CO2 Module Controller Universal Gateway
Bukana ea Mosebelisi
Ho kenya Motlakase
Ka tlase ke papiso ea likhokahano tsa kantle tse ka etsoang kopanong ea remote control.
Phepelo ea motlakase ho CDU
230V AC 1,2m cable bakeng sa sena e kenyelelitsoe.
Hokela thapo ea phepelo ea motlakase ea Module ho L1 (theminale e ka ho le letšehali) le N (terminal e ka ho le letona) ea phanele ea taolo ea yuniti e khutsufatsang - matla
phepelo terminal block
Tlhokomeliso: Haeba thapo e hloka ho nkeloa sebaka, e tlameha ho ba bopaki ba potoloho e khuts'oane kapa e tlameha ho sireletsoa ka fuse ka lehlakoreng le leng.
RS485-1
Sehokelo sa Modbus bakeng sa khokahano ho Motsamaisi oa Sisteme
RS485-2
Sehokelo sa Modbus bakeng sa khokahano ho CDU.
1,8 m cable bakeng sa sena e kenyelelitsoe.
Hokela thapo ena ea RS485-2 Modbus ho terminal A le B ea phanele ea taolo ea yuniti e khutsufatsang - block terminal ea Modbus interface. U se ke ua kopanya thebe e sirelelitsoeng fatše 
RS485-3
Sehokelo sa Modbus bakeng sa ho hokahana le balaoli ba evaporator
3x Tlhaloso ea Mosebetsi oa LED
- Blue led e ON ha CDU e hokahane 'me ts'ebetso ea likhetho e felile
- Led e khubelu e ea benya ha ho na le phoso ea puisano le molaoli oa evaporator
- Led e tala e ea benya nakong ea puisano le se laolang mouoane LED e tala haufi le li-terminals tsa 12V tsa phepelo ea motlakase e bonts'a "Power OK".
Lerata la motlakase
Lithapo tsa puisano ea data li tlameha ho bolokoa li arohane le lithapo tse ling tsa motlakase:
- Sebelisa literei tsa cable tse arohaneng
- Boloka sebaka se pakeng tsa likhoele bonyane 10 cm.
Ho kenya Mechine
- Ho kengoa ka morao ho yuniti / ka morao ea e-phanele e nang le li-rivets kapa li-screw tse fanoeng (ho fanoe ka masoba a 3 a ho kenya)
Mokhoa:
- Tlosa phanele ea CDU
- Kenya borakete ka li-screw kapa li-rivets tse fanoeng
- Lokisa e-Box bracket (li-screw tse 4 li fanoe)
- Tsamaisa 'me u hokele lithapo tse fanoeng tsa Modbus le phepelo ea motlakase phanele ea taolo ea CDU
- Tsamaisa 'me u hokele thapo ea mouoane oa Modbus ho selaoli sa Mojule
- Khetho: Tsamaisa 'me u hokele thapo ea Modbus ea Motsamaisi oa Sistimi ho molaoli oa Module
Ho kenya ka boikhethelo ka lehlakoreng le ka pele (feela bakeng sa yuniti ea 10HP, haufi le phanele ea taolo ea CDU, masoba a lokelang ho chekoa)
Mokhoa:
- Tlosa phanele ea CDU
- Kenya borakete ka li-screw kapa li-rivets tse fanoeng
- Lokisa e-Box bracket (li-screw tse 4 li fanoe)
- Tsamaisa 'me u hokele lithapo tse fanoeng tsa Modbus le phepelo ea motlakase phanele ea taolo ea CDU
- Tsamaisa 'me u hokele thapo ea mouoane oa Modbus ho selaoli sa Mojule
- Khetho: Tsamaisa 'me u hokele thapo ea Modbus ea Motsamaisi oa Sistimi ho molaoli oa Mojule
Module Controller wiring
Ke kopa o kenye thapo ea puisano ho tloha ka holimo ho moeli oa taolo ho ea ka lehlakoreng le letšehali. Cable e tla hammoho le molaoli oa module.
