FOS theknoloji Fader Desk 48 Console

FOS Fader Desk 48 - MANAKO EA MOSEBETSI

TLHALOSO KAKARETSO

Rea leboha ha u rekile lihlahisoa tsa rona hape. Ho ntlafatsa ts'ebetso ea yuniti ena, ka kopo bala litaelo tsena tsa ts'ebetso ka hloko ho tloaelana le lits'ebetso tsa mantlha. Yuniti ena e kile ea lekoa fekthering pele e romelloa ho uena, ha ho kopano e hlokahalang. Likarolo tsa eona li kenyelletsa:

• 48 likanale tsa taolo tsa DMX
• 96 mananeo a chaser
• 2 Li-cross-fader tse ikemetseng li fihlella ho laola likanale tsohle
• Pontšo ea LCD ea 3 Digit
• Theknoloji ea dijithale e amohetsoe
• Memori ea ho hloleha ha matla
• Likou tse tloaelehileng tsa MIDI le DMX
• E matla ea ho hlophisa lenaneo
• Mefuta e fapaneng ea ho matha
• Mananeo a mang a ka sebetsa ka sync

Ka kopo, boloka bukana ena sebakeng se sireletsehileng ka mor'a ho bala, e le hore u ka e sheba bakeng sa lintlha tse ling nakong e tlang.

TEMOSO

1. Ho thibela kapa ho fokotsa kotsi ea ts'oaetso ea motlakase kapa mollo, u se ke ua pepesetsa yuniti ena pula kapa mongobo.
2. Ho hlakola memori hangata ho ka baka tshenyo ho chip ya memori, hlokomela hore o se ke wa qala yuniti ya hao hangata ho qoba kotsi ena.
3. Sebelisa feela adaptara ea motlakase ea AC/DC e khothalelitsoeng.
4. Etsa bonnete ba hore u boloka lebokose la ho paka haeba u ka tlameha ho khutlisa yuniti bakeng sa ts'ebeletso.
5. Se ke oa tšela lino tse ling kapa metsi ka har'a kapa holim'a hau ampmoqhobi.
6. Etsa bonnete ba hore sehokelo sa motlakase sa lehae se ts'oana le vol kapa vol e hlokahalangtage bakeng sa hau ampmoqhobi.
7. Se ke oa leka ho sebelisa yuniti ena haeba thapo ea motlakase e robehile kapa e robehile. Ka kopo tsamaisa thapo ea hau ea motlakase ho tsoa tseleng ea sephethephethe sa maoto.
8. U se ke ua leka ho tlosa kapa ho khaola karolo ea fatše ho tloha thapo ea motlakase. Prong ena e sebelisetsoa ho fokotsa kotsi ea ho tsosoa ke motlakase le mollo haeba ho ka ba le khutso e ka hare.
9. Tlosa motlakase o ka sehloohong pele o etsa mofuta ofe kapa ofe oa khokahanyo.
10. U se ke ua tlosa sekoahelo se ka holimo tlas'a maemo leha e le afe. Ha ho na likarolo tse ka sebelisoang ke basebelisi ka hare.
11. Hlakola matla a mantlha a yuniti ha a tlohetsoe a sa sebelisoe nako e telele.
12. Sesebelisoa sena ha se reretsoe ho sebelisoa lapeng.
13. Lekola karolo ena ka hloko bakeng sa tšenyo e ka bang teng nakong ea sekepe. Haeba yuniti e bonahala eka e senyehile, u se ke ua leka ho sebetsa, ka kopo ikopanye le morekisi oa hau.
14. Sehlopha sena se lokela ho sebetsoa ke batho ba baholo feela, le ka mohla se lumelle bana ba banyenyane hoamper kapa bapala ka yuniti ena.
15. Le ka mohla u se ke ua sebelisa yuniti ena tlas'a maemo a latelang:
    • Libakeng tse tlas'a mongobo o feteletseng
    • Libakeng tse tlas'a ho sisinyeha ho feteletseng kapa maqhubu
    • Sebakeng se nang le mocheso o fetang 45°C/113°F kapa ka tlase ho 20°C/35.6°F

TLHOKOMELO

1. Ha ho na likarolo tse sebelisoang ke mosebelisi kahare, ka kopo u se ke oa bula yuniti.
2. Se ke oa leka ho itokisa, ho etsa joalo ho tla hlakola waranti ea bahlahisi ba hau.
3. Haeba ho ka etsahala hore ebe yuniti ea hau e ka hloka litšebeletso ka kopo ikopanye le morekisi ea haufi le uena.

MOLAOLI LE MESEBETSI

Phanele e ka pele

Panele e ka morao

DC INPUT MIDI ON OFF DC 12V 20V THRU OUT IN 500 mA min DMX OUT AUDIO REMOTE FOG MACHINE 1=Ground 2=Data3=Data+ 1=Ground 2=Data+3=Data- DMX polarity khetha LINE IN 100mV 1/pV 1stereo jack E Felletse ka Stand By kapa Black Out GND 4 35 36 37 38 39 40 41 42/1 jack ea stereo.

