MOSEBETSI TS'ELISO
TSOHLE 2/4-PORT
DP MST TŠIRELETSA KVM
PHETHA
KVS4-1004VM Dp Mst Secure Kvm Switch
Mehlala:
| • KVS4-1002VM | 2-Port SH DP MST ho 2xHDMI Sireletsehile KVM w/audio, HA HO CAC |
| • KVS4-1002VMX | 2-Port SH DP MST ho 2xHDMI Sireletsehile KVM w/audio le CAC |
| • KVS4-1004VM | 4-Port SH DP MST ho 2xHDMI Sireletsehile KVM w/audio, HA HO CAC |
| • KVS4-1004VMX | 4-Port SH DP MST ho 2xHDMI Sireletsehile KVM w/audio le CAC |
| • KVS4-2004VMX | 4-Port DH DP MST ho 2xHDMI Secure KVM w/audio le CAC |
LIEKETSENG MOKHOPO
| VIDEO | ||
| Sebopeho | DisplayPort ', HDMI | |
| Sebaka sa Phallo | KVS4-1002VM / KVS4-1002VMX | (2) DisplayPort 20-pin (basali) |
| KVS4-1004VM / KVS4-1004VMX | (4) DisplayPort 20-pin (basali) | |
| KVS4-2004VMX | (8) DisplayPort 20-pin (basali) | |
| User Console Interface | KVS4-1002VM / KVS4-1002VMX / KVS4-1004VM / KVS4-1004VMX / KVS4-2004VMX | (2) HDMI 19-pin (motšehali) |
| Qeto ea Max | 3840×2160 @ 30Hz | |
| DDC | 5 volts pp (TTL) | |
| Kenyeletso ya Tekatekano | Ka ho iketsa | |
| Kena Bolelele ba Cable | Ho fihla ho 20 ft. | |
| Khumo Bolelele ba Cable | Ho fihla ho 20 ft. | |
| USB | ||
| Mofuta oa Letšoao | USB 1.1 le 1.0 Keyboard le Mouse feela. USB 2.0 bakeng sa khokahano ea CAC (Ka mefuta e nang le CAC feela) | |
| Mofuta oa B | KVS4-1002VM | (2) Mofuta oa USB oa B |
| KVS4-1002VMX / KVS4-1004VM | (4) Mofuta oa USB oa B | |
| KVS4-1004VMX / KVS4-2004VMX | (8) Mofuta oa USB oa B | |
| User Console Interface | (2) USB Type-A bakeng sa khokahano ea keyboard le mouse feela | |
| (1) USB Type-A bakeng sa khokahanyo ea CAC (feela mefuta e nang le CAC) | ||
| MUDIO | ||
| Kenyeletso | (2)/(4) Sehokedi Stereo 3.5mm Mosadi | |
| Sephetho | (1) Sehokelo Stereo 3.5mm E Motšehali | |
| MATLA | ||
| Litlhoko tsa Matla | 12V DC, 3A (bonyane) adaptara ea matla e nang le polarity e ntle ea pini e bohareng. | |
| TIKOLOGO Operating Temp | 32° ho isa ho 104° F (0′ ho isa ho 40° C) | |
| Mocheso oa polokelo | -4° ho isa ho 140° F (-20° ho isa ho 60° C) | |
| Mongobo MATS'ELISO Kamohelo ea Tšireletso |
0-80% RH, e sa fokotseng Lintlha tse Tloaelehileng li netefalitsoe ho NIAR Protection Profile PSS Ver. 4.0 |
|
| TSE LING | ||
| Emulation | Keyboard, Toeba le Video | |
| Taolo | Likonopo tsa Front Panel | |
KE ENG E KA LEKOSONG?
| Secure DP MST KVM Switch Unit | 2/4-Port Sireletsehile DP MST KVM |
| Phepelo ea motlakase | Phepelo ea matla a desktop 100-240V, 12VDC 3A |
TS'IRELETSO MAKHABANE
ANTI-TAMPER LITS'OANE
Mohlala o mong le o mong o na le Anti-T ea kahareamper switches, e leng ntho e lekang ho bula sebaka se kampetsoeng sa sesebelisoa. Hang ha sistimi e tsebahatsa teko e joalo, li-LED tsohle tse ka pele li tla benya ka potlako mme yuniti e tla fetoha lefeela ka ho koala khokahano le li-PC tsohle tse hokelletsoeng le li-peripheral tse sitisang ts'ebetso efe kapa efe.