Ka kopo fetisa thapo ea motlakase ka har'a insulation e ka tlase ho lebokose la taolo.
Hlokomela:
Lithapo li lokela ho ts'oaroa ka maqhama a lithapo 'me ha lia lokela ho ama baseplate ho qoba ho kenella ha metsi.
Lintlha tsa tekheniki
| Phepelo voltage | 110-240 V AC. 5 VA, 50 / 60 Hz |
| Pontšo | LED |
| Khokelo ea motlakase | Phepelo ea matla: Max.2.5 mm2 Puisano: Max 1.5 mm2 |
| -25 — 55 °C, Nakong ea ts'ebetso -40 - 70 °C, Nakong ea lipalangoang | |
| 20 - 80% RH, ha e fokotsehe | |
| Ha ho tsusumetso e tšosang | |
| Tshireletso | IP65 |
| Ho phahamisa | Lebota kapa le nang le bracket e kenyellelitsoeng |
| Boima ba 'mele | TBD |
| E kenyelelitsoe ka har'a sephutheloana | 1 x Kopano ea taolo e hole 1 x Bracket e kenyang 4 x M4 screws 5 x Inox rivets 5 x Likurufu tsa tšepe tsa pampiri |
| Litumello | EC Low Voltage Taelo (2014/35/EU) - EN 60335-1 EMC (2014/30/EU) - EN 61000-6-2 le 6-3 |
Litekanyo
Diyuniti ka mm
Likarolo tsa tlatsetso
| Litlhoko tsa Danfoss | |||||||
| Likarolo Lebitso | Likarolo No | Gross boima |
Boholo ba Yuniti (mm) | Mokhoa oa ho paka | Litlhaloso | ||
| Kg | Bolelele | Bophara | Bophahamo | ||||
CO2 MODULE MOLAOLI MOLAOLI OA BOKAHOHLENG
| MODULE MOLAOLI | 118U5498 | TBD | 182 | 90 | 180 | Lebokose la lebokose |
Tshebetso
Pontšo
Litekanyetso li tla bontšoa ka linomoro tse tharo.
 |
Alamo e sebetsang (kgutlotharo e kgubedu) |
| Skena bakeng sa Evap. selaoli se ntse se tsoela pele (oache e mosehla) |
Ha u batla ho fetola tlhophiso, konopo e ka holimo le e ka tlaase e tla u fa boleng bo holimo kapa bo tlaase ho latela konopo eo u e tobang. Empa pele o fetola boleng, o tlameha ho fihlella ho menu. U fumana sena ka ho tobetsa konopo e kaholimo metsotsoana e 'maloa - ebe u kenya kholomo ka likhoutu tsa paramethara. Fumana khoutu ea parameter eo u batlang ho e fetola 'me u tobetse li-buttons tse bohareng ho fihlela boleng ba parameter bo bontšoa. Ha o fetotse boleng, boloka boleng bo bocha ka ho tobetsa konopo e bohareng hape. (Haeba e sa sebetsoe ka metsotsoana e 10, ponts'o e tla fetoha ho bonts'a khatello e monyang mocheso).
Examphanyane:
Seta menu
- Tobetsa konopo e ka holimo ho fihlela khoutu ea paramethara r01 e bonts'oa
- Tobetsa konopo e ka holimo kapa e ka tlaase 'me u fumane parameter eo u batlang ho e fetola
- Tobetsa konopo e bohareng ho fihlela boleng ba parameter bo bonts'oa
- Tobetsa konopo e ka holimo kapa e tlase ebe u khetha boleng bo bocha
- Tobetsa konopo e bohareng hape ho emisa boleng.
Sheba khoutu ea alamo
Tobetsa e khutšoanyane ea konopo e ka holimo
Haeba ho na le likhoutu tse 'maloa tsa alamo li fumaneha ka har'a stack.
Tobetsa konopo e ka holimo-holimo kapa e tlase ho feta ho skena stack.
