ElectricBikes LCD display SWM5 Display LCD Screen

Paramadairean taobh a-muigh

Stuth còmhdach: ABS
Stuth taisbeanaidh: Acrylic cruas àrd (an aon luach cruas ri glainne tempered).

Vol Obrachaidhtage agus Ceanglaichean

1. Vol Obrachaidhtage: DC24V / 36V Compatible, 36/48V Compatible (set by the display). Other operating voltage faodar a ghnàthachadh.
2. Luchd-ceangail:
   Standard Connector Type

Ullachadh ceangail àbhaisteach

Sreath Àir.	Dath uèir	Gnìomhan
1	Dearg （VCC）	Càball cumhachd taisbeanaidh
2	Gorm（K）	Controller Power On/Off Cable
3	Dubh（GND）	Càball talmhainn taisbeanaidh
4	Uaine （RX）	Wire Glacadh Dàta Taisbeanaidh
5	Buidhe （TX）	Uèir cuir dàta taisbeanaidh

Gnìomhan Leudaichte

• Light: Brown (DD): The positive electrode of the light
• White (GND): The negative electrode of the light.

The wire color definitions of the PWM Voltage Motor Power Controller and the independent speed sensor will be defined otherwise.
Thoir an aire: Some products use waterproof connectors, whose internal wire arrangements cannot be identified from the exterior.

Gnìomhan

Taisbeanadh

• Speed Display                 PAS Level Display                Battery Level Display
• Error Indication             Total Mileage                       Single Mileage
• Light Indication              Single Trip Time

Smachd agus Roghainnean

• Power Switch                                               Front Light Control                6km/h Cruise Control
• Real-time Cruise Control                           Wheel Diameter Setting             Top Speed Setting
• Sleep Interval Setting                               Backlight Brightness Setting      Voltage suidheachadh ìre

Pròtacal Conaltraidh: UART

Mion-fhiosrachadh taisbeanaidh

1. Solas
2. Ìre Bataraidh
3. Taisbeanadh ioma-ghnìomhan
   • Mìlead iomlan: ODO
   • Singilte Mìle: TRIP
   • Error Code: Error
   • Power: WATT
   • Maintenance: Maintain
   • DST TO GO: Unspecified
4. Atharrachadh gèar cumhachd carbaid
   Adjustable 0-9 gears; There are usually 3 mode, 5 mode, 9 mode optional (Part version 6km cart gear display P)
5. Modh Carbaid
   • ECO: Economical Mode
   • STD: Standard Mode
   • POWER: Intensified Mode
   • SPEEDHANDLE: Handle-controlled Speed Mode
   • WALK: Walk Boost Mode
6. Taisbeanadh luaths
   • Current Speed: CUR
   • Astar as àirde: MAX
   • Astar cuibheasach: AVG
   • Aonad tomhais: MPH no KM/H
     The display will calculate the actual travelling speed based on the wheel diameter and signal data (number of magnetic steel is needed for Hall motors).
7. Inbhe carbaid MEARACHD
   Còd mearachd agus comharraidhean

   Còd na mearachd (deicheach)	Comharraidhean	Thoir an aire
   0	àbhaisteach
   1	Glèidhte
   2	Breic
   3	Fàilligeadh mothachaidh PAS (comharra marcachd)	Cha deach a thoirt gu buil
   4	Cuairt-mara 6km/h
   5	Cuairt-mara Fìor-ùine
   6	Bataraidh ìosal
   7	Fàilligeadh motair
   8	Fàilligeadh Throttle
   9	Teip rianadair
   10	Conaltradh a' faighinn fàilligeadh
   11	Conaltradh a 'cur fàilligeadh
   12	Fàilligeadh conaltraidh BMS
   13	Fàilligeadh aotrom

