SloanLED RC-100 Sensor Remote Programmer

UMARNIN AIKI

BAYANI

Tushen wutan lantarki	2 x AAA 1 5V baturi, Alkaline ya fi so
Harka mai ɗaukar nauyi	RC-100 a cikin akwati
Kewayon lodawa	Har zuwa 15 m (50 ft.)
Op. zafin jiki	0°C-50°C (32°F- 122°F)
Girma	123x70x20.3 mm (4" x84" x2.76. 0")

GARGADI: Cire batura daga daki idan ba za a yi amfani da nesa a cikin kwanaki 30 ba.

KARSHEVIEW

Kayan aikin Kanfigareshan mara waya mara igiyar nesa na IR kayan aiki ne na hannu don daidaita nesa na na'urori masu auna firikwensin da aka kunna IA. Kayan aikin yana ba na'urar damar yin gyare-gyare ta hanyar maɓallin turawa ba tare da tsani ko kayan aiki ba, kuma tana adana har zuwa yanayin sigar firikwensin firikwensin don saurin daidaita na'urori masu auna firikwensin.
Ikon nesa yana aika saitin firikwensin a tsayin tsayi har zuwa ƙafa 50. Na'urar zata iya nuna sigogin firikwensin da aka kafa a baya, kwafin sigogi da aika sabbin sigogi ko ma'aunin sigar ajiyafiles. Don ayyukan da za'a iya son saituna iri ɗaya a cikin ɗimbin wurare ko wurare, wannan ƙarfin yana ba da ingantaccen hanyar daidaitawa. Ana iya kwafi saituna a ko'ina cikin rukunin yanar gizon, ko a cikin shafuka daban-daban.

MALAMAI LED

LED	BAYANI	LED	BAYANI
HASKE	Babban aikin juyi datsa (Don saita matakin fitarwa na hasken da aka haɗa yayin zama)		Don zaɓar ƙimar lux ɗin da ke kewaye na yanzu azaman ƙofar hasken rana. Wannan fasalin yana ba da madaidaicin damar yin aiki da kyau a kowane yanayi na aikace-aikacen gaske.
HANKALI	Don saita azancin zama na Sensor		Na'urar firikwensin hasken rana yana daina aiki, kuma duk motsin da aka gano zai iya kunna na'urar hasken wuta, komai hasken halitta.
RIKE LOKACI	Lokacin da Sensor zai kashe (idan kun zaɓi matakin jiran aiki shine 0) ko rage hasken zuwa ƙaramin matakin bayan an bar wurin	TSAYE-BY DIM	Don saita matakin fitarwa na hasken da aka haɗa a lokacin sarari. Na'urar firikwensin zai daidaita fitowar haske a matakin da aka saita. Saita matakin STAND-BY DIM a 0 yana nufin haske ya cika lokacin wurin zama.
SENSOR HASKEN RANA	Don wakiltar ƙofa daban-daban na matakin hasken halitta don Sensor.	LOKACI MAI TSAYA	Don wakiltar lokacin da firikwensin zai kiyaye hasken a ƙananan ƙananan matakin bayan TIME HOLD ya wuce.