TAMPER-POTSO TIISO
Sebaka se kampetsoeng sa yuniti se sirelelitsoe ka hoamper-evident seal ho fana ka bopaki ba pono haeba yuniti e butsoe.
TS'IRELETSO FIRMWARE
Molaoli oa yuniti o na le ts'ireletso e khethehileng e thibelang ho hlophisa bocha kapa ho bala firmware.
HO KHEHALA HO PHAHAMENG HO LITŠEBELETSO TSA USB
Li-Opto-isolator li sebelisoa yuniti ho boloka litsela tsa data tsa USB li arohane ka motlakase ho tse ling, li fana ka karohano e phahameng le ho thibela ho lutla ha data lipakeng tsa likou.
TS'IRELETSO EDID MOETSI
Yuniti e thibela data e sa batleheng le e sa sireletsehang hore e fetisoe ka mela ea DDC ka mokhoa o sireletsehileng oa ho ithuta le ho etsisa EDID.
BOITLHEKITSO
Ho itlhahloba ho etsoa nako le nako ha KVM e tsamaisoa e le karolo ea tatellano ea eona ea boot-up. Haeba KVM e qala ka nepo mme e sebetsa, ho itlhahloba ho fetile. Leha ho le joalo, haeba li-LED tsohle tsa Front Panel li butse 'me li sa bonese, boitlhahlobo ba matla bo hlolehile' me mesebetsi eohle e koetsoe. Lekola hore na ho na le likonopo life kapa life tsa khetho ea boema-kepe ba ka pele li petelitsoeng. Tabeng ena, lokolla konopo e koetsoeng 'me u sebelise matla hape.
KEKETSO
TSAMAISO LIHLOKO
- Black Box Secure PSS e tsamaisana le likhomphutha tse tloaelehileng tsa motho ka mong / tse nkehang, li-server kapa bareki ba tšesaane, ba tsamaisang lits'ebetso tse joalo ka Windows® kapa Linux.
- Lisebelisoa tsa peripheral tse tšehetsoeng ke Secure KVM Switch li thathamisitsoe tafoleng e latelang:
| Kou ea Console | Lisebelisoa tse lumelletsoeng |
| Keyboard | Keybhoto e nang le mehala le letlapa la likonopo ntle le hub ea ka hare ea USB kapa lisebelisoa tse kopaneng tsa lisebelisoa, ntle le haeba sesebelisoa se hokahaneng se na le bonyane ntlha e le 'ngoe e leng keyboard kapa mouse HID class. |
| Pontšo | Sesebediswa sa ho bontsha (mohlala, monitor, projector) se sebedisang sehokelo se sebetsang hantle le se sebetsang hantle e lumellana le likou tsa lihlahisoa (DisplayPort™, HDMI). |
| Audio tsoa | Analoge ampLibui tse hloekisitsoeng, li-headphone tsa Analog. |
| Tweba/ Sesebedisoa sa ho supa | Penya efe kapa efe e nang le wired kapa trackball ntle le hub ea kahare ea USB kapa lisebelisoa tse kopaneng tsa sesebelisoa. |
| Sesebediswa sa netefatso ya mosebedisi | Lisebelisoa tsa USB tse bonts'itsoeng e le netefatso ea mosebelisi (sehlopha sa motheo sa 0Bh, mohlala, Smart-card reader, PIV/ Sebali sa CAC, Token, kapa sebali sa Biometric) |
Lethathamo la 1-1
Lihlopha tsa Motho a le Mong:
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le likhomphutha.
- Sebelisa thapo ea DisplayPort™ ho hokela boema-kepe ba DisplayPort™ ho tsoa komporong e 'ngoe le e 'ngoe ho ea likoung tse tsamaellanang tsa DP IN tsa yuniti.
- Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong e 'ngoe le e 'ngoe ho likou tsa USB tsa yuniti.
- Hokela thapo ya modumo ya stereo (3.5mm ho ya ho 3.5mm) ka boikgethelo ho hokela tlhahiso ya modumo ya dikhomphutha ho AUDIO IN boemakepe ba yuniti.
- Hokela sebali boema-kepeng ba khomphutha ea HDMI OUT u sebelisa thapo ea HDMI.
- Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ba yuniti.
- Bakeng sa mefuta e nang le CAC, ka boikhethelo hokela CAC (COMMON ACCESS CARD, SMART CARD READER) ho boema-kepe ba CAC ka har'a sehokelo sa mosebelisi.
- Qetellong, matla ho Secure KVM Switch ka ho kopanya motlakase oa 12VDC ho motlakase oa motlakase, ebe o bulela lik'homphieutha tsohle.
Hlokomela: Khomphuta e hoketsoeng ho port 1 e tla lula e khethoa ka mokhoa oa kamehla kamora ho tima.
Hlokomela: O ka hokela likhomphutha tse fihlang ho tse 2 ho 2-port Secure KVM Switch le likhomphutha tse fihlang ho tse 4 ho 4-port Secure KVM switch.
LITEMOSO TSA BOHLOKOA - BAKENG SA MABAKA TŠIRELETSO:
- Sehlahisoa sena ha se sebelise lisebelisoa tse se nang mohala. Se ke oa leka ho sebelisa keyboard e se nang mohala kapa mouse e se nang mohala ka sehlahisoa sena.
- Sehlahisoa sena ha se sebelise likonopo tse nang le li-hubs tsa USB tse kopaneng kapa likou tsa USB. Sebelisa feela likonopo tsa USB tse tloaelehileng (HID) ka sesebelisoa sena.
- Sehlahiswa sena ha se tshehetse ho kenya maekrofounu kapa ho kenya mohala. Se ke oa hokela li-microphone kapa li-headset le li-microphone ho sesebelisoa sena.
- Khokahano ea lisebelisoa tsa netefatso (CAC) le mehloli ea matla a kantle e thibetsoe.
Mefuta e mengata ea Lihlooho:
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le likhomphutha.
- Sebelisa lithapo tsa DisplayPort™ ho hokela likou tsa DisplayPort tsa komporo ka 'ngoe ho likou tse tsamaellanang tsa DP IN tsa yuniti. Bakeng sa mohlalaample, haeba u sebelisa KVS4-2004VMX likou tse peli tsa DisplayPort tsa komporo e le 'ngoe li tlameha ho hokela mocha o le mong.
PC Workstation
Lihokelo tsa DP IN tseo e leng tsa kanale e le 'ngoe li hlophisoa ka ho otloloha. - Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong e 'ngoe le e 'ngoe ho likou tsa USB tsa yuniti.
- Hokela thapo ea molumo ea stereo ka boikhethelo (3.5mm lipheletsong ka bobeli) ho hokela molumo oa khomphutha ho li-port tsa AUDIO IN tsa yuniti.
- Hokela li-monitor ho li-console tsa HDMI OUT tsa yuniti u sebelisa likhoele tsa HDMI.
- Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela libui tsa stereo ka boikhethelo boema-kepe ba AUDIO OUT ba yuniti.
- Hokela CAC (smart card reader) ka boikhethelo boema-kepeng ba CAC ho sehokelo sa khomphutha sa mosebelisi.
- Matla ho Sireletsehile KVM Phetoho ka ho hokahanya phepelo ea motlakase ea 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.
Hlokomela: Khomphuta e hoketsoeng ho port 1 e tla lula e khethoa ka mokhoa oa kamehla kamora ho tima.
EDID Ithute:
Video ea kamehla ea feme ea EDID e behiloe ho HP (1080P max resolution) ho lumella ts'ebetso ea pele ka mefuta e mengata ea ponts'o ea DP. Bakeng sa mabaka a ts'ireletso, EDID e ithuta ka mefuta e mengata ea lipontšo tsa DP e ka fihlelleha feela ke Motsamaisi ea Tiisitsoeng.
Sebelisa mehato e latelang ho theha thuto ea hau ea EDID hantle:
- Netefatsa hore motlakase o khaotsoe kapa o tingoe ho yuniti le komporong.
- U sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B), hokela PC ho K/M Port 1 ea Secure KVM Switch host.
- Hokela keyboard ea USB le mouse likoung tse peli tsa khomphutha tsa USB.
- Hokela thapo ea video ea DP lipakeng tsa PC le Secure KVM Switch host's DP video Port 1.
- Hokela ponts'o ea DP ho Secure KVM Switch console's DP port port.
