Imixholo
fihla
i-iSMACONTROLLI SFAR-S-16RO Imodyuli yokuNgena kunye neNjongo yeModbus
INGCACISO
| INGCACISO | ||
| Ukunikezwa Amandla | Umqulutage | 10-38 V DC; 10-28 V AC |
| Ukutya umbane | 4,8 W @ 24 V DC 7 VA @ 24 V AC | |
| Relay iziphumo | 16x Relay iziphumo | |
| Umthwalo oxhathisayo AC1: 3 A @ 230 V AC okanye 3 A @ 30 V DC | ||
| Umthwalo osebenzayo AC3. 75 VA @ 230 V AC okanye 30 W @ 30 V DC | ||
| Izinto zoqhagamshelwano AgSnO2 | ||
| Ujongano | RS485, ukuya kuthi ga kwizixhobo ezili-128 ebhasini | |
| izinga lobubi | Ukusuka kwi-2400 ukuya kwi-115200 bps | |
| Ukhuseleko lokungena | IP40 – yofakelo lwangaphakathi | |
| Ubushushu | Ukusebenza -10 ° C - +50 ° C; Ugcino -40°C – +85°C | |
| Ubuntu bezizalwane | I-5 ukuya kwi-95% ye-RH (ngaphandle kokudibanisa) | |
| Izihlanganisi | Ubukhulu 2.5 mm2 | |
| Ubungakanani | 119,1 mm x 101 mm x 22,6 mm | |
| Ukunyuka | I-DIN yokunyuswa kukaloliwe (DIN EN 50022) | |
| Izinto zendlu | Iplastiki, iPC/ABS ezicimayo | |
IPhaneli ephezulu 
IZIPHUMO ZOKUNIKEZELELA 
UNXIBELELWANO
UKUNIKEZWA AMANDLA
ISILUMKISO
- Qaphela, i-wiring engalunganga yale mveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe ngokuchanekileyo iintambo phambi kokuba uvule umbane.
- Phambi kocingo, okanye ukususa/ukunyuswa kwemveliso, qiniseka ukuba Ucime umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
- Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
- Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
- Sebenzisa imveliso ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, ukothuka, indlela yokunyuka, umoya, njl. njl.). Ukusilela ukwenza oko kunokubangela umlilo okanye umsebenzi ongalunganga.
- Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungaqini ngokwaneleyo kweengcingo kwitheminali kunokubangela umlilo.
IZITHOMBE ZESIXHOBO 
Ufikelelo olubhalisiweyo
| Modbus | Disemba | Hex | Bhalisa Igama | Ukufikelela | Inkcazo |
| 30001 | 0 | 0x00 | Uguqulelo/Uhlobo | Funda | Inguqulelo kunye nodidi lwe |
| 30002 | 1 | 0x01 | Iiswitshi | Funda | Itshintsha imo |
| 40003 | 2 | 0x02 | Ireyithi yeBaud | Funda & Bhala | Ixabiso le-baud RS485 |
| 40004 | 3 | 0x03 | Misa amasuntswana kunye neeBits zeDatha | Funda & Bhala | Akukho kwamasuntswana okumisa & data |
| 40005 | 4 | 0x04 | Ukulingana | Funda & Bhala | Ubunzima |
| 40006 | 5 | 0x05 | Ukulibaziseka kwempendulo | Funda & Bhala | Ukulibaziseka kwempendulo kuNks |
| 40007 | 6 | 0x06 | Indlela yeModbus | Funda & Bhala | Imowudi yeModbus (ASCII okanye |
| 40009 | 8 | 0x08 | Umlindi | Funda & Bhala | Umlindi |
| 40013 | 12 | Ngama-0x0C | Imeko yesiphumo esiMiselweyo | Funda & Bhala | Imeko yemveliso ehlala ikho |
|
40033 |
32 |
0x20 |
Iipakethi ezifunyenweyo ze-LSR (Ubuncinci buBalulekileyo.) |
Funda & Bhala |
Inani leepakethi ezifunyenweyo |
|
40034 |
33 |
0x21 |
Iipakethi ezifunyenweyo ze-MSR (Ezona nkcukacha ziBalulekileyo.) |
Funda & Bhala |
|
| 40035 | 34 | 0x22 | Iipakethe ezingalunganga ze-LSR | Funda & Bhala | Inani lepakethi ezifunyenweyo ezinempazamo |
| 40036 | 35 | 0x23 | Iipakethe ezingalunganga ze-MSR | Funda & Bhala | |
| 40037 | 36 | 0x24 | Iipakethi ezithunyelweyo ze-LSR | Funda & Bhala |
Inani leepakethi ezithunyelweyo |
| 40038 | 37 | 0x25 | Iipakethi ezithunyelweyo ze-MSR | Funda & Bhala | |
| 40052 | 51 | 0x33 | Iziphumo | Funda & Bhala | Imeko yemveliso |
ISIKHOKELO SOKUFAKA
- Nceda ufunde imiyalelo phambi kokuba usebenzise okanye usebenzise isixhobo. Kwimeko yayo nayiphi na imibuzo emva kokufunda olu xwebhu, nceda uqhagamshelane neQela leNkxaso le-iSMA CONTROLLI
- (support@ismacontrolli.com).
