Okuqukethwe fihla
I-iSMACONTROLLI SFAR-S-16RO Modbus Input And Output Module
INKCAZO
| INKCAZO | ||
| Ukunikezwa kwamandla kagesi | Voltage | 10-38 V DC; 10-28 V AC |
| Ukusetshenziswa kwamandla | 4,8 W @ 24 V DC 7 VA @ 24 V AC | |
| Edluliselwe okukhiphayo | Okuphumayo kwe-16x Relay | |
| Umthwalo omelene ne-AC1: 3 A @ 230 V AC noma 3 A @ 30 V DC | ||
| I-inductive load AC3. 75 VA @ 230 V AC noma 30 W @ 30 V DC | ||
| Thintana nezinto ze-AgSnO2 | ||
| Isixhumi esibonakalayo | RS485, kufikela kumadivayisi ayi-128 ebhasini | |
| I-Baudrate | Ukusuka ku-2400 kuya ku-115200 bps | |
| Ukuvikelwa kwe-Ingress | IP40 – yokufakwa endlini | |
| Izinga lokushisa | Ukusebenza -10°C - +50°C; Isitoreji -40°C – +85°C | |
| Umswakama ohlobene | 5 kuya ku-95% RH (ngaphandle kokufingqa) | |
| Izixhumi | Ubukhulu 2.5 mm2 | |
| Ubukhulu | 119,1 mm x 101 mm x 22,6 mm | |
| Ukukhweza | Ukukhweza ujantshi we-DIN (DIN EN 50022) | |
| Impahla yezindlu | Ipulasitiki, iPC/ABS ezicishayo | |
IPhaneli Eliphezulu 
IMIPHUMELA YOKUDLULISANA 
UKUXHUMANA
UKUNIKEZWA KWAMANDLA KAGESI
ISEXWAYISO
- Qaphela, izintambo ezingalungile zalo mkhiqizo zingawulimaza futhi ziholele kwezinye izingozi. Qiniseka ukuthi umkhiqizo ufakwe izintambo ngendlela efanele ngaphambi kokuvula amandla.
- Ngaphambi kokufaka izintambo, noma ukukhipha/ukukhweza umkhiqizo, qiniseka ukuthi UVALE amandla. Ukwehluleka ukwenza lokho kungase kubangele ukushaqeka kukagesi.
- Ungazithinti izingxenye ezishajwe ngogesi njengamatheminali kagesi. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi.
- Ungawuhlakazi umkhiqizo. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi noma ukusebenza kabi.
- Sebenzisa umkhiqizo ngaphakathi kwamabanga okusebenza anconyiwe ekucacisweni (izinga lokushisa, umswakama, voltage, ukushaqeka, isiqondiso esikhuphukayo, umkhathi njll.). Ukwehluleka ukwenza kanjalo kungase kubangele umlilo noma ukusebenza okungalungile.
- Qinisa izintambo ngokuqinile kutheminali. Ukungaqini okwanele kwezintambo kutheminali kungase kubangele umlilo.