- Matlafatsa PC le ho Fetola KVM e sireletsehileng.
- Khoasolla Sesebelisoa sa Tsamaiso le Ts'ireletso ho PC ea hau ho tsoa sehokelong sena: |https://www.blackbox.com/NIAP3/documentation
- Matha Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso se ka phethisoang file.
Qala lenaneo u sebelisa mehato e latelang ho Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso:
- Ngola "alt alt cnfg" ho keyboard ea hau.
- Toeba e hokahantsoeng le Secure KVM Switch e tla emisa ho sebetsa 'me u tla susumelletseha ho "kena id ea netefatso."
- Kena joalo ka motsamaisi ka ho kenya lebitso la mosebelisi la kamehla "admin", ebe o tobetsa Enter.
- Kenya password ea kamehla “1 2 3 4 5” ebe o tobetsa Enter.
- Likhetho tse supileng li tla hlaha lenaneng la linomoro: khetha "Khetha Mokhoa" ebe o tobetsa Enter.
- Ho tla hlaha menu e o lebisang ho Khetha Mokhoa; ho e-na le hoo, thaepa "local" ebe o tobetsa Enter.
Sesebelisoa sa Tsamaiso le Ts'ireletso ea Ts'ireletso joale se tla ithuta le ho boloka EDID ea ponts'o, ebe sesebelisoa se tla qala bocha le ho qala bocha. Qetellong ea boot-up, etsa bonnete ba hore likhomphutha tsohle li hokahane le Secure KVM Phetoho ka koung e 'ngoe le e' ngoe ho netefatsa hore bohle ba hlahisa video hantle ponts'ong e hokahaneng.
Mehato e latelang e reretsoe mookameli oa tsamaiso kapa mookameli oa IT feela.
Haeba u na le likou tsa boikhethelo tsa CAC ho tla ba le likou tse 2 ho 2-host-port Secure KVM Switch le likou tse 4 ho 4-host-port Secure KVM Switch. Khokahano ea CAC komporong e hloka khokahano ea thapo ea USB e arohaneng le keyboard le mouse. Sena se lumella CAC hore e hokahane e ikemetse ho keyboard le mouse. E boetse e lumella mosebelisi ho khetha hore na CAC bakeng sa komporo e itseng e tšehelitsoe kapa che.
- Netefatsa hore motlakase o timiloe kapa o khaotsoe ho yuniti le komporong.
- Sebelisa thapo ea USB (Mofuta oa A ho ea ho Mofuta oa B) ho hokela kou ea USB komporong ho likoung tsa eona tsa CAC tsa USB ho Secure KVM Switch. Se ke oa hokela thapo ea USB haeba tšebetso ea CAC e sa hlokehe bakeng sa komporo eo.
- Hokela CAC (sebali sa karete e bohlale) boema-kepeng ba CAC sehokelong sa khomphutha sa mosebelisi.
- Matla ho Sireletsehile KVM Phetoho ka ho hokahanya phepelo ea motlakase ea 12VDC ho sehokelo sa matla, ebe o bulela likhomphutha tsohle.
- Ho tima CAC bakeng sa kanale efe kapa efe (likou tsohle tsa CAC li lumelletsoe joalo ka kamehla), sebelisa likonopo tsa phanele e ka pele ho chencha Secure KVM Switjha ho mocha oo mokhoa oa CAC o lakatsang ho o fetola. Hang ha mocha o khethiloe, konopo ea LED bakeng sa mocha ona o khethehileng o lokela ho buloa (CAC port e lumelletsoe). Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 3 ho fihlela konopo ea LED e tima. Boema-kepe ba CAC bo se bo thibetsoe mocha ona.
Ho nolofalletsa CAC bakeng sa kanale efe kapa efe, sebelisa likonopo tsa phanele e ka pele ho chencha Secure KVM Phetoho ho mocha oo mokhoa oa CAC o lakatsang ho o fetola. Hang ha mocha o khethiloe, konopo ea LED bakeng sa mocha ona o khethehileng o lokela ho tima (CAC port e holofetse). Tobetsa 'me u tšoare konopo bakeng sa metsotsoana e 3 ho fihlela konopo ea LED e bulela. Boema-kepe ba CAC bo se bo lumelletsoe mocha ona. Nako e sebetsang komporong e emisoa ha sesebelisoa sa CAC se tlosoa.
