SALSIFY RC-100 Sensor Remote Programmer Bukana ea Taelo

LIEKETSENG TS'OANELO

Phepelo ea motlakase	2 x AAA 1.5V betri, Alkaline e khethoa
Ho jara mokotla	RC-100 ka mokotlaneng oa thepa
Sebaka sa ho kenya	Ho fihla ho 15 m (50 ft.)
Op. mocheso	0°C~50°C (32°F~122°F)
Litekanyo	123 x 70 x 20.3 mm (4.84″ x 2.76″ x 0.8″)

TLHOKOMELO
Tlosa libeteri sebakeng haeba remote e ke ke ea sebelisoa ka mor'a matsatsi a 30.

FEELAVIEW

Sesebelisoa sa Remoutu sa Wireless IR Configuration Tool ke sesebelisoa se ts'oaroang ka letsoho bakeng sa tlhophiso e hole ea li-sensor tse kentsoeng ke IR. Sesebelisoa se nolofalletsa sesebelisoa ho fetola ka pushbutton ntle le litepisi kapa lisebelisoa, 'me se boloka mekhoa e meng ea li-sensor tse 'ne ho potlakisa tlhophiso ea li-sensor tse ngata.
Taolo e hole e sebelisa puisano ea IR ea bidirectional ho romella le ho amohela li-setting tsa sensor ka bophahamo bo holimo ho fihla ho maoto a 50. Sesebelisoa se ka bonts'a liparamente tsa sensor tse neng li thehiloe pele, li kopitsa liparamente le ho romella liparamente tse ncha kapa ho boloka paramethara ea profiles. Bakeng sa merero moo litlhophiso tse tšoanang li ka batloang ho pholletsa le palo e kholo ea libaka kapa libaka, bokhoni bona bo fana ka mokhoa o hlophisitsoeng oa tlhophiso. Litlhophiso li ka kopitsoa sebakeng sa marang-rang, kapa libakeng tse fapaneng.

LIEKETSENG LELED

LED	TLHALOSO	LED	TLHALOSO
KHANYA	Mosebetsi o phahameng oa ho fetola trim (Ho Beha boemo ba mabone a hokahaneng nakong ea ho lula)		Ho khetha boleng ba hajoale bo potileng joalo ka moeli oa letsatsi. Karolo ena e thusa sesebelisoa hore se sebetse hantle maemong afe kapa afe a 'nete a kopo.
TSIETSO	Ho beha kutlo ea kutlo ea ho lula ha kutlo		Sensor ea khanya ea motšehare e emisa ho sebetsa, 'me motsamao o mong le o mong o bonoang o ka bonesa sesebelisoa sa mabone, ho sa tsotelehe hore na leseli la tlhaho le khanya hakae.
PUSELETSO NAKO	Nako eo Sensor e tla tima (haeba u khetha boemo ba boemo bo itseng ke 0) kapa ho fifatsa leseli ho ea boemong bo tlase kamora hore sebaka se tlosoe.	EMELANG DIM	Ho beha boemo ba tlhahiso ea mabone a hokahaneng nakong ea sekheo. Sensor e tla laola tlhahiso ea mabone boemong bo behiloeng. Ho beha boemo ba STAND-BY DIM ho 0 ho bolela hore khanya e timme nakong ea mosebetsi.
TŠEBELETSO MOTS'EANE	Ho emela maemo a fapaneng a khanya ea tlhaho bakeng sa Sensor.	EMELANG NAKO	Ho emela nako eo Sensor e tla boloka lebone le le boemong bo lefifi bo tlase kamora hore HOLD NAKO e fete.

MOSEBETSI OA LETLOTLO

KONYANE	TLHALOSO	KONYANE	TLHALOSO
ON/ TLOA	Tobetsa konopo ea ON / OFF, leseli le ea ho mokhoa oa ho tima kapa o sa feleng, 'me sensor e holofetse. (O TLAMEHA ho tobetsa konopo ea ho tlohela sena mode bakeng sa Setting.	MOSEBETSI	Tobetsa konopo, sensor e qala ho sebetsa 'me litlhophiso tsohle li lula li tšoana le boemo ba morao-rao pele lebone le tima / le tima.
TLHOKOMELA	Hlahisa li-parameter tsa hajoale / tsa morao-rao ho matšoao a LED (lipontšo tsa LED li tla sebetsa bakeng sa ho bonts'a litlhophiso tsa maemo).	TEKO 2s	Konopo e etselitsoe ho lekola kutloisiso ea sepheo feela. ka mor'a hore u khethe litekanyetso tsa sensitivity, ebe u tobetsa konopo, Sensor e ea tekong (nako ea ho ts'oara ke 2s feela) ka bo eona, ha nako ea ho ema le sensor ea motšehare e holofetse. Tobetsa konopo ea ho tlohela mokhoa ona.
RETS'ELISITSOE	Tobetsa konopo, litlhophiso tsohle li khutlela ho li-setting tsa dip Switch in sensor.
	Kena ka boemo ba ho seta, li-parameter tsa li-remote control li tla khantša ho khethoa. 'me u tsamaee ho ea UP le Down ho khetha li-parameter tse khethiloeng ho matšoao a LED.		Tsamaea ho ea LEFT le HO HODELA ho khetha li-parameter tse khethiloeng ho matšoao a LED.
OK	Netefatsa li-parameter tse khethiloeng ho li-remote control.		Bula le ho koala Sensor e bohlale ea motšehare. Tobetsa  or Kena ka boemo ba ho seta, li-parameter tsa li-remote control li tla khantša ho khethoa, Tobetsa  ho bula kapa ho koala Sensor e bohlale ea motšehare.
ROMELA	Tobetsa konopo, kenya liparamente tsa hajoale ho sensor(s), lebone le etelletsoeng pele leo sensor e le hokelang le tla tima / tima joalo ka ha netefatso.
	4 Mekhoa e nang le li-parameter tse seng li setiloe tse fumanehang hore li ka fetoloa le ho bolokoa ka mekhoa.