AMATHEMINA EDIVAYISI 
Ukufinyelela okubhalisiwe
| I-modbus | Dec | Hex | Bhalisa Igama | Ukufinyelela | Incazelo |
| 30001 | 0 | 0x00 | Inguqulo/Uhlobo | Funda | Inguqulo kanye nohlobo lwe |
| 30002 | 1 | 0x01 | Ukushintsha | Funda | Ishintsha isimo |
| 40003 | 2 | 0x02 | Isilinganiso se-Baud | Funda & Ubhale | Izinga le-baud RS485 |
| 40004 | 3 | 0x03 | Misa amabhithi nedatha | Funda & Ubhale | Inani lama-stop bits nedatha |
| 40005 | 4 | 0x04 | Ukulingana | Funda & Ubhale | Ubunye kancane |
| 40006 | 5 | 0x05 | Ukubambezeleka Kokuphendula | Funda & Ubhale | Ukulibaziseka kwempendulo ku-ms |
| 40007 | 6 | 0x06 | Imodi ye-Modbus | Funda & Ubhale | Imodi ye-Modbus (ASCII noma |
| 40009 | 8 | 0x08 | I-Watchdog | Funda & Ubhale | I-Watchdog |
| 40013 | 12 | 0x0c | Isimo Sokuphuma Esizenzakalelayo | Funda & Ubhale | Isimo sokuphumayo esizenzakalelayo |
| 40033 | 32 | 0x20 | Amaphakethe atholiwe i-LSR (Inombolo Engabalulekile Kancane.) | Funda & Ubhale | Inombolo yamaphakethe atholiwe |
| 40034 | 33 | 0x21 | Amaphakethe atholiwe i-MSR (Isibhali Esibaluleke Kakhulu.) | Funda & Ubhale | |
| 40035 | 34 | 0x22 | Amaphakethe angalungile LSR | Funda & Ubhale | Inani lamaphakethe atholiwe anephutha |
| 40036 | 35 | 0x23 | Amaphakethe angalungile we-MSR | Funda & Ubhale | |
| 40037 | 36 | 0x24 | Amaphakethe athunyelwe i-LSR | Funda & Ubhale | Inombolo yamaphakethe athunyelwe |
| 40038 | 37 | 0x25 | Amaphakethe athunyelwe i-MSR | Funda & Ubhale | |
| 40052 | 51 | 0x33 | Imiphumela | Funda & Ubhale | Isimo sokuphumayo |
UMHLAHLANDLELA WOKUFAKA
- Sicela ufunde imiyalelo ngaphambi kokusebenzisa noma ukusebenzisa idivayisi. Uma unemibuzo ngemva kokufunda lo mbhalo, sicela uthinte Ithimba Losekelo le-iSMA CONTROLLI
- (support@ismacontrolli.com).
- Ngaphambi kokufaka izintambo noma ukukhipha/ukukhweza umkhiqizo, qiniseka ukuthi ucisha ugesi. Ukwehluleka ukwenza lokho kungase kubangele ukushaqeka kukagesi.
- Izintambo ezingalungile zomkhiqizo zingawulimaza futhi ziholele kwezinye izingozi. Qiniseka ukuthi umkhiqizo ufakwe izintambo ngendlela efanele ngaphambi kokuvula amandla.
- Ungazithinti izingxenye ezishajwe ngogesi njengamatheminali kagesi. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi.
- Ungawuhlakazi umkhiqizo. Ukwenza kanjalo kungase kubangele ukushaqeka kukagesi noma ukuhlinzwa okunephutha.
- Sebenzisa umkhiqizo kuphela ngaphakathi kwamabanga okusebenza anconyiwe esimisweni (izinga lokushisa, umswakama, voltage, ukushaqeka, isiqondiso esikhuphukayo, umkhathi, njll.). Ukwehluleka ukwenza kanjalo kungase kubangele umlilo noma ukuhlinzwa okunephutha.
- Qinisa izintambo kutheminali. Ukwehluleka ukwenza kanjalo kungase kubangele umlilo.
- Gwema ukufaka umkhiqizo eduze nezinsiza zikagesi ezinamandla amakhulu namakhebuli, imithwalo ye-inductive, nemishini yokushintsha. Ukuba seduze kwezinto ezinjalo kungase kubangele ukuphazamiseka okungalawuleki, okuholela ekusebenzeni okungazinzile komkhiqizo.
- Ukuhlelwa kahle kwamandla kanye ne-signal cabling kuthinta ukusebenza kwalo lonke uhlelo lokulawula. Gwema ukubeka amandla kanye nezintambo zesignali kumathreyi ekhebula ahambisanayo. Kungabangela ukuphazamiseka kumasignali agadwayo nokulawula.