Hlokomela: Seboka se bulehileng se tla felisoa hang hang ha ho tlosoa sesebelisoa sa CAC se ngolisitsoeng.
TS'ELISO CAC KOU
Mehato e latelang e reretsoe mookameli oa tsamaiso le basebetsi (basebedisi).
Hlokomela: Ho hlokahala komporo e le 'ngoe feela e hoketsoeng koung ea 1 bakeng sa ts'ebetso ena.
CAC port Configuration ke karolo ea boikhethelo, e lumellang ngoliso ea peripheral efe kapa efe ea USB ho sebetsa le Secure KVM switch. Ke pheriferale e le 'ngoe feela e ka ngolisoang mme ke sebaka se ngolisitsoeng feela se tla sebetsa ka Secure KVM Switch. Ka mokhoa o ikhethileng, ha ho se na peripheral e ngolisitsoeng, Secure KVM Switch e tla sebetsa le Smart Card Reader efe kapa efe.
Lokisa Boema-kepe ba CAC ka Likhetho tsa Menu ea Basebelisi
- Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso.
- U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
- Ho sena stage toeba e hokahantsoeng le Secure KVM Switch e tla emisa ho sebetsa.
- Kenya lebitso la mosebelisi la kamehla "user" ebe o tobetsa Enter.
- Kenya password ea kamehla "12345" ebe o tobetsa Enter.
- Khetha "Ngolisa Sesebelisoa se Secha sa CAC" ho tsoa ho menu e skrineng sa hau ebe o tobetsa Enter.
- Hokela sesebelisoa sa peripheral hore se ngolisoe boema-kepeng ba CAC USB ka lehlakoreng la Secure KVM Switch 'me u eme ho fihlela Secure KVM Switch e bala lintlha tse ncha tsa peripheral.
- Secure KVM Switch e tla thathamisa tlhahisoleseling ea peripheral e hokahantsoeng skrineng le ho buzz makhetlo a 3 ha ngoliso e felile.
Mehato e latelang e reretsoe mookameli oa tsamaiso.
Hlokomela: Ho hlokahala komporo e le 'ngoe feela e hoketsoeng koung ea 1 bakeng sa ts'ebetso ena.
Lethathamo la Ketsahalo ke tlaleho e qaqileng ea mesebetsi ea bohlokoa e bolokiloeng ho Secure KVM Switch kapa Secure KVM Switch memory.
Lenane le felletseng la likarolo le tataiso bakeng sa Lisebelisoa tsa Tsamaiso le Ts'ireletso ea Ts'ireletso li ka fumanoa ho
Tataiso ea Tsamaiso e teng bakeng sa ho khoasolla ho tsoa: https://www.blackbox.com/NIAP3/documentation
- Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso.
- U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
- Kenya lebitso la kamehla la admin "admin" ebe o tobetsa Enter.
- Kenya password ea kamehla "12345" ebe o tobetsa Enter.
- Kopa ho Lahlela Log ka ho khetha "Dump Log" ho tsoa ho menu. (E bontšitsoe setšoantšong sa 1-9)
* Sheba Tataiso ea Tsamaiso ea Tsamaiso le Ts'ireletso bakeng sa tlhaiso-leseling e batsi.
RESET: Khutlisa Li-Defactory tsa Feme
Mehato e latelang e reretsoe mookameli oa tsamaiso.
Hlokomela: Ho hlokahala komporo e le 'ngoe feela e hoketsoeng koung ea 1 bakeng sa ts'ebetso ena.
Khutlisa Li-Defaults tsa Feme li tla hlophisa litlhophiso tsohle ho Sireletsehile KVM Phetoho ho boemo ba bona ba pele.
Sireletsehile KVM Switch mode.
Ngoliso ea koung ea CAC e tla tlosoa.
Litlhophiso tse sireletsehileng tsa KVM Switch li tla khutlisetsoa ho li-factory tsa feme.
Ho Khutlisa Li-Defactors tsa Feme ka Likhetho tsa Menu ea Basebelisi:
- Bula Lenaneo la Tsamaiso le Ts'ireletso ea Ts'ireletso.
- U sebelisa keyboard, tobetsa konopo ea Alt habeli ebe u ngola "cnfg".
- Kenya lebitso la kamehla la admin "admin" ebe o tobetsa Enter.
