Danfoss MG02BB4P Vlt Micro Drive Power Chain Lengolo

Polokeho

TLHOKOMELO

KHOTHATSO MOHOLOTAGE
Li-converter tsa maqhubu li na le matla a phahamengtage ha o hokahantsoe le lisebelisoa tsa motlakase tsa AC, phepelo ea DC, kapa ho arolelana thepa. Ho hloleha ho kenya, ho qala, le ho lokisa ke basebetsi ba tšoanelehang ho ka baka lefu kapa kotsi e mpe.

• Ke basebetsi ba nang le litsebo feela ba lokelang ho etsa instolation, qala, le tlhokomelo.

TLHOKOMELO

QHOETSO E SA THABANG
Ha mochini o fetolelang khafetsa o hoketsoe ho mains a AC, enjene e ka qala ka nako efe kapa efe, ea baka kotsi ea lefu, kotsi e mpe, lisebelisoa, kapa tšenyo ea thepa. Enjene e ka qala ka sesebelisoa sa kantle, taelo ea fieldbus, lets'oao la ho kenya letsoho ho tsoa ho LCP kapa LOP, kapa kamora boemo bo hlakileng ba phoso.

• Hakolla sesebelisoa sa frequency converter ho tsoa ho mains neng kapa neng ha lintlha tsa polokeho ea motho li etsa hore ho be bohlokoa ho qoba ho qala enjene e sa reroang.
• Tobetsa [Off/Reset] ho LCP pele ho li-parameter tsa lenaneo.
• Frequency converter, motor, le lisebelisoa life kapa life tse tsamaisoang li tlameha ho ba boemong ba ts'ebetso ha sesebelisoa sa frequency converter se hoketsoe ho mains a AC.

TSEBISO
Konopo ea [Off/Reset] ha se sesebelisoa sa polokeho. Ha e hakolle converter ea maqhubu ho tsoa ho mains.

TLHOKOMELO

TS'ELISO NAKO
Mofetoleli oa maqhubu o na le li-capacitor tsa DC-link, tse ka lulang li lefisoa le ha converter ea frequency e sa sebetse. Phallo e phahamengtage ka ba teng le ha lebone la temoso la LED le tima. Ho hloleha ho ema nako e behiloeng ka mor'a hore motlakase o tlosoe pele o etsa ts'ebeletso kapa mosebetsi oa tokiso ho ka baka lefu kapa kotsi e mpe.

• Emisa koloi.
• Hakolla lisebelisoa tsa motlakase tsa AC le lisebelisoa tsa motlakase tse hole tsa DC, ho kenyeletsoa li-backups tsa betri, UPS, le likhokahano tsa DC-link ho li-converter tse ling tsa frequency.
• Hakolla kapa notlela PM motor.
• Emela hore li-capacitor li tsoe ka botlalo. Nako e fokolang ea nako ea ho ema e hlalositsoe ho Lethathamo la 1.1.
• Pele o etsa tšebeletso leha e le efe kapa mosebetsi oa ho lokisa, sebelisa molumo o nepahetsengtagsesebelisoa sa e-measuring ho etsa bonnete ba hore li-capacitor li lokollotsoe ka botlalo.

Boholo/Bonyane nako ea ho ema (metsotso)

• M1, M2, le M3 4
• M4 le M5 15

Lethathamo la 1.1 Nako ea ho lahla

Leakage current (>3.5 mA)
Latela likhoutu tsa naha le tsa lehae mabapi le ts'ireletso ea lisebelisoa tsa lisebelisoa tse nang le ho lutla ha hona joale> 3,5 mA. Theknoloji ea ho fetolela khafetsa e bolela ho fetoha ha maqhubu a phahameng ka matla a phahameng. Sena se hlahisa ho lutla ha hona joale khokahanong ea fatše. Phoso ea hajoale ho converter ea frequency ho liteishene tsa motlakase tse hlahisoang e kanna ea ba le karolo ea DC, e ka tjhafisang li-filter capacitor le ho baka hore ho be le moea oa nakoana. Boemo ba ho lutla ha fatše bo ipapisitse le meralo e fapaneng ea sistimi ho kenyelletsa ho sefa RFI, likhoele tsa enjene tse sirelelitsoeng, le matla a converter frequency.

EN/IEC61800-5-1 (Power Drive System Product Standard) e hloka tlhokomelo e khethehileng haeba hona joale ho lutla ho feta 3.5 mA. vReinforce Grounding ka 1 ea litsela tse latelang:

• Khoele e thellang bonyane 10 mm2.
• Lithapo tse 2 tse arohaneng tsa fatše ka bobeli li latela melao ea boholo. Sheba EN 60364-5-54 § 543.7 bakeng sa lintlha tse ling.

Ho sebelisa RCDs
Moo ho sebelisoang lisebelisoa tsa morao-rao (RCDs), tse tsejoang hape e le earth leakage circuit breakers (ELCBs), li latela tse latelang:

• Sebelisa li-RCD tsa mofuta oa B tse khonang ho lemoha maqhubu a AC le DC.
• Sebelisa li-RCD ka tieho ea inrush ho thibela liphoso ka lebaka la maqhubu a nakoana a fatše.
• Dimension RCDs ho latela tlhophiso ea sistimi le menahano ea tikoloho.

Tšireletso ea mocheso oa motlakase
Ho ka khoneha ho sireletsa motlakase ka ho beha 1-90 Motor Thermal Protection ho ea ho [4] leeto la ETR. Bakeng sa 'maraka oa Amerika Leboea: Ts'ebetso ea ETR e kentsoeng e fana ka tšireletso e ngata ea likoloi tsa sehlopha sa 20, ho latela NEC.

Ho kenya libakeng tse phahameng
Bakeng sa bophahamo bo ka holimo ho 2000 m, ikopanye le Danfoss mabapi le PELV.

Litaelo tsa Tšireletseho

• Etsa bonnete ba hore frequency converter e thehiloe hantle.
• Se ke oa tlosa likhokelo tsa motlakase, likhokelo tsa makoloi, kapa likhokelo tse ling tsa motlakase ha frequency converter e hoketsoe matla.
• Sireletsa basebelisi khahlano le phepelo voltage.
• Sireletsa enjene khahlanong le ho jara ho feta tekano ho latela melao ea naha le ea lehae.
• Nako ea ho lutla fatše e feta 3.5 mA. Tlosa frequency converter hantle.
• Senotlolo sa [Oì/Reset] ha se sesebelisoa sa polokeho. Ha e hakolle converter ea maqhubu ho tsoa ho mains.

Selelekela

Sepheo sa Bukana

Litaelo tsena tsa ts'ebetso li fana ka tlhahisoleseling bakeng sa ho kenya ts'ebetso e bolokehileng le ts'ebetsong ea VLT® Micro Drive FC 51 frequency converter. Litaelo tsa ts'ebetso li reretsoe ho sebelisoa ke basebetsi ba tšoanelehang. Ho sebelisa frequency converter ka mokhoa o sireletsehileng le ka botsebi, bala le ho latela litaelo tsa ts'ebetso. Ela hloko ka ho khetheha litaelo tsa polokeho le litemoso tse akaretsang. Kamehla boloka litaelo tsena tsa ts'ebetso ho converter frequency. VLT® ke letšoao la khoebo le ngolisitsoeng.

Lisebelisoa tse Eketsehileng
Lisebelisoa tse ling li teng ho utloisisa mesebetsi le mananeo a li-converter tse tsoetseng pele:

• VLT® Micro Drive FC 51 Programming Guide e fana ka lintlha tse eketsehileng mabapi le ho sebetsa ka liparamente le lisebelisoa tse ngata tsa mohlalaamples.
• Tataiso ea Moralo oa VLT® Micro Drive e fana ka leseli le felletseng mabapi le bokhoni le ts'ebetso ea ho rala litsamaiso tsa taolo ea makoloi.
• Litaelo tsa ts'ebetso ka lisebelisoa tsa boikhethelo, le phetoho ea likarolo.

Lingoliloeng le libuka tsa tlatsetso li fumaneha ho: vlt-drives.danfoss.com/Support/Technical-Documentation/

Mofetoleli oa maqhubu o lumellana le litlhoko tsa ho boloka mohopolo oa mocheso oa UL 508C. Bakeng sa lintlha tse ling, sheba karolo ea Motor Thermal Protection ho tataiso ea moralo o ikhethileng oa sehlahisoa.

Lisebelisoa tsa IT

TSEBISO

MAHLOMOLA
Ho kengoa mohloling o ka thoko oa mains, ke hore, lisebelisoa tsa IT. Boholo ba phepelo voltage lumelloa ha e hokahane le lisebelisoa tse kholo: 440 V. E le khetho, Danfoss oìers e khothalelitse li-filters tsa line bakeng sa ts'ebetso e ntlafetseng ea li-harmonics. Lethathamo la 1.10

Qoba Qaleho e sa Lebelloang
Ha sesebelisoa sa frequency converter se hoketsoe ho mains, enjene e ka qalisoa/e emisoa ho sebelisoa litaelo tsa dijithale, litaelo tsa libese, litšupiso, kapa ka LCP (phanele ea taolo ea lehae). Ho qoba ho qala ho sa lebelloang:

• Hakolla frequency converter ho mains bakeng sa lintlha tsa polokeho ea motho.
• Kamehla tobetsa [Oì/Reset] pele u fetola liparamente.

Thepa e nang le likarolo tsa motlakase ha ea lokela ho lahloa hammoho le litšila tsa lapeng. E tlameha ho bokelloa ka thoko le litšila tsa motlakase le tsa elektroniki ho latela melao ea lehae le ea hajoale.

Ho kenya

1. Hakolla FC 51 ho mains (le phepelo ea kantle ea DC, haeba e le teng).
2. Ema metsotso e 4 (M1, M2, le M3) le metsotso e 15 (M4 le M5) bakeng sa ho ntša sehokelo sa DC. Sheba Lethathamo la 1.1.
3. Hakolla liteishene tsa libese tsa DC le tsa mariki (haeba li le teng).
4. Tlosa thapo ea motlakase.

Ho kengoa ka lehlakore
Mofetoleli oa maqhubu a ka behoa ka lehlakoreng le leng bakeng sa litekanyetso tsa IP20 'me o hloka tumello ea 100 mm ka holimo le ka tlase bakeng sa ho pholisa. Sheba khaolo ea 1.7 Litlhaloso bakeng sa lintlha tse mabapi le litekanyetso tsa tikoloho ea converter frequency.

Mechanical Dimensions
Setšoantšo sa ho cheka se fumanoa ho íap ea sephutheloana.