- Kunconywa ukunika amandla izilawuli/amamojula nabahlinzeki bamandla be-AC/DC. Zihlinzeka ngokufakwa okungcono nezime kakhulu kumadivayisi uma kuqhathaniswa nezinhlelo zesiguquli se-AC/AC, ezidlulisa iziphazamiso nezimo zesikhashana njengokuhlinza nokuqhunyiswa kumadivayisi. Baphinde bahlukanise imikhiqizo ku-inductive phenomena kwamanye ama-transformer nemithwalo.
- Amasistimu wokuphakelwa kwamandla omkhiqizo kufanele avikelwe ngamadivayisi angaphandle abeka umkhawulo wokudlula ngokweqiletage kanye nemiphumela yokuphuma kombani.
- Gwema ukunika amandla umkhiqizo kanye nemishini yawo elawulwayo/egadiwe, ikakhulukazi amandla aphezulu kanye nemithwalo ye-inductive, kusukela kumthombo wamandla owodwa. Ukunika amandla amadivaysi avela kumthombo owodwa wamandla kubangela ingozi yokwethula ukuphazamiseka kusuka emithwalweni kuya kumadivayisi okulawula.
- Uma isiguquli se-AC/AC sisetshenziselwa ukunikeza amadivayisi okulawula, kutuswa ngokuqinile ukusebenzisa isiguquli esiphezulu esingu-100 VA Class 2 ukuze kugwenywe imiphumela engadingeki yokungenisa, eyingozi kumadivayisi.
- Imigqa emide yokuqapha nokulawula ingase ibangele izihibe ngokuphathelene nokunikezwa kwamandla okwabelwana ngawo, okubangela ukuphazamiseka ekusebenzeni kwamadivayisi, kuhlanganise nokuxhumana kwangaphandle. Kunconywa ukusebenzisa izihlukanisi ze-galvanic.
- Ukuze uvikele imigqa yesignali neyokuxhumana ekuphazamisekeni kozibuthe kagesi kwangaphandle, sebenzisa izintambo ezivikelwe kahle kanye nobuhlalu be-ferrite.
- Ukushintsha ama-relay okukhiphayo edijithali kwemithwalo emikhulu ye-inductive (edlule ukucaciswa) kungabangela ukuphazamiseka kugesi ofakwe ngaphakathi komkhiqizo. Ngakho-ke, kunconywa ukusebenzisa ama-relay / oxhumana nabo bangaphandle, njll ukushintsha imithwalo enjalo. Ukusetshenziswa kwezilawuli ezinokuphuma kwe-triac nakho kukhawulela ukuqhuma okufanayotage izenzakalo.
- Amacala amaningi okuphazamiseka nokugcwala ngokweqiletagama-e kumasistimu okulawula akhiqizwa ngokushintshwa, imithwalo ye-inductive ehlinzekwa yi-alternating mains voltage (AC 120/230 V). Uma bengenawo amasekhethi okunciphisa umsindo akhelwe ngaphakathi afanelekile, kuyanconywa ukusebenzisa amasekhethi angaphandle njengama-snubber, ama-varistors, noma ama-diode okuvikela ukuze ukhawulele le miphumela.
- Ukufakwa kukagesi kwalo mkhiqizo kufanele kwenziwe ngokuhambisana namakhodi ezintambo kazwelonke futhi kuhambisane nemithetho yendawo.
- iSMA CONTROLLI SpA – Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy
- support@ismacontrolli.com
- www.ismacontrolli.com
- Umhlahlandlela Wokufaka| 1st Issue rev. 1 | 05/2022
Amadokhumenti / Izinsiza
 | I-iSMACONTROLLI SFAR-S-16RO Modbus Input And Output Module [pdf] Incwadi Yeziqondiso I-SFAR-S-16RO Modbus Imojula Yokokufaka Nokuphumayo, i-SFAR-S-16RO, Imojula ye-Modbus Okokufaka Nokuphumayo, Imojula Yokokufaka Nokuphumayo, Imojula Yokuphumayo, Imojula |
