Modulet e Memories DDR4
“
Specifikimet
| Lloji i memories | DDR4 Desktop Memory (Unbuffered) |
|---|---|
| Kapacitetet e disponueshme | 8GB, 16GB (Single Module) |
| Frekuencat e disponueshme | 2666 MHz, 3200 MHz, 3600 MHz |
| Vëlltage | 1.2 V |
| Konfigurimi i pinit | 288-pin |
| Korrigjimi i gabimit | Non-ECC Unbuffered |
| I regjistruar | po |
| CAS Latente | CL21 (depending on frequency) |
| Faktori i formës | DIMM (Moduli i Memorjes së Dyfishtë në Rresht) |
| Përhapës i nxehtësisë | Aluminum heat spreader |
Përputhshmëria
Desktop motherboards with DDR4 slots.
Komponentët e pajtueshëm
Recommended Motherboards:
- Intel 600, 500, and 400 series chipsets (Z690, B660, H610,
Z590, B560, etc.) - AMD 500 and 400 series chipsets (X570, B550, X470, B450,
etj.) - Older chipsets that support DDR4 memory
Recommended Processors:
- Intel Core i3, i5, i7, i9 processors (10th, 11th, 12th, 13th
Gjeneral) - AMD Ryzen 3, 5, 7, 9 processors (3000, 4000, 5000 series)
Konfigurimi i memories
Për performancë optimale:
- Install memory in pairs for dual-channel operation (check
motherboard manual for correct slots) - For best results, use identical memory modules with same
capacity and frequency - Enable XMP/D.O.C.P. in BIOS to achieve advertised speeds
Shënim: Higher frequency memory (3600MHz) may
require a more recent CPU and motherboard to achieve full speed.
Always check your motherboard’s QVL (Qualified Vendor List) for
pajtueshmërinë.
Udhëzuesi i instalimit
- Paralajmërim: Always handle memory modules by the
edges. Avoid touching the gold contacts or components on the
circuit board. Static electricity can damage the memory, so use an
anti-static wrist strap when handling components. - 1. Power Down the System
Shut down the computer completely and disconnect all power cables
nga furnizimi me energji elektrike. - 2. Open the Computer Case
Remove the side panel of your computer case to access the
motherboard. - 3. Locate Memory Slots
Identify the memory slots on your motherboard. Consult your
motherboard manual for optimal slot population order (usually slots
2 and 4 for dual channel). - 4. Release Retention Clips
Open the retention clips at both ends of the memory slot by pushing
them outward. - 5. Align the Memory Module
Align the notch in the memory module with the key in the memory
slot to ensure proper orientation. - 6. Install the Memory
Firmly press down on the memory module until the retention clips
snap into place automatically. - 7. Repeat for Additional Modules
If installing multiple modules, repeat the process for each module,
following the motherboard’s recommended population sequence. - 8. Close the System
Replace the computer case panel, reconnect all cables, and power on
sistemin. - Shënim: After installing new memory, enter the
system BIOS/UEFI to verify that all memory is detected and enable
XMP/D.O.C.P. to achieve the advertised speed.
Pyetjet e bëra më shpesh (FAQ)
Q: Can I mix different capacities of KLLISRE Desktop DDR4
Memory modules?
A: While it is possible to mix different capacities, it is
recommended to use identical memory modules for optimal
performancës.
Q: Is it necessary to enable XMP/D.O.C.P. in BIOS after
installing KLLISRE Desktop DDR4 Memory?
A: Enabling XMP/D.O.C.P. in BIOS is recommended to achieve the
advertised speeds of the memory modules.
“`
KLLISRE Desktop DDR4 Memory
Manuali i përdoruesit dhe udhëzuesi i instalimit Shkarko si dokument Word
Produkti Mbiview
KLLISRE Desktop DDR4 Memory modules are designed for high-performance computing, offering excellent speed and reliability for gaming, content creation, and everyday computing tasks. These modules feature sleek heat spreaders for improved thermal performance and stability.
Specifikimet
Specifikimi Lloji i Memorjes Kapacitetet e Disponueshme Frekuencat e Disponueshme Volumitage Pin Configuration Error Correction Registered CAS Latency Form Factor Heat Spreader
Details DDR4 Desktop Memory (Unbuffered) 8GB,16GB (Single Module) 2666MHZ, 3200MHz, 3600MHz 1.2V 288-pin Non-ECC Unbuffered CL21 (depending on frequency) DIMM (Dual In-line Memory Module) Yes, aluminum heat spreader
Përputhshmëria
Desktop motherboards with DDR4 slots
Komponentët e pajtueshëm
Pllaka amë të rekomanduara
KLLISRE Desktop DDR4 Memory is compatible with a wide range of desktop motherboards:
Intel 600, 500, and 400 series chipsets (Z690, B660, H610, Z590, B560, etc.)