Beha ntlha
- Tobetsa konopo e ka holimo ho fihlela pontšo e bontša khoutu ea menu ea parameter r01
- Khetha 'me u fetole para. r28 ho isa ho 1, e hlalosang MMILDS UI e le sesebelisoa sa sete ea litšupiso
- Khetha 'me u fetole palo. r01 ho sebaka se hlokahalang sa khatello e tlase e behiloeng ka har'a bar(g)
- Khetha 'me u fetole palo. r02 ho fihla moo ho hlokahalang khatello e kaholimo ho setpoint target in bar(g)
Keletso: Bohareng ba lipalo tsa r01 le r02 ke khatello ea sepheo sa ho hula.
Qala hantle
Ka mokhoa o latelang o ka qala taolo kapele kamoo ho ka khonehang.
- Hokela puisano ea modbus ho CDU.
- Hokela puisano ea modbus ho li-evaporator controller.
- Lokisa aterese ho selaoli se seng le se seng sa mouoane.
- Etsa tlhahlobo ea marang-rang ho molaoli oa mojule (n01).
- Netefatsa hore tsohle lia fetoha. balaoli ba fumanoe (Io01-Io08).
- Bula parameter r12 'me u qale molao.
- Bakeng sa ho hokahanya le Danfoss System Manager
- Hokela puisano ea modbus
- Beha aterese ka paramethara o03
- Etsa skena ho Motsamaisi oa Sisteme.
Tlhahlobo ea mesebetsi
| Mosebetsi | Paramethara | Litlhaloso |
| Pontsho e tlwaelehileng | ||
| Pontšo e bonts'a khatello ea ho hula mochesong. | ||
| Taolo | ||
| Min. Khatello Sebaka se tlase sa khatello ea ho hula. Sheba litaelo tsa CDU. |
r01 | |
| Max. Khatello Sebaka se ka holimo se behiloeng bakeng sa khatello ea ho hula. Sheba litaelo tsa CDU. |
r02 | |
| Ts'ebetso ea Batla E fokotsa lebelo la compressor ea CDU. Sheba litaelo tsa CDU. |
r03 | |
| Mokhoa o Khutsitseng Dumella/thibela mokgwa wa ho kgutsa. Lerata le sebetsang le hatelloa ka ho fokotsa lebelo la fan le compressor ea kantle. |
r04 | |
| Tšireletso ea Lehloa Numella/thibela ts'ebetso ea ts'ireletso ea lehloa. E le ho thibela lehloa hore le se ke la phahama holim'a fene ea ka ntle nakong ea mariha a koaletsoeng, fene ea ka ntle e sebelisoa ka linako tse ling ho tlosa lehloa. |
r05 | |
| Main Switch Start/Emisa CDU | r12 | |
| Mohloli oa litšupiso CDU e ka sebelisa litšupiso tse hlophisitsoeng ka li-switches tsa rotary ho CDU, kapa e ka sebelisa referense joalo ka ha e hlalosoa ke paramethara r01 le r02. Paramethara ena e hlophisa hore na ho sebelisoa eng. |
r28 | |
| Bakeng sa Danfoss Feela | ||
| SH Molebeli ALC Moeli oa ho khaola bakeng sa taolo ea ALC (ho hlaphoheloa ha oli) |
r20 | |
| SH Qala ALC Moeli oa ho fokotsa ho laola ALC (ho hlaphoheloa ha oli) |
r21 | |
| 011 ALC setpol M LBP (AK-CCSS parameter P87,P86) | r22 | |
| SH Koala (AK-CC55 parameter —) |
r23 | |
| SH Setpolnt (AK-CCSS parameter n10, n09) |
r24 | |
| EEV e qobella OD e tlase ka mor'a ho hlaphoheloa ha oli (AK-CCSS AFidentForce = 1.0) | r25 | |
| 011 ALC setpol M MBP (AK-CCSS parameter P87,P86) | r26 | |
