ElectricBikes LCD e bonts'a SWM5 Display LCD Screen
Mekhahlelo ea Kantle
Casing Material: ABS
Bontša Boitsebiso: High Hardness Acrylic (boleng ba boima bo tšoanang le ba khalase e futhumetseng).
Tshebetso Voltage le Lihokelo
- Tshebetso Voltage: DC24V / 36V E Tsamaellana, 36/48V E lumellana (e behiloeng ke pontšo). Karolo e 'ngoe ea ts'ebetsotage ka etsoa ka mokhoa o ikhethileng.
- Lihokelo:
Mofuta oa Sehokelo se Tloaelehileng
Tokisetso ea Sehokelo se Tloaelehileng
| Tatelano No. | Mobala oa Mohala | Mesebetsi |
| 1 | Khubelu (VCC) | Hlahisa Cable ea Matla |
| 2 | Boputsoa (K) | Taolo ea Matla a On/Off Cable |
| 3 | Ntsho (GND) | Hlahisa Cable ea fatše |
| 4 | Botala (RX) | Hlahisa Data Receiving Wire |
| 5 | Bosehla (TX) | Hlahisa Data Sending Wire |
Mesebetsi e Atolositsoeng
- Leseli: Brown (DD): Electrode e ntle ea leseli
- White (GND): Electrode e fosahetseng ea leseli.
Litlhaloso tsa mebala ea terata ea PWM Voltage Motor Power Controller le sensor e ikemetseng ea lebelo e tla hlalosoa ka tsela e fapaneng.
Hlokomela: Lihlahisoa tse ling li sebelisa li-connectors tse sa keneleng metsi, tseo litokisetso tsa tsona tsa ka hare tsa mohala li ke keng tsa tsejoa ho tsoa ka ntle.
Mesebetsi
Pontšo
- Pontšo ea Lebelo la PAS Pontšo ea Boemo ba Betri
- Pontsho ea Phoso Total Mileage Single Mileage
- Leseli Pontšo Nako e le 'Ngoe ea Leeto
Laola le Litlhophiso
- Power Switch Front Light Control 6km/h Cruise Control
- Nako ea 'nete ea Cruise Control Wheel Diameter Setting Top Speed Setting
- Sleep Interval Setting Backlight Brightness Setting Voltage Boemo ba Boemo
Protocol ea Lipuisano: UART
Lintlha tsa Pontšo
- Leseli
- Boemo ba Betri
- Pontšo ea Mesebetsi e Mengata
- Kakaretso ea Mileage: ODO
- Mileage e le 'Ngoe: LEETO
- Khouto ea Phoso: Phoso
- Matla: WATT
- Tlhokomelo: Boloka
- DST HO YA: Ha e hlalosehe
Tokiso ea lisebelisoa tsa motlakase oa koloi
Li-gear tsa 0-9 tse feto-fetohang; Hangata ho na le 3 mode, 5 mode, 9 mode optional (Karolo ea 6km cart gear display P)- Mokhoa oa Koloi
- ECO: Mokhoa oa Moruo
- STD: Mokhoa o tloaelehileng
- MATLA: Mokhoa o Matlafalitsoeng
- SPEEDHANDLE: Mokhoa oa lebelo o laoloang ka letsoho
- TSAMAEA: Mokhoa oa ho Tsamaea oa Boost
- Pontsho ya Lebelo
- Lebelo la Hona Joale: CUR
- Lebelo le Leholo: MAX
- Karolelano ea lebelo: AVG
- Tekanyo: MPH kapa KM/H
Pontšo e tla bala lebelo la 'nete la ho tsamaea ho ipapisitse le bophara ba lebili le data ea matšoao (palo ea tšepe ea makenete ea hlokahala bakeng sa li-motors tsa Hall).
