CO2 Module Controller Universal Gateway
Cov neeg siv phau ntawv qhia
Kev teeb tsa hluav taws xob
Hauv qab no yog ib qho piv txwv ntawm kev sib txuas sab nraud uas tuaj yeem ua rau hauv cov chaw taws teeb tswj kev sib dhos.
Fais fab mov rau CDU
230V AC 1,2m cable rau qhov no suav nrog.
Txuas Module maub los fais fab cable rau L1 (sab laug davhlau ya nyob twg) thiab N (txoj cai davhlau ya nyob twg) ntawm lub condensing unit tswj vaj huam sib luag - hwj chim
muab terminal block
Ceev faj: Yog hais tias lub cable yuav tsum tau hloov, nws yuav tsum yog luv luv-circuit pov thawj los yog nws yuav tsum tau tiv thaiv los ntawm ib tug fuse ntawm lwm kawg.
Qauv: RS485-1
Modbus interface rau kev sib txuas rau System Manager
Qauv: RS485-2
Modbus interface rau kev txuas mus rau CDU.
1,8 m cable rau qhov no suav nrog.
Txuas no RS485-2 Modbus cable rau davhlau ya nyob twg A thiab B ntawm lub condensing unit tswj vaj huam sib luag - Modbus interface terminal block. Tsis txhob txuas insulated ntaub thaiv npog rau hauv av 
Qauv: RS485-3
Modbus interface rau kev sib txuas rau cov evaporator controllers
3 x LED Function piav qhia
- Blue coj yog ON thaum CDU txuas thiab ua haujlwm tiav
- LED liab yog flashing thaum muaj kev sib txuas lus txhaum nrog tus evaporator maub los
- Ntsuab LED yog flashing thaum sib txuas lus nrog tus evaporator maub los Lub ntsuab LED nyob ib sab ntawm 12V fais fab mov terminals qhia "Power OK".
Hluav taws xob nrov
Cables rau cov ntaub ntawv kev sib txuas lus yuav tsum tau muab cais los ntawm lwm yam hluav taws xob cables:
- Siv cov tais kab sib cais
- Khaws qhov deb ntawm cov cables tsawg kawg yog 10 cm.
Mechanical Installation
- Kev teeb tsa hauv lub nraub qaum ntawm chav tsev / nraub qaum ntawm e-vaj huam sib luag nrog muab rivets lossis screws (3 lub qhov txuas muab)
Txheej txheem:
- Tshem tawm CDU vaj huam sib luag
- Mount lub bracket nrog muab screws los yog rivets
- Kho lub e-Box rau lub bracket (4 screws muab)
- Txoj kev thiab txuas cov Modbus thiab fais fab mov cables muab rau CDU tswj vaj huam sib luag
- Txoj kev thiab txuas cov evaporator maub los Modbus cable mus rau Module maub los
- Kev xaiv: Txoj kev thiab txuas System Manager Modbus cable mus rau Module maub los
Optional installation rau pem hauv ntej (tsuas yog rau 10HP unit, ib sab ntawm CDU tswj vaj huam sib luag, qhov yuav tsum tau drilled)
Txheej txheem:
- Tshem tawm CDU vaj huam sib luag
- Mount lub bracket nrog muab screws los yog rivets
- Kho lub e-Box rau lub bracket (4 screws muab)
- Txoj kev thiab txuas cov Modbus thiab fais fab mov cables muab rau CDU tswj vaj huam sib luag
- Txoj kev thiab txuas cov evaporator maub los Modbus cable mus rau Module maub los
- Kev xaiv: Txoj kev thiab txuas System Manager Modbus cable mus rau Module maub los
Module Controller thaiv kab
Thov xa cov xov tooj sib txuas lus los ntawm sab saum toj ntawm daim ntawv tswj hwm mus rau sab laug. Lub cable los nrog lub module maub los.
Thov hla lub hwj chim cable los ntawm kev rwb thaiv tsev nyob hauv qab ntawm lub thawv tswj.
Nco tseg:
Cov cables yuav tsum tau kho nrog cov hlua khi thiab yuav tsum tsis txhob kov lub hauv paus kom tsis txhob muaj dej nkag.