MAGANAR BUTTON

BUTTON	BAYANI	BUTTON	BAYANI
	Danna maɓallin, hasken yana tafiya zuwa dindindin a kunne ko yanayin kashe dindindin, kuma firikwensin yana kashe. (DOLE danna maɓallin @ don barin wannan yanayin don Saiti.		Latsa maɓallin 8, firikwensin ya fara aiki kuma duk saituna sun kasance iri ɗaya da sabon matsayi kafin a kunna/kashe haske.
	Nuna sigogin saiti na yanzu / na ƙarshe a cikin alamun LED (alamomin LED za su kunna don nuna sigogin saiti).		Maɓallin don dalilai na gwaji ne kawai. Bayan ka zaɓi ƙofofin hankali, sannan ka danna maɓallin, firikwensin yana zuwa yanayin gwaji (lokacin riƙewa kawai 2s) ta atomatik, yayin da lokacin jiran aiki da firikwensin hasken rana suna naƙasasshe. Danna maɓallin @ don barin wannan yanayin.
	Danna @ button, duk saituna suna komawa zuwa saitunan tsoma Canja a firikwensin.
	Shigar da yanayin saitin, madaidaicin ledojin na sarrafa ramut zai yi haske don zaɓar. kuma Kewaya zuwa sama da ƙasa don zaɓar sigogin da aka zaɓa a cikin alamun LED.		Kewaya zuwa HAGU da DAMA don zaɓar sigogin da aka zaɓa a cikin alamun LED.
	Tabbatar da sigogin da aka zaɓa waɗanda aka zaɓa a cikin kulawar ramut.		Buɗe kuma rufe firikwensin hasken rana mai wayo. Latsa @ ko (!) Shiga cikin yanayin saitin, madaidaicin ledojin ramut zai yi walƙiya don zaɓar, Danna @ don buɗe ko rufe firikwensin hasken rana.
	Danna maɓallin @, loda sigogi na yanzu zuwa firikwensin(s), hasken jagoranci wanda firikwensin haɗi zai kunna/kashe kamar yadda tabbatarwa.
	4 Yanayin yanayi tare da saitattun sigogi waɗanda ke akwai don canzawa da adana su a cikin yanayi.

KASANCEWA

Abun cikin SETTING ya ƙunshi duk saitunan da ake samu da sigogi don firikwensin nesa. Yana ba ku damar canza ikon sarrafawa, sigogi, da aiki na firikwensin daga tsohowar masana'anta ko sigogi na yanzu. Canja saitunan firikwensin (s) da yawa

1. Latsa maballin, ledojin ramut zai nuna sabbin sigogin da kuka saita.
2. Danna @ or® shigar da yanayin saitin, madaidaicin ledojin ramut zai yi walƙiya don zaɓar, kewaya zuwa saitunan da ake so ta danna@®@® don zaɓar sabbin sigogi.
3. Danna Ok don tabbatar da duk saiti da adanawa.
4. Nufin firikwensin manufa kuma latsa don loda sabon siga, hasken jagoranci wanda firikwensin ya haɗa zai kunna/kashe a matsayin tabbaci.

• NOTE: maɓalli na saitin yana aiki ta Push @ or ®, shigar da yanayin saitin.
• NOTE: Hasken jagora wanda firikwensin ke haɗawa da shi zai kunna/kashe don tabbatar da karɓar sabbin sigogi
• NOTE: Idan ka danna maballin§, alamun jagora mai nisa za su nuna sabbin sigogin da aka aiko.

Canja saituna masu yawa na firikwensin tare da buɗaɗɗen firikwensin photocell mai kaifin baki

1. Latsa S, alamun jagora na nesa zasu nuna sabbin sigogi.
2. Latsa ko shigar da yanayin saitin, madaidaicin Led masu nuni na iko mai nisa za su yi walƙiya don zaɓar.
3. Latsa alamun jagora 2 za su yi haske a saitunan firikwensin hasken rana, zaɓi hasken rana azaman saiti zuwa haske ta atomatik, zaɓi hasken rana azaman saiti don kunnawa ta atomatik.
4. Danna don tabbatar da duk saiti da adanawa.
5. Nufin firikwensin manufa kuma latsa don loda sabon siga. Hasken jagora wanda firikwensin ya haɗa zai kunna/kashe.

BA E:  an kashe shi ta tsohuwa.

1. Buɗe ko rufe firikwensin hasken rana mai wayo ta hanyar turawa lokacin da ikon nesa ke cikin saiti.
2.  Lokacin da firikwensin hasken rana mai wayo ya buɗe, alamun Led 2 suna walƙiya a saitin firikwensin hasken rana. zaɓi hasken rana G azaman saiti zuwa haske ta atomatik, zaɓi hasken rana azaman saiti don kunnawa ta atomatik.Lokacin da firikwensin hasken rana ke rufe, 1 Led yana walƙiya a cikin saitin firikwensin hasken rana don zaɓi kofa na firikwensin hasken rana.
3. Lokacin da firikwensin hasken rana ya buɗe, lokacin jiran aiki shine kawai 8
4.  Smart hasken rana firikwensin yana faruwa na al'ada na photocell senor kuma yana aiki da kansa.
5.  Duba Ayyukan Sensor Hasken Rana.