TSEBISO

The SETTING Content e na le litlhophiso tsohle tse fumanehang le li-parameter bakeng sa li-sensor tse hole. E u lumella ho fetola taolo e fumanehang, li-parameter, le ts'ebetso ea sensor ho tloha fekthering ea kamehla kapa ea hajoale.

Fetola li-setting tse ngata tsa sensor (s)

1. Tobetsa konopo, li-leds tsa remote control li tla bonts'a liparamente tsa morao-rao tseo u li behileng.
   HLOKOMELA: ha o sututsa konopo pele, o lokela ho tobetsa konopo ho notlolla kutlo.
2. Tobetsa or kenya boemong ba ho seta, li-parameter tsa li-remote control li tla khantša ho khethoa, ho ea sebakeng seo u se batlang ka ho tobetsa. ho khetha li-parameter tse ncha.
3. Tobetsa "OK" ho netefatsa litlhophiso tsohle le ho boloka.
4. Ikemisetse ho sensor e shebiloeng ebe u tobetsa ho kenya paramente e ncha, lebone le etelletsoeng pele leo sensor e le hokelang le tla tima / tima joalo ka ha ho netefatsoa.
   HLOKOMELA: Setting e sebetsa mohato oa bohlokoa ke ka Push or , kenya boemong ba ho seta.
   HLOKOMELA: lebone le etelletsoeng pele leo sensor e le hokahanyang le tla tima / tima kamora ho fumana paramente e ncha joalo ka netefatso.
   HLOKOMELA: Haeba o tobetsa konopo, litsupa tse etelletsoeng pele tse hole li tla bonts'a liparamente tsa morao-rao tse rometsoeng.

Fetola li-setting tse ngata tsa li-sensor tse nang le sensor e bohlale ea photocell Open

1. Tobetsa , li-remote lead indicators li tla bontša li-parameter tsa morao-rao.
2. Tobetsa or kenya boemong ba ho beha, parameter Led indicators of remote control e tla khantša ho khethoa.
3. Tobetsa , Lits'oants'o tse 2 tse etelletsoeng pele li tla benya maemong a sensor ea mots'eare, khetha letsatsi  joalo ka sebaka sa ho bonesa Ka ho iketsa , khetha motšehare e le sebaka sa ho tima ka ho iketsa.
4. Tobetsa ho netefatsa disetting tsohle le ho boloka
5. Lebisa ho sensor e shebiloeng ebe u tobetsa ho kenya paramethara e ncha. Lebone le etelletsoeng pele leo sensor e le hokahanyang le tla tima / le tima.

HLOKOMELA: e emisitsoe ka ho sa feleng

1. Bula kapa u koale sensor e bohlale ea motšehare ka ho sututsa ha remote control e le boemong ba ho seta.
2. Ha sensor e bohlale ea motšehare e buloa, matšoao a 2 a Led a khanya sebakeng sa sensor ea motšehare. khetha khanya ea letsatsi joalo ka sebaka sa ho bonesa Ka ho iketsa , khetha motšehare e le setpoint to light off automatic.Ha sensor e bohlale ea motšehare e koala, 1 Led indicator ke ho benya ka har'a setsi sa sensor ea motšehare bakeng sa ho khetha moeli oa sensor ea motšehare.
3. Ha sensor e bohlale ea motšehare e buloa, nako ea ho ema ke eona feela  .
4. Sensor e bohlale ea motšehare e nka sebaka sa senor se tloaelehileng sa photocell mme e sebetsa ka boikemelo.

Mosebetsi oa Corridor

Ts'ebetso ena ka har'a sensor ea motsamao ho fihlela taolo ea maemo a mararo, bakeng sa libaka tse ling tse hlokang tsebiso ea phetoho e bobebe pele e tima. Sensor e fana ka maemo a 3 a khanya: 100% -> leseli le lefifi (leseli la tlhaho ha lea lekana) -> tima; le linako tse 2 tsa nako ea ho leta e khethiloeng: nako ea ho ts'oara le nako ea ho ema; Sebaka se ikhethileng sa khanya ea letsatsi le sebaka sa bolokolohi ba ho lemoha.