MAHLOMOLA

Lenaneo

Rekota lumella

1. Tobetsa 'me u hatelle konopo ea Record.
2. Ha u ntse u tšoere konopo ea Record, tlanya likonopo tsa Flash 1,6, 6 le 8 ka tatellano.

TLHALOSO KAKARETSO

Rea leboha ha u rekile lihlahisoa tsa rona hape. Ho ntlafatsa ts'ebetso ea yuniti ena, ka kopo bala litaelo tsena tsa ts'ebetso ka hloko ho tloaelana le lits'ebetso tsa mantlha. Yuniti ena e kile ea lekoa fekthering pele e romelloa ho uena, ha ho na kopano e hlokahalang. Likarolo tsa eona li kenyelletsa:

• 48 likanale tsa taolo tsa DMX
• 96 mananeo a chaser
• 2 Li-cross-fader tse ikemetseng li fihlella ho laola likanale tsohle
• Pontšo ea LCD ea 3 Digit
• Theknoloji ea dijithale e amohetsoe
• Memori ea ho hloleha ha matla
• Likou tse tloaelehileng tsa MIDI le DMX
• E matla ea ho hlophisa lenaneo
• Mefuta e fapaneng ea ho matha
• Mananeo a mang a ka sebetsa ka sync
  Ka kopo, boloka bukana ena sebakeng se sireletsehileng ka mor'a ho bala, e le hore u ka e sheba bakeng sa lintlha tse ling nakong e tlang.

TEMOSO

1. Ho thibela kapa ho fokotsa kotsi ea ts'oaetso ea motlakase kapa mollo, u se ke ua pepesetsa yuniti ena pula kapa mongobo.
2. Ho hlakola memori hangata ho ka baka tshenyo ho chip ya memori, hlokomela hore o se ke wa qala yuniti ya hao hangata ho qoba kotsi ena.
3. Sebelisa feela adaptara ea motlakase ea AC/DC e khothalelitsoeng.
4. Etsa bonnete ba hore u boloka lebokose la ho paka haeba u ka tlameha ho khutlisa yuniti bakeng sa ts'ebeletso.
5. Se ke oa tšela lino tse ling kapa metsi ho kapa ho li fetisetsa ho hau ampmoqhobi.
6. Etsa bonnete ba hore sehokelo sa motlakase sa lehae se ts'oana le vol kapa vol e hlokahalangtage bakeng sa hau ampmoqhobi.
7. Se ke oa leka ho sebelisa yuniti ena haeba thapo ea motlakase e robehile kapa e robehile. Ka kopo tsamaisa thapo ea hau ea motlakase ho tsoa tseleng ea sephethephethe sa maoto.
8. U se ke ua leka ho tlosa kapa ho khaola karolo ea fatše ho tloha thapo ea motlakase. Prong ena e sebelisetsoa ho fokotsa kotsi ea ho tsosoa ke motlakase le mollo haeba ho ka ba le khutso e ka hare.
9. Tlosa motlakase o ka sehloohong pele o etsa mofuta ofe kapa ofe oa khokahanyo.
10. U se ke ua tlosa sekoahelo se ka holimo tlas'a maemo leha e le afe. Ha ho na likarolo tse ka sebelisoang ke basebelisi ka hare.
11. Hlakola matla a mantlha a yuniti ha a tlohetsoe a sa sebelisoe nako e telele.
12. Sesebelisoa sena ha se reretsoe ho sebelisoa lapeng.
13. Lekola karolo ena ka hloko bakeng sa tšenyo e ka bang teng nakong ea sekepe. Haeba yuniti e bonahala eka e senyehile, u se ke ua leka ho sebetsa, ka kopo ikopanye le morekisi oa hau.
14. Sehlopha sena se lokela ho sebetsoa ke batho ba baholo feela, le ka mohla se lumelle bana ba banyenyane hoamper kapa bapala ka yuniti ena.
15. Le ka mohla u se ke ua sebelisa yuniti ena tlas'a maemo a latelang:
    1. Libakeng tse tlas'a mongobo o feteletseng
    2. Libakeng tse tlas'a ho sisinyeha ho feteletseng kapa maqhubu
    3. Sebakeng se nang le mocheso o fetang 450C/1130 F kapa ka tlase ho 20C/35.60 F

TLHOKOMELO

1. Ha ho na likarolo tse sebelisoang ke mosebelisi kahare, ka kopo u se ke oa bula yuniti.
2. Se ke oa leka ho itokisa, ho etsa joalo ho tla hlakola waranti ea hau ea moetsi.
3. Haeba ho ka etsahala hore ebe yuniti ea hau e ka hloka litšebeletso ka kopo ikopanye le morekisi ea haufi le uena.

