Quantek Proximity Switch Bakeng sa Ts'ebetso le Litaelo tsa Taolo ea Phihlello

Proximity Switch Bakeng sa Ts'ebetso le Taolo ea Phihlello

“

Tlhahisoleseding ya Sehlahiswa

Litlhaloso:

• Proximity switch bakeng sa ho kenya tshebetsong le taolo ya phihlello
• E apesitsoe ka thata, e manganga, e thibela ho bonahatsa, anti-microbial
  Steritouch acrylic label
• Leibole kaofela ha le bonolo
• Maqhubu a seea-le-moea: 868MHz
• Phepelo ea Matla: 4 x AA libetri bakeng sa yuniti, 12/24Vdc bakeng sa
  moamoheli
• Hoo e ka bang ts'ebetso ea 100,000 ea bophelo ba betri
• Litekanyo: Yuniti - (litekanyo tse khethehileng ha lia fanoa), Moamoheli
  - 65 x 50 x 30 mm

Litaelo tsa Tšebeliso ea Sehlahisoa

Kemiso:

1. Netefatsa bolelele ba ho lokisa.
2. Sebelisa poleiti e ka morao ho tšoaea lesoba la cable le ho lokisa screw
   lintlha.
3. Lokisa sekurufu se kaholimo (No 8 kapa 10) u siea 4mm ea screw
   shaft e hlahelletseng.
4. Kenya tiiso e ka morao ka morao ho poleiti e ka morao (haeba e kentsoe
   kantle).
5. Beha thapo ka poleiti e ka morao 'me u etse likhokahano kapa
   hokela sekotwana sa betri le lenaneo ho moamohedi.
6. Beha poleiti e ka morao sebakeng, hook unit ka holimo
   retaining screw mme o lekane sekurufu sa tlase sa ho boloka.

Litšoantšo tsa Wiring:

Sheba litšoantšo tse fanoeng tsa wiring bakeng sa sensara e thata
wiring le ho fetola sebopeho sa mebala ea LED ha ho hlokahala.

Lenaneo la seea-le-moea (RX-2):

1. Moamoheli oa thepa ka matla a 12/24Vdc.
2. Liphetho tsa terata ho kenya li-terminals ho sistimi (hloekile,
   ka tlwaelo bula mabitso).
3. Tobetsa o lokolle konopo ea ho ithuta, ebe o sebelisa ho thetsa
   sensor nakong ea metsotsoana e 15 ho e hlophisa.
4. Ho seta moamoheli botjha, tobetsa o hatelle konopo ya ho ithuta bakeng sa 10
   metsotsoana ho fihlela thuto ea LED e qala ho benya.

LBH

P: Ke etsa joang ho tsosolosa moamoheli?

A: Ho seta moamoheli botjha, tobetsa o hatelle konopo ya ho ithuta bakeng sa 10
metsotsoana ho fihlela thuto ea LED e qala ho benya. Ka mor'a sena, memori
e tla hlakoloa.

P: Ho hakanngoa hore bophelo ba betri ea yuniti ke bofe?

A: Yuniti e na le bophelo ba betri e ka bang 100,000
ts'ebetso.

"`

Kemiso:

ARCHITRAVE & Round Manual
Proximity switch bakeng sa ho kenya tshebetsong le taolo ya phihlello
E apesitsoe ka thata, e manganga, e thibela ho bonahatsa, anti-microbial Steritouch acrylic label Leibole eohle e hlokolosi www.quantek.co.uk 01246 417113

Netefatsa bolelele ba ho lokisa.

Sebelisa poleiti e ka morao ho tšoaea lesoba la thapo le lintlha tsa ho lokisa li-screw, yuniti e chitja e ka shebisoa ho basebelisi ba atamelang.

Lokisa sekurufu se ka holimo (No 8 kapa 10) se siea 4mm ea screw shaft e hlahelletse.

Kenya tiiso e ka morao ka morao ea poleiti e ka morao (haeba e kenngoa ka ntle)

Beha thapo ka poleiti e ka morao 'me u kopanye (sheba ka tlase) kapa hokela sekotwana sa betri le lenaneo ho moamoheli (sheba leqephe le latelang).