- Kenya password ea kamehla "12345" ebe o tobetsa Enter.
- Khetha "Khutlisa Li-Defaults tsa Feme" ho tsoa ho menu e skrineng sa hau ebe o tobetsa Enter. (Lenaneo le bonts'itsoeng ho Setšoantšo sa 1-9)
* Sheba Tataiso ea Tsamaiso ea Tsamaiso le Ts'ireletso bakeng sa tlhaiso-leseling e batsi.
TŠEBELETSO EA LED
Sebopeho sa Console ea mosebelisi - Bontša LED:
|
# |
Boemo |
Tlhaloso |
| 1 | E tima | Monitor ha e ea hokahanngoa |
| 2 | On | Monitor e hokahane |
| 3 | Ho benya | Bothata ba EDID - Ithute EDID ho lokisa bothata |
Sebopeho sa Consolese ea mosebelisi - CAC LED:
|
# |
Boemo |
Tlhaloso |
| 1 | E tima | CAC ha e hokahane |
| 2 | On | CAC e lumelletsoeng le e sebetsang e hokahane |
| 3 | Ho benya | Pheriferale e seng ea CAC e hokahane |
Phanele e ka Pele - Li-LED tsa Khetho ea Port:
|
# |
Boemo |
Tlhaloso |
| 1 | E tima | Boema-kepe bo sa khethoang |
| 2 | On | Kou e khethiloeng |
| 3 | Ho benya | Thuto ea EDID e ntse e tsoela pele |
Phanele e ka Pele - Li-LED tsa Khetho ea CAC:
| # | Boemo | Tlhaloso |
| 1 | E tima | Boema-kepe ba CAC bo koetsoe kapa boema-kepe bo sa khethoang |
| 2 | On | Boema-kepe ba CAC bo lumelletsoe |
| 3 | Ho benya | Thuto ea EDID e ntse e tsoela pele |
Phanele e ka Pele - Li-LED tsa Khetho ea Port le CAC:
| # | Boemo | Tlhaloso |
| 1 | Tsohle tse Flashing | Sebaka se hoketsoeng ho keyboard kapa likou tsa mouse se hanngoe |
BOHLOKOA!
Haeba li-LED tsohle tsa Front Panel li khanya 'me buzzer e ntse e lla, Secure KVM Switch e bile T.AMPERED e nang le mesebetsi eohle e holofalitsoe ruri. Ka kopo ikopanye le tšehetso ea tekheniki ea Black Box ho info@blackbox.com
Haeba li-LED tsohle tsa Front Panel li butse 'me li sa bonese, POWER UP SELF TEST e hlolehile mme mesebetsi eohle e koetsoe. Lekola hore na ho na le likonopo life kapa life tsa khetho ea boema-kepe ba ka pele li petelitsoeng. Tabeng ena, lokolla konopo e koetsoeng 'me u sebelise matla hape. Haeba boitlhahlobo ba motlakase bo ntse bo hloleha, ka kopo ikopanye le tšehetso ea tekheniki ea Black Box ho info@blackbox.com
EDID Ithute - Li-LED tsa Panel e ka Pele:
Li-LED tsohle li buletsoe ka motsotsoana o le mong. Joale:
- Li-LED tsa Port 1 li tla benya ho fihlela qetellong ea ts'ebetso.
- Li-LED tsa Port 2 li tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bobeli ea video e le teng (Dual-head Secure KVM Switch).
- Li-LED tsa Port 3 li tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea boraro ea video e le teng (Quad-head Secure KVM Switch).
- Li-LED tsa Port 4 li tla khanya ho fihlela qetellong ea ts'ebetso haeba boto ea bone ea video e le teng (Quad-head Secure KVM Switch).
TS'EBETSO TS'OANELO
Front Panel Control
Ho fetohela boema-kepeng ba ho kenya, tobetsa feela konopo ea ho kenya eo u e batlang karolong e ka pele ea Secure KVM switch. Haeba sebaka sa ho kenya se khethiloe, LED ea kou eo e tla bulela. Lenaneo le bulehileng le emisoa ha o fetohela komporong e 'ngoe.
HO BATLE PHOSO
Ha ho Matla
- Etsa bonnete ba hore adaptara ea motlakase e hoketsoe ka mokhoa o sireletsehileng ho sehokelo sa motlakase sa yuniti.