Cov ntaub ntawv technical
| Muab voltage | 110-240V AC. 5 VA, 50 / 60 Hz |
| Zaub | LED |
| Kev sib txuas hluav taws xob | Fais fab mov: Max.2.5 mm2 Kev sib txuas lus: Max 1.5 mm2 |
| -25 - 55 ° C, Thaum ua haujlwm -40 - 70 ° C, Thaum thauj | |
| 20-80% RH, tsis condensed | |
| Tsis muaj kev poob siab | |
| Kev tiv thaiv | IP65 |
| Mounting | Phab ntsa los yog nrog nrog bracket |
| Qhov hnyav | TBD |
| Muaj nyob rau hauv pob | 1 x Chaw taws teeb tswj kev sib dhos 1 x Mounting bracket 4x M4 screw 5 x Inox rivets 5 x Sheet hlau screws |
| Kev pom zoo | EC Low Voltage Cov Lus Qhia (2014/35/EU) - EN 60335-1 EMC (2014/30/EU) EN 61000-6-2 thiab 6-3 |
Qhov ntev
Chav nyob hauv mm
Cov khoom seem
| Danfoss Requirements | |||||||
| Yam Lub Npe | Yam No | Tag nrho hnyav |
Chav tsev Dimension (mm) | Ntim Cov Qauv | Lus hais | ||
| Kg | Ntev | Dav | Qhov siab | ||||
CO2 MODULE CONTROLER UNIVERSAL GATEWAY
| MODULE tswj | 118 ua 5498 | TBD | 182 | 90 | 180 | Thawv thawv |
Kev ua haujlwm
Zaub
Cov txiaj ntsig yuav pom nrog peb tus lej.
 |
Lub tswb nrov (daim duab peb sab liab) |
| Tshawb nrhiav Evap. maub los tab tom kawm (daj moos) |
Thaum koj xav hloov qhov chaw, lub khawm sab sauv thiab sab qis yuav muab rau koj ntau dua lossis qis dua tus nqi nyob ntawm lub pob koj thawb. Tab sis ua ntej koj hloov tus nqi, koj yuav tsum muaj kev nkag mus rau cov ntawv qhia zaub mov. Koj tau txais qhov no los ntawm kev thawb lub pob sab saud rau ob peb lub vib nas this - koj mam li nkag mus rau hauv kem nrog cov lej ntsuas. Nrhiav tus lej parameter koj xav hloov thiab thawb cov nyees khawm nruab nrab kom txog thaum tus nqi rau qhov ntsuas pom. Thaum koj tau hloov tus nqi, txuag tus nqi tshiab los ntawm ib zaug ntxiv thawb lub pob nruab nrab. (Yog tias tsis ua haujlwm rau 10 vib nas this, cov zaub yuav hloov rov qab los qhia qhov nqus siab hauv qhov kub thiab txias).
Examples:
Teeb zaub mov
- Nias lub khawm sab sauv kom txog thaum parameter code r01 pom
- Nias lub khawm sab sauv lossis sab qis thiab pom qhov ntsuas koj xav hloov
- Nias lub khawm nruab nrab kom txog thaum tus nqi parameter qhia
- Nias lub khawm sab sauv lossis sab qis thiab xaiv tus nqi tshiab
- Nias lub khawm nruab nrab dua kom khov tus nqi.
Saib lub tswb code
Ib tug luv luv nias ntawm lub Upper khawm
Yog hais tias muaj ob peb lub tswb code lawv pom nyob rau hauv ib tug dov pawg.
Nias lub khawm sab sauv lossis qis tshaj plaws txhawm rau luam theej duab cov yob.
Teeb taw tes
- Nias lub khawm sab sauv kom txog thaum cov zaub qhia pom cov ntawv qhia zaub mov code r01
- Xaiv thiab hloov par. r28 rau 1, uas txhais MMILDS UI raws li cov khoom siv siv
- Xaiv thiab hloov par. r01 mus rau qhov yuav tsum tau qis siab teeb tsa lub hom phiaj hauv bar (g)
- Xaiv thiab hloov par. r02 mus rau qhov xav tau lub siab siab teeb tsa lub hom phiaj hauv bar (g)
Lus Cim: Tus lej nruab nrab ntawm r01 thiab r02 yog lub hom phiaj nqus siab.
Tau pib zoo
Nrog rau cov txheej txheem hauv qab no koj tuaj yeem pib txoj cai sai li sai tau.
- Txuas kev sib txuas lus modbus rau CDU.
