snap txiag Yuav ua li cas Siv Z-Axis Extension Module

Lus qhuab ntuas
Nov yog phau ntawv qhia yuav ua li cas siv Z-Axis Extension Module ntawm koj Snapmaker Original. Nws muab faib ua ob ntu:

1. Muab cov ntaub ntawv ntawm kev sib dhos.
2. Ua qauv qhia kev teeb tsa ntawm Snapmaker Luban.

Siv Cov Cim
Ceev faj: Tsis quav ntsej hom lus no yuav ua rau muaj kev ua haujlwm tsis zoo lossis kev puas tsuaj ntawm lub tshuab thiab raug mob rau cov neeg siv
Daim ntawv ceeb toom: Cov ntsiab lus koj yuav tsum paub txog ntawm qhov txheej txheem

• Xyuas kom meej tias qhov hightlighted yog tig mus rau txoj kev yog.

Kev sib dhos

1. Xyuas kom tseeb tias lub tshuab yog powered.
   Tshem tag nrho cov cables.
   Tos li 5 feeb kom lub tshuab txias yog tias nws nyuam qhuav luam ntawv tiav lawm.
2. Detach lub Filament Holder.
   • Tshem tawm X-Axis
     (nrog 3D Pinting Module txuas).
   • Detach tus Controller.
3. Tshem tawm cov Z-Axis yav dhau los.
   Txuas Z-Axis Extension Module (Z-Axis tom qab ntawd).
4. Txuas lub Filament Holder rau Z-Axis.
5. Txuas lub XAxis (nrog 3D Printing Module txuas) rau Z-Axis.
6. Txuas tus Controller rau Z-Axis.
7. Txuas tag nrho cov cables unplugged hauv Kauj Ruam 1.

Configuration ntawm Lubann

1. Nco ntsoov tias koj lub firmware tau hloov kho mus rau qhov tseeb 2.11, thiab Snapmaker Luban tau teeb tsa:
   https://snapmaker.com/product/snapmaker-original/downloads.
2. Txuas koj lub PC nrog lub tshuab siv lub USB cable, thiab hloov lub hwj chim rau.Nco tseg: Yog tias koj tsis pom qhov chaw nres nkoj ntawm koj lub tshuab, sim thiab nruab CH340 tsav tsheb ntawm:
   https://snapmaker.com/product/snapmaker-original/dowloads.
3.  Launch Snapmaker Luban.
   • Los ntawm sab laug sidebar, nkag mus rau Chaw Ua Haujlwm
   •  Nyob rau sab laug sab saum toj, nrhiav Kev Txuas thiab nyem lub pob refresh kom rov qab sau cov npe ntawm cov chaw nres nkoj
   • Nias lub khawm nco-down thiab xaiv qhov chaw nres nkoj ntawm koj lub tshuab, thiab nyem Txuas.
4. Xaiv Custom thiab lub toolhead txuas nrog lub tshuab thaum raug ceeb toom.
5. Nyem Chaw nyob rau sab laug sidebar, xaiv Tshuab Chaw.
   • Hom 125, 125, 221 cais nyob rau hauv qhov chaw dawb huv hauv qab X, Y, thiab Z.
   • Nyob rau hauv Z axis Extension Module, nyem lub pob poob thiab xaiv On.
   • Nyem Txuag Hloov.
6. Coj mus rhaub Tswj ntawm lub Touchscreen, thiab coj mus rhaub Tsev AXes kom khiav ib qho kev sib tham homing.
7. Theem lub txaj txaj. Yog xav paub ntxiv cov lus qhia, mus rau Quick Start Guide. Koj lub Z-Axis Extension Module tam sim no npaj mus.

Nco tseg: Yog tias koj lub tshuab siv 3D luam ntawv Module, kom pom tias kev teeb tsa ua tiav, coj mus rhaub Chaw Hais Txog> Tsim ntim ntawm lub Touchscreen.

Cov ntaub ntawv / Cov ntaub ntawv

snapmaker Yuav ua li cas Siv Z-Axis Extension Module [ua pdf] Daim ntawv qhia kev teeb tsa Yuav Siv Z-Axis Extension Module, Z-Axis Extension Module, Extension Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv