Why is my JJC BTR-S1 remote connected to my Sony A7 III but the buttons are not working?
If your JJC BTR-S1 is paired but the buttons are not functioning, please check the following settings on your Sony A7 III: Check the…
Manuals+ Q&A
Product questions & answers
Find setup, troubleshooting and compatibility answers. Browse questions by topic or open the questions linked to your product manual.
Browse topics
Latest answered questions
Newest questionsHow do I fix a Midland T51C (T50 Series) radio that is stuck on channel 9 on the T50 Owner\'s Manual (Rev B) Layout 1?
If your Midland T50 Series (T51C) radio is stuck on channel 9 and will not change, it is likely that the Keypad Lock is…
Why won't my Hompow ET108 portable charger take a charge even after trying two different power sources?
If your Hompow ET108 portable charger is not accepting a charge from multiple power sources, please try the following troubleshooting steps: Check the Cable:…
How do I disassemble the top of the Movols MO-5804PN security camera?
The official manual for the Movols MO-5804PN security camera system does not provide instructions for disassembling the camera housing. These cameras are designed with…
Why is my Panasonic SD-YR2550 bread maker not starting even though the display is on?
If your Panasonic SD-YR2550 display is illuminated but the machine will not start when you press the button, please check the following common causes…
How many times should I rinse the Euhomy Ice Maker with fresh water after using a cleaner, and should the first batch of ice be discarded?
Based on the Euhomy Ice Maker User Manual, here are the recommended steps for rinsing and resuming ice production after cleaning: Rinsing: The manual…
How do I turn off the voice help feature on the Ingenico Axium DX8000 terminal?
The manual provided is for the DCCStands SIL-DX8000-B Silicone Sleeve, which is a physical protective accessory and does not have electronic settings or voice…
How do I fix the error when the alarm light turns on on my Unicraft PG-E 90 TEA generator?
When the alarm light (often associated with the oil warning system or an overload condition) illuminates on a Unicraft PG-E series generator like the…
How can I reduce the initial volume of the Yayusi S2 speaker radio when it turns on, especially since it starts very loud even if the last listened station was at a low volume?
Unfortunately, without the specific manual for the Yayusi S2 speaker radio, it's difficult to provide exact instructions on how to reduce the startup volume.…
How can I lubricate a sticky or resistive main focus knob on Bushnell Legend Ultra-HD 8x42 binoculars?
The official Bushnell Legend Series Instruction Manual does not provide instructions for user-performed lubrication of the focus mechanism. Because these binoculars are nitrogen-purged and…
Could you please send the full user manual for the EAFC J12 Car Jump Starter in electronic format?
You can access the full electronic instruction manual for the EAFC Car Jump Starter (Model J12) directly on Manuals+ at the following link: EAFC…
How do I connect and set up the heating mode on the Argo Snappy Local Air Conditioner?
To use the Argo Snappy in heating mode, you must physically rotate the unit and swap the hose connections. Follow these steps: Rotate the…
Where can I find the assembly manual for the WEUYUIAF Titanic Mini Building Blocks Model 8808?
The WEUYUIAF Titanic Mini Building Blocks Model 8808 is a complex kit with over 4,100 pieces, and a physical printed manual is typically included…
How can I reduce the display brightness of the Yayusi S2 Bluetooth Speaker to a very low level?
According to the Yayusi S2 Bluetooth Speaker manual, the device has a specific button for adjusting light levels. To adjust the brightness, you should…
How do you connect the 4 wires (white, yellow, red, black) for the CYC-SK31 winch remote control?
Based on the standard wiring configuration for this type of winch remote control receiver (CYC-SK31), the four wires are typically connected as follows: Red:…
Why does the thermostat continue heating even after reaching the set temperature?
If your GENERAL Life HT250S continues to heat past your set temperature, please check the following troubleshooting steps: Check the Mode: Ensure the device…
Can the Yayusi S2 Bluetooth Speaker be left constantly plugged into the mains?
The manual for the Yayusi S2 Bluetooth Speaker does not explicitly state whether the device can be left constantly plugged into the mains. However,…
How do I change the temperature units from Celsius to Fahrenheit on the AIRAIN TECH ARNT02WS300 weather station?
To change the temperature units on your AIRAIN TECH ARNT02WS300 weather station, please follow these steps based on the component you are adjusting: Remote…
What are the specifications for the charger used with the Toshiba TY-ASC65 Portable Bluetooth Speaker?
The Toshiba TY-ASC65 uses a power adapter that connects to the speaker's power input port to charge its internal 12 Volt 4Ah rechargeable battery.…
How do I fix the calendar day to match the date on my EVILTO Digital Projection Alarm Clock (Model DS182)?
Based on the manual for the EVILTO Digital Projection Alarm Clock, there is no manual "Day of the Week" setting. This type of clock…
What are the three selection settings on the RAVINE FIELDOPS PRO earbuds?
Based on the RAVINE FIELDOPS PRO User Manual, the earbuds feature an Ambient Listening Mode that allows you to hear your surroundings while maintaining…
Where is the SD card slot on my device?
Without knowing the specific device or model you are referring to, it's impossible to tell you exactly where the SD card slot is located.…
How do I program the BN-LINK BNE-60/U167 timer to turn off a device every day at 11:30 PM?
To program your BN-LINK BNE-60/U167 timer to turn off your TV every day at 11:30 PM, follow these steps: Enter Programming Mode: Press the…
Why is the coil light turning red on my Innokin Endura M18?
On the Innokin Endura M18, the LED indicators communicate battery life and wattage settings rather than specific coil errors. If you are seeing a…