MOLAOLI LE MESEBETSI

Phanele e ka Pele:

1. PRESET A LEDs -
   Bontša matla a hajoale a mocha o amehang o baloang ho tloha ho 1 ho isa ho 24.
2. Channel Sliders 1-24 -
   Li-slider tsena tse 24 li sebelisoa ho laola le / kapa ho hlophisa matla a likanale 1- 24.
3. Likonopo tsa Flash 1-24 -
   Likonopo tsena tse 24 li sebelisoa ho tlisa mocha ka mong, ka matla a felletseng.
4. PRESET B LEDs -
   Bontša matla a hona joale a mocha o amehang o baloang ho tloha ho 25-48.
5. Li-LED tsa SCENE -
   E bobebe ha liketsahalo tse amehang li le teng.
6. Channel Sliders 25-48 -
   Li-slider tsena tse 24 li sebelisoa ho laola le / kapa ho hlophisa matla a likanale 25- 48.
7. Likonopo tsa Flash 25-48 -
   Likonopo tsena tse 24 li sebelisoa ho tlisa mocha ka mong, ka matla a felletseng. Li boetse li sebelisetsoa ho etsa mananeo.
8. Konopo e LEFIFI -
   Konopo ena e sebelisetsoa ho fokotsa tlhahiso e akaretsang ea nakoana.
9. TLAS'A/OTLA MOTS'EOA. Konopo–
   TLASE e sebetsa ho fetola ketsahalo ka mokhoa oa Edita, BEAT REV. e sebedisoa ho kgutlisetsa morao tsela ya ho lelekisa lenaneo ka ho otla ha kamehla.
10. MODE SEL./REC. SPEED Konopo -
    Tlanya ka 'ngoe e tla kenya tšebetsong mokhoa oa ho sebetsa ka tatellano: CHASE/SCENES, D.(Double) PRESET le S.(Single) PRESET. REC. SPEED: Beha lebelo la leha e le efe ea mananeo a lelekisang ka mokhoa oa Mix.
11. PHAHAMA/CHASE TŠEN. Konopo -
    UP e sebelisoa ho fetola ketsahalo ka mokhoa oa Edita. LELEKANG TŠEN. ke ho fetola tsela ea ho lelekisa sebaka se tlas'a taolo ea Speed ​​​​Slider.
12. Konopo ea LEQEPHE -
    Tlanya ho khetha maqephe a liketsahalo Leqepheng la 1-4.
13. DEL./REV. Konopo e ONE -
    Hlakola mohato ofe kapa ofe oa ketsahalo kapa u fetole tsela ea ho lelekisa lenaneo lefe kapa lefe.
14. Pontšo ea 3 Digit -
    E bonts'a tšebetso ea hajoale kapa boemo ba lenaneo.
15. INSERT / % kapa 0-255 Konopo–
    INSERT ke ho kenya mohato kapa mohato o le mong sebakeng sa ketsahalo. % kapa 0-255 e sebelisetsoa ho fetola potoloho ea boleng pakeng tsa % le 0-255.
16. HLOKA/TSOHLE TŠENOLO. Konopo -
    EDIT e sebelisoa ho kenya mokhoa oa Edita. TSOHLE TŠENOLO. ke ho fetola tsela ea ho lelekisa mananeo ohle.
17. ADD kapa KILL/REC. EXIT Konopo–
    Ho Add mode, li-scene tse ngata kapa likonopo tsa Flash li tla ba teng ka nako e le 'ngoe. Ka Kill mode, ho tobetsa konopo efe kapa efe ea Flash ho tla bolaea litšoantšo kapa mananeo a mang. REC. EXIT e sebelisoa ho tsoa ho Lenaneo kapa Mokhoa oa Edita.
18. RECORD/SHIFT Konopo–
    RECORD e sebelisoa ho kenya mokhoa oa ho rekota kapa ho hlophisa mohato. SHIFT e sebelisoa feela ka likonopo tse ling.
19. MAS. Konopo -
    E tlisa kanale 1-12 ka botlalo ka maemo a hajoale.
20. PARK Konopo -
    E sebelisetsoa ho khetha Single/ Mix Chase, tlisa Channel 13-24 ho tlala boemo ba hona joale, kapa ka nakoana u hlophise setšoantšo ho Master B slider, ho itšetlehile ka mokhoa oa hona joale.
21. HOLD Konopo -
    Konopo ena e sebelisoa ho boloka boemo ba hajoale.
22. STEP Konopo -
    Konopo ena e sebedisetswa ho ya mohatong o latelang ha Speed ​​Slider e sutumelletswa tlase kapa ho Edit mode.
23. AUDIO Konopo -
    E kenya tshebetsong kgokahanyo ya modumo ya ho lelekisa le matshwao a matla a modumo.
24. Master A Slider -
    Slider ena e laola tlhahiso ea likanale tsohle.
25. Master B Slider–
    Slider ena e laola ho lelekisa likanale tsohle.
26. BLIND Konopo -
    Mosebetsi ona o tlosa mocha ho lelekisa lenaneo ka mokhoa oa CHASE/SCENE.
27. Konopo ea HOME -
    Konopo ena e sebelisetsoa ho koala Blind.
28. TŠOANTŠA TŠOANTŠISO. Konopo -
    Ho tobetsa konopo ena khafetsa ho tiisa lebelo la ho lelekisa.
29. Konopo ea HO FELA -
    Tlanya konopo ena e tla tlisa tlhahiso ea kakaretso ka botlalo.
30. Konopo ea BLACK-OUT -
    Konopo ena e sebelisetsoa ho bolaea lihlahisoa tsohle ntle le tse hlahisoang ke Flash le Full On.
31. FADE Slider -
    E sebelisoa ho fetola Nako ea Fade.
32. SPEED Slider -
    Se sebedisoang ho lokisa lebelo la ho lelekisa. Tsamaisa selaete sena ho theosa ho fihlela ponts'o ea LCD ea linomoro tse 3 e baleha hore SHO e tla kena ho Show Mode, moo ketso ea ho lelekisa e tla emisa.
33. AUDIO LEVEL Slider -
    Selaete sena se laola kutlo ea molumo oa molumo.
34. Konopo ya FOGGER -
    Ha hodimo READY LED e bonesa, tobetsa konopo ena ho laola mochini oa moholi o khomaretsoeng bakeng sa moholi.
    Panel e ka morao:
    
