iSMACONTROLLI SFAR-S-16RO Modbus Input And Output Module
KULAMBIRA
| KULAMBIRA | ||
| Magetsi | Voltage | 10-38 V DC; 10-28 V AC |
| Kugwiritsa ntchito mphamvu | 4,8 W @ 24 V DC 7 VA @ 24 V AC | |
| Zotulutsa zopatsirana | Zotulutsa za 16x Relay | |
| Katundu wosamva AC1: 3 A @ 230 V AC kapena 3 A @ 30 V DC | ||
| Katundu wochititsa chidwi AC3. 75 VA @ 230 V AC kapena 30 W @ 30 V DC | ||
| Lumikizanani ndi AgSnO2 | ||
| Chiyankhulo | RS485, mpaka zida 128 m'basi | |
| Kuthamangitsa | 2400 mpaka 115200 bps | |
| Chitetezo cha ingress | IP40 - kukhazikitsa m'nyumba | |
| Kutentha | Kugwira ntchito -10 ° C - +50 ° C; Kusungirako -40°C – +85°C | |
| Chinyezi chachibale | 5 mpaka 95% RH (popanda condensation) | |
| Zolumikizira | Kutalika kwa 2.5 mm2 | |
| Dimension | 119,1 mm x 101 mm x 22,6 mm | |
| Kukwera | Kuyika njanji ya DIN (DIN EN 50022) | |
| Zida zapanyumba | Pulasitiki, PC/ABS yozimitsa yokha | |
GULU LAPANSI 
ZOTSATIRA ZINA 
KULANKHULANA
MAGETSI
CHENJEZO
- Zindikirani, mawaya olakwika a mankhwalawa amatha kuwononga ndikubweretsa zoopsa zina. Onetsetsani kuti chinthucho chalumikizidwa bwino ndi mawaya musanayatse magetsi.
- Musanayike mawaya, kapena kuchotsa/kuyika chinthucho, onetsetsani kuti mwazimitsa magetsi. Kulephera kutero kungayambitse kugwedezeka kwamagetsi.
- Osakhudza mbali zokhala ndi magetsi monga ma terminals. Kuchita zimenezi kungayambitse kugwedezeka kwamagetsi.
- Osagawanitsa mankhwalawo. Kuchita zimenezi kungayambitse kugunda kwa magetsi kapena ntchito yolakwika.
- Gwiritsani ntchito zinthu zomwe zili mkati mwa magawo omwe akulimbikitsidwa malinga ndi momwe zimakhalira (kutentha, chinyezi, voltage, kugwedezeka, kukwera kolowera, mlengalenga etc.). Kulephera kutero kungayambitse moto kapena ntchito yolakwika.
- Mangitsani mawaya ku terminal. Kumangika kosakwanira kwa mawaya kutheminali kungayambitse moto.
ZOTSATIRA ZA CHIPANGA 
Kulowa kolembetsa
| Modbus | Dec | Hex | Register Dzina | Kufikira | Kufotokozera |
| 30001 | 0 | 0x00 pa | Mtundu/mtundu | Werengani | Version ndi mtundu wa |
| 30002 | 1 | 0x01 pa | Masinthidwe | Werengani | Kusintha dziko |
| 40003 | 2 | 0x02 pa | Mtengo wamtengo | Werengani & Lembani | Mtengo wa baud RS485 |
| 40004 | 3 | 0x03 pa | Imani Bits & Data Bits | Werengani & Lembani | Palibe zoyimitsa & data |
| 40005 | 4 | 0x04 pa | Parity | Werengani & Lembani | Parity pang'ono |
| 40006 | 5 | 0x05 pa | Kuchedwa Kuyankha | Werengani & Lembani | Kuchedwa kuyankha mu ms |
| 40007 | 6 | 0x06 pa | Modbus Mode | Werengani & Lembani | Modbus mode (ASCII kapena |
| 40009 | 8 | 0x08 pa | Woyang'anira | Werengani & Lembani | Woyang'anira |
| 40013 | 12 | Zamgululi | Default Output State | Werengani & Lembani | Default zotuluka |
|
40033 |
32 |
0x20 pa |
Mapaketi olandirira LSR (Osafunikira Reg.) |
Werengani & Lembani |
Palibe mapaketi omwe adalandira |
|
40034 |
33 |
0x21 pa |
Mapaketi olandila a MSR (Ofunika Kwambiri Reg.) |
Werengani & Lembani |
|
| 40035 | 34 | 0x22 pa | Mapaketi olakwika a LSR | Werengani & Lembani | Palibe mapaketi omwe adalandiridwa ndi zolakwika |
| 40036 | 35 | 0x23 pa | Mapaketi olakwika a MSR | Werengani & Lembani | |
| 40037 | 36 | 0x24 pa | Anatumiza mapaketi LSR | Werengani & Lembani |
Palibe mapepala otumizidwa |
| 40038 | 37 | 0x25 pa | Anatumiza mapaketi MSR | Werengani & Lembani | |
| 40052 | 51 | 0x33 pa | Zotsatira | Werengani & Lembani | Zotulutsa |
LANGIZO ZOYAMBIRA
- Chonde werengani malangizowo musanagwiritse ntchito kapena kugwiritsa ntchito chipangizocho. Ngati muli ndi mafunso mutawerenga chikalatachi, chonde lemberani Gulu Lothandizira la iSMA CONTROLLI
- (support@ismacontrolli.com).
