Cov ntsiab lus
zais
iSMACONTROLLI SFAR-S-16RO Modbus Input Thiab Output Module
SPECIFICATION
| SPECIFICATION | ||
| Fais fab mov | Voltage | 10-38 V DC; 10-28V AC |
| Kev siv fais fab | 4,8W @ 24V DC 7 VA @ 24 V AC | |
| Relay tso zis | 16 x Relay outputs | |
| Resistive AC 1: 3 A @ 230 V AC lossis 3 A @ 30 V DC | ||
| Inductive load AC3. 75 VA @ 230 V AC lossis 30 W @ 30 V DC | ||
| Cov ntaub ntawv tiv tauj AgSnO2 | ||
| Interface | RS485, mus txog 128 cov khoom siv hauv tsheb npav | |
| baud nqi | Los ntawm 2400 txog 115200 bps | |
| Ingress tiv thaiv | IP40 - rau kev teeb tsa sab hauv tsev | |
| Kub | Ua haujlwm -10 ° C - + 50 ° C; Cia -40 ° C - +85 ° C | |
| txheeb ze humidity | 5-95% RH (tsis muaj condensation) | |
| Cov khoom sib txuas | Max 2.5 hli 2 | |
| Dimension | 119,1 mm x 101 mm x 22,6 mm | |
| Mounting | DIN rail mounting (DIN EN 50022) | |
| Cov khoom siv tsev | Yas, self-extinguishing PC/ABS | |
Sab saum toj VAJ HUAM SIB LUAG 
RELAY OUTPUTS 
Kev sib txuas lus
POWER SUPPLY
CEEB TOOM
- Nco ntsoov, kev xaim tsis raug ntawm cov khoom no tuaj yeem ua rau nws puas tsuaj thiab ua rau muaj kev phom sij. Xyuas kom tseeb tias cov khoom tau raug xaim kom raug ua ntej tig lub hwj chim ON.
- Ua ntej xaim, lossis tshem tawm / txuas cov khoom, nco ntsoov tig lub hwj chim OFF. Tsis ua li ntawd yuav ua rau hluav taws xob poob siab.
- Tsis txhob kov cov khoom siv hluav taws xob xws li lub hwj chim terminals. Ua li no yuav ua rau hluav taws xob poob siab.
- Tsis txhob disassemble cov khoom. Ua li no yuav ua rau hluav taws xob poob lossis ua haujlwm tsis raug.
- Siv cov khoom nyob rau hauv cov kev khiav hauj lwm ntau yam pom zoo nyob rau hauv lub specification (kub, humidity, voltage, poob siab, mounting kev taw qhia, cua thiab lwm yam). Tsis ua li ntawd yuav ua rau hluav taws kub lossis ua haujlwm tsis raug.
- Tighten cov xov hlau rau lub davhlau ya nyob twg. Kev nruj tsis txaus ntawm cov xov hlau mus rau lub davhlau ya nyob twg yuav ua rau hluav taws kub.
TERMINALS ntawm cov khoom siv 
Sau npe nkag
| Modbus | Dec | Hex | Sau npe | Nkag mus | Kev piav qhia |
| 30001 | 0 | 0 x 00 | Version/Type | Nyeem | Version thiab hom ntawm lub |
| 30002 | 1 | 0 x 01 | Hloov | Nyeem | Hloov lub xeev |
| 40003 | 2 | 0 x 02 | Baud tus nqi | Nyeem & Sau | RS485 baud tus nqi |
| 40004 | 3 | 0 x 03 | Stop Bits & Data Bits | Nyeem & Sau | Tsis muaj qhov nres cov khoom & cov ntaub ntawv |
| 40005 | 4 | 0 x 04 | Parity | Nyeem & Sau | Parity me ntsis |
| 40006 | 5 | 0 x 05 | Teb qeeb | Nyeem & Sau | Teb qeeb hauv ms |
| 40007 | 6 | 0 x 06 | Modbus hom | Nyeem & Sau | Modbus hom (ASCII los yog |
| 40009 | 8 | 0 x 08 | Saib xyuas | Nyeem & Sau | Saib xyuas |
| 40013 | 12 | 0x0 wb | Default Output State | Nyeem & Sau | Default output state |
|
40033 |
32 |
0 x 20 |
Tau txais pob ntawv LSR (tseem ceeb heev Reg.) |
Nyeem & Sau |
Tsis tau txais cov pob ntawv |
|
40034 |
33 |
0 x 21 |
Tau txais pob ntawv MSR (Qhov Tseem Ceeb Tshaj Plaws) |
Nyeem & Sau |
|
| 40035 | 34 | 0 x 22 | Cov pob ntawv tsis raug LSR | Nyeem & Sau | Tsis tau txais pob ntawv nrog yuam kev |
| 40036 | 35 | 0 x 23 | Cov pob ntawv tsis raug MSR | Nyeem & Sau | |
| 40037 | 36 | 0 x 24 | Xa pob ntawv LSR | Nyeem & Sau |
Tsis muaj cov ntawv xa tuaj |
| 40038 | 37 | 0 x 25 | Xa pob ntawv MSR | Nyeem & Sau | |
| 40052 | 51 | 0 x 33 | Cov zis | Nyeem & Sau | Lub xeev tso zis |
INSTALLATION GUIDELINE
- Thov nyeem cov lus qhia ua ntej siv lossis ua haujlwm ntawm lub cuab yeej. Yog tias muaj lus nug tom qab nyeem daim ntawv no, thov hu rau iSMA CONTROLLI Support Team
- (support@ismacontrolli.com).
- Ua ntej xaim lossis tshem tawm / txhim kho cov khoom, nco ntsoov tig lub hwj chim tawm. Tsis ua li ntawd yuav ua rau muaj hluav taws xob poob siab.