- Txuas lub modbus kev sib txuas lus rau evaporator controllers.
- Configure qhov chaw nyob hauv txhua tus evaporator maub los.
- Ua ib qho kev tshuaj ntsuam xyuas hauv lub network hauv module controller (n01).
- Xyuas kom tseeb tias tag nrho cov evas. Cov tswj tau pom (Io01-Io08).
- Qhib parameter r12 thiab pib txoj cai.
- Rau kev txuas mus rau Danfoss System Manager
- Txuas kev sib txuas lus modbus
- Teem qhov chaw nyob nrog parameter o03
- Ua ib qho scan hauv System Manager.
Tshawb nrhiav cov haujlwm
| Muaj nuj nqi | Parameter | Lus hais |
| Ib txwm tso saib | ||
| Cov zaub qhia tau hais tias qhov nqus siab hauv qhov kub thiab txias. | ||
| Kev cai | ||
| Min. Siab Qhov chaw qis dua rau kev nqus siab. Saib cov lus qhia rau CDU. |
r01 ua | |
| Max. Siab Upper set point rau suction siab. Saib cov lus qhia rau CDU. |
r02 ua | |
| Kev thov ua haujlwm Txwv cov compressor ceev ntawm CDU. Saib cov lus qhia rau CDU. |
r03 ua | |
| Hom ntsiag to Qhib / kaw qhov ntsiag to hom. Kev khiav hauj lwm suab nrov yog suppressed los ntawm kev txwv qhov ceev ntawm sab nraum zoov kiv cua thiab compressor. |
r04 ua | |
| Kev tiv thaiv daus Pab kom / lov tes taw ua haujlwm tiv thaiv daus. Txhawm rau tiv thaiv kom tsis txhob muaj daus los ntawm kev tsim cov kiv cua sab nraum zoov thaum lub caij ntuj no kaw, lub kiv cua sab nraum zoov yog ua haujlwm ntawm lub sijhawm tsis tu ncua kom tshuab tawm cov daus. |
r05 ua | |
| Main Hloov Pib / nres lub CDU | r12 ua | |
| Kev siv qhov chaw CDU tuaj yeem siv qhov kev siv uas tau teeb tsa nrog cov hloov pauv hloov hauv CDU, lossis nws tuaj yeem siv qhov kev siv raws li tau hais los ntawm qhov ntsuas r01 thiab r02. Qhov no parameter configures uas siv rau kev siv. |
r28 ua | |
| Rau Danfoss nkaus xwb | ||
| SH Guard ALC Txiav tawm txwv rau ALC tswj (roj rov qab) |
r20 ua | |
| SH Pib ALC Txiav-hauv txwv rau ALC tswj (roj rov qab) |
r21 ua | |
| 011 ALC setpol M LBP (AK-CCSS parameter P87,P86) | r22 ua | |
| SH Kaw (AK-CC55 parameter —) |
r23 ua | |
| SH Setpolnt (AK-CCSS parameter n10, n09) |
r24 ua | |
| EEV quab yuam qis OD tom qab roj rov qab (AK-CCSS AFidentForce = 1.0) | r25 ua | |
| 011 ALC setpol M MBP (AK-CCSS parameter P87,P86) | r26 ua | |
| 011 ALC setpoint HBP (AK-CC55 parameter P87, P86) | r27 ua | |
| Lwm yam | ||
| Yog tias tus maub los tsim rau hauv lub network nrog cov ntaub ntawv sib txuas lus, nws yuav tsum muaj qhov chaw nyob, thiab chav tsev ntawm cov ntaub ntawv sib txuas lus yuav tsum paub qhov chaw nyob no. | ||