- Musanayike mawaya kapena kuchotsa/kuyika chinthucho, onetsetsani kuti mwathimitsa magetsi. Kulephera kutero kungayambitse kugunda kwamagetsi.
- Mawaya olakwika a mankhwalawa amatha kuwononga ndikuyambitsa zoopsa zina. Onetsetsani kuti chinthucho chalumikizidwa bwino ndi mawaya musanayatse magetsi.
- Osakhudza mbali zokhala ndi magetsi monga ma terminals. Kuchita zimenezi kungayambitse kugunda kwa magetsi.
- Osagawanitsa mankhwalawo. Kuchita zimenezi kungayambitse kugunda kwa magetsi kapena ntchito yolakwika.
- Gwiritsani ntchito mankhwalawo mkati mwa magawo omwe akulimbikitsidwa malinga ndi momwe amafotokozera (kutentha, chinyezi, voltage, kugwedezeka, komwe kumakwera, mlengalenga, etc.). Kulephera kutero kungayambitse moto kapena ntchito yolakwika.
- Mangitsani mawaya ku terminal. Kulephera kutero kungayambitse moto.
- Pewani kuyika chinthucho pafupi ndi zida zamagetsi zamphamvu kwambiri ndi zingwe, katundu wolowera, ndi zida zosinthira. Kuyandikira kwa zinthu zoterezi kungayambitse kusokoneza kosalamulirika, zomwe zimapangitsa kuti mankhwalawa asagwiritsidwe ntchito.
- Kukonzekera koyenera kwa mphamvu ndi ma signal cabling kumakhudza ntchito ya dongosolo lonse lolamulira. Pewani kuyala mphamvu ndi mawaya azizindikiro mu thireyi za chingwe zofananira. Zingayambitse zosokoneza mu kuyang'anitsitsa ndi kulamulira zizindikiro.
- Ndikofunikira kuti owongolera mphamvu / ma module omwe ali ndi othandizira magetsi a AC/DC. Amapereka kutchinjiriza kwabwino komanso kokhazikika kwa zida poyerekeza ndi makina osinthira a AC/AC, omwe amatumiza chisokonezo ndi zochitika zosakhalitsa monga ma surges ndi kuphulika kwa zida. Amalekanitsanso zinthu kuchokera kuzinthu zochititsa chidwi kuchokera ku zosintha zina ndi katundu.
- Makina opangira magetsi azinthu ayenera kutetezedwa ndi zida zakunja zochepetsa kuchulukirachulukiratage ndi zotsatira za kutulutsa mphezi.
- Pewani kupatsa mphamvu mankhwalawo ndi zida zake zoyendetsedwa / zoyang'aniridwa, makamaka mphamvu zazikulu komanso zonyamula katundu, kuchokera ku gwero limodzi lamphamvu. Zida zopangira mphamvu kuchokera ku gwero limodzi lamagetsi zimayambitsa chiopsezo choyambitsa zosokoneza kuchokera ku katundu kupita ku zida zowongolera.
- Ngati thiransifoma ya AC/AC ikugwiritsidwa ntchito popereka zida zowongolera, tikulimbikitsidwa kugwiritsa ntchito thiransifoma yopitilira 100 VA Class 2 kuti mupewe zotsatira zosafunikira, zomwe ndizowopsa pazida.
- Kuwunika kwautali ndi kuwongolera mizere kungayambitse malupu okhudzana ndi magetsi omwe amagawana nawo, zomwe zimayambitsa kusokonezeka pakugwira ntchito kwa zipangizo, kuphatikizapo kulankhulana kwakunja. Ndi bwino kugwiritsa ntchito galvanic separators.
- Kuti muteteze mizere yolumikizirana ndi magineti yakunja, gwiritsani ntchito zingwe zotetezedwa bwino ndi mikanda ya ferrite.
- Kusintha kwamagetsi otulutsa a digito a katundu wamkulu (kupitilira momwe amafotokozera) kungayambitse kusokoneza kwamagetsi omwe amayikidwa mkati mwa chinthucho. Choncho, tikulimbikitsidwa kugwiritsa ntchito ma relay / ma contactor akunja, ndi zina zotero kuti musinthe katundu wotere. Kugwiritsiridwa ntchito kwa olamulira okhala ndi zotsatira za triac kumachepetsanso kuwonjezereka kofananatagndi zochitika.
- Nthawi zambiri zosokoneza ndi kuchulukirachulukiratage in control systems amapangidwa ndi masinthidwe, inductive katundu woperekedwa ndi alternating mains vol.tage (AC 120/230 V). Ngati alibe mabwalo oyenera ochepetsera phokoso, ndi bwino kugwiritsa ntchito mabwalo akunja monga snubbers, varistors, kapena ma diode oteteza kuti achepetse izi.
- Kuyika magetsi kwa mankhwalawa kuyenera kuchitidwa motsatira malamulo a wiring a dziko ndikugwirizana ndi malamulo a m'deralo.
- iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy
- support@ismacontrolli.com
- www.ismacontrolli.com
- Upangiri Woyika| 1st Rev. 1 | 05/2022
Zolemba / Zothandizira
 |
iSMACONTROLLI SFAR-S-16RO Modbus Input And Output Module [pdf] Buku la Malangizo SFAR-S-16RO Modbus Modbus Input And Output Module, SFAR-S-16RO, Modbus Input And Output Module, Input and Output Module, Output Module, Module |