- Kev xaim tsis raug ntawm cov khoom tuaj yeem ua rau nws puas tsuaj thiab ua rau muaj kev phom sij. Xyuas kom tseeb tias cov khoom tau raug xaim kom raug ua ntej tig lub hwj chim.
- Tsis txhob kov cov khoom siv hluav taws xob xws li cov khoom siv hluav taws xob. Ua li no yuav ua rau muaj hluav taws xob poob siab.
- Tsis txhob disassemble cov khoom. Ua li no yuav ua rau muaj hluav taws xob poob lossis ua haujlwm tsis raug.
- Siv cov khoom tsuas yog nyob rau hauv kev khiav hauj lwm ntau yam pom zoo nyob rau hauv cov specification (kub, humidity, voltage, poob siab, mounting kev taw qhia, cua, thiab lwm yam). Tsis ua li ntawd yuav ua rau hluav taws kub lossis ua haujlwm tsis raug.
- Tighten cov xov hlau rau lub davhlau ya nyob twg. Tsis ua li ntawd yuav ua rau muaj hluav taws kub.
- Tsis txhob txhim kho cov khoom nyob ze rau cov khoom siv hluav taws xob muaj zog thiab cov cables, cov khoom siv hluav taws xob, thiab cov khoom siv hloov pauv. Qhov sib thooj ntawm cov khoom zoo li no tuaj yeem ua rau muaj kev cuam tshuam tsis zoo, uas ua rau kev ua haujlwm tsis ruaj khov ntawm cov khoom.
- Kev npaj kom zoo ntawm lub zog thiab cov teeb liab cabling cuam tshuam rau kev ua haujlwm ntawm tag nrho cov kev tswj hwm. Tsis txhob tso lub hwj chim thiab teeb liab xaim rau hauv cov kab sib txuas. Nws tuaj yeem ua rau muaj kev cuam tshuam hauv kev soj ntsuam thiab tswj cov teeb liab.
- Nws raug pom zoo rau cov tswj fais fab / modules nrog AC / DC fais fab mov. Lawv muab cov rwb thaiv tsev zoo dua thiab ruaj khov dua rau cov khoom siv piv rau AC / AC transformer systems, uas xa cov kev cuam tshuam thiab qhov tshwm sim tsis zoo xws li surges thiab tawg rau cov khoom siv. Lawv kuj cais cov khoom ntawm inductive phenomena los ntawm lwm yam transformers thiab loads.
- Fais fab mov systems rau cov khoom yuav tsum muaj kev tiv thaiv los ntawm cov khoom siv sab nraud txwv overvoltage thiab cov teebmeem ntawm xob laim tawm.
- Tsis txhob siv cov khoom siv hluav taws xob thiab nws cov khoom siv tswj / saib xyuas, tshwj xeeb tshaj yog lub zog siab thiab inductive loads, los ntawm ib qho chaw fais fab. Cov khoom siv hluav taws xob los ntawm ib qho chaw siv hluav taws xob ua rau muaj kev pheej hmoo ntawm kev qhia kev cuam tshuam los ntawm cov khoom thauj mus rau cov khoom siv tswj.
- Yog tias AC / AC transformer siv los muab cov khoom siv tswj, nws raug pom zoo kom siv qhov siab tshaj 100 VA Class 2 transformer kom tsis txhob muaj qhov cuam tshuam tsis zoo, uas yog qhov txaus ntshai rau cov khoom siv.
- Kev saib xyuas ntev thiab tswj cov kab yuav ua rau muaj kev sib txuas nrog cov khoom siv hluav taws xob sib koom, ua rau muaj kev cuam tshuam hauv kev ua haujlwm ntawm cov khoom siv, suav nrog kev sib txuas lus sab nraud. Nws raug nquahu kom siv galvanic separators.
- Txhawm rau tiv thaiv cov teeb liab thiab cov kab sib txuas lus tiv thaiv kev cuam tshuam ntawm cov hluav taws xob sab nraud, siv cov kab hluav taws xob tiv thaiv zoo thiab cov hlaws ferrite.
- Hloov cov khoom tso tawm digital relays loj (ntau tshaj qhov tshwj xeeb) inductive loads tuaj yeem ua rau cuam tshuam pulses rau cov khoom siv hluav taws xob hauv cov khoom. Yog li ntawd, nws raug nquahu kom siv cov khoom siv sab nraud / cov neeg sib txuas, thiab lwm yam los hloov cov loads. Kev siv cov controllers nrog triac outputs kuj txwv zoo sib xws overvoltage phenomena.
- Muaj ntau yam kev cuam tshuam thiab overvoltage nyob rau hauv kev tswj systems yog generated los ntawm switched, inductive loads muab los ntawm alternating mains voltage (AC 120/230V). Yog tias lawv tsis muaj qhov tsim nyog tsim hluav taws xob txo qhov hluav taws xob, nws raug nquahu kom siv cov hluav taws xob sab nraud xws li snubers, varistors, lossis tiv thaiv diodes kom txwv cov teebmeem no.
- Kev teeb tsa hluav taws xob ntawm cov khoom no yuav tsum tau ua raws li cov cai hauv lub tebchaws thiab ua raws li cov cai hauv zos.
- iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Ltalis
- support@ismacontrolli.com
- www.ismacontrolli.com
- Installation Guideline| 1st Issue Rev. 1 | 05/2022
Cov ntaub ntawv / Cov ntaub ntawv
 |
iSMACONTROLLI SFAR-S-16RO Modbus Input Thiab Output Module [ua pdf] Phau ntawv qhia SFAR-S-16RO Modbus Input Thiab Output Module, SFAR-S-16RO, Modbus Input Thiab Output Module, Input Thiab Output Module, Output Module, Module |