- Sheba bophahamo ba modumotage ea phepelo ea motlakase le ho etsa bonnete ba hore voltagboleng ba e ke hoo e ka bang 12VDC.
- Fetola phepelo ea motlakase.
Ho benya li-LED ka Phanele e ka Pele ka ho tobetsa molumo
- Qala yuniti hape. Haeba phoso e tsoela pele, ho na le ho se sebetse hantle kapa likhokahano tse fosahetseng tsa ho kenya likoung tsa K/M.
- Netefatsa likhokahano tsa Keyboard le Mouse ke USB 1.0 kapa 1.1.
- Ke Keyboard ea USB feela kapa Toeba e ka hokelang likoung tse khethiloeng tsa K/M.
LED e khanyang ea USB
- Etsa bonnete ba hore sesebelisoa se nepahetseng sa peripheral se hokahane le boema-kepe bo nepahetseng ba KVM e sireletsehileng.
- Sheba ho bona hore thapo ea USB ea K/M e hokahane le koung ea K/M e ka morao ho yuniti.
- Lekola ho bona hore thapo ea USB ea CAC e hokahane le boema-kepe ba CAC bo ka morao ho yuniti.
Ha ho Video
- Sheba hore na lithapo tsohle tsa video li hokahane hantle.
- Hokela komporo ka kotloloho ho sebali ho netefatsa hore sebali le komporo ea hau li sebetsa hantle.
- Qala lik'homphieutha bocha.
Keyboard ha e sebetse
- Sheba hore na keyboard e hokahane hantle le yuniti.
- Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li hokahane hantle.
- Leka ho hokela USB komporong ho koung e 'ngoe.
- Etsa bonnete ba hore keyboard e sebetsa ha e hokahane ka kotloloho khomphuteng.
- Tlosa keyboard.
Hlokomela: Lipontšo tsa LED tsa NUM, CAPS, le SCROLL Lock tse ho keyboard ha lia lokela ho khantša haeba li hokahane le Secure KVM switch.
Peba ha e sebetse
- Sheba hore na mouse e hokahane hantle le yuniti.
- Leka ho hokela USB komporong ho koung e 'ngoe.
- Etsa bonnete ba hore mouse e sebetsa ha e hokahane ka kotloloho khomphuteng.
- Tlosa mouse.
Ha ho Audio
- Sheba hore na lithapo tsohle tsa molumo li hokahane hantle.
- Hokela libui ka ho toba khomphuteng ho netefatsa hore libui le molumo oa k'homphieutha li sebetsa hantle.
- Lekola litlhophiso tsa molumo komporong 'me u netefatse hore tlhahiso ea molumo e tsoa ka libui.
Ha ho CAC (COMMON ACCESS CARD, SMART CARD READER)
- Sheba hore na lithapo tsa USB tse hokahanyang yuniti le likhomphutha li hokahane hantle.
- Etsa bonnete ba hore boema-kepe ba CAC bo nolofalitsoe ka ho tobetsa konopo ea liteishene tse lakatsehang ho fihlela e khantša.
TŠEHETSO EA TEKHENIKI
Bakeng sa lipotso mabapi le sehlahisoa, lipotso tsa tiisetso, kapa lipotso tsa tekheniki, ka kopo ikopanye info@blackbox.com.
Ts'ehetso ea MAHALA ea tekheniki lihora tse 24 ka letsatsi, matsatsi a 7 ka beke: Letsetsa 877-877-2269 kapa fax 724-746-0746.
MOEKETSI TIISETSO
A. Boholo ba tiisetso e lekanyelitsoeng
Black Box e fana ka tumello ho bareki ba ho qetela hore sehlahisoa se boletsoeng ka holimo se ke ke sa e-ba le liphoso tsa thepa le moetso oa nako ea likhoeli tse 36, e leng nako e qalang ka letsatsi leo moreki a rekileng ka lona. Moreki o ikarabella ho boloka bopaki ba letsatsi la theko.