	Matla [kW]			Bophahamo [limilimithara]			Bophara [limilimithara]		Botebo1) [limilimithara]	Boholo boima
Sebaka se koaletsoeng	1×200-240 V	3×200-240 V	3×380-480 V	A	A (ho kenyeletsoa decoupling poleiti)	a	B	b	C	[kg]
M1	0.18–0.75	0.25–0.75	0.37–0.75	150	205	140.4	70	55	148	1.1
M2	1.5	1.5	1.5–2.2	176	230	166.4	75	59	168	1.6
M3	2.2	2.2–3.7	3.0–7.5	239	294	226	90	69	194	3.0
M4			11.0–15.0	292	347.5	272.4	125	97	241	6.0
M5			18.5–22.0	335	387.5	315	165	140	248	9.5
1) Bakeng sa LCP e nang le potentiometer, eketsa 7.6 mm.

Sets'oants'o 1.1 Litekanyo tsa Mechini

TSEBISO
Li-cabling tsohle li tlameha ho ikamahanya le melao ea naha le ea lehae mabapi le likaroloana tsa cable le mocheso oa tikoloho. Li-conductors tsa koporo tse hlokahalang, (60-75 ° C) lia khothaletsoa.

	Matla [kW]			Torque [Nm]
Sebaka se koaletsoeng	1×200–240 V	3×200–240 V	3×380–480 V	Mola	Motor	DC kgokelo/ brake	Taolo liteishene	Fatše	Relay
M1	0.18–0.75	0.25–0.75	0.37–0.75	0.8	0.7	Hlapa1)	0.15	3	0.5
M2	1.5	1.5	1.5–2.2	0.8	0.7	Hlapa1)	0.15	3	0.5
M3	2.2	2.2–3.7	3.0–7.5	0.8	0.7	Hlapa1)	0.15	3	0.5
M4	–	–	11.0–15.0	1.3	1.3	1.3	0.15	3	0.5
M5	–	–	18.5–22.0	1.3	1.3	1.3	0.15	3	0.5
1) Lihokelo tsa spade (6.3 mm (0.25 in) Li-plug tsa Faston)

Lethathamo la 1.2 Ho tiisa Li-terminals

Tšireletso ea potoloho ea lekala Ho sireletsa ts'ebetso khahlanong le likotsi tsa motlakase le mollo, sireletsa lipotoloho tsohle tsa lekala ka ho kenya, li-switchgear, mechine, joalo-joalo, khahlanong le li-circuits le overcurrent ho latela melao ea naha / ea machaba.

Tšireletso ea nako e khutšoanyane
Sebelisa li-fuse tse boletsoeng ho Lethathamo la 1.3 ho sireletsa basebeletsi ba tšebeletso kapa lisebelisoa tse ling haeba ho na le ho hlōleha ha ka hare ho yuniti kapa potoloho e khutšoanyane ho sehokelo sa DC. Haeba ho na le potoloho e khuts'oane molemong oa motlakase kapa brake, converter ea frequency e fana ka ts'ireletso e felletseng ea potoloho e khuts'oane.

Tšireletso e fetelletseng
Ho qoba overheating ea lik'hebole ka instola tse, fana ka overload tšireletso. Kamehla etsa tšireletso ea overcurrent ho latela melao ea naha. Li-fuse li tlameha ho etsoa bakeng sa ts'ireletso ho potoloho e khonang ho fana ka
boholo ba 100000 Arms (symmetrical), 480 V boholo. Ho latela melao e seng ya UL Haeba UL/cUL e sa lokela ho latelwa, sebedisa difuse tse boletsweng ho Lethathamo la 1.3, tse netefatsang ho latelwa

EN50178/IEC61800-5-1: Haeba ho na le ho se sebetse hantle, ho se latele tlhahiso ea fuse ho ka baka tšenyo ho frequency converter le ho kenya.

FC 51	Boholo fuse UL						Boholo fuse e seng–UL
	Bussmann	Bussmann	Bussmann	Littelfuse	Ferraz Shawmut	Ferraz Shawmut
1×200–240 V
kW	Mofuta oa RK1	Mofuta oa J	Mofuta oa T	Mofuta oa RK1	Mofuta oa CC	Mofuta oa RK1	Mofuta oa gG
0K18-0K37	KTN-R15	JKS-15	JJN-15	KLN-R15	ATM-R15	A2K-15R	16A
0K75	KTN-R25	JKS-25	JJN-25	KLN-R25	ATM-R25	A2K-25R	25A
1K5	KTN-R35	JKS-35	JJN-35	KLN-R35	–	A2K-35R	35A
2K2	KTN-R50	JKS-50	JJN-50	KLN-R50	–	A2K-50R	50A
3×200–240 V
0K25	KTN-R10	JKS-10	JJN-10	KLN-R10	ATM-R10	A2K-10R	10A
0K37	KTN-R15	JKS-15	JJN-15	KLN-R15	ATM-R15	A2K-15R	16A
0K75	KTN-R20	JKS-20	JJN-20	KLN-R20	ATM-R20	A2K-20R	20A
1K5	KTN-R25	JKS-25	JJN-25	KLN-R25	ATM-R25	A2K-25R	25A
2K2	KTN-R40	JKS-40	JJN-40	KLN-R40	ATM-R40	A2K-40R	40A
3K7	KTN-R40	JKS-40	JJN-40	KLN-R40	–	A2K-40R	40A
3×380–480 V
0K37-0K75	KTS-R10	JKS-10	JJS-10	KLS-R10	ATM-R10	A6K-10R	10A
1K5	KTS-R15	JKS-15	JJS-15	KLS-R15	ATM-R15	A2K-15R	16A
2K2	KTS-R20	JKS-20	JJS-20	KLS-R20	ATM-R20	A6K-20R	20A
3K0	KTS-R40	JKS-40	JJS-40	KLS-R40	ATM-R40	A6K-40R	40A
4K0	KTS-R40	JKS-40	JJS-40	KLS-R40	ATM-R40	A6K-40R	40A
5K5	KTS-R40	JKS-40	JJS-40	KLS-R40	–	A6K-40R	40A
7K5	KTS-R40	JKS-40	JJS-40	KLS-R40	–	A6K-40R	40A
11K0	KTS-R60	JKS-60	JJS-60	KLS-R60	–	A6K-60R	63A
15K0	KTS-R60	JKS-60	JJS-60	KLS-R60	–	A6K-60R	63A
18K5	KTS-R60	JKS-60	JJS-60	KLS-R60	–	A6K-60R	80A
22K0	KTS-R60	JKS-60	JJS-60	KLS-R60	–	A6K-60R	80A

Ho hokela ho Mains le Motor

Frequency converter e etselitsoe ho sebelisa li-motor tse tloaelehileng tse 3-mohato oa asynchronous. Frequency converter e etselitsoe ho amohela likhoele tse kholo / tsa motor tse nang le karolo e kholo ea 4 mm2/10 AWG (M1, M2 le M3), le karolo e kholo ea 16 mm2/6 AWG (M4 le M5).

• Sebelisa thapo ea enjine e sirelelitsoeng/e nang le lihlomo ho tsamaisana le lintlha tse hlahisoang ke EMC, 'me u hokele thapo ena le poleiti e kopanyang le tšepe ea enjene.
• Boloka thapo ya enjene e le kgutshwane kamoo o ka kgonang ho fokotsa lerata le maqhubu a dutlang.
• Bakeng sa lintlha tse ling mabapi le ho hlongoa poleiti ea ho kopanya, bona VLT® Micro Drive FC 51 Decoupling Mounting Plate Instructions.
• Hape, bona khaolo ea EMC-Nepahetse ea Kemiso ea Motlakase ho VLT® Micro Drive FC 51 Design Guide.

1. Kenya lithapo tsa fatše ho theminale ea PE.
2. Hokela enjene ho li-terminals U, V, le W.
3. Lithaba tse kholo li fana ka li-terminals L1/L, L2, le L3/N (3-mohato) kapa L1/L le L3/N (mohato o le mong) le ho tiisa.

TSEBISO
Sheba bokamorao ba sekoaelo sa theminale bakeng sa lintlha tsa litheminale le li-switches. Se ke oa sebelisa li-switches ka matla a frequency converter. Beha 6-19 Terminal 53 Mode ho latela Fetola 4 boemo.

Fetola 1	Ho tima=Litheminale tsa PNP 291)
	Ho=liteishene tsa NPN 29
Fetola 2	Tloha=PNP theminale 18, 19, 27 le 331)
	Ho=NPN theminale 18, 19, 27 le 33
Fetola 3	Ha ho ts'ebetso
Fetola 4	Ho theoha=Boemelo ba 53 0–10 V1)
	Ho=Terminal 53 0/4-20 mA
1)=setting ea kamehla

Lethathamo la 1.4 Litlhophiso tsa S200 Swichi 1–4
Setšoantšo sa 1.5 se bonts'a liteishene tsohle tsa taolo ea frequency converter. Ho sebelisa Start (terminal 18) le referense ea analog (terminal 53 kapa 60) li etsa hore frequency converter e sebetse.

Potoloho ea Matla - Ho Fetileview

Li-brake (BR+ le BR-) ha li sebetse bakeng sa boholo ba sebaka se kampetsoeng M1. Ho fumana leseli mabapi le li-resistors tsa brake, bona VLT® Brake Resistor MCE 101 Design Guide. Ntho e ntlafalitsoeng ea matla le ts'ebetso ea EMC e ka finyelloa ka ho kenya khetho ea Danfoss line €lters. Li-filters tsa matla tsa Danfoss le tsona li ka sebelisoa bakeng sa ho arolelana mojaro. Ho fumana lintlha tse ling mabapi le ho arolelana thepa, bona molaetsa oa kopo oa VLT® FC 51 Micro Drive Load Share.

Load Sharing/Brake
Sebelisa li-plug tsa Faston tsa 6.3 mm tse etselitsoeng matla a phahamengtage bakeng sa DC (ho arolelana thepa le mariki). Ikopanye le Danfoss kapa u bone litaelo tsa ho arolelana Load VLT® 5000 bakeng sa ho arolelana mojaro le VLT® 2800/5000/5000 FLUX/FCD 300 Brake bakeng sa brake.

Ho arolelana meroalo
Hokela li-terminals -UDC le +UDC/+BR.

Brake
Hokela li-terminals -BR le +UDC/+BR (ha li sebetse bakeng sa boholo ba sebaka se kampetsoeng M1).

TSEBISO
Moqtagmaemo a fihlang ho 850 V DC a ka hlaha lipakeng tsa liteishene + UDC/+BR le -UDC. E sa sirelelitsoe ka potoloho e khuts'oane.

Lenaneo

Programming on Automatic Motor Adaptation (AMA)
Bakeng sa tlhaiso-leseling e batsi ka mananeo, bona Tataiso ea Mananeo ea VLT® Micro Drive FC 51.

