KLLISRE DDR4 Modules Memory

Sehlahisoa se Felletseview

Li-module tsa KLLISRE Desktop DDR4 Memory li etselitsoe likhomphutha tse sebetsang hantle haholo, tse fanang ka lebelo le ts'epahalang bakeng sa papali, tlhahiso ea litaba, le mesebetsi ea letsatsi le letsatsi ea khomphutha. Li-modules tsena li na le li-spreaders tsa mocheso tse bobebe bakeng sa ts'ebetso e ntlafetseng ea mocheso le botsitso.

Litlhaloso

Tlhaloso	Lintlha
Mofuta oa memori	DDR4 Desktop Memory (E sa buffered)
Tse Fumanehang	8GB, 16GB (Mojule o le Mong)
Maqhubu a fumanehang	2666MHz, 3200MHz, 3600MHz
Moqtage	1.2V
Tlhotlhomiso ea Pin	288-phini
Phoso ea Phoso	E seng ECC
Ngodisitsoe	E se nang buffer
Bokamoso ba CAS	CL21 (ho ipapisitse le khafetsa)
Sebopeho sa Foromo	DIMM (Dual In-line Memory Module)
Sefate sa Mocheso	Yes, aluminum heat spreader

Ho lumellana
Li-motherboards tsa Desktop tse nang le li-slots tsa DDR4

Lisebelisoa tse lumellanang

Li-Motherboards tse khothalelitsoeng
KLLISRE Desktop DDR4 Memory e tsamaisana le mefuta e mengata ea liboto tsa li-desktop:

• Intel 600, 500, le 400 series chipsets (Z690, B660, H610, Z590, B560, joalo-joalo)
• AMD 500 le 400 series chipsets (X570, B550, X470, B450, joalo-joalo)
• Li-chipsets tsa khale tse tšehetsang mohopolo oa DDR4

Li-processor tse khothalelitsoeng
Mehopolo ena e sebetsa le li-platform tsa Intel le AMD ka bobeli:

• Intel Core i3, i5, i7, i9 processors (10th, 11th, 12th, 13th Gen)
• Li-processor tsa AMD Ryzen 3, 5, 7, 9 (3000, 4000, 5000 letoto)

Tlhophiso ea Memori

Bakeng sa tshebetso e ntlafetseng

• Kenya memori ka lipara bakeng sa ts'ebetso ea li-channel tse peli (sheba bukana ea boardboard bakeng sa li-slots tse nepahetseng)
• For best results, use identical memory modules with the same capacity and frequency
• Numella XMP/DOCP ho BIOS ho fihlela lebelo le phatlalalitsoeng

Hlokomela: Higher frequency memory (3600MHz) may require a more recent CPU and motherboard to achieve full speed. Always check your motherboard’s QVL (Qualified Vendor List) for compatibility.

Tataiso ea ho Kena

Tlhokomeliso: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components.

1. Tlosa Sisteme
   Koala komporo ka botlalo 'me u hakolle likhoele tsohle tsa motlakase phepelong ea motlakase.
2. Bula Taba ea Khomphutha
   Tlosa karolo e ka lehlakoreng ea k'hese ea komporo ea hau ho fihlella board ea mama.
3. Fumana Memori Slots
   Hlalosa libaka tsa memori ho motherboard ea hau. Sheba bukana ea hau ea boardboard bakeng sa tatellano e nepahetseng ea palo ea batho (hangata slots 2 le 4 bakeng sa liteishene tse peli).
4. Lokolla Likotwana tsa ho Boloka
   Bula likarolo tsa ho boloka lintlheng tse peli tsa slot ea memori ka ho li sutumelletsa kantle.
5. Lokisetsa Mojule oa Memori
   Lokisetsa notch mojulung oa memori le senotlolo se sekoting sa memori ho netefatsa hore ho na le tsela e nepahetseng.
6. Kenya Memori
   Firmly press down on the memory module until the retention clips snap into place automatically.
7. Pheta bakeng sa Mejule e Eketsehileng
   Haeba u kenya li-module tse ngata, pheta mokhoa ona bakeng sa mojule ka mong, ho latela tatellano ea palo e khothaletsoang ke boardboard.
8. Koala Sisteme
   Replace the computer case panel, reconnect all cables, and power on the system.