35. Phetoho ea Matla -
    Sesebelisoa sena se laola ho bulela kapa ho tima motlakase.
36. Kenyeletso ea DC -
    DC 12-20V, 500mA Bonyane.
37. MIDI Thru./Out/In -
    Li-port tsa MIDI bakeng sa ho hokela sequencer kapa sesebelisoa sa MIDI.
38. DMX Out -
    Sehokelo sena se romella boleng ba hau ba DMX ho sephutheloana sa DMX kapa pakete ea DMX.
39. DMX Polarity Khetha -
    E sebelisetsoa ho khetha polarity ea DMX.
40. Kenyo ea Mantsoe -
    Jack ena e amohela lets'oao la molumo oa molumo ho tloha ho 100Mv ho isa ho 1V pp.
41. Kenyo ya Remote -
    Black Out le Full On e ka laoloa ke remote control e sebelisang jack ea stereo e tloaelehileng ea 1/4".

MAHLOMOLA

Lenaneo

Rekota lumella

1. Tobetsa 'me u hatelle konopo ea Record.
2. Ha u ntse u tšoere konopo ea Record, tlanya likonopo tsa Flash 1, 6, 6 le 8 ka tatellano.
3. Hlakola konopo ea Record, Record LED e bonesa, joale u ka qala ho hlophisa mekhoa ea hau ea ho lelekisa.

HLOKOMELA:
Lekhetlo la pele ha u bulela yuniti ea hau, tlhophiso ea kamehla ea Code Code ke likonopo tsa Flash 1, 6, 6 le 8.
U ka fetola Code Record ho sireletsa mananeo a hau.

Tšireletso bakeng sa Mananeo a Hao
Ho sireletsa mananeo a hau hore a se ke a hlophisoa ke ba bang, o ka fetola Code Code.

1. Kenya Record Code ea hajoale (Likonopo tsa Flash 1, 6, 6 le 8).
2. Tobetsa o hatelle likonopo tsa Record le Edit ka nako.
3. Ha u ntse u tšoere likonopo tsa Record le Edit, tlanya konopo ea Flash eo u e batlang ho kenya Khoutu e ncha ea Rekoto.
   Record Code e na le likonopo tse 4 tsa Flash (konopo e tšoanang kapa likonopo tse fapaneng), etsa bonnete ba hore Code ea hau e ncha e na le likonopo tse 4 tsa Flash.
4. Kenya Khoutu ea hau e ncha ea Rekoto lekhetlo la bobeli, li-LED tsa liteishene tsohle le li-LED tsa liketsahalo li tla benya ka makhetlo a mararo, joale Code Code e fetotsoe.
5. Tsoa ho Rekota mokhoa. Tlanya REC. EXIT konopo ha u ntse u tobetsa le ho tšoara konopo ea Rekota, lokolla likonopo tse peli ka nako e le 'ngoe, mokhoa oa Rekoto o tlosoa.

BOHLOKOA!!!
Kamehla hopola ho tsoa ho Rekota mode ha u sa tsoelepele ho etsa mananeo a hau, ho seng joalo u ka lahleheloa ke taolo ea yuniti ea hau.

HLOKOMELA:
Lekhetlo la bobeli ha u kenya Rekoto ea hau e ncha e fapaneng le ea lekhetlo la pele, li-LED li ke ke tsa khanya, ho bolelang hore u hlotsoe ho fetola Code Code.
Ha o kenya Khoutu e ncha ea Rekoto lekgetlo la pele, ha feela o batla ho hlakola Khoutu e ncha, tobetsa o hatelle likonopo tsa Rekota le ho Tsoa ka nako ho tsoa.

Mananeo Scenes

1. Rekota lumella.
2. Khetha mokhoa oa 1-48 Single ka ho tlanya konopo ea Mode Khetha. Sena se tla u fa taolo ea likanale tsohle tse 48 ha u ntse u hlophisa.
   Etsa bonnete ba hore Master A & B ka bobeli li behiloe ka bongata. (Master A o maemong a holimo ha a behiloe holimo, ha Master B a le holimo ha a behiloe ho theosa kaofela.)
3. Theha ketsahalo e lakatsehang u sebelisa Channel Slider 1-48. Ho 0% kapa DMX 255, li-slider tsena li lokela ho ba maemong a 10.
4. Hang ha ketsahalo e khotsofetse, tlanya konopo ea Record ho hlophisa ketsahalo e le mohato oa mohopolo.
5. Pheta mohato oa 3 le oa 4 ho fihlela mehato eohle e lakatsehang e kentsoe mohopolong. U ka hlophisa mehato e fihlang ho 1000 mohopolong.
6. Khetha banka ea chase kapa scene bang bang bang ho boloka lenaneo la hao. Tlanya konopo ea Leqephe khetha leqephe (Leqephe 1-4) ho boloka liketsahalo tsa hau.
7. Tobetsa konopo ea Flash pakeng tsa 25-48 ha u ntse u tšoere konopo ea Record. Li-LED tsohle li tla benya ho bonts'a hore lits'oants'o li hlophisitsoe mohopolong.
8. U ka tsoela pele ho etsa mananeo kapa ua tsoa. Ho tsoa ho Mokhoa oa Lenaneo, tlanya konopo ea Tsoa ha u ntse u tšoere Record LED e lokela ho tima.