TSEBISO
Frequency converter le eona e ka hlophisoa ho tsoa komporong ka RS485 com-port ka ho kenya MCT 10 Set-up Software. Software ena e ka odara ho sebelisa nomoro ea khoutu 130B1000 kapa ea khoasolla ho tsoa ho Danfoss. web sebaka: www.danfoss.com/BusinessAreas/DrivesSolutions/softwaredownload

Tobetsa [Menu] ho khetha 1 ho tse latelang:

Boemo
Bakeng sa ho bala feela.

Quick Menu
Bakeng sa ho fihlella Quick Menus 1 le 2.

Main menu
Bakeng sa ho fihlella liparamente tsohle.

Linotlolo tsa ho tsamaea

• [Ka morao]: Bakeng sa ho fetela mohatong o fetileng kapa mothating oa sebopeho sa ho sesa.
• [▲] [▼]: Bakeng sa ho tsamaisa lipakeng tsa lihlopha tsa paramente, li-parameter le ka har'a liparamente.
• [OK]: Bakeng sa ho khetha paramente le ho amohela liphetoho ho litlhophiso tsa paramethara. Ho tobetsa [OK] ho feta s 1 ho kenya mokhoa oa Fetola. Ho
• Fetola mokhoa, hoa khoneha ho etsa liphetoho tse potlakileng ka ho tobetsa [▲] [▼] e kopantsoeng le [OK].
• Tobetsa [▲] [▼] ho fetola boleng. Tobetsa [OK] ho suthisetsa lipakeng tsa linomoro kapele.
• Ho tsoa ho Fetosa mode, tobetsa [OK] ho feta s 1 hape ka liphetoho tse bolokang kapa tobetsa [Back] ntle le liphetoho tse bolokoang.

Linotlolo tsa ts'ebetso
Lebone le lesehla ka holim'a linotlolo tsa ts'ebetso le bontša konopo e sebetsang.

• [Nehelana ka letsoho]: E qala enjene mme e nolofalletsa taolo ea converter ea frequency ka LCP.
• [E tima/Seta bocha]: Enjene ea emisa. Haeba e le mokgweng wa alamo, enjene e tla botjha.
• [E butswe Frequency converter e laoloa ka liteishene tsa taolo kapa puisano ea serial. [Potentiometer] (LCP12): Potentiometer e sebetsa ka litsela tse 2 ho itšetlehile ka mokhoa oo mochine oa ho fetolela o sebetsang ka oona. Ka Auto On mode, potentiometer e sebetsa e le mokhoa o eketsehileng oa analog o ka khonehang. Ka Hand On mode, potentiometer e laola litšupiso tsa lehae.

Lenaneo ho Automatic Motor Tuning (AMT)
Matha AMT ho ntlafatsa tšebelisano lipakeng tsa converter ea frequency le enjene ka mokhoa oa VVC +.

• Mofetoleli oa maqhubu o etsa mohlala oa lipalo oa enjene bakeng sa ho laola motlakase oa motlakase ka tsela eo e ntlafatsa ts'ebetso ea motlakase.
• Matha mokhoa ona ka enjene e batang bakeng sa liphetho tse ntle. Ho tsamaisa AMT, sebelisa LCP ea linomoro (NLCP). Ho na le mekhoa e 2 ea AMT bakeng sa li-converter tsa maqhubu.

Mokhoa oa 1

1. Kenya lenane la mantlha.
2. Eya ho sehlopha sa parameter 1-** Mojaro le Motor.
3. Tobetsa [OK].
4. Beha liparamente tsa enjene u sebelisa data ea nameplate bakeng sa sehlopha sa paramethara 1-2 * Motor Data.
5. Eya ho 1-29 Automatic Motor Tuning (AMT).
6. Tobetsa [OK].
7. Khetha [2] Numella AMT.
8. Tobetsa [OK].
9. Teko e sebetsa ka bo eona 'me e bontša ha e felile.

Mokhoa oa 2

1. Kenya lenane la mantlha.
2. Eya ho sehlopha sa parameter 1-** Mojaro le Motor.
3. Tobetsa [OK].
4. Beha liparamente tsa enjene u sebelisa lintlha tsa nameplate bakeng sa lihlopha tsa paramethara 1-2 * Motor Data.
5. Eya ho 1-29 Automatic Motor Tuning (AMT).
6. Tobetsa [OK].
7. Khetha [3] Tlatsa AMT e nang le enjene e potolohang.
8. Tobetsa [OK].
9. Teko e sebetsa ka bo eona 'me e bontša ha e felile.

TSEBISO
Ka mokhoa oa 2, rotor e potoloha nakong ea tsoelo-pele ea AMT. Se ke oa eketsa mojaro ho enjene tsoelo-peleng ena ea AMT.

Parameter e fetangview

0-** Ts'ebetso / Pontšo	0-61 Phihlello ho E kholo/Ka potlako Lenane	1-29 Ka ho iketsa Motor Tokiso	1-82 Min Speed ​​bakeng sa Mosebetsi. ho
0-0* Litlhophiso tsa Motheo	w/o Password	(AMT)	Ema [Hz]
0-03 Litlhophiso tsa Libaka	*[0] phihlello e felletseng	*[0] Tlosa	0.0–20.0 Hz * 0.0 Hz
*[0] Machabeng	[1] LCP: Bala Feela	[2] Thusa AMT	1-9 * Mocheso oa Motlakase
[1] US	[2] LCP: Ha ho na Phihlelo	[3] Tlatsa AMT ka Ho potoloha	1-90 Motor Mocheso Tshireletso
0-04 Opere. Naha ho Power-up	1-** Mojaro/Motoroli	koloi	*[0] Ha ho tšireletso
(Letsoho)	1-0* Kakaretso Litlhophiso	1-3* Adv. Motor Lintlha	[1] Temoso ea Thermistor
[0] Tsoela pele	1-00 Tlhophiso Mokhoa	1-30 Stator Khanyetso (Rs)	[2] Leeto la Thermistor
*[1] E qobelloang ho emisa, ref=khale	*[0] Bula loop ka lebelo	[Ohm] * Dep. ho data ea motlakase	[3] Etr temoso
[2] Ho emisa ho qobelloa, ref=0	[3] Ts'ebetso	1-33 Stator Leakage Reactance	[4] Leeto la Etr
0-1* Tlhophiso Ho tshoara	1-01 Motor Taolo Molao-motheo	(X1)	1-93 Thermistor Mohlodi
0-10 E sebetsa Tlhophiso	[0] U/f	[Ohm] * Dep. ho data ea motlakase	*[0] Ha ho letho
*[1] Ntlafatso ea 1	*[1] VVC+	1-35 Main Reacts (Xh)	[1] Kenyelletso ea analoji 53
[2] Setulo sa 2	1-03 Litšobotsi tsa Torque	[Ohm] * Dep. ho data ea motlakase	[6] Kenyelletso ea dijithale 29
[9] Litlhophiso tse ngata	*[0] Torque e sa feleng	1-5* Laela Indep. Tlhophiso	2-** Mariki
0-11 Fetola Seta	[2] Optim ea Matla a Eketsehileng.	1-50 Motor Magnetization at 0	2-0* DC-Brake
*[1] Ntlafatso ea 1	1-05 Mokhoa oa Lehae Tlhophiso	Lebelo	2-00 DC Tšoara Hona Joale
[2] Setulo sa 2	[0] Lebelo la Open Loop	0–300% *100%	0–150% *50%
[9] Tlhophiso e sebetsang	*[2] Joalo ka config parar. 1-00	1-52 Min Speed ​​Norm. Magnet.	2-01 DC Brake Current
0-12 Sehokelo Beha-UPS	1-2* Motor Lintlha	[Hz]	0–150% *50%
[0] Ha e kopane	1-20 Motor Matla [kW] [hp]	0.0–10.0 Hz *0.0Hz	2-02 DC Braking Time
*[20] E hokahane	[1] 0.09 kW/0.12 hp	1-55 U/f Sebopeho – U	0.0–60.0 s *10.0 s
0-31 Custom Readout Min Scale	[2] 0.12 kW/0.16 hp	0-999.9 V	2-04 DC Brake Cut In Speed
0.00–9999.00 * 0.00	[3] 0.18 kW/0.25 hp	1-56 U/f Sebopeho – F	0.0–400.0 Hz *0.0Hz
0-32 Custom Readout Max Scale	[4] 0.25 kW/0.33 hp	0-400 Hz	2-1 * Mosebetsi oa Matla a Brake.
0.00–9999.00 * 100.0	[5] 0.37 kW/0.50 hp	1-6* Laela Theha. Tlhophiso	2-10 Mosebetsi oa Brake
0-4* LCP Keypad	[6] 0.55 kW/0.75 hp	1-60 Tlhōlisano ea Moroalo o Tlase-	*[0] Tlosa
0-40 [Letsoho ho] Senotlolo on LCP	[7] 0.75 kW/1.00 hp	seteishene	[1] Resistor brake
[0] E holofetse	[8] 1.10 kW/1.50 hp	0–199% *100%	[2] Brake ea AC
*[1] E lumelletsoe	[9] 1.50 kW/2.00 hp	1-61 Matšeliso a Lebelo le Leholo-	2-11 Brake Resistor (ohm)
0-41 [E tima / Seta bocha] Senotlolo ka LCP	[10] 2.20 kW/3.00 hp	seteishene	Min/Max/default: Powersize dep.
[0] Tlosa Tsohle	[11] 3.00 kW/4.00 hp	0–199% *100%	2-14 Brake Voltage fokotsa
*[1] Thusa Tsohle	[12] 3.70 kW/5.00 hp	1-62 Thella Matšeliso	0 - Powersize dep.* 0
[2] Numella Reset Feela	[13] 4.00 kW/5.40 hp	-400–399% *100%	2-16 AC Brake, Max ea hona joale
0-42 [Auto on] Senotlolo ho LCP	[14] 5.50 kW/7.50 hp	1-63 Thella Matšeliso Nako	0-150% *100%
[0] E holofetse	[15] 7.50 kW/10.00 hp	Kamehla	2-17 Overvoltage Taolo
*[1] E lumelletsoe	[16] 11.00 kW/15.00 hp	0.05–5.00 s *0.10 s	*[0] E holofetse
0-5* Kopitsa/Boloka	[17] 15.00 kW/20.00 hp	1-7 * Qala Liphetoho	[1] E lumelletsoe (ha e eme)
0-50 Kopi ea LCP	[18] 18.50 kW/25.00 hp	1-71 Qala tieho	[2] E lumelletsoe
*[0] Ha ho kopi	[19] 22.00 kW/29.50 hp	0.0–10.0 s *0.0 s	2-2* Mechini Brake
[1] Tsohle ho LCP	[20] 30.00 kW/40.00 hp	1-72 Qala Mosebetsi	2-20 Lokolla Brake Hona joale
[2] Tsohle ho tsoa ho LCP	1-22 Moqtage	[0] DC ho ts'oara / ho lieha nako	0.00–100.0 A *0.00 A
[3] Boholo ba indep. ho tsoa ho LCP	50-999 V * 230–400 V	[1] nako ea brake / tieho ea DC	2-22 Kenya tshebetsong Brake Lebelo [Hz]
0-51 Tlhophiso Kopitsa	1-23 Maqhubu a likoloi	*[2] Nako ea lebopo / tieho	0.0–400.0 Hz * 0.0 Hz
*[0] Ha ho kopi	20–400 Hz * 50 Hz	1-73 Flying Start	3-** Referense / Ramps
[1] Kopitsa ho setup 1	1-24 Motor Current	*[0] E holofetse	3-0* Meeli ea Litšupiso
[2] Kopitsa ho setup 2	0.01–100.00 A *Motortype dep.	[1] E lumelletsoe	3-00 Referense Range
[9] Kopitsa ho tloha fekthering setup	1-25 Motor Lebitso Lebelo	1-8 * Emisa Liphetoho	*[0] Mots – Max
0-6* Lekunutu	100–9999 rpm *Motortype dep.	1-80 Mosebetsi at Ema	[1] -Boholo - +Boholo
0-60 (Ka sehloohong) Lenane Password		*[0] Lebopo	3-02 Bonyane Referense
0–999 *0		[1] DC tšoara	-4999–4999 *0.000
			3-03 Boholo Referense
			-4999–4999 *50.00
1) M4 le M5 feela