AMD 500 and 400 series chipsets (X570, B550, X470, B450, etc.) Older chipsets that support DDR4 memory
Procesorë të rekomanduar
This memory works with both Intel and AMD platforms:
Intel Core i3, i5, i7, i9 processors (10th, 11th, 12th, 13th Gen)
AMD Ryzen 3, 5, 7, 9 processors (3000, 4000, 5000 series)
Konfigurimi i memories
Për performancë optimale:
Install memory in pairs for dual-channel operation (check motherboard manual for correct slots)
For best results, use identical memory modules with same capacity and frequency
Enable XMP/D.O.C.P. in BIOS to achieve advertised speeds
Note: Higher frequency memory (3600MHz) may require a more recent CPU and motherboard to achieve full speed. Always check your motherboard’s QVL (Qualified Vendor List) for compatibility.
Udhëzuesi i instalimit
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the computer completely and disconnect all power cables from the power supply.
2 Open the Computer Case Remove the side panel of your computer case to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your motherboard. Consult your motherboard manual for optimal slot population order (usually slots 2 and 4 for dual channel).
4 Lironi Kapëset Mbajtëse Hapni kapëset mbajtëse në të dy skajet e vendit të memories duke i shtyrë ato nga jashtë.
5 Vendosni Modulin e Memories Vendosni prerjen në modulin e memories me çelësin në vendin e memories për të siguruar orientimin e duhur.
6 Instaloni memorien Shtypni fort modulin e memories derisa kapëset e mbajtjes të fiksohen automatikisht në vend.
7 Përsëriteni për Module Shtesë Nëse instaloni module të shumta, përsëriteni procesin për secilin modul, duke ndjekur sekuencën e popullimit të rekomanduar nga pllakën amë.
8 Close the System Replace the computer case panel, reconnect all cables, and power on the system.
Note: After installing new memory, enter the system BIOS/UEFI to verify that all memory is detected and enable XMP/D.O.C.P. to achieve the advertised speed.
Zgjidhja e problemeve
Sistemi nuk do të nisë pas instalimit
Possible causes: Improperly seated memory, incompatible memory, BIOS needs update.
Solutions: Reseat memory modules, clear CMOS, update motherboard BIOS to latest version.
U zbulua vetëm memorie e pjesshme
Shkaqe të mundshme: Memorie e vendosur në mënyrë të papërshtatshme, popullim i memories së papajtueshme, vend memorieje me defekt.
Zgjidhjet: Rivendosni modulet e memories, konsultohuni me manualin e pllakës amë për renditjen e duhur të vendosjes, provoni modulet në slote të ndryshme.
Memory Not Running at Advertised Speed (3200/3600MHz)
Why this happens: By default, DDR4 memory runs at a conservative JEDEC standard speed (usually 2133MHz or 2400MHz). To achieve the advertised higher speeds, you must enable the XMP (Extreme Memory Profile) for Intel systems or D.O.C.P. (Direct Overclock Profile) for AMD systems in the BIOS.
Other reasons: Some older CPUs or motherboards may not support higher memory speeds. The memory controller in your CPU has limitations, and motherboard topology can affect maximum achievable speed.
Zgjidhjet:
1. Enter BIOS/UEFI settings during boot (usually by pressing DEL or F2)
2. Find memory settings (often under “Advanced” or “Overclocking” menu)
3. Enable XMP (Intel) or D.O.C.P. (AMD)
4. Select the appropriate profile for your memory speed
5. Save changes and exit BIOS
6. If system becomes unstable, update BIOS to latest version
7. If problems persist, you may need to manually set speed and timings
Paqëndrueshmëria ose rrëzimi i sistemit
Shkaqet e mundshme: Cilësime të papajtueshme të kohëzimit të memories, mbinxehje, energji e pamjaftueshme.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy, test with one module at a time.
Blue Screen Errors
Possible causes: Memory compatibility issues,Processor incompatibility, incorrect timings.
Solutions: Test each module individually, run memory diagnostic tools (Windows Memory Diagnostic or MemTest86), adjust BIOS memory settings.
Shënim: Nëse problemet vazhdojnë, testoni secilin modul memorieje individualisht për të identifikuar modulet e mundshme me defekt. Kontaktoni mbështetjen e KLLISRE nëse dyshoni për një produkt me defekt.
Informacioni i Garancisë
KLLISRE Desktop DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
Për kërkesa garancie ose mbështetje teknike, ju lutemi kontaktoni mbështetjen e KLLISRE me detajet e blerjes suaj dhe një përshkrim të problemit.
Kjo garanci nuk mbulon dëmet që vijnë nga aksidenti, përdorimi i gabuar, abuzimi, instalimi i papërshtatshëm ose modifikimet e paautorizuara.
2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumentet / Burimet
 |
KLLISRE DDR4 Memory Modules [pdf] Manuali i Përdoruesit DDR4 Memory Modules, DDR4, Memory Modules, Modules |