EXAMPLE: Etsa mehato e 16 ho lelekisa mocha 1-32 ka tatellano e felletseng 'me u fane ka konopo ea Flash ea 25 leqepheng la 1.

1. Rekota lumella.
2. Sututsa Master A & B maemong a holimo 'me Fade slider holimo.
3. Tlanya konopo ea Mode Select ho khetha 1-48 Single mode.
4. Sututsa Channel slider 1 ho ea sebakeng se holimo, lebone la eona la LED ka matla a felletseng.
5. Tlanya konopo ea Record ho hlophisa mohato ona mohopolong.
6. Pheta mehato ea 4 le ea 5 ho fihlela u kentse li-slider tsa Channel 1-32.
7. Tlanya konopo ea Leqephe e bakang mabone a LED Leqepheng la 1.
8. Tlanya konopo ea Flash 25 ha u ntse u tšoere konopo ea Rekota, li-LED tsohle li tla khanya ho bonts'a hore u hlophisitse ho lelekisa mohopolong.

Ho lokisa

Edita Noble

1. Rekota lumella.
2. Sebelisa konopo ea Leqephe ho khetha leqephe leo lenaneo leo u lakatsang ho le hlophisa le leng ho lona.
3. Tlanya konopo ea Mode Select ho khetha CHASE LIEKETSENG.
4. Tobetsa o hatelle konopo ea Edita.
5. Ha u ntse u tšoere konopo ea Edita, tlanya konopo ea Flash e tsamaellanang le lenaneo leo u lakatsang ho le hlophisa.
6. Lokolla konopo ea Edita, sebaka se loketseng sa LED se lokela ho khantša se bontšang hore u mokhoeng oa Edita.

Hlakola Lenaneo 

1. Rekota lumella.
2. Sebelisa konopo ea Leqephe ho khetha leqephe leo lenaneo leo u lakatsang ho le hlakola le leng ho lona.
3. Ha u ntse u tšoere konopo ea Edita, tlanya konopo ea Flash (25-48) habeli.
4. Lokolla likonopo tse peli, li-LED tsohle li benya, tse bontšang hore lenaneo le hlakotsoe.

Hlakola Mananeo Ohle

1. Tobetsa 'me u tšoare konopo ea Record.
2. Tlanya likonopo tsa Flash 1, 4, 2 le 3 ka tatellano ha u ntse u tšoere konopo ea Record. Li-LED tsohle li tla khanya, ho bontša hore mananeo ohle a bolokiloeng mohopolong a hlakotsoe.

Hlakola Sebaka kapa Sebaka

1. Rekota lumella.
2. Rekota ketsahalo kapa liketsahalo.
3. Haeba u sa khotsofala ke ketsahalo kapa liketsahalo, u ka tlanya Rec. Hlakola konopo ha u ntse u tobetsa le ho tšoara konopo ea Record, li-LED tsohle li tla khanya, ho bontša hore liketsahalo li hlakotsoe.

Hlakola Mohato kapa Mehato

1. Rekota lumella.
2. Tlanya konopo ea Mohato ho tsamaisetsa mohatong oo u lakatsang ho o hlakola.
3. Tlanya konopo ea "Delete" ha u fihla mohatong oo u lakatsang ho o hlakola, li-LED tsohle li tla benya ka bokhuts'oane ho bonts'a ho hlakoloa ha mohato.
4. Tsoela pele mehato ea 2 le ea 3 ho fihlela mehato eohle e sa batleheng e hlakotsoe.
5. Tlanya Rec. Konopo ea ho tsoa ha u ntse u tobetsa le ho tšoara konopo ea Record, Scene LED ea tsoa, ​​​​e bontšang ho tsoa ha mokhoa oa Edit.

EXAMPLE: Hlakola mohato oa boraro oa lenaneo ho Flash konopo 3 leqepheng la 25

1. Rekota lumella.
2. Tlanya konopo ea Mode Khetha ho khetha CHNS Boemo ba SCENE.
3. Tlanya konopo ea Leqephe ho fihlela Leqephe la 2 le khantša mabone a LED.
4. Tlanya konopo ea Flash 25 ha u ntse u tobetsa le ho theosa konopo ea Edita, mabone a Scene LED.
5. Tlanya konopo ea Mohato ho tsamaisetsa mohatong oa boraro.
6. Tlanya konopo ea Tlosa ho hlakola mohato.
7. Tlanya Rec. Tsoa konopo ha u ntse u tobetsa le ho tšoara konopo ea Rekota ho tsoa ho Edit mode.