Ayyukan Corridor

Wannan aikin a cikin firikwensin motsi don cimma ikon sarrafa matakin uku. ga wasu wuraren da ke buƙatar sanarwar canjin haske kafin kashewa. Firikwensin yana ba da matakan haske 3: 100% -> haske mai duhu (hasken halitta bai isa ba) -> kashe; da lokutan 2 na lokacin jiran da za a zaɓa: lokacin riƙe motsi da lokacin jiran aiki; Zaɓaɓɓen ƙofar hasken rana da yancin gano wuri.

Ayyukan Sensor Hasken Rana

Buɗe firikwensin hasken rana ta push@lokacin da ikon nesa ya kasance cikin yanayin saiti.

Ayyukan Corridor VS Ayyukan Sensor Hasken Rana.

1. ln corridor aiki, kunna hasken dole ne ta yanayin matakin haske ƙasan saitunan firikwensin rana da zama. A cikin aikin firikwensin hasken rana, kunna hasken ta matakin matakin hasken rana ƙasan madaidaicin hasken rana zuwa haske ko da sarari.
2. A cikin aikin corridor, kashe haske ta ƙare lokacin jiran aiki idan sarari. A cikin aikin firikwensin hasken rana, kashe hasken ta matakin haske na halitta sama da saitin hasken rana zuwa kashe ko da zama.
3. Aikin firikwensin hasken rana mai kaifin baki, matakin haske na halitta ya fi sauƙi/ƙasa da saitin hasken rana zuwa kashe/ kunna dole ne a kiyaye aƙalla minti 1, wanda zai kashe/ kunna hasken ta atomatik.

Game da SAKE STARWA da MODE (1,2,3,4)
Ikon nesa ya zo tare da MODES Scene 4 waɗanda ba tsoho ba. Kuna iya yin sigogin da ake so kuma ku adana azaman sabuwar MODE(1,2,3,4) don saita firikwensin da aka shigar.
SATI: duk saituna suna komawa zuwa saitunan DIP Switch a cikin firikwensin.
Hotunan Hotuna (1 2 3 4)

Aikace-aikace	Zaɓuɓɓukan Scene	Haske	Yankin Ganowa	Rike Lokaci	Lokacin Tsayawa	Matsayin Dim na tsaye	Sensor Hasken Rana
Cikin gida	Yanayin 1	100.	75%	5min	30min	30%	@
Cikin gida	Yanayi2	100%	75%	1min	+ ku	30%	@
Cikin gida	Yanayi3	100.	75%	5min	30min	30%	30LUX
Waje	Yanayi4	100%	75%	1min	+ ku	30%	@ (30LUX/300LUX)

Canja MODES:

1.  latsa @ @! @! @ maballin, Manufofin Led na nesa suna nuna sigogin da ke akwai.
2. danna @(!)@(B don zaɓar sabbin sigogi.
3. Latsa (§) don tabbatar da duk sigogi da adanawa a cikin yanayin.

KYAUTA

Ayyukan upload yana ba ku damar saita firikwensin tare da duk sigogi a cikin aiki ɗaya. Kuna iya zaɓar sigogin saiti na YANZU ko MODE don lodawa. Ana nuna sigogin saiti na yanzu ko MODE a cikin Ikon Nesa. Loda sigogi na yanzu zuwa firikwensin (s), kuma a kwafi sigogin firikwensin suna yin juna zuwa wani

1. Maɓallin latsa ko latsa duk sigogi ana nunawa a cikin Ikon Nesa.
   • Lura: duba idan duk sigogi daidai ne, in ba haka ba, canza su.
2.  Nufin firikwensin da maɓallin latsawa, hasken da firikwensin ya haɗa zai kasance a kunne/kashe azaman tabbaci.
   • Lura: idan wasu firikwensin suna buƙatar sigogi iri ɗaya, kawai nufa kan firikwensin kuma danna maɓallin.

Takardu / Albarkatu

SloanLED RC-100 Sensor Remote Programmer [pdf] Jagoran Jagora RC-100, Sensor Remote Programmer

Magana

• Manual mai amfani