| 011 ALC setpoint HBP (AK-CC55 parameter P87,P86) | r27 | |
| Tse fapaneng | ||
| Haeba molaoli a hahiloe marang-rang a nang le puisano ea data, e tlameha ho ba le aterese, 'me setsi sa tsamaiso sa puisano ea data se tlameha ho tseba aterese ena. | ||
| Aterese e behiloe pakeng tsa 0 le 240, ho itšetlehile ka yuniti ea tsamaiso le puisano ea data e khethiloeng. | 3 | |
| Evaporator controller addressing | ||
| Node 1 Aterese Aterese ea "evaporator controller" ea pele E tla bonts'oa feela haeba molaoli o fumanoe nakong ea scan. |
lo01 | |
| Aterese ea Node 2 Sheba parameter lo01 | 1002 | |
| Aterese ea Node 3 Sheba parameter lo01 | lo03 | |
| Aterese ea Node 4 Sheba parameter lo01 | 1004 | |
| Aterese ea Node 5 Sheba paramethara 1001 | 1005 | |
| Aterese ea Node 6 Sheba parameter lo01 | 1006 | |
| Aterese ea Node 7 Sheba paramethara 1001 | 1007 | |
| Node 8 Aterese Sheba parameter lo01 Ion |
||
| Aterese ea Node 9 Sheba paramethara 1001 | 1009 |
| Mosebetsi | Paramethara | Litlhaloso |
| Aterese ea Node 10 Sheba parameter lo01 | 1010 | |
| Aterese ea Node 11 Sheba parameter lo01 | lol 1 | |
| Aterese ea Node 12 Sheba paramethara 1001 | 1012 | |
| Aterese ea Node 13 Sheba paramethara 1001 | 1013 | |
| Aterese ea Node 14 Sheba parameter lo01 | 1014 | |
| Aterese ea Node 15 Sheba paramethara 1001 | lo15 | |
| Aterese ea Node 16 Sheba paramethara 1001 | 1016 | |
| Skena marangrang E qala ho skena bakeng sa lilaoli tsa mouoane |
nO1 | |
| Hlakola Lenane la Marang-rang E hlakola lethathamo la li-evaporator controllers, tse ka sebelisoang ha ho tlosoa balaoli ba le bang kapa ba 'maloa, tsoela pele ka mochine o mocha oa marang-rang (n01) ka mor'a sena. |
n02 | |
| Tshebeletso | ||
| Bala khatello ea ho tsoa | u01 | Pc |
| Bala mocheso oa motlakase oa gascooler. | U05 | Sgc |
| Bala khatello ea moamoheli | U08 | Theko |
| Bala khatello ea moamoheli mochesong oa mocheso | U09 | Trec |
| Bala khatello ea ho ntša mocheso ka mocheso | U22 | Tc |
| Bala khatello ea maikutlo | U23 | Po |
| Bala khatello ea maikutlo ka mocheso | U24 | Ho |
| Bala mocheso oa ho tsoa | U26 | Sd |
| Bala mocheso o monyang | U27 | Ss |
| Bala mofuta oa software ea taolo | u99 |
| Boemo ba ts'ebetso | (Tekanyo) | |
| Tobetsa hakhutšoanyane (Ke) konopo e ka holimo. Khoutu ea boemo e tla bontšoa skrineng. Likhoutu tsa maemo a motho ka mong li na le meelelo e latelang: | Ctrl. naha | |
| CDU ha e sebetse | SO | 0 |
| CDU e sebetsa | Si | 1 |
| Lipontšo tse ling | ||
| Ho hlaphoheloa ha oli | Oli | |
| Ha ho puisano le CDU | — |
Molaetsa wa phoso
Boemong ba phoso letšoao la alamo le tla benya..
Haeba u tobetsa konopo e ka holimo boemong bona u ka bona tlaleho ea alamo ponts'o.