| Qhov chaw nyob yog teem caij nruab nrab ntawm 0 thiab 240, nyob ntawm qhov system unit thiab xaiv cov ntaub ntawv sib txuas lus. | 3 | |
| Evaporator controller chaw nyob | ||
| Node 1 Chaw Nyob Chaw nyob ntawm thawj evaporator maub los Tsuas yog yuav pom yog tias tus maub los tau pom thaum lub sijhawm scan. |
loj 01 | |
| Node 2 Chaw Nyob Saib parameter lo01 | 1002 | |
| Node 3 Chaw Nyob Saib parameter lo01 | loj 03 | |
| Node 4 Chaw Nyob Saib parameter lo01 | 1004 | |
| Node 5 Chaw Nyob Saib parameter 1001 | 1005 | |
| Node 6 Chaw Nyob Saib parameter lo01 | 1006 | |
| Node 7 Chaw Nyob Saib parameter 1001 | 1007 | |
| Node 8 Chaw Nyob Saib parameter lo01 Ion |
||
| Node 9 Chaw Nyob Saib parameter 1001 | 1009 |
| Muaj nuj nqi | Parameter | Lus hais |
| Node 10 Chaw Nyob Saib parameter lo01 | 1010 | |
| Node 11 Chaw Nyob Saib parameter lo01 | lolx 1 | |
| Node 12 Chaw Nyob Saib parameter 1001 | 1012 | |
| Node 13 Chaw Nyob Saib parameter 1001 | 1013 | |
| Node 14 Chaw Nyob Saib parameter lo01 | 1014 | |
| Node 15 Chaw Nyob Saib parameter 1001 | loj 15 | |
| Node 16 Chaw Nyob Saib parameter 1001 | 1016 | |
| Tshawb Network Pib ib qho scan rau evaporator controllers |
nCO 1 | |
| Clear Network List Tshem tawm cov npe ntawm cov evaporator controllers, tej zaum yuav siv tau thaum ib los yog ob peb lub controllers raug tshem tawm, mus nrog ib tug tshiab network scan (n01) tom qab qhov no. |
n 02 | |
| Kev pabcuam | ||
| Nyeem qhov tso tawm siab | ua 01 | Pc |
| Nyeem gascooler qhov hluav taws xob temp. | U05 | Sgc |
| Nyeem txais siab | U08 | Ua ntej |
| Nyeem receiver siab nyob rau hauv qhov kub thiab txias | U09 | Trec |
| Nyeem qhov tso tawm hauv qhov kub thiab txias | U22 | Tc |
| Nyeem qhov suction siab | U23 | Po |
| Nyeem suction siab nyob rau hauv qhov kub thiab txias | U24 | Rau |
| Nyeem qhov ntsuas kub tawm | U26 | Sd |
| Nyeem qhov ntsuas kub | U27 | Ss |
| Nyeem maub los software version | ua 99 |
| Cov xwm txheej ua haujlwm | (Kev ntsuas) | |
| Thawb luv luv (Yog) lub khawm sab saud. Cov xwm txheej code yuav tshwm sim ntawm cov zaub. Cov xwm txheej ntawm tus kheej muaj cov ntsiab lus hauv qab no: | Ctrl. xeev | |
| CDU tsis ua haujlwm | SO | 0 |
| CDU ua haujlwm | Si | 1 |
| Lwm cov ntaub ntawv tawm | ||
| Roj rov qab | Roj | |
| Tsis muaj kev sib txuas lus nrog CDU | — |
Cov lus yuam kev
Nyob rau hauv qhov teeb meem yuam kev lub tswb cim yuav flash ..
Yog tias koj thawb lub pob saum toj kawg nkaus hauv qhov xwm txheej no koj tuaj yeem pom daim ntawv ceeb toom ceeb toom hauv cov zaub.