• Ka khanya ea tlhaho e lekaneng, lebone ha le khantše ha boteng bo bonoa.
  
• Ka khanya e sa lekaneng ea tlhaho, sensara e khantša lebone ka bo eona ha boteng bo bonoa.
  
• Ka mor'a nako e khuts'oane, lebone lea fifala ho ea boemong bo emeng haeba leseli la tlhaho le potolohileng le le ka tlase ho moeli oa letsatsi.
  
• Leseli le itima hang ka mor'a hore nako ea ho ema.
  

Mosebetsi oa Mots'eare oa Sensor

Bula sensor ea motšehare ka ho sutumetsa ha remote control e le boemong ba ho seta.

Litlhophiso mabapi le pontšo ena

Nako ea ho ts'oara: 30min
setpointtolighton: 50lux
Emeng haufi Dim: 10%
Nako ea ho ema: +∞
sebaka sa ho tima: 300lux
(ha sensor e bohlale ea photocell e buloa, nako ea ho ema ke +∞ feela)

• Leseli le khantša ka 100% ha ho na le motsamao o bonoang.
  
• Leseli lea fifala ho ba boemong ba ho ema ka mor'a nako.
  
• Leseli le lula le fifala bosiu.
  
  
• Ha leseli la tlhaho le feta sebaka se behiloeng ho khanya, lebone le tla tima leha sebaka se le teng.
  
• Leseli le ikemela ka 10% ha leseli la tlhaho le sa lekana (ha le sisinyehe).
  

Mosebetsi oa Corridor VS Motšehare oa Sensor Mosebetsi

1. Ha u le phasejeng, bulela lebone LE TLAMEHA ka boemo ba tlhaho bo tlase ba sensor ea motšehare le Occupancy. Ka ts'ebetso e bohlale ea sensara ea mots'eare, bonesa lebone ka boemo bo tlase ba khanya ea motšehare hore le bonese le haeba ho se na sekheo.
2. Sebakeng sa "corridor function", tima leseli ka nako ea ho ema ha ho se na sekheo. Ka ts'ebetso e bohlale ea sensor ea motšehare, tima lebone ka boemo ba khanya ea tlhaho bo phahameng ho feta sets'oants'o sa mots'eare ho tima leha o le teng.
3. Ka ts'ebetso e bohlale ea sensor ea mots'eare, boemo ba leseli la tlhaho bo bobebe / bo tlase ho feta sebaka sa mots'eare ho tima / ho bulela TSOELA ho boloka bonyane metsotso e 1, e tla tima / ho bonesa lebone ka bo eona.

Mabapi le RESET le MODE(1,2,3,4)

Remoutu control e tla le 4 Scene MODES tseo e seng tsa kamehla. U ka etsa li-parameter tse lakatsehang 'me ua li boloka e le MODE e ncha (1,2,3,4) ho hlophisa li-sensor tse kentsoeng.

SETA HAPE: litlhophiso tsohle li khutlela ho li-setting tsa DIP Switch in sensor.

MEKHOA YA SENESE(1 2 3 4)

MOKHOA	KHANYA	TSIETSO	PUSELETSO NAKO	TŠEBELETSO MOTS'EANE	EMELANG DIM	EMELANG NAKO

Fetola MODES

1. tobetsa ///konopo, li-remote control Led indicators li bontša li-parameter tse teng.
2. tobetsa ho khetha liparamente tse ncha.
3. Tobetsa ho netefatsa liparamente tsohle le ho boloka mokhoeng.

HLOKOMELA

Mosebetsi oa ho kenya o u lumella ho lokisa sensor ka liparamente tsohle ts'ebetsong e le 'ngoe. U ka khetha CURRENT SETTING parameters kapa MODE bakeng sa ho kenya. Litlhophiso tsa hajoale kapa MODE li hlahisoa ho Remote control.

Kenya liparamente tsa hajoale ho sensor(s),'me u phete liparamente tsa sensor ho ea ho tse ling

1. Tobetsa konopo kapa tobetsa /// , liparamente tsohle li bonts'oa ho Remote control
   Hlokomela: hlahloba hore na li-parameter kaofela li nepahetse, haeba ho se joalo, li fetole.
2. Sheba ho sensor ebe o tobetsa konopo , lebone leo sensor e le kopanyang le tla ba le / tima joalo ka ha ho netefatsoa.

Hlokomela: haeba sensor e 'ngoe e hloka li-parameter tse tšoanang, sheba feela sensor ebe u tobetsa konopo.

Litokomane / Lisebelisoa

SALIFY RC-100 Sensor Remote Programmer [pdf] Buka ea Taelo RC-100, Sensor Remote Programmer, RC-100 Sensor Remote Programmer

Litšupiso

• Bukana ea Mosebelisi