohle le ho boloka.
4. Ikemisetse ho sensor e shebiloeng ebe u tobetsa ho kenya paramente e ncha, lebone le etelletsoeng pele leo sensor e le hokelang le tla tima / tima joalo ka ha ho netefatsoa.

• ELA HLOKO: Setting e sebetsa mohato oa bohlokoa ke Push @or ®, kenya boemo ba ho seta.
• TLHOKOMELISO: Lebone le etelletsoeng pele leo sensor e hokelang ho lona le tla benya / tima ho netefatsa ho amohela liparamente tse ncha
• TLHOKOMELISO: Haeba o tobetsa konopo ea§, li-indicator tse lebisitsoeng hole li tla bonts'a li-parameter tsa morao-rao tse rometsoeng.

Fetola li-setting tse ngata tsa li-sensor tse nang le sensor e bohlale ea photocell Open

1. Tobetsa S, matšoao a hole a etelletsoeng pele a tla bonts'a li-parameter tsa morao-rao.
2. Tobetsa kapa kenya boemong ba ho seta, parameter Led indicators of remote control li tla khantša ho khethoa.
3. Tobetsa 2 li-led indicators li tla benya ka har'a li-sensor tsa mots'eare, khetha mots'eare e le sebaka sa ho bonesa Ka ho iketsa, khetha mots'eare e le setpoint ho tima Ka ho iketsa.
4. Tobetsa ho netefatsa di-setting tsohle le ho boloka.
5. Ikemisetse ho sensor e shebiloeng ebe u tobetsa ho kenya paramente e ncha. Lebone le etelletsoeng pele leo sensor e le hokelang le tla tima / le tima.

HLOKOMELA:  e emisitsoe ka ho sa feleng.

1. Bula kapa u koale sensor e bohlale ea motšehare ka ho sututsa ha remote control e le boemong ba maemo.
2.  Ha sensor e bohlale ea motšehare e buloa, matšoao a 2 a Led a khanya sebakeng sa sensor ea motšehare. khetha mots'eare oa G joalo ka setpoint ho bonesa ka Automatically , khetha mots'eare e le setpoint ho tima ka tsela e iketsang.Ha smartlight daylight sensor close, 1 Led indicator ke flash in the daylight sensor setting for choose motsheare sensor threshold.
3. Ha sensor e bohlale ea motšehare e buloa, nako ea ho ema ke 8 feela
4.  Sensor e bohlale ea motšehare e nka sebaka sa senor se tloaelehileng sa photocell mme e sebetsa ka boikemelo.
5.  Sheba Mosebetsi oa Sensor ea Motšehare.

Mosebetsi oa Corridor

Ts'ebetso ena ka har'a sensor ea motsamao ho fihlela taolo ea maemo a mararo. bakeng sa libaka tse ling tse hlokang tsebiso ea phetoho ea lebone pele ho tima. Sensor e fana ka maemo a 3 a khanya: 100% -> leseli le lefifi (leseli la tlhaho ha lea lekana) -> tima; le linako tse 2 tsa nako ea ho leta e khethiloeng: nako ea ho ts'oara le nako ea ho ema; Sebaka se ikhethileng sa khanya ea letsatsi le sebaka sa bolokolohi ba ho lemoha.

Mosebetsi oa Mots'eare oa Sensor

Bula sensor ea khanya ea letsatsi ka push@ha remote control e le maemong a teng.

Mosebetsi oa Corridor VS Mots'ehare oa Sensor.

1. ln corridor function, bonesa lebone LE TLAMEHA ka boemo ba khanya ea tlhaho bo tlase ba sensor ea motšehare le Occupancy. Ka ts'ebetso e bohlale ea sensara ea mots'eare, bonesa lebone ka boemo bo tlase ba khanya ea motšehare hore le bonese le haeba ho se na sekheo.
2. ln corridor function, tima lebone ka nako ea ho ema ha ho se na sekheo. Ka ts'ebetso e bohlale ea sensor ea motšehare, tima lebone ka boemo ba khanya ea tlhaho bo phahameng ho feta sets'oants'o sa mots'eare ho tima leha o le teng.
3. ln ts'ebetso e bohlale ea sensor ea mots'eare, boemo ba leseli la tlhaho bo bobebe / bo tlase ho feta sebaka sa motšehare ho tima / ho bulela TŠOANTŠE ho boloka bonyane motsotso o le mong, o tla tima/ho bonesa lebone ka bohona.

Mabapi le RESET le MODE(1,2,3,4)
Remoutu control e tla le 4 Scene MODES tseo e seng tsa kamehla. U ka etsa li-parameter tse lakatsehang 'me ua li boloka e le MODE e ncha (1,2,3,4) ho hlophisa li-sensor tse kentsoeng.
SETA HAPE: litlhophiso tsohle li khutlela ho li-setting tsa DIP Switch in sensor.
MEKHOA YA SENESE(1 2 3 4)

Kopo	Khetho ea Sebaka	Khanya	Sebaka sa Boemo	Tšoara Nako	Nako ea ho ema	Boemo ba Dim ba Emeng	Sensor ea Motšehare
Ka hare	Mokhoa oa 1	100.	75%	5min	30min	30%	@
Ka hare	Mokhoa2	100%	75%	1min	+ ooo	30%	@
Ka hare	Mokhoa3	100.	75%	5min	30min	30%	30LUX
Kantle	Mokhoa4	100%	75%	1min	+ ooo	30%	@(30LUX/300LUX)

Fetola MODES:

1.  tobetsa@ !@!@!@ konopo,Led controls ea remote e bonts'a liparamente tse teng.
2. tobetsa @(!)@(B ho khetha liparamente tse ncha.
3. Tobetsa (§)ho netefatsa liparamente tsohle le ho boloka ka mokhoa.

HLOKOMELA

Mosebetsi oa ho kenya o u lumella ho lokisa sensor ka liparamente tsohle ts'ebetsong e le 'ngoe. U ka khetha CURRENT SETTING parameters kapa MODE bakeng sa ho kenya. Litlhophiso tsa hajoale kapa MODE li hlahisoa ho Remote control. Kenya liparamente tsa hajoale ho sensor (li-sensor), 'me u phete liparamente tsa sensor ho tse ling

1. Tobetsa konopo kapa tobetsa liparamente tsohle li hlahisoa ho Remote control.
   • Hlokomela: hlahloba hore na li-parameter kaofela li nepahetse, haeba ho se joalo, li fetole.
2.  Ikemisetse ho sensor ebe o tobetsa konopo ea§ , lebone leo sensor e le hokelang le tla be le butswe/ho tima joalo ka ha ho tiisa.
   • Hlokomela: Haeba sensor e 'ngoe e hloka li-parameter tse tšoanang, sheba feela sensor ebe o tobetsa konopo.

Litokomane / Lisebelisoa

SloanLED RC-100 Sensor Remote Programmer [pdf] Buka ea Taelo RC-100, Sensor Remote Programmer

Litšupiso

• Bukana ea Mosebelisi