Hlokomela: After installing new memory, enter the system BIOS/UEFI to verify that all memory is detected and enable XMP/D.O.C.P. to achieve the advertised speed.

Ho batle phoso

Sistimi e ke ke ea qala ka mor'a ho kenya

• Lisosa tse ka bang teng: Improperly seated memory, incompatible memory, BIOS needs update.
• Litharollo: Reseat memory modules, clear CMOS, update motherboard BIOS to latest version.

Ho Fumaneha Mehopolo e sa Feleng

• Lisosa tse ka bang teng: Improperly seated memory, incompatible memory population, faulty memory slot.
• Litharollo: Reseat memory modules, consult motherboard manual for proper population order, try modules in different slots.

Mehopolo ha e Mathe ka Lebelo le Phatlalalitsoeng (3200/3600MHz)

• Why this happens: By default, DDR4 memory runs at a conservative JEDEC standard speed (usually 2133MHz or 2400MHz). To achieve the advertised higher speeds, you must enable the XMP (Extreme Memory Profile) bakeng sa litsamaiso tsa Intel kapa DOCP (Direct Overclock Profile) bakeng sa litsamaiso tsa AMD ho BIOS.
• Mabaka a mang: Some older CPUs or motherboards may not support higher memory speeds. The memory controller in your CPU has limitations, and motherboard topology can affect maximum achievable speed.

Litharollo

1. Kenya litlhophiso tsa BIOS/UEFI nakong ea boot (hangata ka ho tobetsa DEL kapa F2)
2. Fumana litlhophiso tsa memori (hangata tlasa "Advanced" kapa "Overclocking" menu)
3. Numella XMP (Intel) kapa DOCP (AMD)
4. Khetha pro e nepahetsengfile bakeng sa lebelo la memori ya hao
5. Boloka liphetoho ebe u tsoa BIOS
6. Haeba sistimi e fetoha e sa tsitsang, ntlafatsa BIOS ho mofuta oa morao-rao
7. Haeba mathata a ntse a tsoela pele, ho ka 'na ha hlokahala hore u ipehele lebelo le linako

Ho se tsitse ha Sisteme kapa Ho senyeha

• Lisosa tse ka bang teng: Incompatible memory timing settings, overheating, insufficient power.
• Litharollo: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy, test with one module at a time.

Liphoso tsa Blue Screen

• Lisosa tse ka bang teng: Memory compatibility issues, processor incompatibility, incorrect timings.
• Litharollo: Test each module individually, run memory diagnostic tools (Windows Memory Diagnostic or MemTest86), adjust BIOS memory settings.

Hlokomela: If problems persist, test each memory module individually to identify potential faulty modules. Contact KLLISRE support if you suspect a defective product.

Boitsebiso ba Warranty

• KLLISRE Desktop DDR4 Memory modules are covered by a one-year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
• Bakeng sa likopo tsa waranti kapa tšehetso ea tekheniki, ka kopo ikopanye le ts'ehetso ea KLLISRE ka lintlha tsa hau tsa theko le tlhaloso ea bothata.
• Tiisetso ena ha e kenyeletse tšenyo e bakiloeng ke kotsi, tšebeliso e mpe, tlhekefetso, ho kenya ts'ebetso e fosahetseng, kapa liphetoho tse sa lumelloeng.

© 2023 KLLISRE. Litokelo tsohle li sirelelitsoe. KLLISRE ke lets'oao la khoebo le ngolisitsoeng. Litlhaloso li ka fetoha ntle le tsebiso.

Lipotso Tse Botsoang Hangata

Can I mix different capacities of KLLISRE Desktop DDR4 Memory modules?

While it is possible to mix different capacities, it is recommended to use identical memory modules for optimal performance.

Is it necessary to enable XMP/D.O.C.P. in BIOS after installing KLLISRE Desktop DDR4 Memory?

Enabling XMP/D.O.C.P. in BIOS is recommended to achieve the advertised speeds of the memory modules.

Litokomane / Lisebelisoa

KLLISRE DDR4 Modules Memory [pdf] Bukana ea Mosebelisi DDR4 Memory Modules, DDR4, Memory Memory, Modules

Litšupiso

• Bukana ea Mosebelisi