Tiisetso e lekanyelitsoeng ea Black Box e akaretsa feela liphoso tse hlahang ka lebaka la tšebeliso e tloaelehileng ea sehlahisoa, 'me ha e sebetse ho efe kapa efe:
a. Tlhokomelo e sa lokang kapa e sa lekaneng kapa diphetoho
b. Ts'ebetso e kantle ho litekanyetso tsa sehlahisoa
c. Tlhekefetso ea mechine le ho pepesehela maemo a matla
Haeba Black Box e amohela, nakong ea tiisetso e sebetsang, tsebiso ea bofokoli, Black Box ka boikhethelo ba eona e tla nka sebaka kapa ho lokisa sehlahisoa se nang le bothata. Haeba Black Box e sa khone ho khutlisa kapa ho lokisa sehlahisoa se nang le bothata bo koahetsoeng ke tiisetso ea Black Box ka nako e lekaneng, Black Box e tla khutlisa litšenyehelo tsa sehlahisoa.
Black Box ha e na tlameho ea ho lokisa, ho e khutlisa kapa ho khutlisa yuniti ho fihlela moreki a khutlisetsa sehlahisoa se nang le bothata ho Black Box.
Sehlahisoa sefe kapa sefe se ka nkelang sebaka se secha kapa sa tšoana le se secha, ha feela se na le tšebetso e lekanang le ea sehlahisoa se nkeloang sebaka.
Tiisetso e fokolang ea Black Box e sebetsa naheng efe kapa efe moo sehlahisoa se koahetsoeng se ajoang ke Black Box.
B. Meeli ea tiisetso
Ho isa moo ho lumelletsoeng ke molao oa lehae, Black Box kapa barekisi ba mekhatlo ea boraro ha ba fane ka tiisetso kapa maemo a mofuta ofe kapa ofe ho sa tsotellehe hore na o hlahisoa kapa o boleloa mabapi le sehlahisoa sa Black Box, 'me ka ho khetheha ba hana litiisetso kapa maemo a thekiso, boleng bo khotsofatsang, le ho phela hantle bakeng sa morero o itseng.
C. Mefokolo ea melato
Ho ea moo molao oa lehae o lumellang litlhare tse fanoeng setatementeng sena sa tiisetso ke bareki feela le liphekolo tse ikhethileng.
Ho isa tekanyong e lumelletsoeng ke molao oa lehae, ntle le boitlamo bo boletsoeng ka ho khetheha setatementeng sena sa tiisetso, ha ho ketsahalo eo Black Box kapa bafani ba eona ba mekha ea boraro ba tla ikarabella bakeng sa litšenyehelo tse tobileng, tse sa tobang, tse khethehileng, tsa tšohanyetso kapa tse ipapisitseng le konteraka, tort kapa khopolo efe kapa efe ea molao le hore na ho eletsoa ka monyetla oa tšenyo e joalo.
D. Molao oa lehae
Ho isa moo polelo ena ea tiisetso e sa lumellaneng le molao oa lehae, polelo ena ea tiisetso e tla nkoa e fetotsoe hore e lumellane le molao o joalo.
TLHOKOMELO
Black Box Corporation e ke ke ea ikarabella bakeng sa litšenyehelo tsa mofuta ofe kapa ofe, ho kenyeletsoa, empa e sa felle feela, kotlo, litlamorao kapa litšenyehelo tsa ts'enyehelo, e bakoang ke liphoso leha e le life tse mabapi le tlhahiso-leseling ea sehlahisoa kapa litlhaloso tse boletsoeng tokomaneng ena mme Black Box Corporation e ka ntlafatsa. tokomane ena ka nako efe kapa efe ntle le tsebiso.
MATSOSO
Black Box le mofuta oa logo ea Black Box le letšoao ke matšoao a khoebo a ngolisitsoeng a BB Technologies, Inc.
Matšoao afe kapa afe a mang a boletsoeng tokomaneng ena a amoheloa e le thepa ea beng ba matšoao a khoebo.
© COPYRIGHT 2022. BLACK BOX CORPORATION. LITOKELO TSOHLE LI SIRELELITSOE.
20180411
Mokhatlo oa Black Box
1000 Park Drive
Lawrence, PA 15055-1018
Mohala: 877-877-2269
www.blackbox.com
Litokomane / Lisebelisoa
 |
LEbokose le Letšo KVS4-1004VM Dp Mst Sireletsehile Kvm Switch [pdf] Bukana ea Mosebelisi KVS4-1004VM Dp Mst Secure Kvm Switch, KVS4-1004VM, Dp Mst Secure Kvm Switch, Secure Kvm Switch, Kvm Switch, Switch |