Kenya Mohato kapa Mehato

1. Rekota ketsahalo kapa liketsahalo tseo u lakatsang ho li kenya.
2. Etsa bonnete ba hore u kene 'me u CHASE SCENE Kenya mokhoa oa Edita.
3. Tlanya konopo ea Mohato ho tsamaisetsa mohatong oo u lakatsang ho o kenya pele.
   U ka bala mohato ho tsoa ho Segment Display.
4. Tlanya konopo ea Insert ho kenya mohato oo u o entseng, li-LED kaofela li tla benya, ho bontša hore mohato o kentsoe.
5. Tsoa ho Edita mode.

EXAMPLE: Kenya mohato ka likanale 1-12 ka botlalo ka nako e pakeng tsa mohato oa 4 le oa 5 oa lenaneo la 35.

1. Rekota lumella.
2. Push Channel slider 1-12 holimo 'me u tlalehe ketsahalo e le mohato.
3. Tlanya konopo ea Mode Khetha ho khetha CHNS Boemo ba SCENE.
4. Tlanya konopo ea Leqephe ho fihlela Leqephe la 2 le khantša mabone a LED.
5. Tlanya konopo ea Flash 35 ha u ntse u tšoere konopo ea Edita, sebaka se tsamaisanang le mabone a LED.
6. Tlanya konopo ea Mohato ho ea mohatong oa 4.
7. Tlanya konopo ea Insert ho kenya ketsahalo eo u e entseng pele.

Fetola Mohato kapa Mehato

1. Kenya mokhoa oa Edita.
2. Tlanya konopo ea Mohato ho tsamaisetsa mohatong oo u lakatsang ho o fetola.
3. Tobetsa 'me u tšoare konopo ea Holimo haeba u batla ho phahamisa matla. Haeba o batla ho theola matla, tobetsa o hatelle konopo ea Down.
4. Ha u ntse u tšoere konopo ea Holimo kapa Tlase, tlanya konopo ea Flash e tsamaellanang le kanale ea DMX ea ketsahalo eo u lakatsang ho e fetola ho fihlela u fihla ho boleng bo baloang ho tsoa ho Segment Display. Ebe o ka tlanya likonopo tsa Flash ho fihlela o khotsofetse ke ketsahalo e ncha.
5. Pheta mehato ea 2, 3 le 4 ho fihlela mehato eohle e fetotsoe.
6. Tsoa ho Edita mode.

Ho matha

Ho matha Mananeo a Chase

1. Tlanya konopo ea Mode Khetha ho khetha CHNS Boemo ba SCENES bo bonts'itsoeng ke LED e khubelu.
2. Tlanya konopo ea Leqephe ho khetha leqephe le nepahetseng leo lenaneo leo u lakatsang ho le sebelisa le fumaneha.
3. Sututsa Master Slider B ho ea maemong a eona a holimo (ka tlase ka botlalo).
4. Tsamaisa selaete se lakatsehang sa Channel (25-48) sebakeng sa sona se phahameng ho qala lenaneo, 'me lenaneo le tla nyamela ho latela nako ea hona joale ea ho fela.
5. Tsamaisa selaete sa Channel ho lokisa tlhahiso ea lenaneo la hajoale.

Ho tsamaisa Lenaneo ho Audio

1. Sebelisa maekerofounu e hahelletsoeng ka hare kapa hokella mohloli oa molumo ka har'a jeko ea RCA Audio.
2. Khetha lenaneo la hau joalo ka ha ho hlalositsoe ka holimo.
3. Tobetsa konopo ea Audio ho fihlela mabone a eona a LED, a bonts'a hore Audio mode e sebetsa.
4. Sebelisa selaete sa boemo ba molumo ho lokisa kutloisiso ea 'mino.
5. Ho khutlela mokhoeng o tloaelehileng, tlanya konopo ea Audio khetlo la bobeli e etsa hore LED ea eona e tsoe, mokhoa oa Audio o khaotsoe.

Ho tsamaisa Mananeo ka Speed ​​​​Slider

1. Etsa bonnete ba hore mokhoa oa Audio ha o sebetse, ke hore Audio LED ea tima.
2. Khetha lenaneo la hau joalo ka ha ho hlalositsoe ka holimo.
3. Tsamaisa Speed ​​slider sebakeng sa SHOW MODE (konopo), ebe u tlanya konopo ea Flash (25-48) ha u ntse u tobetsa le ho tšoara Rec. Konopo ea lebelo, lenaneo le tsamaellanang le ke ke la hlola le sebetsa ka ho otla ha Standard.
4. Joale o ka tsamaisa Speed ​​Slider ho khetha lebelo leo u le batlang.

HLOKOMELA:
Mohato oa 3 ha o hlokahale haeba lenaneo le khethiloeng le sa tlalehoa ka Standard Beat.

