SloanLED RC-100 Sensor Remote Programmer

OPERATION MIrairo

SECIFICATIONS

Magetsi	2 x AAA 1 5V bhatiri, Alkaline inodiwa
Kutakura kesi	RC-100 mubhokisi rekutakura
Upload range	Kusvikira ku15 m (50 ft.)
Op. tembiricha	0°C- 50°C (32°F- 122°F)
Dimensions	123x70x20.3 mm (4. 84″ x2.76″ x0. 8″)

YAMBIRO: Bvisa mabhatiri kubva mukamuri kana kure kure kusazoshandiswa mumazuva makumi matatu.

PAKUPEDZAVIEW

Iyo remote control Wireless IR Configuration Tool chishandiso chakabatwa neruoko chekumisikidza kure kweIA-inogonesa fixture integrated sensors. Chishandiso chinogonesa mudziyo kugadzirisa kuburikidza nepushbutton isina manera kana maturusi, uye inochengeta kusvika mana sensor parameter modes kuti ikurumidze kugadziridzwa kweakawanda sensors.
Iyo remote control inotumira sensor kuseta pakukwira kureba kusvika ku50 tsoka. Chishandiso chinogona kuratidza zvakambomiswa sensor paramita, kukopa paramita uye kutumira mitsva mitsva kana chitoro paramende profiles. Kune mapurojekiti ayo magadzirirwo akafanana anogona kudiwa munzvimbo dzakawanda kana nzvimbo, kugona uku kunopa nzira yakagadziridzwa yekumisikidza. Zvirongwa zvinogona kukopwa munzvimbo yese, kana munzvimbo dzakasiyana.

ZVIRATIDZO zve LED

LED	DESCRIPTION	LED	DESCRIPTION
KUpenya	High end trim turning function (Kuisa iyo inobuda nhanho yemwenje yakabatana panguva yekugara)		Kuti usarudze kukosha kwazvino kwakatenderedza lux sechikumbaridzo chemasikati. Iyi ficha inoita kuti chigadziriso chishande nemazvo mune chero mamiriro chaiwo ekushandisa.
KUNZWISISA	Kuseta iyo occupancy inonzwa kunzwa kweSensor		Iyo sensor yemasikati inomira kushanda, uye mafambiro ese akaonekwa anogona kubatidza mwenje wemwenje, zvisinei nekupenya kwakadii kwechiedza chechisikigo.
NGUVA YAKABATA	Iyo nguva iyo Sensor ichadzima (kana ukasarudza kumira-ne nhanho ndeye 0) kana kudzima mwenje kusvika padanho rakaderera mushure mekunge nzvimbo yabviswa	MIRA-BY DIM	Kuseta chikamu chekubuda chemwenje wakabatana panguva yevacancy. Iyo sensor inogadzirisa kubuda kwemwenje padanho rakaiswa. Kuseta STAND-BY DIM level pa0 zvinoreva kuti chiedza chizere chadzimwa panguva yebasa.
DAYLIGHT SENSOR	Kumiririra zvikumbaridzo zvakasiyana-siyana zvemwenje wechisikigo mwero weSensor.	MIRA-BY NGUVA	Kumiririra nguva iyo Sensor ichachengeta mwenje uri pazasi diki mushure mekunge KUBATA NGUVA kwapera.