Melaetsa e ka hlahang ke ena:
| Mongolo oa Khoutu/Alamo ka khokahanyo ea data | Tlhaloso | Ketso |
| E01 / COD kantle ho naha | Puisano e ile ea lahleheloa ke CV | Sheba khokahano ea CDU le tlhophiso (SW1-2) |
| Phoso ea puisano ea E02 / CDU | Karabelo e mpe ho tsoa ho CDU | Sheba tlhophiso ea CDU (SW3-4) |
| Al7 /CDU alamo | Ho hlahile alamo ho CDU | Sheba litaelo tsa CDU |
| A01 / Evap. molaoli 1 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 1 | Sheba Evap. molaoli oa taolo le khokahano |
| A02 / Evap. molaoli 2 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 2 | Sheba A01 |
| A03 / Evap. molaoli 3 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 3 | Sheba A01 |
| A04 / Evap. molaoli 4 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 4 | Sheba A01 |
| A05 / Evap. molaoli 5 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 5 | Sheba A01 |
| A06/ Efa. molaoli 6 offline | Puisano e ile ea felloa ke matla. molaoli 6 | Sheba A01 |
| A07 / Evap. molaoli 7 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 7 | Sheba A01 |
| A08/ Efa. molaoli 8 offline | Puisano e ile ea felloa ke matla. molaoli 8 | Sheba A01 |
| A09/ Efa. molaoli 9 offline | Puisano e ile ea felloa ke matla. molaoli 9 | Sheba A01 |
| A10 / Evap. molaoli 10 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 10 | Sheba A01 |
| Tsohle / Evap. molaoli 11 offline | Puisano e ile ea felloa ke matla. molaoli 11 | Sheba A01 |
| Al2 / Evap. molaoli 12 offline | Puisano e ile ea felloa ke matla. molaoli 12 | Sheba A01 |
| A13 /Evap. molaoli 13 offline | Puisano e ile ea felloa ke matla. molaoli 13 | Sheba A01 |
| A14 /Evap. molaoli 14 offline | Puisano e ile ea felloa ke matla. molaoli 14 | Sheba A01 |
| A15 /Evapt controller 15 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 15 | Sheba A01 |
| A16 / Evapt controller 16 kantle ho marang-rang | Puisano e ile ea felloa ke matla. molaoli 16 | Sheba A01 |
Patlisiso ea menyetla
| Mosebetsi | Khoutu | Min | Max | Feme | Mosebelisi-Setlhophiso |
| Taolo | |||||
| Min. Khatello | r01 | 0 bar | 126 bar | CDU | |
| Max. Khatello | r02 | 0 bar | 126 bar | CDU | |
| Ts'ebetso ea Batla | r03 | 0 | 3 | 0 | |
| Mokhoa o Khutsitseng | r04 | 0 | 4 | 0 | |
| Tšireletso ea Lehloa | r05 | 0 (TSOANG) | 1 (TSOA) | 0 (TSOANG) | |
| Main Switch Start/Emisa CDU | r12 | 0 (TSOANG) | 1 (TSOA) | 0 (TSOANG) | |
| Mohloli oa litšupiso | r28 | 0 | 1 | 1 | |
| Bakeng sa Da nfoss Feela | |||||
| SH Molebeli ALC | r20 | 1.0K | 10.0K | 2.0K | |
| SH Qala ALC | r21 | 2.0K | 15.0K | 4.0 K | |
| 011 ALC setpoint LBP | r22 | -6.0K | 6.0 K | -2.0 K | |
| SH Koala | r23 | 0.0K | 5.0 K | 25 K | |
| Sebaka sa SH | r24 | 4.0K | 14.0K | 6.0 K | |
| EEV e qobella OD e tlase ka mor'a ho hlaphoheloa ha oli | r25 | 0 mets | 60 mets | 20 mets | |
| Oli ALC setpoint MBP | r26 | -6.0K | 6.0 K | 0.0 K | |
| 011 ALC setpoint HBP | r27 | -6.0K | 6.0K | 3.0K | |