8. Suidhichidhean
   1. P01: Gile solais cùil (1: as dorcha; 3: as soilleire)
   2. P02: Aonad Mìle Bliadhna (0: KM; 1: MILE)
   3. P03: Voltage Class 24V / 36V / 48V
   4. P04: Sleep Interval
      (0: never, other value means display sleep interval) Unit: minute
   5. P05: Power Assist Gear
      0/3 Gear Mode: Gear 1: 2V Gear 2: 3V Gear 3: 4V
      1/5 Gear Mode: Gear 1: 2V Gear 2: 2.5V Gear 3: 4V Gear 4: 3.5V Gear 5: 4V
   6. P06: Aonad Trast-thomhas Cuibhle: òirleach Precision: 0.1
   7. P07: Magnet Steel Number (for Speed Test) Range: 1-100
   8. P08: Crìoch astair
      Raon: 0-50km / h, paramadair 50 a 'sealltainn nach eil crìoch astair.
      1. Non-communications status (panel-controlled)
      When the current speed exceeds the speed limit, the PWM output will be shut down; when the current speed falls to lower than the speed limit, the PWM output will be activated and the driving speed will be set as the current speed ± 1km/h (only applies to assist power speed, not applicable to the handlebar speed).
      2. Inbhe conaltraidh (fo smachd neach-riaghlaidh)
      Bidh an astar dràibhidh air a chumail seasmhach mar an luach cuibhrichte.
      Error Value: ±1km/h (applicable to both the assist power/handlebar speed)
      Thoir an aire: Tha na luachan gu h-àrd air an tomhas le aonad meatrach (cilemeatairean).
      When the measuring unit is switched to imperial unit (mile), the speed value displayed on the panel will be automatically switched to corresponding imperial unit, however the speed limit value in the imperial unit interface won’t change accordingly.
   9. P09: Tòisich dìreach / suidheachadh tòiseachaidh gu toiseach
      0: Tòisich dìreach
      1: Breab-gu-Tòiseachadh
   10. P10: Suidheachadh Modh Drive
       0: Power Assist – The specific gear of the assist drive decides the assist power value. In this status the handlebar does not work.
       1: Slighe Dealain - Tha an carbad air a stiùireadh leis a’ chrann-làimhe. Anns an inbhe seo chan eil an gèar cumhachd ag obair.
       2: Power Assist + Electric Drive – Electric drive does not work in zero-start status.
   11. P11: Power Assist Sensitivity Range: 1-24
   12. P12: Power Assist Starting Intensity Range: 0-5
   13. P13: Power Magnet Steel Number 5 / 8 / 12pcs
   14. P14: Luach Crìochan gnàthach: 12A gu bunaiteach; Raon: 1-20A
   15. P15: Neo-ainmichte
   16. P16: ODO Zero-Out
       Long press the up key for 5 seconds and ODO value will be erased.

Obrachaidhean

Arrangement of Keys

Ro-ràdh Keys
Key operations involve short press, long press and long press of combination keys.
Bithear a’ cleachdadh preas goirid airson obrachaidhean goirid / tric mar:

Bidh brùth fada air aon iuchair air a chleachdadh gus inbhe modh / air / dheth atharrachadh.
Long press on combination keys to set parameters, which can avoid misoperations (short press on combination keys is disabled to avoid misoperation).

Instructions of Keys

Adjust PAS level / Throttle level
In PAS mode

a. Preas goirid , PAS +1.
b. Preas goirid , PAS -1.

Atharraich taisbeanadh astar

Brùth fada + gus seòrsa taisbeanaidh astar atharrachadh.
Enable/Disable 6km/h walk boost mode, set real-time cruise and turn on/off the lights

Nuair a tha an carbad air a phàirceadh, brùth fada to enter 6km/h walk boost mode. When the vehicle is travelling, long press gus a dhol a-steach do mhodh turas-mara fìor-ùine.
Brùth fada to exit the cruise mode when the vehicle is in cruise 7 mode.
Brùth fada gus na solais a chuir air / dheth.

Tionndaidh air / dheth am Pannal LCD
When the display is in operation, long press agus cuirear dheth e, air neo tionndaidhear air.

Switch Displayed Readings in Multi-Function Section
Pàipear-naidheachd goirid gus leughaidhean atharrachadh a chithear san roinn ioma-ghnìomh.

Suidhich Parameters
Brùth fada + gus a dhol a-steach don eadar-aghaidh rèiteachaidh.

Customizable parameters include:
Wheel Diameter (unit: inch);
Magnetic Steel Number;
Backlight Brightness;
Ìosal Voltage Threshold (refer to setting P01-P14)

Anns an eadar-aghaidh suidheachaidh, brùth goirid or to turn up/down value to the parameter, which will blink after modified. After selecting the parameter that needs to be set,

• Brùth fada to save the current value, and the parameter will stop blinking;
• Pàipear-naidheachd goirid gus atharrachadh chun ath paramadair agus thèid an luach a chaidh a shuidheachadh roimhe a shàbhaladh aig an aon àm.

Brùth + gus an suidheachadh fhàgail agus na paramadairean a shàbhaladh.
Without this operation, the system will automatically exit and save the modified parameters after 10 seconds.

Thoir an aire: Mar thoradh air ùrachadh toraidh, faodaidh gum bi an toradh a cheannaich thu beagan eadar-dhealaichte bho na tuairisgeulan san leabhar-làimhe cleachdaiche seo, agus cha toir seo buaidh air cleachdadh àbhaisteach.

Sgrìobhainnean/Goireasan

ElectricBikes LCD display SWM5 Display LCD Screen [pdfLeabhar-làimhe an neach-cleachdaidh LCD display SWM5 Display LCD Screen, LCD display SWM5, Display LCD Screen, LCD Screen

Iomraidhean

• Leabhar-làimhe cleachdaiche