snap maker Mashandisiro eZ-Axis Extension Module

Nhanganyaya
Iri igwara rekushandisa iyo Z-Axis Extension Module pane yako Snapmaker Yekutanga. Yakakamurwa kuita zvikamu zviviri:

1. Inopa ruzivo rwekugadzirisa.
2. Inoratidza kumisikidzwa kweSnapmaker Luban.

Zviratidzo Zvakashandiswa
Yambiro: Kufuratira rudzi urwu rwemeseji kunogona kukonzera kusashanda kana kukuvara kwemuchina uye kukuvara kwevashandisi
Cherechedza: Tsanangudzo dzaunofanirwa kuziva pamusoro pekuita

• Ita shuwa kuti chikamu chakasimbiswa chakatarisana nenzira kwayo.

Assembly

1. Ita shuwa kuti muchina wakadzimwa.
   Bvisa tambo dzose.
   Mirira maminitsi mashanu kuti muchina utonhore kana uchangopedza kudhinda.
2. Bvisa Filament Holder.
   • Bvisa iyo X-Axis
     (ine 3D Pinting Module yakabatanidzwa).
   • Bvisa Controller.
3. Bvisa iyo yapfuura Z-Axis.
   Batanidza iyo Z-Axis Extension Module (Z-Axis ipapo).
4. Batanidza Filament Holder paZ-Axis.
5. Batanidza iyo XAxis (ine 3D Printing Module yakanamatira) kuZ-Axis.
6. Batanidza Controller kuZ-Axis.
7. Batanidza tambo dzese dzisina kuvharwa muChikamu chekutanga.

Kugadziriswa kweLubann

1. Ita shuwa kuti firmware yako yakagadziridzwa kune yazvino 2.11, uye kuti Snapmaker Luban yakaiswa:
   https://snapmaker.com/product/snapmaker-original/downloads.
2. Batanidza PC yako nemuchina uchishandisa yakapihwa USB tambo, uye chinja simba.Cherechedza: Kana ukatadza kuwana serial port yemuchina wako, edza nekuisa CH340 mutyairi pa:
   https://snapmaker.com/product/snapmaker-original/dowloads.
3.  Tanga Snapmaker Luban.
   • Kubva kuruboshwe kuruboshwe, pinda Workspace
   •  Pamusoro kuruboshwe, tsvaga Connection uye tinya bhatani rerefresh kuti urodhe zvakare serial ports list
   • Dzvanya bhatani rekudonhedza pasi uye sarudza serial port yemuchina wako, wobva wadzvanya Batanidza.
4. Sarudza Tsika uye musoro wemidziyo wakabatana nemuchina kana wakurudzirwa.
5. Dzvanya Settings padivi rekuruboshwe, sarudza Machine Settings.
   • Nyora 125, 125, 221 zvakasiyana munzvimbo dzisina chinhu pasi pe X, Y, uye Z.
   • Pasi peZ axis Extension Module, tinya bhatani rekudonhedza uye sarudza On.
   • Dzvanya Save Changes.
6. Tinya Zvinodzora paTouchscreen, uye dzvanya Kumba AXes kuti umhanye musangano wekumba.
7. Simudza Mubhedha Unodziya. Kuti uwane mirairo yakadzama, tarisa kuKurumidza Kutanga Guide. Yako Z-Axis Extension Module yagadzirira kuenda.

Cherechedza: Kana muchina wako uri kushandisa 3D kudhinda Module, kuti uone kana kugadziridzwa kwabudirira, tora Settings About> Vaka Vhoriyamu paTouchscreen.

Zvinyorwa / Zvishandiso

snapmaker Mashandisiro eZ-Axis Extension Module [pdf] Installation Guide Mashandisiro eZ-Axis Extension Module, Z-Axis Extension Module, Extension Module, Module

References

• User Manual