| Tse fapaneng | |||||
| Aterese ea CDU | o03 | 0 | 240 | 0 | |
| Efa. molaoli Ho bua | |||||
| Node 1 Aterese | lo01 | 0 | 240 | 0 | |
| Node 2 Aterese | lo02 | 0 | 240 | 0 | |
| Node 3 Aterese | lo03 | 0 | 240 | 0 | |
| Node 4 Aterese | lo04 | 0 | 240 | 0 | |
| Node 5 Aterese | lo05 | 0 | 240 | 0 | |
| Node 6 Aterese | 106 | 0 | 240 | 0 | |
| Node 7 Aterese | lo07 | 0 | 240 | 0 | |
| Node 8 Aterese | lo08 | 0 | 240 | 0 | |
| Node 9 Aterese | looO8 | 0 | 240 | 0 | |
| Node 10 Aterese | lo10 | 0 | 240 | 0 | |
| Node 11 Aterese | loll | 0 | 240 | 0 | |
| Node 12 Aterese | lo12 | 0 | 240 | 0 | |
| Node 13 Aterese | lo13 | 0 | 240 | 0 | |
| Node 14 Aterese | 1o14 | 0 | 240 | 0 | |
| Node 15 Aterese | lo15 | 0 | 240 | 0 | |
| Node 16 Aterese | 1o16 | 0 | 240 | 0 | |
| Skena marangrang E qala ho skena bakeng sa lilaoli tsa mouoane |
nO1 | 0 OF | 1 HO QALA | 0 (TSOANG) | |
| Hlakola Lenane la Marang-rang E hlakola lethathamo la li-evaporator controllers, tse ka sebelisoang ha ho tlosoa balaoli ba le bang kapa ba 'maloa, tsoela pele ka mochine o mocha oa marang-rang (n01) ka mor'a sena. |
n02 | 0 (TSOANG) | 1 (TSOA) | 0 (TSOANG) | |
| Tshebeletso | |||||
| Bala khatello ea ho tsoa | u01 | bar | |||
| Bala mocheso oa motlakase oa gascooler. | UOS | °C | |||
| Bala khatello ea moamoheli | U08 | bar | |||
| Bala khatello ea moamoheli mochesong oa mocheso | U09 | °C | |||
| Bala khatello ea ho ntša mocheso ka mocheso | 1122 | °C | |||
| Bala khatello ea maikutlo | 1123 | bar | |||
| Bala khatello ea maikutlo ka mocheso | U24 | °C | |||
| Bala mocheso oa ho tsoa | U26 | °C | |||
| Bala mocheso o monyang | U27 | °C | |||
| Bala mofuta oa software ea taolo | u99 | ||||
Danfoss A/S Climate Solutions danfoss.com • +45 7488 2222
Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, bokgoni kapa datha efe kapa efe ya tekheniki e dipukung tsa sehlahiswa, ditlhaloso tsa manane a dikhatiso, dipapatso, jj le hore na di fumaneha ka mongolo. , ka molomo, ka mokhoa oa elektronike, inthaneteng kapa ka mokhoa oa ho jarolla, e tla nkoa e le tsebo, 'me e tlama feela haeba, ho fihlela moo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabelo bofe kapa bofe bakeng sa liphoso tse ka bang teng libukeng, libukana, livideo le lintho tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa.
Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.
© Danfoss | Litharollo tsa Tlelaemete | 2023.01
Litokomane / Lisebelisoa
 |
Danfoss CO2 Module Controller Universal Gateway [pdf] Bukana ea Mosebelisi CO2 Module Controller Universal Gateway, CO2, Module Controller Universal Gateway, Molaoli oa Mojule, Molaoli, Universal Gateway, Gateway |
 |
Danfoss CO2 Module Controller Universal Gateway [pdf] Bukana ea Mosebelisi Phetolelo ea SW 1.7, CO2 Module Controller Universal Gateway, CO2, Module Controller Universal Gateway, Controller Universal Gateway, Universal Gateway, Gateway |