3-1* Litšupiso	3-81 Quick Emisa Ramp Nako	5-1* Litlhahiso tsa Digital5-10 Terminal	5-40 Relay ea Mosebetsi
3-10 Reference Preset	0.05–3600 s *3.00 s (10.00s1))	18 Dijithale Kenyeletso	[52] Ref. mafolofolo
-100.0–100.0% *0.00% 3-11 Jog	4-** Meeli/Litemoso	[0] Ha ho ts'ebetso	[53] Ha ho alamo
Lebelo [Hz]	4-1 * Meeli ea Motor 4-10 Motor	[1] Etsa bocha	[54] Qala cmd e sebetsa
0.0–400.0 Hz * 5.0 Hz	Lebelo Tataiso	[2] Lebōpo le fapaneng	[55] Ho mathela morao
3-12 Fumana / fokotsa Boleng	*[0] Ka tšupa-nako Haeba Par. 1-00 e behiloe	[3] Lebopo le ho seta bocha inv.	[56] Khanna ka mokhoa oa letsoho
0.00–100.0% * 0.00%	ho koala taolo ya loop	[4] Ho ema ka potlako ho fapana	[57] Khanna ka mokhoa oa auto
3-14 Seta pele Leloko Referense	[1] CounterClockwise	[5] DC-brake inv.	[60-63] Moetsisi 0-3
-100.0–100.0% *0.00%	*[2] Ka bobeli haeba Par. 1-00 e behiloe ho	[6] Emisa inv	[70-73] Molao oa kelello 0-3
3-15 Referense Mohlodi 1	taolo ya loop e bulehileng	*[8] Qala	[81] SL tlhahiso ea dijithale B
[0] Ha ho ts'ebetso	4-12 Motor Lebelo Tlase Moeli	[9] Qalo e lekantsoeng	5-41 Ka tieho, Relay
*[1] Maikutlo a Analog 53	[Hz]	[10] Ho khutlela morao	0.00–600.00 s *0.01 s
[2] Kenyelletso ea analoji 60	0.0–400.0 Hz * 0.0 Hz	[11] Qala ho khutlela morao	5-42 E tima tieho, Relay
[8] Pulse input 33	4-14 Motor Lebelo Phahameng Moeli	[12] Nolofaletsa ho qala pele	0.00–600.00 s *0.01 s
[11] bese ea lehae ref	[Hz]	[13] E nolofalletsa ho qala ka morao	5-5* Pulse Kenyeletso
[21] LCP Potentiometer	0.1–400.0 Hz * 65.0 Hz	[14] Jog	5-55 Terminal 33 Maqhubu a Tlase
3-16 Referense Mohlodi 2	4-16 Torque Moeli Mochini oa likoloi	[16-18] Preset ref bit 0-2	20–4999 Hz * 20 Hz
[0] Ha ho ts'ebetso	0–400% *150%	[19] Referense reference5-10	5-56 Theminale 33 Phahameng
[1] Analoji ho 53	4-17 Torque Limit Jenereithara	Kenyelletso ea Digital ea Terminal 18	Khafetsa
*[2] Analoji ho 60	Mokhoa	[20] Qhamisa tlhahiso	21–5000 Hz * 5000 Hz
[8] Pulse input 33	0–400% *100%	[21] Potlakisa	5-57 Nako. 33 Low Ref./Feedb.
*[11] Litšupiso tsa libese tsa lehae	4-4* Adj. Litemoso 2	[22] Fokotsa fatše	Boleng
[21] LCP Potentiometer	4-40 Tlhokomediso Khafetsa Tlase	[23] Seta khetha hanyane 0	-4999–4999 *0.000
3-17 Referense Mohlodi 3	0.00–Boleng ba 4-41 Hz *0.0 Hz	[28] Tsoela pele	5-58 Nako. 33 Phahameng Ref./Feedb.
[0] Ha ho ts'ebetso	4-41 Tlhokomediso Khafetsa Phahameng	[29] Butle butle	Boleng
[1] Maikutlo a Analog 53	Boleng ba 4-40–400.0 Hz *400.00	[34] Ramp hanyane 0	-4999–4999 *50.000
[2] Kenyelletso ea analoji 60	Hz	[60] Counter A (holimo)	6-** Analog In/Out
[8] Pulse input 33	4-5* Adj. Litemoso	[61] Counter A (tlase)	6-0* Mokhoa oa Analog I/O
*[11] bese ea lehae ref	4-50 Tlhokomeliso Hajoale e Tlase	[62] Khutlisa k'haonte ea A	6-00 Live Zero Timeout Time
[21] LCP Potentiometer	0.00–100.00 A *0.00 A	[63] Counter B (holimo)	1-99 s *10 s
3-18 Leloko Katoloso Ref.	4-51 Temoso ea Hona joale Holimo	[64] Counter B (tlase)	6-01 Live Zero TimeoutFunction
Mohlodi	0.0–100.00 A *100.00 A	[65] Khutlisa k'haonte ea B	*[0] Tlosa
*[0] Ha ho ts'ebetso	4-54 Tlhokomediso Referense Tlase	5-11 Theminale 19 Dijithale Kenyeletso	[1] Qhamisa tlhahiso
[1] Maikutlo a Analog 53	-4999.000–Boleng ba 4-55	Sheba serapa. 5-10. * [10] Ho khutlela morao	[2] Emisa
[2] Kenyelletso ea analoji 60	* -4999.000	5-12 Theminale 27 Dijithale Kenyeletso	[3] Ho matha
[8] Pulse input 33	4-55 Tlhokomediso Referense Phahameng	Sheba serapa. 5-10. * [1] Khutlisa bocha	[4] Lebelo le phahameng
[11] bese ea lehae ref	Boleng ba 4-54–4999.000	5-13 Theminale 29 Dijithale Kenyeletso	[5] Ema o nke leeto
[21] LCP Potentiometer	* 4999.000	Sheba serapa. 5-10. * [14] Jog	6-1* Ho kenya Analog 1
3-4* Ramp 1	4-56 Tlhokomediso Maikutlo Tlase	5-15 Theminale 33 Dijithale Kenyeletso	6-10 Terminal 53 Low Voltage
3-40 Ramp 1 Mofuta	-4999.000–Boleng ba 4-57	Sheba serapa. 5-10. * [16] Setho se seng sa ref	0.00–9.99 V *0.07 V
*[0] Linear	* -4999.000	0	6-11 Theminale 53 Phahameng Moqtage
[2] Sine2 ramp	4-57 Tlhokomediso Maikutlo Phahameng	[26] Precise Stop Inverse	0.01–10.00 V *10.00 V
3-41 Ramp 1 Ramp up Time	Boleng ba 4-56-4999.000 * 4999.000	[27] Qala, Nepahetse Emisa	6-12 Terminal 53 Low Current
0.05–3600 s *3.00 s (10.00 s1))	4-58 E sieo Motor Mokhahlelo	[32] Pulse Input	0.00–19.99 mA *0.14 mA
3-42 Ramp 1 Ramp Tlase Nako	Mosebetsi	5-3* Liphetho tsa Dijithale	6-13 Theminale 53 Phahameng Hona joale
0.05–3600 s *3.00s (10.00s1))	[0] Tlosa	5-34 Ka tieho, Terminal 42	0.01–20.00 mA *20.00 mA
3-5* Ramp 2	*[1] Bula	Dijithale Sephetho	6-14 Nako. 53 Low Ref./Feedb.
3-50 Ramp 2 Mofuta	4-6* Lebelo Bypass	0.00–600.00 s * 0.01 s	Boleng
*[0] Linear	4-61 Bypass Lebelo Ho tloha [Hz]	5-35 E tima Ho lieha, Terminal 42	-4999-4999 *0.000
[2] Sine2 ramp	0.0–400.0 Hz * 0.0 Hz	Dijithale Sephetho	6-15 Nako. 53 Phahameng Ref./Feedb.
3-51 Ramp 2 Ramp up Time	4-63 Bypass Speed ​​​​To [Hz]	0.00–600.00 s * 0.01 s	Boleng
0.05–3600 s *3.00 s (10.00 s1))	0.0–400.0 Hz * 0.0 Hz	5-4 * Relays	-4999-4999 *50.000
3-52 Ramp 2 Ramp fatshe Nako			6-16 Terminal 53 Filter Time
0.05–3600 s *3.00 s (10.00 s1))			Kamehla
3-8* Tse ling tsa Ramps			0.01–10.00 s *0.01 s
3-80 Jog Ramp Nako
0.05–3600 s *3.00 s (10.00s1))
1) M4 le M5 feela