Nov yog cov lus uas yuav tshwm sim:
| Code / Tswb ntawv nyeem ntawm cov ntaub ntawv sib txuas lus | Kev piav qhia | Kev ua |
| E01 / COD offline | Kev sib txuas lus poob nrog CV | Txheeb xyuas CDU kev sib txuas thiab teeb tsa (SW1-2) |
| E02 / CDU kev sib txuas lus yuam kev | Cov lus teb tsis zoo los ntawm CDU | Xyuas CDU configuration (SW3-4) |
| Al7 / CDU tswb | Lub tswb tau tshwm sim hauv CDU | Saib cov lus qhia rau CDU |
| A01 / Kev. maub los 1 offline | Kev sib txuas lus poob nrog evap. tswj 1 | Tshawb xyuas Evap. controller controller thiab kev sib txuas |
| A02 / Kev. maub los 2 offline | Kev sib txuas lus poob nrog evap. tswj 2 | Saib A01 |
| A03 / Kev. maub los 3 offline | Kev sib txuas lus poob nrog evap. tswj 3 | Saib A01 |
| A04 / Kev. maub los 4 offline | Kev sib txuas lus poob nrog evap. tswj 4 | Saib A01 |
| A05 / Kev. maub los 5 offline | Kev sib txuas lus poob nrog evap. tswj 5 | Saib A01 |
| A06/ Kev. maub los 6 offline | Kev sib txuas lus poob nrog evap. tswj 6 | Saib A01 |
| A07 / Kev. maub los 7 offline | Kev sib txuas lus poob nrog evap. tswj 7 | Saib A01 |
| A08/ Kev. maub los 8 offline | Kev sib txuas lus poob nrog evap. tswj 8 | Saib A01 |
| A09/ Kev. maub los 9 offline | Kev sib txuas lus poob nrog evap. tswj 9 | Saib A01 |
| A10 / Kev. maub los 10 offline | Kev sib txuas lus poob nrog evap. tswj 10 | Saib A01 |
| Txhua / Evap. maub los 11 offline | Kev sib txuas lus poob nrog evap. tswj 11 | Saib A01 |
| Al2 / Evap. maub los 12 offline | Kev sib txuas lus poob nrog evap. tswj 12 | Saib A01 |
| A13 / Ev. maub los 13 offline | Kev sib txuas lus poob nrog evap. tswj 13 | Saib A01 |
| A14 / Ev. maub los 14 offline | Kev sib txuas lus poob nrog evap. tswj 14 | Saib A01 |
| A15 / Evapt maub los 15 offline | Kev sib txuas lus poob nrog evap. tswj 15 | Saib A01 |
| A16 / Evapt maub los 16 offline | Kev sib txuas lus poob nrog evap. tswj 16 | Saib A01 |
Ntawv qhia zaub mov
| Muaj nuj nqi | Code | Min | Max | Hoobkas | Cov neeg siv-Setting |
| Kev cai | |||||
| Min. Siab | r01 ua | 0 bar | 126 bar | CDU | |
| Max. Siab | r02 ua | 0 bar | 126 bar | CDU | |
| Kev thov ua haujlwm | r03 ua | 0 | 3 | 0 | |
| Hom ntsiag to | r04 ua | 0 | 4 | 0 | |
| Kev tiv thaiv daus | r05 ua | 0 (OFF) | 1 (ON) | 0 (OFF) | |
| Main Hloov Pib / nres lub CDU | r12 ua | 0 (OFF) | 1 (ON) | 0 (OFF) | |
| Kev siv qhov chaw | r28 ua | 0 | 1 | 1 | |
| Rau Da nfoss nkaus xwb | |||||
| SH Guard ALC | r20 ua | 1.0k ua | 10.0k ua | 2.0k ua | |
| SH Pib ALC | r21 ua | 2.0k ua | 15.0k ua | 4.0 K | |
| 011 ALC setpoint LBP | r22 ua | -6.0K | 6.0 K | -2.0 K | |
| SH Kaw | r23 ua | 0.0k ua | 5.0 K | 25 K | |
| SH Setpoint | r24 ua | 4.0k ua | 14.0k ua | 6.0 K | |
| EEV quab yuam qis OD tom qab roj rov qab | r25 ua | 0 feeb | 60 feeb | 20 feeb | |
| Roj ALC setpoint MBP | r26 ua | -6.0K | 6.0 K | 0.0 K | |
| 011 ALC setpoint HBP | r27 ua | -6.0K | 6.0k ua | 3.0k ua | |
| Lwm yam | |||||
| CDU Chaw Nyob | o03 ua | 0 | 240 | 0 | |
| Evap. controller Chaw Nyob | |||||
| Node 1 Chaw Nyob | loj 01 | 0 | 240 | 0 | |
| Node 2 Chaw Nyob | loj 02 | 0 | 240 | 0 | |
| Node 3 Chaw Nyob | loj 03 | 0 | 240 | 0 | |
| Node 4 Chaw Nyob | loj 04 | 0 | 240 | 0 | |
| Node 5 Chaw Nyob | loj 05 | 0 | 240 | 0 | |
