User Manuals Simplified.
Browse answered questions about JLAB, including setup, troubleshooting, compatibility and maintenance.
Manuals+ is a platform for hosting product manuals and troubleshooting guides; we are not the manufacturer or the retailer, and we do not handle…
To type special characters like the pound sign (£) on the JLAB GO Keyboard, you must first ensure your keyboard is set to the…
感謝您的詳細說明。您所遇到的狀況（耳機在充電盒內仍自動連接藍牙）通常是因為充電盒未能正確偵測到左耳機已放入，導致耳機沒有自動關機並持續處於連線狀態。而出現「紫色閃爍燈號」通常是耳機同時顯示紅燈（充電中）與藍燈（尋找連線/配對）所產生的混合燈號。 既然您已經嘗試過清潔接點與多次手動重置（Manual Reset），建議您嘗試以下進一步的排查步驟： 檢查耳塞與耳掛位置： 請確認左耳機上的矽膠耳塞或耳掛沒有稍微位移。有時微小的位移會阻礙耳機完全貼合充電盒底部的金屬充電針（Pogo Pins）。 確認充電盒電量： 請確保充電盒本身擁有足夠電量。如果充電盒完全沒電，它將無法向耳機發出「已放入充電盒」的訊號，導致耳機保持開機並連接手機。 手動關機測試： 在將左耳機放入充電盒前，您可以嘗試透過手機藍牙設定手動斷開連線，或觀察耳機放入時是否有亮起代表充電的紅燈。 如果以上方法以及您先前做過的清潔與重置皆無法改善問題，這很可能是充電盒內部的偵測晶片或耳機硬體出現故障。由於 JLab 產品提供兩年保固，建議您聯繫原廠客服或購買管道進行售後檢測與出保換新： 官方聯絡信箱：support@jlab.com 官方支援網頁：jlab.com/contact
The JLab Go Pop+ earbuds do not store music internally; they play audio wirelessly from a connected Bluetooth device such as a smartphone, tablet,…
To reset your JLAB Studio+ (2AHYV-STUDIOP) headphones, follow these steps: Open your device's Bluetooth settings and "Forget" or remove JLab Studio+ from the list…
Based on the official manual and specifications for the JLab JBuds Sport ANC 4, there is no mention of built-in Tile finding technology. While…
While a physical diagram may be missing from your printed materials, the controls for the JLab Go Lux ANC Wireless Headphones are located on…
If you can hear callers but they cannot hear you on your JLAB GO Work 3, please check the following settings and controls: Check…
Yes, the JLab GO Work 3 features an adjustable headband. While the provided manual focuses primarily on electronic setup and controls, the product design…
The JLab Go Pop+ earbuds feature intuitive touch controls on each earbud to manage playback, calls, and sound modes. While the specific default mapping…
To increase the volume on your JLAB GO Air POP earbuds, you should use the right earbud. A single tap on the right earbud…
To recharge the JLab Go Sport+ charging case, follow these steps: Locate the Integrated Cable: The charging case features a built-in USB-C cable tucked…
JLab Go Sport earbuds do not have a dedicated "mute" or "microphone off" button on the earbuds themselves. To turn off the microphone during…
The JLAB GO Air POP earbuds are fully compatible with Apple iPhones, including the iPhone 13. They are true wireless earbuds and do not…
If your right JLab GO Air earbud is not producing sound and a standard reset has not resolved the issue, please try the following…
If your left JLab GO Air earbud is not producing sound, it may have lost its connection to the right earbud or your device.…
To ensure your JLab Go Pop ANC earbuds are quiet at night, you can use the Active Noise Cancelling (ANC) feature to block out…
Based on the JLAB Go Sports Plus manual, here are the steps to troubleshoot charging and connection issues: Clean the Charging Contacts: The most…
To charge the case for your JLab GO Sport+ earbuds, follow these steps: Connect the charging case to a computer or a USB power…
To pair a replacement left earbud with your existing JLab JBuds Air set, you must perform a manual reset to sync the two earbuds…
If one of your JLab GO Air earbuds is not turning on or connecting, it is usually due to a charging obstruction or a…
If one of your JLab GO Air earbuds is not turning on or connecting, please follow these troubleshooting steps to restore functionality: Check for…
If your JLab earbuds are not working, please try the following troubleshooting steps to resolve common connection or power issues: Check the Charge: Ensure…
Based on the JLab Epic Air user manual and standard product support guidelines, a physical break where metal components have detached inside the charging…