6-19 Theminale 53 mokgoa	Ctrl. 7-30 Tshebetso PI Tloaelehileng/	8-33 FC Port Parity	8-52 DC Brake Select
*[0] Moqtage mokhoa	E fapaneng Ctrl	*[0] Esita le Parity, 1 Stop Bit	Sheba serapa. 8-50 * [3] LogicOr
[1] Mokhoa oa hajoale 4	*[0] Tlwaelehile	[1] Odd Parity, 1 Stop Bit	8-53 Qala Khetha
6-2* Ho kenya Analog 2	[1] E fapaneng	[2] Ha ho Parity, 1 Stop Bit	Sheba serapa. 8-50 * [3] LogicOr
6-22 Terminal 60 Low Current	7-31 Tshebetso PI Mohanyetsi Windup	[3] Ha ho Parity, 2 Stop Bits	8-54 Ho kgutlela morao Khetha
0.00–19.99 mA *0.14 mA	[0] Tlosa	8-35 Bonyane Karabo tieho	Sheba serapa. 8-50 * [3] LogicOr
6-23 Theminale 60 Phahameng Hona joale	*[1] Thusa	0.001–0.5 *0.010 s	8-55 Tlhophiso Khetha
0.01–20.00 mA *20.00 mA	7-32 Tshebetso PI Qala Lebelo	8-36 Max Karabo tieho	Sheba serapa. 8-50 * [3] LogicOr
6-24 Nako. 60 Low Ref./Feedb.	0.0–200.0 Hz * 0.0 Hz	0.100–10.00 s *5.000 s	8-56 Seta pele Referense Khetha
Boleng	7-33 Tshebetso PI Tekano	8-4* FC MC protocol beha	Sheba parameter 8-50 * [3] LogicOr
-4999-4999 *0.000	Fumana	8-43 FC Port PCD Bala Configu-	8-8 * Puisano ea libese
6-25 Nako. 60 Phahameng Ref./Feedb.	0.00–10.00 *0.01	kabo	Diagnostics
Boleng	7-34 Tshebetso PI Kakaretso Nako	*[0] Ha ho na Expressionlimit	8-80 Bese Molaetsa Bala
-4999–4999 *50.00	0.10–9999 s *9999 s	[1] [1500] Lihora tsa Ts'ebetso	0-0 N/A *0 N/A
6-26 Terminal 60 Filter Time	7-38 Tshebetso PI Fepa Tsoela pele	[2] [1501] Lihora tsa ho Tsamaisa	8-81 Palo ea Phoso ea Libese
Kamehla	Ntlha	[3] [1502] kWh Counter	0-0 N/A *0 N/A
0.01–10.00 s *0.01 s	0–400% *0%	[4] [1600] Laola Lentsoe	8-82 Lekhoba Melaetsa Rcvd
6-8 * LCP Potentiometer	7-39 On Referense Bophahamo ba motlakase	[5] [1601] Reference [Unit]	0-0 N/A *0 N/A
6-80 LCP Potmeter Thusa	0–200% *5%	[6] [1602] Reference %	8-83 Lekhoba Phoso Bala
[0] E holofetse	8-** Kom. le Dikgetho	[7] [1603] Boemo ba Lentsoe	0-0 N/A *0 N/A
*[1] Thusa	8-0* Kakaretso Litlhophiso	[8] [1605] Boleng ba Bohlokoa [%]	8-9* Bese Jog / Maikutlo
6-81 LCP pitsa. Tšebeliso e tlaase	8-01 ​​Sebaka sa Taolo	[9] [1609] Custom Readout	8-94 Bese maikutlo 1
-4999–4999 *0.000	*[0] Digital le ControlWord	[10] [1610] Matla [kW]	0x8000-0x7FFF *0
6-82 LCP pitsa. Reference e Phahameng	[1] Digithale feela	[11] [1611] Matla [hp]	13-** Bohlale Maikutlo
-4999–4999 *50.00	[2] ControlWord feela	[12] [1612] Motor Voltage	13-0* Litlhophiso tsa SLC
6-9* Analoge Sephetho xx	8-02 Laola Mohloli oa Lentsoe	[13] [1613] Khafetsa	13-00 SL Molaoli Mokhoa
6-90 Theminale 42 Mokhoa	[0] Ha ho letho	[14] [1614] Motor Current	*[0] Tlosa
*[0] 0-20 mA	*[1] FC RS485	[15] [1615] Khafetsa [%]	[1] Bula
[1] 4-20 mA	8-03 Laola Nako ea Lentsoe	[16] [1618] Motor Thermal	13-01 Qala Ketsahalo
[2] Sephetho sa Dijithale	Nako	[17] [1630] DC Link Voltage	[0] Bohata
6-91 Terminal 42 Output ea Analog	0.1–6500 s *1.0 s	[18] [1634] Heatsink Temp.	[1] 'Nete
*[0] Ha ho ts'ebetso	8-04 Laola Nako ea Lentsoe	[19] [1635] Inverter Thermal	[2] Ho matha
[10] Khafetsa ea Liphetho	Mosebetsi	[20] [1638] SL Controller State	[3] InRange
[11] Tšupiso	*[0] Tlosa	[21] [1650] Tšupiso ea Kantle	[4] OnReference
[12] Maikutlo	[1] Qhamisa Sephetho	[22] [1651] Tšupiso ea Pulse	[7] OutOfCurrentRange
[13] Motor Current	[2] Emisa	[23] [1652] Maikutlo [Uniti]	[8] Ka tlaseILow
[16] Matla	[3] Ho matha	[24] [1660] Kenyelletso ea Dijithale	[9] HolimoIPhahameng
[19] DC Link Voltage	[4] Max. Lebelo	18,19,27,33	[16] ThermalWarning
[20] Reference bese	[5] Ema o nke leeto	[25] [1661] Kenyeletso ya Dijithale 29	[17] MainOutOfRange
6-92 Theminale 42 Dijithale Sephetho	8-06 Seta bocha Taolo Lentsoe	[26] [1662] Maikutlo a Analoji 53 (V)	[18] Ho khutlela morao
Sheba parameter 5-40	Khefutso	[27] [1663] Maikutlo a Analoji 53 (mA)	[19] Tlhokomeliso
*[0] Ha ho Ts'ebetso	*[0] Ha ho Mosebetsi	[28] [1664] Maikutlo a Analoji 60	[20] Alarm_Trip
[80] SL Digital Output A	[1] Etsa bocha	[29] [1665] Analoge Output 42	[21] Alarm_TripLock
6-93 Theminale 42 Sephetho Min	8-3* Litlhophiso tsa Port Port	[mA]	[22-25] Moetsisi 0-3
Sekala	8-30 Protocol	[30] [1668] Khafetsa. Kenyelletso 33 [Hz]	[26-29] LogicRule0-3
0.00-200.0% *0.00%	*[0] FC	[31] [1671] Relay Output [bin]	[33] DigitalInput_18
6-94 Theminale 42 Sephetho Max	[2] Modbus	[32] [1672] Counter A	[34] DigitalInput_19
Sekala	8-31 Aterese	[33] [1673] Counter B	[35] DigitalInput_27
0.00-200.0% *100.0%	1-247 *1	[34] [1690] Alarm Word	[36] DigitalInput_29
7-** Balaoli	8-32 FC Port Baud Sekhahla	[35] [1692] Lentsoe la Temoso	[38] DigitalInput_33
7-2* Tshebetso Ctrl. Feedb	[0] 2400 Baud	[36] [1694] Ext. Boemo ba Lentsoe	*[39] StartCommand
7-20 Tshebetso ea CL Feedback 1	[1] 4800 Baud	8-5 * Digital / Bese	[40] DriveStopped
Mohlodi	*[2] 9600 Baud Bakeng sa khetha FC	8-50 Lebopo la lewatle Khetha	13-02 Ema Ketsahalo
*[0] NoFunction	Bese ka 8-30	[0] DigitalInput	Sheba paramente 13-01 * [40]
[1] Maikutlo a Analog 53	*[3] 19200 Baud Bakeng sa ho khetha	[1] Bese	DriveStoppped
[2] Kenyelletso ea analoji 60	Modbus ka 8-30	[2] logicAnd	13-03 Hlahisa SLC bocha
[8] PulseInput33	[4] 38400 Baud	*[3] LogicOr	*[0] Se ke oa qala bocha
[11] LocalBusRef		8-51 Kgetha ho Emisa kapele	[1] Khutlisa SLC
7-3* Tshebetso PI		Sheba serapa. 8-50 * [3] LogicOr

13-1* Bapisanyi	13-52 SL Molaoli Ketso	14-22 Tshebetso Mokhoa	16-09 Custom Readout
13-10 Comparator Operand	*[0] E holofetse	*[0] Ts'ebetso e Tloaelehileng	Dep. ka ho lekana. 0-31, 0-32
*[0] E holofetse	[1] NoAction	[2] Ho qala 14-26 Ketso At	16-1* Motor Boemo
[1] Tšupiso	[2] KhethaSetup1	Inverter Phoso	16-10 Matla [kW]
[2] Maikutlo	[3] KhethaSetup2	*[0] Leeto	16-11 Matla [hp]
[3] MotorSpeed	[10-17] KhethaPresetRef0-7	[1] Tlhokomeliso 14-4 * Matla	16-12 Motor Moqtage [V]
[4] MotorCurrent	[18] SelectRamp1	Ho ntlafatsa	16-13 Khafetsa [Hz]
[6] MotorPower	[19] SelectRamp2	14-41 AEO Bonyane Magneti-	16-14 Motor Current [A]
[7] MotorVoltage	[22] Matha	sation	16-15 Khafetsa [%]
[8] DCLinkVoltage	[23] RunReverse	40–75 %*66 %	16-18 Motor Mocheso [%]
[12] AnalogInput53	[24] Emisa	14-9* Phoso Litlhophiso	16-3 * Boemo ba Drive
[13] AnalogInput60	[25] Qstop	14-90 Phoso boemo[3] Senotlolo sa Leeto	16-30 DC Link Voltage
[18] PulseInput33	[26] DCstop	[4] Leeto le liehile ho seta bocha	16-34 Mocheso sink Temp.
[20] AlamoNomoro	[27] Lebopo	15-** Khanna Boitsebiso	16-35 Inverter Mocheso
[30] CounterA	[28] FreezeOutput	15-0* Ho sebetsa Lintlha	16-36 Inv.Nom. Hona joale
[31] CounterB	[29] StartTimer0	15-00 Ho sebetsa Matsatsi	16-37 Inv. Max. Hona joale
13-11 Mofani oa Mofani	[30] StartTimer1	15-01 Lihora Tsa ho Tsamaisa	16-38 SL Molaoli Naha
[0] Ka tlase ho	[31] StartTimer2	15-02 kWh Counter	16-5* Ref./Feedb.
*[1] E batla e lekana	[32] Beha Digital Output A Tlaase	15-03 Power Ups	16-50 Tšupiso ea Kantle
[2] E kholo ho Feta	[33] Beha Digital Output B Tlaase	15-04 Fetile Nako	16-51 Pulse Reference
13-12 Boleng ba Papiso	[38] Beha Digital Output A Phahameng	15-05 Fetile Metsotso	16-52 Maikutlo [Yuniti]
-9999–9999 *0.0	[39] Beha Digital Output B Phahameng	15-06 Khutlisa kWh Counter	16-6* Lintho tse kenang
13-2* Lisebelisoa tsa nako	[60] ResetCounterA	*[0] Se ke oa qala bocha	16-60 Dijithale Kenyeletso 18,19,27,33
13-20 SL Molaoli Sebala nako	[61] ResetCounterB	[1] Seta k'haonte bocha	0-1111
0.0–3600 s *0.0 s	14-** E khethehileng Mesebetsi	15-07 Seta bocha Ho matha Lihora	16-61 Dijithale Kenyeletso 29
13-4* Maikutlo Melao	14-0* Inverter Ho fetoha	Counter	0-1
13-40 Maikutlo Molao Boolean 1	14-01 Phetoho Frequency	*[0] Se ke oa qala bocha	16-62 Analoge Kenyeletso 53 (volt)
Sheba serapa. 13-01 *[0] Bohata	[0] 2 kHz	[1] Seta k'haonte bocha	16-63 Analoge Kenyeletso 53 (hona joale)
[30] - [32] SL Nako ea ho tsoa 0-2	*[1] 4 kHz	15-3 * Lenane la Phoso	16-64 Analoge Kenyeletso 60
13-41 Maikutlo Molao Moetsi oa 1	[2] 8 kHz	15-30 Phoso Konteraka: Phoso Khoutu	16-65 Analoge Sephetho 42 [mA]
*[0] E holofetse	[4] 16 kHz ha e fumanehe bakeng sa M5	15-4 * Khanna Boitsebiso	16-68 Pulse Input [Hz]
[1] Mme	14-03 Overmodulation	Mofuta oa 15-40 FC	16-71 Relay Sephetho [bin]
[2] Kapa	[0] Tlosa	15-41 Karolo ea Matla	16-72 Counter A
[3] Empa ha ho joalo	*[1] Bula	15-42 Moqtage	16-73 Counter B
[4] Kapa che	14-1 * Tlhokomelo e kholo	15-43 Software Phetolelo	16-8 * Fieldbus / FC Port
[5] Che le	14-12 Mosebetsi at tse ka sehloohong	15-46 Khafetsa Mofetoleli	16-86 FC Boema-kepe REF 1
[6] Che kapa	ho se leka-lekane	Laela. Che	0x8000-0x7FFFF
[7] Che, eseng	*[0] Leeto	15-48 LCP Id No	16-9* Lithuto tsa Tlhahlobo
[8] Che kapa che	[1] Tlhokomeliso	15-51 Khafetsa Mofetoleli	16-90 Alamo Lentsoe
13-42 Maikutlo Molao Boolean 2	[2] E holofetse	Seriale Che	0-0XFFFFFFFF
Sheba serapa. 13-40 * [0] Bohata	14-2* Leeto Seta bocha	16-** Lintlha Tse baloang 16-0*	16-92 Lentswe la Temoso
13-43 Maikutlo Molao Moetsi oa 2	14-20 Mokhoa oa ho seta bocha	Kakaretso Boemo	0-0XFFFFFFFF
Sheba serapa. 13-41 *[0] Holofetse	*[0] Ho seta bocha ka letsoho	16-00 Laola Lentsoe	16-94 Ext. Boemo Lentsoe
13-44 Maikutlo Molao Boolean 3	[1-9] AutoReset 1-9	0-0XFFFF	0-0XFFFFFFFF
Sheba serapa. 13-40 * [0] Bohata	[10] AutoReset 10	16-01 Referense [Yuniti]	18-** Eketsehile Motor Lintlha
13-5* Linaha	[11] AutoReset 15	-4999–4999 *0.000	18-8* Motor Bahanyetsi
13-51 SL Molaoli Ketsahalo	[12] AutoReset 20	16-02 Referense %	18-80 Stator Khanyetso (Holimo
Sheba serapa. 13-40 *[0] Bohata	[13] Infinite auto reset	-200.0–200.0% *0.0%	qeto)
	[14] Khutlisa ha matla a ho nyoloha	16-03 Boemo ba Lentswe	0.000–99.990 ohm *0.000 ohm
	14-21 Nako ea ho Qala Botjha e Iketsetsang	0–0XFFFF	18-81 Stator Leakage
	0–600s * 10s	16-05 Boleng ba Bohlokoa [%]	Boitšoaro (Holimo qeto)
		-200.0–200.0% *0.0%	0.000–99.990 ohm *0.000 ohm

Ho batle phoso

Litemoso le Litlhokomeliso

Nomoro	Tlhaloso	Tlhokomediso	Alamo	Leeto Notlela	Phoso	Sesosa sa bothata
2	Phoso e hlahang hang hang	X	X			Letšoao ho terminal 53 kapa 60 le ka tlase ho 50% ea boleng bo behiloeng ho: •    parameter 6-10 Terminal 53 Low Voltage •    parameter 6-12 Terminal 53 Low Current •    parameter 6-22 Terminal 54 Low Current
4	Ho lahleheloa ha mekhahlelo ea mantlha1)	X	X	X		Karolo e sieo lehlakoreng la phepelo, kapa molumo o phahameng haholotage imbalance. Hlahloba phepelo voltage.
7	DC holim'a voltage1)	X	X			DC-link voltage feta moeli.
8	DC tlas'a voltage1)	X	X			DC-link voltage marotholi ka tlase ho voltage moeli oa temoso.
9	Inverter e tletse	X	X			Ho feta 100% mojaro ka nako e telele haholo.
10	Mocheso o feteletseng oa koloi ETR	X	X			Enjene e chesa haholo. Mojaro o fetile 100% ka nako e telele haholo.
11	Thermistor ea motlakase - peture	X	X			Khokahano ea thermistor kapa thermistor e khaotsoe.
12	Moeli oa torque	X				Torque e feta boleng bo behiloeng paramethareng efe kapa efe 4-16 Torque Moeli Mochini oa likoloi or Mokhoa oa jenereithara oa 4-17Torque Limit.
13	Overcurrent	X	X	X		Tekanyetso ea hona joale ea inverter e fetisitsoe.
14	Phoso e fatshe	X	X	X		Phallo ho tloha maemong a tlhahiso ho ea fatše.
16	Potoloho e Khutšoane		X	X		Potoloho e khuts'oane ea enjene kapa liteisheneng tsa makoloi.
17	Laola nako ea ho tsoa ha mantsoe	X	X			Ha ho puisano ho frequency converter.
25	Brake resistor e khutsufalitsoe		X	X		Brake resistor e na le potoloho e khuts'oane, ka hona ts'ebetso ea brake ke hakolla.
27	Brake chopper e khuts'oane		X	X		Brake transistor e na le potoloho e khuts'oane, ka hona ts'ebetso ea brake ke hakolla.
28	Brake check		X			Brake resistor ha e hokahane/e sebetsa.
29	Boto ea matla holim'a mocheso	X	X	X		Thempereichara ea ho khaola sink ea mocheso e fihletsoe.
30	Motor phase U e sieo		X	X		Motor phase U ha e eo. Sheba mohato.
31	Motor phase V ha e eo		X	X		Motor phase V ha e eo. Sheba mohato.
32	Motor phase W ha e eo		X	X		Motor phase W ha e eo. Sheba mohato.
38	Phoso e ka hare		X	X		Ikopanye le morekisi oa lehae oa Danfoss.
44	Phoso e fatshe		X	X		Phallo ho tloha maemong a tlhahiso ho ea fatše.
47	Taolo VoltagPhoso		X	X		24 V DC e tletse.
51	AMA hlahloba Unom le Inom		X			Boemo bo fosahetseng ba motlakase oa voltage le/kapa motlakase oa motlakase.
52	AMA e tlase Inom		X			Motlakase oa motlakase o tlase haholo. Sheba litlhophiso.
59	Moeli oa hajoale	X				Khafetsa converter overload.
63	Mechanical Brake Low		X			Nako ea 'nete ea motlakase ha e e-so fete brake ea tokollo. hona joale ka har'a fensetere ea ho lieha ha nako ea ho qala.
80	Frequency Converter e qalile ho Boleng ba kamehla		X			Litlhophiso tsohle tsa parametha li qalisoa ho li-setting tsa kamehla.
84	Khokahano lipakeng tsa frequency converter le LCP ke lahlehileng				X	Ha ho puisano lipakeng tsa LCP le frequency converter.
85	Senotlolo se koetsoe				X	Sheba sehlopha sa parameter 0-4* LCP.
86	E hlolehile ho kopitsa				X	Phoso e etsahetse ha ho kopitsoa ho tloha frequency converter ho ea LCP, kapa ho tloha LCP ho ea ho frequency converter.
87	Lintlha tsa LCP ha li sebetse				X	E etsahala ha o kopitsa ho tsoa ho LCP haeba LCP e na le phoso data - kapa haeba ho se na data e kentsoeng ho LCP.

88	Lintlha tsa LCP ha li tsamaisane				X	E etsahala ha o kopitsa ho LCP haeba data e tsamaisitsoe lipakeng tsa li-frequency converter tse nang le phapang e kholo ho software liphetolelo.
89	E baloang feela ka parametha				X	Sena se etsahala ha u leka ho ngolla paramethara ea ho bala feela.
90	Li-database tsa parameter li ntse li sebetsa				X	Khokahano ea LCP le RS485 e leka ho nchafatsa liparamente ka nako e le nngwe.
91	Boleng ba paramethara ha bo sebetse ho mokhoa ona				X	Sena se etsahala ha u leka ho ngola boleng bo seng molaong ho parameter.
92	Theko ea parameter e feta ea min/max meeli				X	E etsahala ha o leka ho beha boleng ka ntle ho mefuta.
nw matha	Eseng Ha a ntse a Runnin				X	Li-parameter li ka fetoloa feela ha motlakase o emisoa.
Phoso.	Phasewete e fosahetseng e ne e le kena				X	E etsahala ha o sebelisa phasewete e fosahetseng ho fetola a parameter e sirelelitsoeng ka password.
1) Liphoso tsena li bakoa ke liphoso tse kholo. Kenya sefe ea mohala oa Danfoss ho lokisa bothata bona.