Boemo ba Koloi PHOSO
Khoutu ea Phoso le MatšoaoKhouto ea Phoso (decimal) Lipontšo Hlokomela 0 Tloaelehileng 1 Reserved 2 Brake 3 PAS Sensor Failure (letšoao la ho palama) Ha e Lemohe 4 6km/h Cruise 5 Cruise ea Nako ea 'Nete 6 Betri e tlase 7 Ho hloleha ha makoloi 8 Ho hloleha ha Throttle 9 Ho hloleha ho Laola 10 Ho Hlōleha ho Fumana Lipuisano 11 Ho hloleha ho Romela Lipuisano 12 Ho hloleha ha Lipuisano tsa BMS 13 Ho hloleha ha Lesedi - Litlhophiso
- P01: Khanya ea Backlight (1: lefifi ka ho fetisisa; 3: e khanyang ka ho fetisisa)
- P02: Mileage Unit (0: KM; 1: MILE)
- P03: Pultage Sehlopha sa 24V / 36V / 48V
- P04: Nako ea ho Robala
(0: ha ho mohla, boleng bo bong bo bolela nako ea ho robala) Yuniti: motsotso - P05: Lisebelisoa tsa ho Thusa Matla
0/3 Mokhoa oa Gear: Gear 1: 2V Gear 2: 3V Gear 3: 4V
1/5 Gear Mode: Gear 1: 2V Gear 2: 2.5V Gear 3: 4V Gear 4: 3.5V Gear 5: 4V - P06: Yuniti ea bophara ba Wheel: inch Precision: 0.1
- P07: Nomoro ea Magnet Steel (bakeng sa Teko ea Lebelo) Range: 1-100
- P08: Lebelo la Lebelo
Range: 0-50km/h, parameter 50 e bontša hore ha ho na moeli oa lebelo.
1. Boemo boo e seng ba likhokahanyo (bo laoloang ke phanele)
Ha lebelo la hona joale le feta moeli oa lebelo, tlhahiso ea PWM e tla koaloa; ha lebelo la hona joale le theoha ho feta moeli oa lebelo, tlhahiso ea PWM e tla sebelisoa 'me lebelo la ho khanna le tla behoa e le lebelo la hona joale ± 1km / h (e sebetsa feela ho thusa lebelo la matla, le sa sebetseng ho lebelo la handlebar).
2. Boemo ba puisano (bo laoloa ke molaoli)
Lebelo la ho khanna le tla bolokoa kamehla e le boleng bo fokolang.
Boleng ba Phoso: ± 1km/h (e sebetsa ho matla a ho thusa ka bobeli / lebelo la letsoho la letsoho)
Hlokomela: Lintlha tse boletsoeng ka holimo li lekantsoe ka metric unit (lik'hilomithara).
Ha tekanyo ea ho metha e fetisetsoa ho yuniti ea moemphera (maele), boleng ba lebelo bo bontšitsoeng phaneleng bo tla fetoloa ka bohona ho ea ho yuniti e tsamaellanang ea moemphera, leha ho le joalo, lebelo la moeli oa khokahanyo e ke ke ea fetoha ka nepo. - P09: Direct Start / Kick-to-Start Setting
0: Qala ka ho Otloloha
1: Raha-ho-Qala - P10: Drive Mode Setting
0: Thuso ea Matla - Lisebelisoa tse khethehileng tsa koloi ea ho thusa li etsa qeto ea boleng ba matla a thusang. Boemong bona, handlebar ha e sebetse.
1: Ho khanna Motlakase - Koloi e khannoa ke handlebar. Boemong bona, lisebelisoa tsa motlakase ha li sebetse.
2: Thuso ea Matla + Motlakase oa Motlakase - Motlakase oa motlakase ha o sebetse boemong ba ho qala ka zero. - P11: Matla a Thusa a Sensitivity Range: 1-24
- P12: Power Assist Starting Intensity Range: 0-5
- P13: Nomoro ea Tšepe ea Magnet ea Matla 5 / 8 / 12pcs
- P14: Boleng ba Moedi wa Hona Jwale: 12A ka ho sa feleng; Sebaka: 1-20A
- P15: Ha e hlalosoe
- P16: ODO Zero-Out
Tobetsa konopo ea holimo nako e telele bakeng sa metsotsoana e 5 mme boleng ba ODO bo tla hlakoloa.