Beha poleiti e ka morao sebakeng, yuniti ea hoko holim'a screw e kaholimo 'me u kenye sekurufu se tlase sa ho boloka.

Litlhaloso tse entsoeng ka thata: 12 28v dc 8mA (standby) / 35mA (max) +18mA LEDs Sensitivity - Touch - ho fihla ho 70mm matsoho mahala Khetho e khubelu, e tala, e putsoa ea LEDs Sounder ha e sebelisoa Timer 1 - 27 metsotsoana ea Latching

Architrave Round

Litšoantšo tsa lithapo
Wiring ea sensor e entsoeng ka thata. Fetola sebopeho sa mebala ea LED kamoo ho hlokahalang.

Ka tloaelo bula mabitso. 0v khutlela
12-28Vdc NO kenya tshebetsong
0V khutlela 0V
Latch jumper Momentary Latching

Ka tloaelo bula mabitso. +v khutla
12-28Vdc NO kenya tshebetsong
+V khutlela 0V
Remote switch
CHE (Ha ho boikhethelo)

Sensitivity dip-switches
1 - Low 4 - Holimo Tlosa matla a ho fetola mefuta e mengata ea matla

Ho utloahala
Sebala nako
1-27 metsotsoana Anti-clockwise ho eketsa nako

Tlhokomeliso: Le ka mohla u se ke ua hokela letho ho terminal ea RD

Mananeo a seea-le-moea (RX-2)
Moamoheli oa thepa ka matla a 12/24Vdc. +V ho isa ho 12/24V terminal, -V ho ea GND terminal. LED e tla khantša haeba e tsamaisoa hantle
Lintho tse hlahisoang ke mohala ho kenya li-terminals ho sistimi (likhokahano tse hloekileng, hangata li bulehile)
Tobetsa 'me u lokolle konopo ea ho ithuta, LED ea ho ithuta e tla khantša metsotsoana e 15
Ka metsotsoana e 15, sebelisa sensor ea ho ama
The ithutoang LED e tla khanya ho netefatsa hore e hlophisitsoe Tlhokomeliso: Lenaneo la li-sensor tsa Touch ho mocha oa 1. Moamoheli oa RX-T o tla hlokahala haeba o hloka ho li hlophisa lichabeng tse fapaneng. Hape hoa khonahala ho hlophisa li-transmitters tsa rona tse tšoaroang ka letsoho le desk (CFOB, FOB1-M, FOB2-M, FOB2-MS, FOB4- M, FOB4-MS, DDA1, DDA2) ho moamoheli ona re sebelisa mokhoa o tšoanang. Sheba lebokose la transmitter bakeng sa lintlha tse ling.
Seta bocha: Ho seta moamoheli bocha, tobetsa 'me u tšoare konopo ea ho ithuta metsotsoana e 10 ho fihlela thuto ea LED e qala ho benya. Kamora moo, memori e tla hlakoloa

Tlhaloso ea seea-le-moea
868MHz 4 x AA libetri Hoo e ka bang 100,000 ts'ebetso e utloahala e le molumo le LED e tala ha e kenya ts'ebetsong Moralo oa ho boloka betri, yuniti e tla sebetsa hanngoe feela ha letsoho le ka sala le bulehile.
Tlhaloso ea moamoheli
12/24Vdc phepelo ea 868MHz likanale tse peli 2A 1Vdc hangata e bula likhokahano tsa Momentary/bi-stable tse ka khethoang 24 code memory Melemo: 200 x 65 x 50 mm

Litlhophiso tsa Dipswitch

ON

TLOA

1

CH1 - Bi-Stable

CH1 - Nakoana

2

CH2 - Bi-Stable

CH2 - Nakoana

Video ea mananeo

Litokomane / Lisebelisoa

Quantek Proximity Switch Bakeng sa Ts'ebetso le Taolo ea Phihlello [pdf] Litaelo TS-AR, TS SQ, Proximity Switch For Activation and Access Control, Switch For Activation and Access Control, Activation and Access Control, le Access Control, Access Control.

Litšupiso

• Bukana ea Mosebelisi