Litlhaloso

Phepelo ea Mains 1×200–240 V AC

Tloaelehileng overload 150% bakeng sa motsotso o le 1
Frequency converter Sehlahisoa se tloaelehileng sa shaft [kW]	PK25 0.25	PK37 0.37	PK75 0.75	P1K5 1.5	P2K2 2.2	P3K7 3.7
Tlhahiso e tloaelehileng ea shaft [hp]	0.33	0.5	1	2	3	5
Tekanyetso ea ts'ireletso ea letlapa IP20	M1	M1	M1	M2	M3	M3
Sephetho jwale
E tswelapele (3×200–240 V) [A]	1.5	2.2	4.2	6.8	9.6	15.2
Nakoana (3×200–240 V) [A]	2.3	3.3	6.3	10.2	14.4	22.8
Boholo ba boholo ba cable:
(Mantsiboea, enjene) [mm2/AWG]	4/10
Boholo kenya letsoho jwale
E tswelapele (3×200–240 V) [A]	2.4	3.5	6.7	10.9	15.4	24.3
Nakoana (3×200–240 V) [A]	3.2	4.6	8.3	14.4	23.4	35.3
Boholo ba li-fuse tsa mantlha [A]	Bona khaolo 1.3.3 Li-fuse
Tikoloho
Khakanyo ea tahlehelo ea matla [W] Boemo bo botle ka ho fetisisa/e tloaelehileng1)	14.0/ 20.0	19.0/ 24.0	31.5/ 39.5	51.0/ 57.0	72.0/ 77.1	115.0/ 122.8
Sebaka sa boima ba 'mele IP20 [kg]	1.1	1.1	1.1	1.6	3.0	3.0
E ciency [%] Boemo bo botle ka ho fetisisa/e tloaelehileng2)	96.4/ 94.9	96.7/ 95.8	97.1/ 96.3	97.4/ 97.2	97.2/ 97.4	97.3/ 97.4

Lethathamo la 1.6 Mains Supply 1×200–240 V AC

1. E sebetsa bakeng sa dimensioning ea frequency converter cooling. Haeba maqhubu a switching a phahame ho feta a kamehla, tahlehelo ea motlakase e ka 'na ea
   nyollelo. LCP le tšebeliso e tloaelehileng ea matla a karete ea ho laola li kenyelelitsoe. Bakeng sa data ea tahlehelo ea matla ho latela EN 50598-2, sheba ho www.anopela.com/ Vltenergy e sebetsang hantle.
2. Ho sebetsa hantle ho lekanyetsoa ka nako ea lebitso. Bakeng sa sehlopha sa tšebeliso ea matla, sheba Khaolo ea 1.8.1 Potoloho. Bakeng sa tahlehelo ea karolo e itseng, bona www.anopela.com/ matla a matla.

Phepelo ea Mains 3×200–240 V AC

1. E sebetsa bakeng sa dimensioning ea frequency converter cooling. Haeba maqhubu a ho fetoha a phahame ho feta a kamehla, tahlehelo ea motlakase e ka eketseha. LCP le tšebeliso e tloaelehileng ea matla a karete ea ho laola li kenyelelitsoe. Bakeng sa data ea tahlehelo ea matla ho latela EN 50598 2, sheba ho www.anopela.com/ katleho ea vitenergy.
2. Ho sebetsa hantle ho lekanyetsoa ka nako ea lebitso. Bakeng sa sehlopha sa tšebeliso ea matla, sheba Khaolo ea 1.8.1 Potoloho. Bakeng sa tahlehelo ea karolo e itseng, bona www.anopela.com/ Ho sebetsa hantle ha VItenergy.

Phepelo ea Mains 3×380–480 V AC

Tloaelehileng overload 150% bakeng sa motsotso o le 1
Frequency converter Sehlahisoa se tloaelehileng sa shaft [kW]	PK37 0.37	PK75 0.75	P1K5 1.5	P2K2 2.2	P3K0 3.0	P4K0 4.0
Tlhahiso e tloaelehileng ea shaft [hp]	0.5	1	2	3	4	5.5
Tekanyetso ea ts'ireletso ea letlapa IP20	M1	M1	M2	M2	M3	M3
Sephetho jwale
E tswelapele (3×380–440 V) [A]	1.2	2.2	3.7	5.3	7.2	9.0
Nakoana (3×380–440 V) [A]	1.8	3.3	5.6	8.0	10.8	13.7
E tswelapele (3×440–480 V) [A]	1.1	2.1	3.4	4.8	6.3	8.2
Nakoana (3×440–480 V) [A]	1.7	3.2	5.1	7.2	9.5	12.3
Boholo ba boholo ba cable:
(Mantsiboea, enjene) [mm2/AWG]	4/10
Boholo kenya letsoho jwale
E tswelapele (3×380–440 V) [A]	1.9	3.5	5.9	8.5	11.5	14.4
Nakoana (3×380–440 V) [A]	2.6	4.7	8.7	12.6	16.8	20.2
E tswelapele (3×440–480 V) [A]	1.7	3.0	5.1	7.3	9.9	12.4
Nakoana (3×440–480 V) [A]	2.3	4.0	7.5	10.8	14.4	17.5
Boholo ba li-fuse tsa mantlha [A]	Bona khaolo 1.3.3 Li-fuse
Tikoloho
Khakanyo ea tahlehelo ea matla [W] Boemo bo botle ka ho fetisisa/e tloaelehileng1)	18.5/ 25.5	28.5/ 43.5	41.5/ 56.5	57.5/ 81.5	75.0/ 101.6	98.5/ 133.5
Sebaka sa boima ba 'mele IP20 [kg]	1.1	1.1	1.6	1.6	3.0	3.0
E ciency [%] Boemo bo botle ka ho fetisisa/e tloaelehileng2)	96.8/ 95.5	97.4/ 96.0	98.0/ 97.2	97.9/ 97.1	98.0/ 97.2	98.0/ 97.3

Lethathamo la 1.8 Mains Supply 3×380–480 V AC

Tloaelehileng overload 150% bakeng sa motsotso o le 1
Frequency converter Sehlahisoa se tloaelehileng sa shaft [kW]	P5K5 5.5	P7K5 7.5	P11K 11	P15K 15	P18K 18.5	P22K 22
Tlhahiso e tloaelehileng ea shaft [hp]	7.5	10	15	20	25	30
Tekanyetso ea ts'ireletso ea letlapa IP20	M3	M3	M4	M4	M5	M5
Sephetho jwale
E tswelapele (3×380–440 V) [A]	12.0	15.5	23.0	31.0	37.0	43.0
Nakoana (3×380–440 V) [A]	18.0	23.5	34.5	46.5	55.5	64.5
E tswelapele (3×440–480 V) [A]	11.0	14.0	21.0	27.0	34.0	40.0
Nakoana (3×440–480 V) [A]	16.5	21.3	31.5	40.5	51.0	60.0
Boholo ba boholo ba cable:
(Mantsiboea, enjene) [mm2/AWG]	4/10		16/6
Boholo kenya letsoho jwale
E tswelapele (3×380–440 V) [A]	19.2	24.8	33.0	42.0	34.7	41.2
Nakoana (3×380–440 V) [A]	27.4	36.3	47.5	60.0	49.0	57.6
E tswelapele (3×440–480 V) [A]	16.6	21.4	29.0	36.0	31.5	37.5
Nakoana (3×440–480 V) [A]	23.6	30.1	41.0	52.0	44.0	53.0
Boholo ba li-fuse tsa mantlha [A]	Bona khaolo 1.3.3 Li-fuse
Tikoloho
Khakanyo ea tahlehelo ea matla [W] Boemo bo botle ka ho fetisisa/e tloaelehileng1)	131.0/ 166.8	175.0/ 217.5	290.0/ 342.0	387.0/ 454.0	395.0/ 428.0	467.0/ 520.0
Sebaka sa boima ba 'mele IP20 [kg]	3.0	3.0
E ciency [%] Boemo bo botle ka ho fetisisa/e tloaelehileng2)	98.0/ 97.5	98.0/ 97.5	97.8/ 97.4	97.7/ 97.4	98.1/ 98.0	98.1/ 97.9

Lethathamo la 1.9 Mains Supply 3 × 380-480 V AC

1. E sebetsa bakeng sa dimensioning ea frequency converter cooling. Haeba maqhubu a ho fetoha a phahame ho feta a kamehla, tahlehelo ea motlakase e ka eketseha. LCP le tšebeliso e tloaelehileng ea matla a karete ea ho laola li kenyelelitsoe. Bakeng sa data ea tahlehelo ea matla ho latela EN 50598-2, sheba ho www.anopela.com/ Ho sebetsa hantle ha VItenergy.
2. Bokhoni bo lekantsoeng ka nako ea lebitso. Bakeng sa sehlopha sa tšebeliso ea matla, sheba Khaolo ea 1.8.1 Potoloho. Bakeng sa tahlehelo ea karolo e itseng, bona www.anopela.com/ Ho sebetsa hantle ha VItenergy.

Lintlha tse akaretsang tsa tekheniki

Tšireletso le likarolo

• Tšireletso ea mocheso oa motlakase oa motlakase khahlanong le boima bo feteletseng.
• Tlhokomelo ea mocheso oa sinki ea mocheso e netefatsa hore mochini o fetolelang khafetsa oa tsamaea haeba ho na le mocheso o feteletseng.
• Mofetoleli oa maqhubu o sirelelitsoe khahlanong le lipotoloho tse khutšoane lipakeng tsa liteishene tsa motor U, V, W.
• Ha motor phase e le sieo, frequency converter ea tsamaea ebe e ntša alamo.
• Ha karolo ea mains e le sieo, sesebelisoa sa frequency converter sea tsamaea kapa se fana ka temoso (ho ipapisitse le mojaro).
• Tlhokomelo ea DC-link voltage etsa bonnete ba hore frequency converter e tsamaea ha DC-link voltage tlase haholo kapa e phahame haholo.
• Mofetoleli oa maqhubu o sirelelitsoe khahlanong le liphoso tsa fatše liteisheneng tsa makoloi U, V, W.

Phepelo ea mantlha (L1/L, L2, L3/N)

• Phepelo voltage 200–240 V ±10%
• Phepelo voltage 380–480 V ±10%
• Khafetsa ea phepelo 50/60 Hz
• Ho se leka-lekane ho hoholo ha nakoana lipakeng tsa mekhahlelo ea mantlha ea 3.0% ea matla a phepelo a reriloengtage
• Ntho ea 'nete ea matla ≥0.4 ka lebitso la moroalo o lekantsoeng
• Displacement power factor (cosφ) haufi le bonngoe (>0.98)
• Fetolela phepelo ea ho kenya L1/L, L2, L3/N (matla a holimo) Boholo makhetlo a 2/ motsotso
• Tikoloho ho latela EN60664-1 Overvoltage mokhahlelo oa III/ tekanyo ea tšilafalo 2

Yuniti e loketse ho sebelisoa potolohong e khonang ho fana ka li-symmetrical tse sa feteng 100000 RMS. Amperes, 240/480 V boholo.