Ts'ebetso
Tlhophiso ea Linotlolo
Kenyelletso ea Linotlolo
Ts'ebetso ea linotlolo e kenyelletsa ho tobetsa hakhutšoanyane, ho tobetsa nako e telele le ho tobetsa nako e telele ea linotlolo tsa motsoako.
Khatiso e khuts'oane e sebelisoa bakeng sa ts'ebetso e khutšoane / khafetsa joalo ka:
Tobetsa nako e telele konopo e le 'ngoe e sebelisetsoa ho fetola boemo ba ho bulela/ho tima.
Tobetsa nako e telele holim'a linotlolo tsa motsoako ho beha liparamente, tse ka qobang ho se sebetse hantle (tobetsa-khutšoane holim'a linotlolo tsa motsoako o koetsoe ho qoba tšebeliso e mpe).
Litaelo tsa Linotlolo
Fetola boemo ba PAS / Throttle
Ka mokhoa oa PAS
a. Tobetsa e khutšoanyane 
, PAS +1.
b. Tobetsa e khutšoanyane 
, PAS -1.
Fetola Pontšo ea Lebelo
Tobetsa nako e telele 
+ ho fetola mofuta wa pontsho ya lebelo.
Numella / Thibela mokhoa oa ho phahamisa maoto oa 6km/h, seta leeto la sekepe la nako ea nnete 'me u bone / tima mabone.
Ha koloi e eme, tobetsa nako e telele ho kena 6km/h walk boost mode. Ha koloi e tsamaea, tobetsa nako e telele ho kena ka nako ea sebele ea ho tsamaea ka sekepe.
Tobetsa nako e telele ho tsoa tseleng ea ho tsamaea ha koloi e le mokhoeng oa cruise 7.
Tobetsa nako e telele ho bonesa/ho tima mabone.
Tlosa / tima LCD Panel
Ha ponts'o e sebetsa, tobetsa nako e telele mme e tla tingwa, ho seng jwalo e tla bulelwa.
Fetolela Lingoliloeng Tse Bontšitsoeng Karolong ea Mesebetsi e Mengata
Tobetsa e khutšoanyane ho chencha ho bala ho bontšitsoeng karolong ea multifunction.
Beha li-Parameters
Tobetsa nako e telele + ho kenya sebopeho sa ho seta.
Li-parameter tseo u ka li khethang li kenyelletsa:
Bophara ba Wheel (yuniti: inch);
Nomoro ea Tšepe ea Magnetic;
Khanya ea Backlight;
Moqolo o tlasetage Threshold (sheba ho beha P01-P14)
Sebopehong sa ho seta, tobetsa hakhutšoanyane or ho fetola boleng ba holimo / tlase ho parameter, e tla panya ka mor'a hore e fetoloe. Ka mor'a ho khetha parameter e lokelang ho hlophisoa,
- Tobetsa nako e telele ho boloka boleng ba hona joale, 'me parameter e tla emisa ho panya;
- Tobetsa e khutšoanyane ho fetohela ho parameter e latelang mme boleng bo behiloeng pele bo tla bolokoa ka nako e le 'ngoe.
Tobetsa + ho tsoa ho seta le ho boloka liparamente.
Ntle le ts'ebetso ena, sistimi e tla tsoa ka bo eona ebe e boloka liparamente tse fetotsoeng kamora metsotsoana e 10.
Hlokomela: Ka lebaka la ntlafatso ea sehlahisoa, sehlahisoa seo u se rekileng se kanna sa fapana hanyane le litlhaloso tse bukeng ena ea mosebelisi, 'me sena se ke ke sa ama tšebeliso e tloaelehileng.
Litokomane / Lisebelisoa
 |
ElectricBikes LCD e bonts'a SWM5 Display LCD Screen [pdf] Bukana ea Mosebelisi LCD ponts'o SWM5 Display LCD Screen, LCD ponts'o SWM5, Display LCD Screen, LCD Screen |