BUTTON OPERATION

BUTTON	DESCRIPTION	BUTTON	DESCRIPTION
	Dzvanya bhatani, mwenje unoenda kune zvachose on kana zvachose off mode, uye sensor yakaremara. (NOFANIRA kudzvanya @ bhatani kuti usiye iyi modhi yeSetting.		Dzvanya 8 bhatani, sensor inotanga kushanda uye zvese zvigadziriso zvinoramba zvakangofanana neazvino chimiro mwenje usati wadzima / kudzima.
	Ratidza zvazvino / zvekupedzisira zvigadziriso zviratidzi mu LED zviratidzi (iyo ma LED maratidziro achabatirira ekuratidza marongero paramita).		Bhatani nderekuyedza chinangwa chekunzwa chete. mushure mekusarudza zvikumbaridzo zvekunzwa, wobva wadzvanya bhatani, Iyo sensor inoenda kuyedza mode (nguva yekubata ingori 2s) otomatiki, ukuwo iyo yekumira-nenguva uye masikati sensor yakaremara. Dzvanya @ bhatani kuti usiye iyi modhi.
	Dzvanya @ bhatani, zvese zvigadziriso zvinodzokera kune zvigadziriso zve dip Shandura mu sensor.
	Pinda mumamiriro ekugadzirisa, iyo parameter inotungamira yeremote control inopenya kuti isarudzwe. uye Famba uchienda UP uye Pasi kuti usarudze maparamita akasarudzwa muzviratidzo zve LED.		Famba uchienda KURUSHE uye KURUDHI kuti usarudze maparamita akasarudzwa muzviratidzo zve LED.
	Simbisa iyo yakasarudzwa paramita yakasarudzwa paramita muremote control.		Vhura uye vhara smart masikati Sensor. Dzvanya @ kana (!) Pinda mumamiriro ekugadzirisa, iyo parameter inotungamira yeremote control ichapenya kuti isarudzwe, Dzvanya @ kuti uvhure kana kuvhara smart masikati Sensor.
	Dzvanya @ bhatani, rodha yazvino paramita kune sensor (s), iyo inotungamira mwenje iyo sensor zvinobatanidza zvichabatidza/kudzima sekusimbisa.
	4 Scene modes ane preset paramita anowanikwa kuti achinje uye achengetedzwe mumamodhi.

KUGADZIRA

Iyo SETTING Yemukati ine ese anowanikwa marongero uye paramita kune kure sensors. Iyo inokutendera iwe kuti uchinje iripo kutonga, ma paramita, uye kushanda kwe sensor kubva kufekitori default kana yazvino paramita. Chinja akawanda masetirwo e sensor (s)

1. Dzvanya§bhatani, iyo remote control leds inoratidza ichangoburwa paramita yaunoseta.
2. Press@or® pinda mune yekuseta mamiriro, iyo parameter inotungamira yeremote control inopenya kuti isarudzwe, famba uchienda kune yaunoda kuseta nekudzvanya@®@® kusarudza iyo mitsva paramita.
3. Dzvanya ok kusimbisa kuseta kwese uye kuchengetedza.
4. Nanga pane inonongedza sensor uye wodzvanya kuti uise iyo nyowani paramende, iyo inotungamirwa mwenje inosanganisirwa ne sensor ichabatidza / kudzima sekusimbisa.

• CHERECHEDZA: iyo kuseta inoshanda kiyi nhanho ndeye Push @or ®, pinda mune yekumisikidza mamiriro.
• CHERECHEDZA: Iyo inotungamirwa mwenje iyo sensor inobatana nayo ichapenya pa/kudzima kuratidza kugamuchira iwo matsva ma paramita
• CHERECHEDZA: Kana ukadzvanya§ bhatani, iyo iri kure inotungamirwa zviratidzi inoratidza iwo azvino paramita akatumirwa.

Chinja akawanda kuseta kwema sensors ane smart photocell sensor Vhura

1. Dzvanya S, iyo iri kure inotungamirwa zviratidzi inoratidza iwo azvino paramita.
2. Dzvanya kana kupinda mumamiriro ekugadzirisa, parameter Led zviratidzo zve remote control inopenya kuti isarudzwe.
3. Dzvanya 2 led zviratidzo zvinopenya mukati memasikati sensor marongero, sarudza masikati senzvimbo yekuvhenekesa paOtomatiki, sarudza masikati sesetpoint yekudzima Otomatiki.
4. Dzvanya kuti usimbise kuseta kwese uye kuchengetedza.
5. Nanga pane inonongedza sensor uye tinya kuti uise iyo itsva parameter. Iyo inotungamirwa mwenje iyo sensor inobatanidza ichabatidza / kudzima.

HERE E:  inodzimwa nekusingaperi.

1. Vhura kana kuvhara iyo smart lightlight sensor nekusundidzira kana kuremoterwa kuri mukugadzirisa mamiriro.
2.  Kana iyo smart yemasikati sensor yakavhurika, 2 Led zviratidzi zvinopenya mumasikati sensor seti. sarudza chiedza chemasikati G senzvimbo yekuvhenekesa paOtomatiki , sarudza masikati sesetpoint kuti udzime otomatiki.Kana smart daylight sensor yavhara, 1 Led chiratidzo chinopenya mumasikati sensor seti yekusarudza masikati sensor chikumbaridzo.
3. Kana iyo smart masikati sensor yakavhurwa, iyo yekumira-nenguva ingori 8 chete
4.  Smart masikati sensor inotora nzvimbo yakajairika photocell sensor uye inoshanda yakazvimiririra.
5.  Ona Daylight Sensor Basa.