- Ngaphambi kocingo okanye ukususa / ukunyuswa kwemveliso, qiniseka ukuba ucima umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
- I-wiring engafanelekanga yemveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe iintambo ngokuchanekileyo phambi kokuba uvule umbane.
- Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
- Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
- Sebenzisa imveliso kuphela ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, umothuko, indlela yokunyuka, umoya, njl. njl.). Ukungakwenzi oko kunokubangela umlilo okanye umsebenzi onempazamo.
- Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungakwenzi oko kunokubangela umlilo.
- Kuphephe ukufaka imveliso kwindawo ekufutshane nezixhobo zombane ezinamandla aphezulu kunye neentambo, imithwalo yokungenisa, kunye nezixhobo zokutshintsha. Ukusondela kwezinto ezinjalo kunokubangela ukuphazamiseka okungalawulwayo, okukhokelela ekusebenzeni okungazinzanga kwemveliso.
- Ukulungelelaniswa okufanelekileyo kwamandla kunye ne-signal cabling kuchaphazela ukusebenza kwayo yonke inkqubo yokulawula. Kuphephe ukubeka amandla kunye neengcingo zomqondiso kwiitreyi zentambo ezihambelanayo. Inokubangela ukuphazamiseka kwiimpawu ezibekwe esweni kunye nokulawula.
- Kunconywa kubalawuli bamandla / iimodyuli kunye nababoneleli bamandla be-AC / DC. Banikezela nge-insulation engcono kwaye ezinzileyo yezixhobo xa kuthelekiswa neenkqubo ze-AC / AC ze-transformer, ezihambisa ukuphazamiseka kunye neziganeko ezidlulayo ezifana nokunyuka kunye nokuqhuma kwizixhobo. Bakwahlukanisa iimveliso ezivela kwi-inductive phenomena kwezinye ii-transformers kunye nemithwalo.
- Iinkqubo zonikezelo lwamandla kwimveliso kufuneka zikhuselwe zizixhobo zangaphandle ezinciphisa ukugqithiswa kombanetage kunye neziphumo zokukhutshwa kombane.
- Gwema ukunika amandla imveliso kunye nezixhobo ezilawulwayo / ezibekwe esweni, ngakumbi amandla aphezulu kunye nemithwalo ye-inductive, ukusuka kumthombo wamandla omnye. Izixhobo zamandla ezivela kumthombo wamandla omnye zibangela umngcipheko wokwazisa ukuphazamiseka kwimithwalo ukuya kwizixhobo zokulawula.
- Ukuba i-AC / AC i-transformer isetyenziselwa ukubonelela ngezixhobo zokulawula, kucetyiswa ngamandla ukuba kusetyenziswe ubuninzi be-100 VA Class 2 transformer ukuphepha imiphumo engafunekiyo ye-inductive, eyingozi kwizixhobo.
- Imigca emide yokubeka iliso kunye nokulawula inokubangela iilophu malunga nokunikezelwa kwamandla okwabelwana ngawo, okubangela ukuphazamiseka ekusebenzeni kwezixhobo, kubandakanywa unxibelelwano lwangaphandle. Kunconywa ukusebenzisa i-galvanic separators.
- Ukukhusela umqondiso kunye nemigca yonxibelelwano ngokuchasene nokuphazamiseka kwe-electromagnetic yangaphandle, sebenzisa iintambo ezikhuselekileyo eziphantsi kunye namaso e-ferrite.
- Ukutshintshela ukuhanjiswa kwemveliso yedijithali yemithwalo emikhulu (egqithileyo) imithwalo ye-inductive kunokubangela ukuphazamiseka kwe-pulses kumbane ofakwe ngaphakathi kwemveliso. Ngoko ke, kucetyiswa ukuba kusetyenziswe ii-relays zangaphandle / abafowunelwa, njl njl ukutshintsha imithwalo enjalo. Ukusetyenziswa kwabalawuli abaneziphumo ze-triac kwakhona kunciphisa ukugqithisa okufanayotage iziganeko.
- Iimeko ezininzi zokuphazamiseka kunye nokugqithisatagkwiisistim zolawulo ziveliswa ngokutshintshwa, imithwalo ye-inductive enikezelwa ngokutshintshana kwee-mains vol.tage (AC 120/230 V). Ukuba abanazo iisekethe ezifanelekileyo ezakhelwe ngaphakathi zokunciphisa ingxolo, kucetyiswa ukuba kusetyenziswe iisekethe zangaphandle ezifana ne-snubbers, i-varistors, okanye i-diode yokukhusela ukunciphisa ezi ziphumo.
- Ukufakwa kombane kule mveliso kufuneka kwenziwe ngokuhambelana neekhowudi zocingo zelizwe kwaye zihambelane nemimiselo yendawo.
- iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy
- support@ismacontrolli.com
- www.ismacontrolli.com
- Isikhokelo soFakelo | 1st Umba Rev. 1 | 05/2022
Amaxwebhu / Izibonelelo
 |
i-iSMACONTROLLI SFAR-S-16RO Imodyuli yokuNgena kunye neNjongo yeModbus [pdf] Incwadi Yomyalelo SFAR-S-16RO iModyuli yokuNgena kunye neNkalo yeModyuli yeModbus, SFAR-S-16RO, imodyuli yeModyuli yokuNgena kunye neNoutpulo, iModyuli yokuNgena kunye nePhumo, iModyuli yokuPhuma, iModyuli |