Ho tsamaisa Mananeo ka Beat e Tloaelehileng

1. Netefatsa hore Audio mode ha e sebetse. Tlanya konopo ea Mode Select ho khetha CHASE Boemo ba SCENE.
2. Tlanya konopo ea Park ho khetha mokhoa oa Mix Chase, mabone a LED a bontšang khetho ena.
3. Khetha lenaneo la hau joalo ka ha ho hlalositsoe ka holimo.
4. Tsamaisa Speed ​​​​slider ho fihlela Segment Display e bala boleng boo u bo batlang. U ka tlanya konopo ea Tlanya Sync habeli ho hlalosa nako ea ho otla ha hao.
5. Ha u ntse u tobetsa le ho tšoara Rec. Konopo ea lebelo, tlanya konopo ea Flash(25-48) e bolokang lenaneo.
6. Joale lenaneo le tla sebetsa ka nako e behiloeng kapa ho otla ha ho etsoa.
7. Pheta mehato ea 4 le ea 5 ho beha nako e ncha ea ho otla.

Fetola Mokhoa oa Lebelo lipakeng tsa Metsotso e 5 le Metsotso e 10

1. Tobetsa 'me u tšoare konopo ea Record.
2. Tlanya konopo ea Flash 5 kapa 10 makhetlo a mararo ha u ntse u tšoere konopo ea Rekota.
3. 5 MIN kapa 10 MIN e lokela ho bonesa ho bontsha hore Speed ​​slider e behilwe ho sebetsa ka metsotso e 5 kapa 10.

MIDI

Ho beha MIDI IN

1. Tlanya konopo ea Flash 1 ka makhetlo a mararo ha u ntse u tšoere konopo ea Rekota, Pontšo ea Karolo e baleha "CHI" e bontšang hore MIDI IN seteishene sa seteishene se fumaneha.
2. Tlanya konopo ea Flash e nang le linomoro ho tloha ho 1-16 ho abela MIDI IN Channel 1-16, mocha o loketseng oa mabone a LED a bonts'ang mocha oa MIDI IN o setiloe.

Ho beha MIDI OUT

1. Tlanya konopo ea Flash 2 ka makhetlo a mararo ha u ntse u tšoere konopo ea Rekota, Pontšo ea Karolo e baleha "CHO" e bonts'ang hore MIDI IN tlhophiso ea mocha e fumaneha.
2. Tlanya konopo ea Flash e nang le linomoro ho tloha ho 1-16 ho abela MIDI OUT Channel 1- 16, mabone a LED a mabone a bonts'ang mocha oa MIDI OUT a setiloe.

Tloha ho Setting ea MIDI
Tobetsa 'me u hatelle konopo ea Record. Ha u ntse u tšoere konopo ea Record, tlanya Rec. Konopo ea ho tsoa ho tsoa ho tlhophiso ea MIDI.

Ho amohela MIDI File Lahla
Tobetsa konopo ea Flash 3 ka makhetlo a mararo ha u ntse u tšoere konopo ea Rekota, Sebopeho sa Karolo se baleha "IN" se bontšang hore molaoli o se a loketse ho amohela MIDI. file lahla.

Ho romela MIDI File Lahla
Tlanya konopo ea Flash 4 ka makhetlo a mararo ha u ntse u tšoere konopo ea Record, Segment Display e baleha "OUT" e bontšang hore molaoli o se a loketse ho romela file.

HLOKOMELA:
Nakong file lahla, lits'ebetso tse ling kaofela li ke ke tsa sebetsa. Mesebetsi e tla khutla ka bo eona ha e file thotobolo e phethiloe. File thotobolo e tla sitisoa ebe e emisa haeba ho hlaha liphoso kapa ho tima motlakase.

Phethahatso

1. Nakong ea ho amohela le ho romella data ea MIDI, lits'oants'o tsohle tsa MIDI le liteishene tse ntseng li tsamaisoa li tla ema ha ho se karabo nakong ea metsotso e 10.
2. Nakong ea ho amohela le ho romela file lahla, molaoli o tla batla kapa a romelle ID ea sesebelisoa ea 55h(85), a file e bitsoang DC2448 le katoloso ea "BIN(SPACE)".
3. File dump e lumella molaoli enoa ho romella data ea eona ea MIDI yuniti e latelang kapa lisebelisoa tse ling tsa MIDI.
4. Ho na le mefuta e 'meli ea file mokhoa oa ho lahla o hlalositsoeng ka tlase:
5. Molaoli o tla romela le ho amohela lintlha tsa Note On Off ka likonopo tsa Flash.

KHUTS'OA MESEBETSI

Khutlisetsa lehlakoreng la sebaka

1. Khutlisetsa lehlakoreng la liketsahalo tsohle. Tobetsa Konopo ALL REV, lits'oants'o tsohle li lokela ho fetola litsela tsa tsona.
2. Fetola tsela ea ho lelekisa mananeo ohle ka taolo ea lebelo: Tobetsa Konopo ea Chase Rev.
3. Khutlisetsa morao tsela ea ho lelekisa mananeo ohle ka ho otla ho tloaelehileng: Tobetsa Konopo ea Beat Rev.
4. Tsela ea ho lelekisa morao ea lenaneo leha e le lefe: Tobetsa 'me u hatelle Rec.
   Konopo e le 'ngoe, ebe o tobetsa konopo ea Flash e tsamaellanang le lenaneo leo u le batlang 'me u lokolle hammoho.