Corridor Basa

Iri basa mukati meiyo inofamba sensor kuti uwane matatu-level control. kune dzimwe nzvimbo dzinoda chiziviso chekuchinja chiedza usati wadzima. Iyo sensor inopa 3 mazinga echiedza: 100% -> mwenje wakadzimwa (mwenje wechisikigo hauna kukwana) -> kure; uye 2 nguva yenguva yakasarudzwa yekumirira: nguva yekufambisa-nguva uye nguva yekumira; Selectable daylight threshold uye rusununguko rwekuona nzvimbo.

Masikati Sensor Basa

Vhura iyo masikati sensor ne push @ kana kure kure control iri mukugadzirisa mamiriro.

Corridor Basa VS Masikati Sensor Basa.

1. ln corridor function, batidza mwenje INOFANIRA neyakagadzika mwenje mwero wakaderera masikati sensor kuseta uye Occupancy. Mune smart daylight sensor function, batidza mwenje nemwenje wechisikigo mwero wakadzika masikati seti kuti uvheneke kunyangwe paine vacancy.
2. ln corridor function, dzima mwenje nekumira-nenguva kupera kana vacancy. Mune smart daylight sensor function, dzima mwenje neyakasikwa mwenje mwero wakakwira kupfuura masikati setpoint kuti udzime kunyangwe uchigara.
3. ln smart daylight sensor function, yakasikwa mwenje mwero yakareruka/ yakaderera pane masikati setpoint kudzima/pa INOFANIRA kuchengeta kanenge 1 mintue, inozodzima/pachiedza otomatiki.

Nezve RESET neMODE(1,2,3,4)
Iyo remote control inouya ne 4 Scene MODES iyo isiri default. Iwe unogona kugadzira maparamita aunoda uye chengetedza seMODE itsva (1,2,3,4) kugadzirisa masensa akaiswa.
Dzorera zvakare: zvese zvigadziriso zvinodzokera kune zvigadziriso zveDIP Shandura mu sensor.
ZVIMWE ZVIRI MUKATI (1 2 3 4)

Application	Scene Options	Kupenya	Nzvimbo Yekucherechedza	Bata Nguva	Nguva Yakamira	Stand-by Dim Level	Daylight Sensor
Indoor	Modhi 1	100.	75%	5min	30min	30%	@
Indoor	Mamiriro2	100%	75%	1min	+oo	30%	@
Indoor	Mamiriro3	100.	75%	5min	30min	30%	30LUX
Kunze	Mamiriro4	100%	75%	1min	+oo	30%	@(30LUX/300LUX)

Chinja maMODE:

1.  press@ !@!@!@ bhatani, iyo remote control Led zviratidzo zvinotaridza ma parameter aripo.
2. dzvanya @(!)@(B kusarudza mitsva mitsva.
3. Dzvanya (§)kusimbisa ese ma paramita uye kuchengetedza mumodhi.

UPLOAD

Basa rekurodha rinokutendera kuti ugadzirise sensor ine ese ma parameter mukuita kumwe chete. Unogona kusarudza CURRENT SETTING paramita kana iyo MODE yekurodha. Yazvino kuseta ma paramita kana iyo MODE inoratidzwa muRemote control. Isa ma paramita azvino kune sensor (s), uye dzokorora ma sensor paramita kuita imwe kune imwe

1. Dzvanya bhatani kana kudzvanya ese ma paramita anoratidzwa mu Remote control.
   • Cherechedza: tarisa kana ese ma paramita akarurama, kana zvisiri, shandura iwo.
2.  Tarisa pane sensor uye dzvanya § bhatani, mwenje unobatanidza sensor uchave wakabatidzwa / wakadzima sekusimbisa.
   • Cherechedza: kana imwe sensor ichida ma parameter akafanana, ingonanga kune sensor uye wodzvanya bhatani.

Zvinyorwa / Zvishandiso

SloanLED RC-100 Sensor Remote Programmer [pdf] Bhuku reMirayiridzo RC-100, Sensor Remote Programmer

References

• User Manual