Motlakase (U, V, W)

• Sephetho voltage 0–100% ea phepelo voltage
• Khafetsa ea tlhahiso 0–200 Hz (VVC+), 0–400 Hz (u/f)
• Ho bulela sephetho sa Unlimited
• Ramp linako tse 0.05–3600 s

Bolelele ba cable le cross-section

• Bolelele ba thapo e kholo, e sirelelitsoeng/e nang le lihlomo (EMC-kenyo e nepahetseng) 15 m (49 ft)
• Bolelele ba thapo ya enjene e phahameng, e sa sireletswang/e sa sireletswang dimetara tse 50 (164 ft) Boholo ba karolo e fetang ho enjene, mains1)
• Khokahano ea ho arolelana / brake (M1, M2, M3) 6.3 mm li-plug tse insulated tsa Faston
• Karolo e kholo ea ho arolelana / brake (M4, M5) 16 mm2/6 AWG
• Boholo ba karolo ea ho tšela li-terminals, terata e thata 1.5 mm2/16 AWG (2×0.75 mm2)
• Karolo e kholo ea ho laola li-terminals, íexible cable 1 mm2/18 AWG
• Karolo e kholo ea ho laola li-terminals, thapo e nang le konokono e kentsoeng 0.5 mm2/20 AWG
• Bonyane ba karolo e fapaneng ho laola li-terminals 0.25 mm2 (24 AWG)

Sheba khaolo ea 1.7 Litlhaloso bakeng sa lintlha tse ling.

Kenyelletso ea dijithale (lisebelisoa tsa molumo oa motlakase / khouto)

• Lisebelisoa tsa dijithale tse ka reroang (pulse/encoder) 5 (1)
• Linomoro tsa terminal 18, 19, 27, 29, 33
• Logic PNP kapa NPN
• Moqtage boemong ba 0–24 V DC
• Moqtage level, logic 0 PNP <5 V DC
• Moqtage level, logic 1 PNP >10 V DC
• Moqtage level, logic 0 NPN >19 V DC
• Moqtage level, logic 1 NPN <14 V DC
• Boholo voltage ho kenya letsoho 28 V DC
• Ho hanyetsa ho kenya, Ri Hoo e ka bang 4000 Ω
• Boholo ba maqhubu a pulse ho terminal 33 5000 Hz

Lisebelisoa tsa analoge

• Palo ea lisebelisoa tsa analoge 2
• Nomoro ea terminal 53
• Moqtage mode (terminal 53) Switch S200=OFF(U)
• Mokhoa oa hajoale (terminal 53 le 60) Switjha S200=ON(I)
• MoqtagBoemo ba 0-10 V
• Ho hanyetsa ho kenya, Ri Hoo e ka bang 10000 Ω
• Boholo voltage 20v
• Boemo ba hajoale 0/4 ho isa ho 20 mA (e leka-lekaneng)
• Ho hanyetsa ho kenya, Ri Hoo e ka bang 200 Ω
• Boholo ba hona joale ke 30 mA

Sephetho sa Analog

• Palo ea liphetho tsa analoge tse hlophisitsoeng 1
• Nomoro ea terminal 42
• Sebaka sa hajoale se hlahisoang ke analoge 0/4–20 mA
• Boholo ba mojaro ho ba bo tloaelehileng ho tlhahiso ea analoge 500 Ω
• Boholo voltage ho tlhahiso ea analoge 17 V
• Ho nepahala ha tlhahiso ea analog Phoso e kholo: 0.8% ea sekala se felletseng
• Nako ea ho hlahloba 4 ms
• Qeto mabapi le tlhahiso ea analog 8 bit
• Nako ea ho hlahloba 4 ms

Karete ea taolo, puisano ea serial ea RS485

• Nomoro ea terminal 68 (P, TX+, RX+), 69 (N, TX-, RX-)
• Nomoro ea terminal 61 E tloaelehileng bakeng sa li-terminals 68 le 69

Karete ea taolo, tlhahiso ea 24 V DC

• Nomoro ea terminal 12
• Boholo ba mojaro (M1 le M2) 100 mA
• Boholo ba mojaro (M3) 50 mA
• Boholo ba mojaro (M4 le M5) 80 mA

Tlhahiso ea relay

• Relay e ka hlahisoang 1
• Relay 01 nomoro ea mohala 01-03 (khefu), 01-02 (etsa)
• Boholo bo phahameng ba thepa (AC-1)1) ho 01-02 (NO) (Resistive load) 250 V AC, 2 A
• Boholo bo phahameng ba thepa (AC-15)1) ho 01-02 (NO) (Inductive load @ cosφ 0.4) 250 V AC, 0.2 A
• Boholo bo phahameng ba thepa (DC-1)1) ka 01-02 (NO) (Resistive load) 30 V DC, 2 A
• Boholo bo phahameng ba thepa (DC-13)1) ka 01-02 (NO) (Inductive load) 24 V DC, 0.1 A
• Boholo bo phahameng ba thepa (AC-1)1) ho 01-03 (NC) (Resistive load) 250 V AC, 2 A
• Boholo bo phahameng ba thepa (AC-15)1) ho 01-03 (NC) (Inductive load @ cosφ 0.4) 250 V AC, 0.2 A
• Boholo bo phahameng ba thepa (DC-1)1) ka 01-03 (NC) (Resistive load) 30 V DC, 2 A
• Bonyane botlaaseng ba terminal ho 01-03 (NC), 01-02 (NO) 24 V DC 10 mA, 24 V AC 20 mA
• Tikoloho ho latela EN 60664-1 Overvoltage mokhahlelo oa III/ tekanyo ea tšilafalo 2
• IEC 60947 karolo ea 4 le 5

Karete ea taolo, tlhahiso ea 10 V DC

• Nomoro ea terminal 50
• Sephetho voltage 10.5 V ±0.5 V
• Boholo ba mojaro 25 mA

TSEBISO
Lintho tsohle tse kenang, tse hlahisoang, li-circuits, lisebelisoa tsa DC, le likhokahano tse fetisetsoang li arotsoe ka mokhoa o ikhethileng ho tsoa ho phallo ea phepelo.tage (PELV) le tse ling tse phahameng-voltage boemelong.

Libaka tse pota-potileng

• Tekanyetso ea ts'ireletso ea letlapa IP20
• Setsi sa kandelare se fumaneha IP21, TYPE 1
• Teko ea ho sisinyeha 1.0 g
• Mongobo o phahameng o lekanyelitsoeng 5% -95 % (IEC 60721-3-3; Sehlopha sa 3K3 (ha se condensing) nakong ea ts'ebetso
• Tikoloho e mabifi (IEC 60721-3-3), sehlopha se koahetsoeng sa 3C3
• Mokhoa oa teko ho latela IEC 60068-2-43 H2S (matsatsi a 10)
• Thempereichara e tikolohong1) Boholo ba 40 °C (104 °F)
• Mocheso o fokolang oa mocheso nakong ea ts'ebetso e felletseng 0 °C (32 °F)
• Mocheso o fokolang oa mocheso mosebetsing o fokotsehileng -10 °C (14 °F)
• Mocheso nakong ea polokelo / lipalangoang -25 ho +65/70 °C
• Bophahamo bo phahameng ka holim'a bophahamo ba leoatle ntle le derating1) 1000 m (3280 ft)
• Bophahamo bo phahameng ka holim'a bophahamo ba leoatle ka derating1) 3000 m (9842 ft)
• Maemo a polokeho EN/IEC 61800-5-1, UL 508C
• Litekanyetso tsa EMC, Emission EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
• Litekanyetso tsa EMC, Immunity
• EN 61800-3, EN 61000-6-1/2, EN 61000-4-2, EN 61000-4-3,
• EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
• Eiciency ea matla sehlopha sa IE2

1. Sheba khaolo ea 1.9 Maemo a khethehileng a:
   • Derating bakeng sa mocheso o phahameng oa tikoloho.
   • Derating bakeng sa bophahamo bo phahameng.
2. E khethiloe ho latela EN 50598-2 ho:
   • Moroalo o lekantsoeng.
   • 90% e lekantsoe khafetsa.
   • Ho fetola litlhophiso tsa feme ea maqhubu.
   • Ho fetola sebopeho sa fektheri ea mohlala.

Maemo a Khethehileng

Ho fokotseha ka lebaka la Mocheso o Tletseng
Thempereichara ea tikoloho e lekantsoeng ka lihora tse 24 e lokela ho ba bonyane 5 °C ho feta mocheso o phahameng oa tikoloho. Haeba converter ea maqhubu e sebetsa ka mocheso o phahameng oa mocheso, fokotsa tlhahiso e tsoelang pele ea hona joale.Mofetoleli oa maqhubu o etselitsoe hore o sebetse ka mocheso o phahameng oa 50 °C ka boholo ba motlakase o le mong o monyenyane ho feta lebitso. Ts'ebetso e tsoelang pele ka mojaro o felletseng ho 1 °C mocheso oa tikoloho e fokotsa bophelo bohle ba converter ea maqhubu.

Ho fokotsa khatello ea moea e tlase
Bokhoni ba ho pholisa moea bo fokotseha ka khatello e tlase ea moea.

TLHOKOMELO

KEMELO PHAHAMENG
Bakeng sa bophahamo bo kaholimo ho 2000 m (6560 ft), ikopanye le Danfoss mabapi le PELV. Ka tlase ho 1000 m (3280 ft) bophahamo, ha ho hlokahale hore ho fokotsoe, empa ka holimo ho 1000 m (3280 ft), fokotsa mocheso o potolohileng kapa boholo ba tlhahiso ea hona joale. Fokotsa tlhahiso ka 1% ho bophahamo ba limithara tse 100 (328 ft) ka holimo ho 1000 m (3280 ft), kapa fokotsa mocheso o phahameng ka ho fetisisa oa 1 °C ho 200 m (656 ft).

Derating bakeng sa ho matha ka lebelo le tlase
Ha enjene e hokahantsoe le frequency converter, hlahloba hore na ho pholile ha enjene ho lekane. Bothata bo ka hlaha ka lebelo le tlase lits'ebetsong tsa torque khafetsa. Ho matha u sa phetse ka lebelo le tlase - ka tlase ho halofo ea lebelo la enjene - ho ka hloka hore moea o pholile haholoanyane. Ntle le moo, khetha enjene e kholoanyane (ka boholo ba 1).

Danfoss e ke ke ea amohela boikarabello bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lintho tse ling tse hatisitsoeng. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse seng li ntse li laetsoe hafeela liphetoho tse joalo li ka etsoa ntle le liphetoho tse latelang tse hlokahalang ho latela litlhaloso tse seng li lumellane. Matšoao ohle a khoebo a thepa ena ke thepa ea lik'hamphani tse amehang. Danfoss le mofuta oa logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

• • Danfoss A / S
  • Lintlha tsa 1
  • DK-6300 Graasten
  • vlt-drives.danfoss.com

Litokomane / Lisebelisoa

Danfoss MG02BB4P Vlt Micro Drive Power Chain Lengolo [pdf] Bukana ea Mosebelisi MG02BB4P Vlt Micro Drive Power Chain Scripture, MG02BB4P, Vlt Micro Drive Power Chain Scripture, Micro Drive Power Chain Scripture, Drive Power Chain Scripture, Power Chain Scripture, Chain Scripture, Scripture

Litšupiso

• Bukana ea Mosebelisi