| Node 6 Chaw Nyob | 106 | 0 | 240 | 0 | |
| Node 7 Chaw Nyob | loj 07 | 0 | 240 | 0 | |
| Node 8 Chaw Nyob | loj 08 | 0 | 240 | 0 | |
| Node 9 Chaw Nyob | loj 8 | 0 | 240 | 0 | |
| Node 10 Chaw Nyob | loj 10 | 0 | 240 | 0 | |
| Node 11 Chaw Nyob | luag | 0 | 240 | 0 | |
| Node 12 Chaw Nyob | loj 12 | 0 | 240 | 0 | |
| Node 13 Chaw Nyob | loj 13 | 0 | 240 | 0 | |
| Node 14 Chaw Nyob | 1o14 ua | 0 | 240 | 0 | |
| Node 15 Chaw Nyob | loj 15 | 0 | 240 | 0 | |
| Node 16 Chaw Nyob | 1o16 ua | 0 | 240 | 0 | |
| Tshawb Network Pib ib qho scan rau evaporator controllers |
nCO 1 | 0 ZPO | 1 ON ib | 0 (OFF) | |
| Clear Network List Tshem tawm cov npe ntawm cov evaporator controllers, tej zaum yuav siv tau thaum ib los yog ob peb lub controllers raug tshem tawm, mus nrog ib tug tshiab network scan (n01) tom qab qhov no. |
n 02 | 0 (OFF) | 1 (ON) | 0 (OFF) | |
| Kev pabcuam | |||||
| Nyeem qhov tso tawm siab | ua 01 | bar | |||
| Nyeem gascooler qhov hluav taws xob temp. | UOS | °C | |||
| Nyeem txais siab | U08 | bar | |||
| Nyeem receiver siab nyob rau hauv qhov kub thiab txias | U09 | °C | |||
| Nyeem qhov tso tawm hauv qhov kub thiab txias | 1122 | °C | |||
| Nyeem qhov suction siab | 1123 | bar | |||
| Nyeem suction siab nyob rau hauv qhov kub thiab txias | U24 | °C | |||
| Nyeem qhov ntsuas kub tawm | U26 | °C | |||
| Nyeem qhov ntsuas kub | U27 | °C | |||
| Nyeem maub los software version | ua 99 | ||||
Danfoss A/S Climate Solutions danfoss.com • +45 7488 2222
Txhua yam ntaub ntawv, suav nrog, tab sis tsis txwv rau cov ntaub ntawv ntawm kev xaiv cov khoom, nws daim ntawv thov lossis kev siv, cov khoom tsim, qhov hnyav, qhov ntev, muaj peev xwm lossis lwm yam ntaub ntawv hauv cov khoom siv hauv phau ntawv qhia, cov lus piav qhia, kev tshaj tawm, thiab lwm yam thiab seb puas muaj nyob rau hauv kev sau ntawv , hais lus, hauv tshuab hluav taws xob, hauv online lossis los ntawm kev rub tawm, yuav tsum suav tias yog cov ntaub ntawv, thiab tsuas yog khi tau yog tias thiab rau qhov twg, cov ntaub ntawv qhia meej yog ua nyob rau hauv cov lus hais lossis kev txiav txim pom zoo. Danfoss tsis tuaj yeem lees txais ib lub luag haujlwm rau qhov ua yuam kev hauv phau ntawv teev npe, daim ntawv qhia, yeeb yaj kiab thiab lwm yam khoom siv. Danfoss tseg txoj cai los hloov nws cov khoom yam tsis muaj ntawv ceeb toom. Qhov no kuj siv tau rau cov khoom xaj tab sis tsis xa tawm yog tias cov kev hloov pauv tuaj yeem ua yam tsis muaj kev hloov pauv rau daim ntawv, haum lossis ua haujlwm ntawm cov khoom.
Tag nrho cov cim lag luam hauv cov khoom no yog cov cuab yeej ntawm Danfoss A/S lossis Danfoss pawg tuam txhab. Danfoss thiab Danfoss logo yog cov cim lag luam ntawm Danfoss A / S. Txhua txoj cai.
© Danfoss | Huab cua daws | 2023.01 Nws
Cov ntaub ntawv / Cov ntaub ntawv
 |
Danfoss CO2 Module Controller Universal Gateway [ua pdf] Cov neeg siv phau ntawv qhia CO2 Module Controller Universal Gateway, CO2 Module Controller Universal Gateway, Module Controller, Controller, Universal Gateway, Rooj vag |
 |
Danfoss CO2 Module Controller Universal Gateway [ua pdf] Cov neeg siv phau ntawv qhia SW version 1.7, CO2 Module Controller Universal Gateway, CO2, Module Controller Universal Gateway, Controller Universal Gateway, Universal Gateway, Rooj vag |