Felisa nako

1. Nako eo e tla nka hore dimmer e tsamaee ho tloha ho zero ho ea ho palo e kholo ea tlhahiso, le verse verse.
2. Nako ea Fade e fetoloa ka Fade Time Slider, e fapaneng ho tloha ho hang ho isa ho metsotso e 10.

Tlanya Konopo ea Khokahano

1. Konopo ea Tap Sync e sebelisoa ho seta le ho hokahanya sekhahla sa ho lelekisa (sekhahla seo liketsahalo tsohle li tla latellana) ka ho tlanya konopo makhetlo a 'maloa. Sekhahla sa ho lelekisa se tla lumellana le nako ea lipompo tse peli tsa ho qetela. LED e kaholimo ho Button ea Mohato e tla khanya ka sekhahla se secha sa ho lelekisa. Sekhahla sa ho lelekisa se ka beoa neng kapa neng hore na lenaneo le ntse le sebetsa kapa che.
2. Tlanya Sync e tla hlakola litlhophiso life kapa life tsa nakong e fetileng tsa taolo ea lebelo ho fihlela selaete se suthisoa hape.
3. Tšebeliso ea Tap Sync ha u seta morethetho o tloaelehileng hoa tšoana le ka selaete sa taolo ea lebelo.

Master Slider
Taolo ea Master Slider e fana ka taolo ea tekanyo ea boemo holim'a likanale le liketsahalo tsohle ntle le Likonopo tsa Flash. Bakeng sa mohlalaampLe:
Neng kapa neng ha taolo ea Master slider bonyane e le stagLiphetho tsa e li tla ba ho zero ntle le tse hlahang ho Konopo ea Flash kapa Konopo E FULL ON.
Haeba Master a le ho 50%, liphetho tsohle li tla ba ho 50% feela ea tlhophiso ea kanale ea hajoale kapa lipono ntle le tse hlahang ho Konopo ea Flash kapa Konopo E FULL ON.
Haeba Master e felletse, liphetho tsohle li tla latela tlhophiso ea yuniti.
Master A kamehla o laola tlhahiso ea likanale. Lenaneo la Master B le laolang kapa ketsahalo ntle le ho Mode oa Tobetsa Habeli.

Mokhoa o le Mong

1. Mananeo ohle a tla sebetsa ka tatellano ho qala ka tatellano ea nomoro ea lenaneo.
2. Pontšo ea LCD ea linomoro tse 3 e tla bala nomoro ea lenaneo le sebetsang.
3. Mananeo ohle a tla laoloa ke Speed ​​​​Slider e tšoanang.
4. Tobetsa MODE SEL. Konopo ebe u khetha "CHASELITŠOANTŠISO”.
5. Tobetsa Konopo ea PARK ho khetha SINGLE CHASE MODE. LED e khubelu e tla bontša khetho ena.

Kopanya Mokhoa

1. E tla tsamaisa mananeo ohle ka tsela e lumellanang.
2. Mananeo ohle a ka laoloa ke SLIDER SPEED e tšoanang, kapa lebelo le leng le le leng la lenaneo le ka laoloa ka bonngoe. (Sheba Setlhophiso sa Lebelo).
3. Tobetsa MODE SEL. Konopo ebe u khetha "CHASELITŠOANTŠISO”.
4. Tobetsa Konopo ea PARK ho khetha MIX CHASE MODE. LED e mosehla e tla bontša khetho ena.

Pontšo ea Dimmer

1. Pontšo ea 3-Digit LCD e sebelisoa ho bonts'a matla a liperesentetage kapa boleng ba absoluteDMX.
2. Ho fetoha lipakeng tsa liperesentetage le boleng bo felletseng: Tobetsa 'me u tšoare ShiftButton. Ha u ntse u tšoere konopo ea Shift tobetsa Konopo ea 5 kapa 0-255 ho switjha lipakeng tsa liperesentetage le litekanyetso tse felletseng.
3. Haeba Segment Display e bala, mohlalaample, “076”, e bolela peresentetaglekanya 76%. Haeba Segment Display e baleha "076", e bolela boleng ba DMX76.

Sefofu le Lehae

1. Blind tshebetso e nka likanale ka nakoana ho tsoa ho lelekisa, ha chaseis e matha, 'me e u fa taolo ea letsoho holim'a mocha.
2. Tobetsa 'me u tšoare Konopo ea Blind ebe u tlanya Konopo ea Flash eo u batlang ho e ntša ka nakoana.
3. Ho khutlela ho lelekisa le tloaelehileng hape, tobetsa 'me u tšoare Konopo ea Lehae ebe u tobetsa Konopo ea Flash eo u batlang ho khutlela ho eona e tloaelehileng.

LIEKETSENG MOKHOPO

• Kenyeletso ya Matla ……………………………………… DC 12~18V 500mA Min.
• DMX Out ………………………………………… 3 pin male XLR socket x 1
• MIDI In/Out/Thru………………………………………… 5 pin multiple socket
• Litekanyo …………………………………………..……….. 710x266x90mm
• Boima ……………………………………………………………… 6.3 Kgs

Litokomane / Lisebelisoa

FOS theknoloji Fader Desk 48 Console [pdf] Bukana ea Mosebelisi Fader Desk 48, Fader Desk 48 Console, Console

Litšupiso

• Bukana ea Mosebelisi